Windows Mail could not be started because another instance of it is still running on your computer

Similar Questions

• error message: windows mail could not be started because another instance of it is still ongoing?

  "windows mail could not start because another instance of it is still running on YOUR computer." Pls. log off windows, and then restart windows Messaging. If the problem persists, save UR work and restart YOUR computer. The computer (Dell inspiron 531 s) that I had for 2 years and no has not given any problems trying to open windows mail until a week ago.

  Would appreciate your thoughts on how to fix this problem I continually have to close and restart.

  Thank you.

  In addition to Ajay has suggested, try to repair the database (www.oehelp.com/WMUtil/) and use its suggestions to determine which program is responsible for run Winmail on its own.  Also check 3rd party, such as antivirus, program interferences.  See www.oehelp.com/OETips.aspx#3
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  "windows mail could not start because another instance of it is still running on YOUR computer." Pls. log off windows, and then restart windows Messaging. If the problem persists, save UR work and restart YOUR computer. The computer (Dell inspiron 531 s) that I had for 2 years and no has not given any problems trying to open windows mail until a week ago.

  Would appreciate your thoughts on how to fix this problem I continually have to close and restart.

  Thank you.

• Windows Mail could not be started because MSOERES. DLL is not found

  Original title: Windows Mail

  I use Windows Vista and I suddenly have the following problems, when I try to open Windows Mail, a message

  «Windows Mail could not be started because MSOERES.» DLL is not found.

  Also, I noticed that all my games of Microsoft Windows have disappeared at the same time, ideas? : Monty

  Hey Monty,

  Follow the suggestions below for a possible solution:

  Method 1: You can go ahead and perform a restore of the system to a point before the show, then check to see if that fixes the problem.

   

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

   

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

   

  Method 2: I suggest you perform a system of operating in Place Upgrade to Windows 7 and check if that helps. See the following link for upgrade on site.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

   http://support.Microsoft.com/kb/2255099

   

  Note: You can take backup of the data on an external hard drive that you can lose data when you perform the upgrade on the spot. It is essential to back up data even if you do an upgrade on the spot.

  Let us know the results.

• Windows Mail does not open. It gives me a message saying, ' Windows Mail could not be started because MSOE. " DLL could not be loaded. »

  My Windows Mail does not open.  It gives me a message saying, ' Windows Mail could not be started because MSOE. " DLL could not be loaded. "How can I fix in order to regain access to my e-mail address?

  The only other thing I can suggest is to back up and then delete the following registry keys:

  HKEY_CURRENT_USER\Identities

  HKEY_CURRENT_USER\Software\Microsoft\Windows Mail

  I start with the first and then see if it works.  If this isn't the case, then delete them both.

  Steve

• Windows Mail could not be started because MSOE. He'S could not be loaded

  Click on my windows mail on my desktop icon, but raise pop above

  Click on my windows mail on my desktop icon, but raise pop above

  3 proposals:

  1. If this problem is not more than 15 days, and if you remember a good date when you did not have this problem, please do a system restore. Choose this good date as your restore point:
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  2. If the system restore does not work, use this program, WMutil, repair your database.
  http://www.oehelp.com/WMUtil/
  MAK you read ALL instructions, including those within the 'red' zone

  3 install Windows Live Mail (WLM) and be done with Windows Mail (WM). Wil WLM and WM times coexist. Just make WLM as your default e-mail client. When installing WLM, all data (emanils, contacts etc tec) will be transferred from WM to WLM automatically. Don'tt you have to do a thing about export/import.
  Here is the download link for WLM 2011:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1c1e75dc-3ccb-46a5-A804-f7803987718c

  PS You must have Service Pack 2, SP2 installed before installing WLM 2011.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows Mail could not be started. Initialize junk filtering. Your computer may be out of memory or your disk is full. (0 x 80070002)

  Original title: Windows Mail (Vista).

  Windows Mail could not be started.  Initialize junk filtering. Your computer may be out of memory or your disk is full. (0 x 80070002) next: Windows mail could not be started because MSOE. DLL could not be initialized.   My program is Windows Mail (Vista) not Windows Live Mail.

  Problem solved: I set Windows Live Mail as the default program.  Everything works now.

• Windows Live Mail could not be started because msmail.dll could not be loaded. What should I do?

  Start Windows Live Mail

  Windows Live Mail could not be started because msmail.dll could not be loaded.  What should I do?

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Windows live mail could not be started because msmail.dll could not be loaded

  Hello, I received an error message "windows live mail could not be started because msmail.dll could not be loaded" what can I do for her? Please help me. Thanks to you all

  Hi keeewi,

  The question you have posted is related to Hotmail and would be better suited to the community of Windows live.

  Please visit the link below to find a community that will provide the support you want.

  http://www.windowslivehelp.com/product.aspx?ProductID=15

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Speech recognition in Windows 7 could not be started because the lauguage configuration is not supported

  I looked at what others have said to solve this problem, but it still doesn't work. I changed the language and then restarted then changed back, I went in the regional language settings and change those, but so far, nothing has worked. I made the train together your computer once again and that works but then I try to open the program and it gives me the same statement again on the configuration not supported. Any help with the situation?

  Did you go to the control panel - language to see if your language is listed here? Also, what language you want to use? Speech recognition is only available for the following languages:

  English (United States and United Kingdom)

  French

  German

  Japanese

  Mandarin (Chinese simplified and Chinese traditional)

  Spanish

  Marty Markoe, MyMSSpeech

• Error - Windows Live Mail could not be started because msmail.dll could not be loaded and one or more system DLL could not be loaded esapp.dll.

  Original title:. DLL does not charge any suggestions?

  ESAPP. DLL, MSMAIL. DLL does not load

  Hi KennethJenks,

  When exactly do you get these error messages?

  You can uninstall the KODAK EASYSHARE software from Add / Remove Programs and reinstall it back. Later, check to see if the problem persists.

  Due to Windows Live Mail, I recommend you ask your question to the Windows Live Mail support for assistance.

  Hope the helps of information.
  Please post back and we do know.

• Error Windows Live Mail: Windows Live Mail could not be started. The application could not open Windows Live Mail, mailbox messages.

  original title: Windows Live Mail

  I am trying to send messages on my own page of email, but windows live mail does not accept my emails.

  The message I get is as follows:
  Windows Live Mail could not be started. The application could not open Windows Live Mail, mailbox messages. My Windows Live Mail mailbox data is currently used by another program, such as a virus scanner.

  I need to close the program or wait for it to complete its operation and then reopen Windows Live Mail. Are the numbers that I get this message: (0x800c0455, 997) then I ok this message and receive another message.

  Windows Live Mail could not be started because. MSmail.dll could not be initialized.
  Windows Live Mail may not be installed correctly.

  Can you please help me settle this question, as I have a lot of mail to be sent to my e-mail address?

  Hello Annie,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Windows Live Mail could not be started. 0 x 80041161. question of server 2008 in Vista (similar OS) forum

  Can't solve this one.  8 user accounts on Server 2008 std 64 bit TS, using the Protocol of the DRC. Load Windows Live, composing Mail only for all users. Properly configured the e-mail accounts for all users except one.  On this account while trying to open the Live Mail, we get:

  "Windows Live Mail could not be started.  It cannot be installed correctly. Make sure that your disk is not full or that you're not out of memory. 0 x 80041161."

  All accounts connect via thin clients with user, no HD local licenses. How it is possible for a single user? How to remove all traces of this user's e-mail account and try again? 7 other user accounts were active mail.  A possible cause would be my use of a registry cleaner (perhaps not a good idea because it was not necessary for a specific reason).  Otherwise, nothing unusual, all other services Terminal Server and programs work.  Impossible to find a link to how to erase our all that is giving only this user account for Live Mail error message.  Tried to take Windows Live and not reinstalled, pass.  All users have standard access, raise that this user admin didn't change error.  Appreciate the ideas.

  Hello

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the Technet Forum.

  You can follow this link to ask your question:

  http://social.technet.Microsoft.com/search/en-us/Windows?query=server%202008&refinement=1002&beta=0&AC=5

  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Windows Live Mail could not be started. The application could not open the Windows Live Mail message store error code: 0x800C0155

  Origianl title: windows live does not open

  My Windows Live Mail has recently stopped working, by double-clicking on the desktop icon top of page does not open the program, appears it the "Windows Live Mail" logo and then a message saying:-"Windows Live Mail could not be started. The application could not open the Windows Live Mail message store. Your Windows Live Mail mailbox is currently being used by another program, such as a virus scanner. close the program or wait so he could complete its operation, then open Windows Live Mail again. (0x800C0155).

  I tried to reinstall WLM, restore my computer, remove anti virus protection. Nothing works

  Help, please!

  Hi B Clinton,

  For a more specialized on issue of Windows Live Mail help, send your query on the Windows Live Forum.

  Windows Live Forum -http://windowslivehelp.com/

• Server process could not be started because the configured identity is incorrect (massive failure Windows 7)

  I had worked in Vista x 64 for more than a year and upgraded to Windows 7 x 64 Ultimate a week ago. IT has worked so far and things suddenly got completely screwed up without obvious reason. I'm into the following loop, where I can't go out:

  1. after booting, two minutes is spent with the message "waiting for Group Policy Client" (normal startup takes less than a minute).

  2. once I enter the password, it passes to another two minutes with "Please wait for the user profile Service...". "(normally, the connection is instant)

  3. I'm connected (I am administrator), but a lot of things is false:

  -Without Aero. Single base type GUI Windows 2000 gray

  -Lack of network

  -A bubble message appears in the status bar:
  Unable to connect to a windows service
  Windows could not connect to the service user profile Service.
  This problem prevents standard users to log on the system...

  -Almost nothing works. Attempts to start to explore causes this error message:
  SOLUTION EXPLORER. EXE
  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  -Try to start the Panel of results in the following dialog box:
  Window title: {26ee0668-a00a-44d7-9371-beb064c98683}
  Message:
  {26ee0668-a00a-44d7-9371-beb064c98683}
  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  -Try to start most of the results of Windows programs in the variation of the above two messages

  -Event log is not functional. I am able to start-> Run-> Services and don't start all services of the event log, but it always says "The event log Service is unavailable".

  4. the things I have already tried and that has NOT worked:

  -System Restore to a point a few days ago when everything worked did not help
  -When you log on under different user accounts (administrator or not administrator), I have the same symptoms.
  -Try to re - install Windows 7 from the DVD fails - it says "source is no longer available...". "or something like that

  That did not help.

  In safe mode, the same problem occurred - cannot do anything and get the same error - "...". configured identity is incorrect... ».
  There is no missing or damaged file.

  in any case, thanks for responding.

  I was hoping that Windows 7 would solve the problems of stability of Vista, but I was wrong - things are even worse.
  It was the last straw - I decided to empty Windows and had Ubuntu Linux.

• Windows Server 2008, the server process could not be started because the configured identity is incorrect. Check the user name and password.

  When I started and connect to the windows 2008 Server and when trying to open any folder I get the below error message:

  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  Please give me your entries for this problem.

  Kind regards

  Shankar Kale
  

  Hi Shankar,

  The question you posted would be better suited in the TechNet Forums. See the link.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Hope this information helps.