Windows Mail works with Vista Home Premium?

Similar Questions

• Satellite L350 - cannot get the keyboard to work with Vista Home Premium

  I just reinstalled Vista Home Premium 32 bit but can not get the keyboard works. I tried to connect an external keyboard with the same results. I checked the disk manager that says that the driver is working OK I wonder if it could be a problem of system or a hardware problem.

  Any help would be welcome

  Jim

  Try the external USB keyboard.
  If it works correctly, then the internal keyboard works bad and must be replaced.

• Windows mail pop of vista Home premium ups

  • I get an e-mail from windows popping up all the time, it frustrates me because I try and play a game etc and it comes on for no reason, I turned off and now I get a pop up screen saying it can't connect to windows mail... I don't care if he can't connect because I don't want the bloody thing... no idea what to do next?
  Hello
   
  
  1. do you get an error message when you receive the message that Windows is unable to connect to windows mail?
   
   
  The only way to disable the Windows Mail in Windows Vista is by political group. Group Policy is not available in Windows Vista Home premium.
   
  I ask you to perform a clean boot to verify which application trying to start Windows Mail.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Installer does not work with Vista Home Premium 32-bit system.

  My computer did not an automatic update in over 6 months.  I discovered this when I could not install my tax preparation software.  the error message is gone "windows installer does not work, a file may be damaged, contact support windows technique.»

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  sfc/scannow
  

  For the results of the SFC
   
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

  The system update tool

  Ensures the consistency of the folder WinSxS (Side by Side).

  http://Windows.Microsoft.com/en-AU/Windows7/what-is-the-system-update-readiness-tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Reregister Windows install

  Desktop shortcuts are shortcuts to the Windows Installer which then starts the Office program.

  Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type

  regsvr32 c:\Windows\System32\msi.dll
  regsvr32 c:\Windows\System32\msihnd.dll
  regsvr32 c:\Windows\System32\msimtf.dll
  regsvr32 c:\Windows\System32\msisip.dll
  c:\Windows\System32\Msiexec.exe/reg

  That you re-register Windows Installer.

• Trying to open the files Windows 3.1 with Vista Home Premium 32 bit

  I am trying to open the files of an old computer running Windows 3.1. the files include MS Publisher, MS Works, encyclopedia Compton, & several other w/3.1 compatible programs. Y at - it a program or an update to Vista that can be used to open these files? What I try to open it & save programs on a version of Windows 3.1 & Vista before using on Vista? I can't open files from MS Office that have been made on a computer running Windows 98 or 2000. Any ideas?

  Windows has many built-in features to make it as compatible as possible with older versions, but Windows 3.1 is really a little old! You can try to use Compatibility Mode, but it goes only up to what Windows 95.

  To run an older program in Ccompatability Mode (as if your PC was using an older operating system):

  1. right click on the program and select 'properties '.

  2. go in the 'Compatibility' tab at the top.

  3. check the first check box and to set up the 'Windows 95 operating system "(which is as old as that).

  4. check all other settings for maximum compatibility (depending on the program that you try to use, some may not be necessary, but you should try each of them to be sure).

  5. click "OK" and try to run the program.

  Note: If you want to try to do this at a program Office (and other Windows programs), this may not work. Please ask for more help with this.

  Your files, you need to just find a compatible program to open with. Please tell us the types of files for more help with this.

  Rifdhan

  If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.

• Code of Windows Mail error 0x800CCC0F, Vista Home Premium (32)

  sending a co. from their site, I get the error above in this popup: ' error: your server unexpectedly terminated the connection.» Possible causes include server problems, network problems, inactivity. Topic: How to manage a filing error, account: incoming.verizon.net, Protocol: SMTP, port: 25, secure) SSL): no, error number: 0x800CCC0F.

  Verizon in-home agent appears and wants to do a repair of mail; goig by movements, it is said of l ' network connection successful. PC is connected to the network "from there, it goes in circles. What should I do to fix this? Thank you

  Hi me again,.

  You may need to change the settings of your incoming and outgoing settings.

  Open your e-mail program > tools > accounts > your bizmail account > properties > servers, under outgoing mail server, check "this server requires authentication" > apply > advanced, under outgoing (SMTP) mail change to 465 not 25. Put a check mark on "this server requires a secure connection (SSL)" > under incoming (POP3) mail, change it to 995 no 110. Put a check mark on "this server requires a secure connection (SSL)" > OK

  I would like to know the result of this step.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Is it possible to update the version of paint which comes with vista home premium to the version of paint that comes with Windows 7?

  Greeting cards

  Hello

  Is it possible to update the version of paint which comes with vista home premium to the version of paint that comes with Windows 7?

  Hi, the paint that comes with Windows Vista is designed by default design. See the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-paint

  It will be useful.

• I have a new desktop computer HP with Vista Home Premium 64-bit, with 8 GB RAM and when I try to start Zoo Tycoon 2, he won't play, said that I have no memory system.

  I have a new desktop computer HP with Vista Home Premium 64 - bit, with 8 GB of RAM, and when I try to run Zoo Tycoon 2, I get the following error message:

  You need at least 256 MB of system memory to run Zoo Tycoon 2. (0Mo detected)

  Y at - it a patch? I have read many "Workaround" and none of them work. I tried to run in Windows XP compatibility mode and it didn't work.

  Hey tprefling,
   
  Thanks for posting in the Microsoft answers site!
   
  Right-click on the zt.exe file and choose "Run as Administrator" to launch the program.
   
  See if you are able to play the game.

  If this does not work, turn your computer to clean the start State and see if the fgame plays very well.
  
  To put your computer in a clean boot, follow these steps:
   
  Note: If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  1. sign the computer by using an account with administrator rights.
   
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
   
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  5. click OK and then click on restart.
   
  For more information about the clean boot, see the link below:
  http://support.Microsoft.com/kb/929135
   
  In addition, change the size of virtual memory and see that helps. For more information, see:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  For more details on the Zoo Tycon game, consult the following link:
  http://forums.zootycoon.com/forums/default.aspx
   
  I hope this helps!
  Gokul T - Microsoft Support

• DVD drive does not work in Vista Home Premium

  This is a fairly new computer with Vista Home Premium and the DVD player has never worked and HP the manufacturer can't help me.  It seems that something is missing as a decoder I thought to be a part of Vista

  Hi ck111000,

  Thank you for using Vista answers Forum.

  Fact the show drive upward in the 'Computer' window (start > computer)?
  Are you an error you may post in this forum?

  Here is an article that your problem:

  "Your CD or DVD drive is missing or is not recognized by Windows or other programs"

  http://support.Microsoft.com/default.aspx/KB/314060

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 0x8007001b with Vista Home Premium Center backup and restore backup failure

  I have my Toshiba Satellite M205-S7452 with Vista Home Premium for about 8 months, and November 2007, backup windows, and restore program worked flawlessly. I was able to back up my music, photos and documents to a DVD on a regular basis. But then I started having an error halfway back up that says "drive cannot find the sector requested" with the 0x8007001b error code. It seems that the backup works partially - there are files on the DVD player but I don't know if it ends or not. I tried to do some research on Google and it seems that there is other people affected by this error, but I could not find suggested patches.

  Hi jennielah,

  Please use the Forum of the community for Vista.

  If it has started, use the system restore back to a point before you start. See below for instructions.

  If you can do that I have a work around you. Your specific error seems to relate to update failures, not only the Windows updates but the various failures of update.

  The job is to save it to your hard drive and copy the files on the DVD after the fact.

  I hope this helps.

  Please let us know if we can do something else.

  The System Restore tool

  Other troubleshooting methods, such as using the System File Checker tool, cannot solve the problem. If they do not resolve the problem, and the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time.

  The tool using System Restore may not necessarily help you determine the problem. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start , type system restore in the Search box, and then click System Restore in the programs list.

  If you are prompted for an administrator password or a confirmation, type your password or click continue .

  1. In the System Restore dialog box, click choose a different restore point , and then click Next .

  2. In the list of restore points, click a restore point created before you started having the problem, and then click Next .

  3. Click Finish .

     The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Here is a link to the system restore, if you would like more information

  http://support.Microsoft.com/kb/936212/

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• comatibility professional version 5 Visio with vista home premium

  I have a Toshiba satellite lapto, that came with vista home premium. I installed visio 5 vesrson profession. But id does not run. I get a message saying that the problem of compatibility. What is happenning?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If a program is particularly important to you, there is this way of trying

  but it's expensive, because you must have a previous operating system license to install

  This method also works in vista Home premium, BUT is not supported by microsoft

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en

• 64 bit sytem with vista home premium which has been randomly locking up and freezing. The error is event 6008.

  I have an ACER aspire x 3200 64 bit sytem with vista home premium which has been randomly locking up and freezing. The only mistakes were event 6008 with a description of the stop system prior to (time) on (date) was not planned.
  When these errors originally occurred, I returned the system to acer and they installed a new hard drive. After updating the vista system blockages continue 30 times over a period of 3 months. Acer sent me a new disk image on 3 disks that I have installed and updated on 11 October. There is no blocking until the 10/27, 10/28, and for the 3rd time today.
  The closed unexpected gives a blue screen if I use the locking system to the top. I have to hold the power to restart when the system crashes.
  Can someone help me solve this problem?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  But I guess it's too late for this for so long that there are probably no so old restore points.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer on the stop (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.  From what I understand, there is none of the events (which surprises me because a freeze should certainly generate an error event).

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work (but you NEED a disc).  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• I bought a laptop HP of Costco comes with Vista Home Premium but now I have Validation Code 50. Invalid license.

  Problem with Vista Home Premium Validation

  I bought a laptop HP of Costco comes with Vista Home Premium but now I
  Validation code 50.  Invalid license.

  Validation of Windows through web just hangs.  The key of product or paper plate
  at the base of the laptop is worn out and not readable. I don't want to reformat my drive
  or reinstall my software applications.  What is the easiest solution?  The cheapest?

  There must be a mistake that is not my fault.  Is it possible to validate my particular
  laptop if I provided the results of you and MGA diagnostics validate on your side?

  Hello

  I suggest you contact HP support for assistance.

  http://WWW8.HP.com/us/en/support-drivers.html

• Cannot restore a Pavilion from HP with Vista Home Premium a1520e

  Try to restore an HP Pavilion a1520e with Vista Home Premium using the recovery disks that came with it. Cooldown increased to 99%, then stops with a message "Error 002" ridiculous. Tried the 2nd HDD, reset the BIOS, 2nd set of disks, H/p unable to fix without sending any box and pay more than it is worth. I have all receipts and simply want a legitimate o/s that I can restore.

  Hello

  The problem is not with Windows, it's a hardware error OR you do not have the right Vista HP OEM
  installation media.

  1. check that the disks you have are correct for this model of CV. HP can sell you cheap the
  installation media real cheap since you already own windows.

  2. Remove ALL power and reinstall all the memory cards and cables (at both ends, where this is possible)-in fact
  delete and replace - do not just tight. Clean the dust bunnies and make sure that the vents are clear.

  By chance the need to re - install caused by malware?

  Hope this helps and happy holidays.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• PS/2 mouse stops working on Vista home Premium.

  OK, so I bought a computer, an HP with Vista Home Premium, and (despite all the horror stories, I got friends who use Vista) it worked like a charm. Things were a lot until one evening when my mouse (a three buttons not optical with scroll) has stopped working. It was as if he was not yet connected. I rebooted the computer and the mouse worked fine for a minute or two, then it dies again. I tried to check my computer to find errors and he found, and I have never recived any other error that the fact that I have automatic updates turned off, because I'm on the internet by satellite and I am limited to a certain amount of bandwidth. But back to my problem: I tried a USB mouse and it worked, but it made me even more problems. You see, I have set up wireless network, and I use a wireless USB adapter. However, when I started using the USB mouse, it has messed up my network connection. The computer wouldn't connect to the network, even if I wasgiving it the password correct and everything. I tried another card, and same problem, it always says that the password is wrong, and it would not attempt to open a session on the network, comes immediately coming with the error message. Well, after some time of dinking autour with her, I did finally find the mouse by lightning to work. However, now it is down again. I'm sick and tired of having to borrow the mouse USB of my friend, WTF I do? And please don't tell me to buy something, because I'm here to solve a problem, for not giving Microsoft (or someone else) more of my hard earned money.

  Hi Roadkill1992,

  Thank you for your message.

  You may want to refrain from downloading pirated software.

  Any number of bad things can happen to this activity.

  If it does not work on other computers, but not yours, I think you're right about the driver.

  You can also try a different PS/2 mouse into this port on your computer to see if it is a failure.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.