Windows ME freezes on startup with WEAK 32. dll

Similar Questions

• S20 freezes on startup with installed PCIe card

  Today I made a new S20 (4105 - 94G) Win 7 x 64 BIOS: 60KT31AUS

  I installed the Quadro FX 580 without problem.

  When I tried to install a Firewire 800 PCIe 1.1 card x 1 system freezes during startup, with the ThinkStation screen with the Intel logo visible. No error message, no beeps. I waited for several minutes. This happens in all three PCIe free slots (x 1, x 4, x 16).

  The card in a Sunix FWB3414G (LSI chip).

  I would like to know 1) if any of you have this card work in an S20, 2) suggestions of what to try next.

  Thank you very much in advance for any help or advice.

  Pedro.

  
  

• Windows 7 freeze after startup UEFI due to SSD

  It's a gel when installing 64-bit Windows 7 loading disk.sys during the UEFI boot.

  According to assistance online Intel (https://communities.intel.com/message/206067):
  + "Windows 7 Setup has a problem of detection of Toshiba SSD +.

  * ATA THNSNH25 SCSI Disk Device (238 GB) TOSHIBA hard drive *.

  Is there something to do which would make the installer of Windows 7 loader to work with the SSD drive?

  I read the discussion on the page of community from Intel.
  Looks like you already tried all possible solutions to install Win 7.
  Looks like that Win 8 can be installed correctly, but only Win 7 isn't possible.
  Not very well why this isn't possible, but his problems of SSD drive, you should try another SSD disk.
  Maybe it's a compatibility problem between the controller and a SSD drive.

• Windows 7 freezes at startup

  I just installed windows 7 a few weeks ago, and now when I start the computer it gets at the prompt "starting windows" or page and there it is. I tried to restart and it comes up with repair system that I ran and even system restore and it still sometimes freezes. Any ideas what's wrong with windows 7. I have installed new software and I have virus and spyware. When it freezes it always shows the logo and message of departure

  Hello

  You can try some of them in Mode safe - tap F8 repeatedly that you start.

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs.
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 - free system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  An installation disc is possible also to use for repair. Of course you would
  Use your own COST (product key).

  How to: What are my options for Windows 7 reinstall media?
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

  Welcome to the recovery of Microsoft software
  http://www.Microsoft.com/en-us/software-recovery

  See MVP Andre Da Costa message in this thread.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-can-i-download-gatewaywindows7recovery-disc/3c0ecd74-CFC1-4188-89c7-a6bbe8113ee1

  =====================================

  If necessary:

  What to do if Windows does not successfully start (applies to Windows 7 as well)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Vista freezes at startup, with the logo of "Microsoft Corporation".

  Hi all

  For some reason any when I turn on my computer Vista is stuck at the 'Microsoft Corporation' logo screen, with the little green loading bar and it will not move beyond this point. I must then hold down the off button to turn it off and then use the repair system (or is it restart?... one that will automatically appear anyway...) I have to use the system restore too) etc. to make it work. The problem is that this happens about half the time I turn the computer, so is a slow process that I had to endure.
  Someone at - it ideas? I hope this means does ' t that I format the hard drive and reinstall Vista, that is not something I know how to do...
  Other points to note are that it seems to be related to Antivirus programs... I had Norton, and sometimes when the above problem happened, once connected, Norton would say that my computer has remained and a whole bunch of things were turned off... I could not turn them back on. I gave Norton a while ago, and it seemed to fix it for a while. However occasionally I have AVG and a similar problem occurs now (although very rarely... normally, the computer hangs just at startup as shown above). I also noticed that Startups will take much longer now, and sometimes if the computer is past the screen of Microsoft Corporation, it will be just a black screen for about 20 seconds and sometimes comes up with a message referring to the registry keys (I don't remember the exact message). He eventually starts however.
  I also found the similar question: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/thread/af488955-1080-4329-a5a0-774916c7341e
  I used the File Checker system as stated in the answer to the question above, but the result was "no breach of integrity", so I guess that's not that.
  Thank you, and any help would be appreciated,
  kcodon

  Hi kcodon,

  Thank you for using the Microsoft Windows Vista Forums.

  You must remove the external devices connected to the computer to check the issue.

  Try to start the computer in safe mode.

  Follow the instructions below to start the computer in safe mode.

  1 turn on the computer or restart the computer

  2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear. If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.

  3. check that the safe mode option is selected (the High option of the page)

  4. press ENTER. The computer then begins to start in safe mode.

  If this does not work, let us start the computer in a clean boot state to determine.

  To perform the clean boot procedure, follow the instructions in the link below.

  http://support.Microsoft.com/kb/929135

  Perform the clean boot procedure to find the service that is causing the problem.

  If the problem persists, you need to do the upgrade inplace to solve your problem.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• installation of Windows 7 freezes on startup screen

  I am trying to install windows 7 pro 64 on a new Board from biostar itx a68n-5000. He gets in regard to starting windows with the colored balls and freezes.  BIOS sees readers, Ive tried affecting SATA AHCI, IDE, IDE's Legacy and no help. I also tried loading from a USB key which is bootable and still nothing, Ive built a few computers and have never had this problem. The Board of Directors is set to SATA 3 and I use 1 SATA disks, I thought everything was backward compatible.  Any help please

  installing windows 7 from windows with colored balls and freezes.

  0- Turm off your PC, delete all devices USB + mouse, unplug the cord, remove Bios battery, press and hold the button for 1 min while battery disconnected and the bios is out, release and sale battery and plug it. try to install again (do not connect any USB)

  0- update your BIOS

  or

  1- change the configuration of SATA in BIOS on 'compatible'.

  or

  2- disconnect any drive HARD or SSD, USB cables

  or

  3- Check your bios, if there is a Secure boot: ON, then turn off the POWER

  or

  4s ' there is "lunch CSM: in your bios, enable it."

  or

  5-disable the 'support of diskette drive' in the Bios.

  or

  6- turn on SATA AHCI in the Bios and enable the SATA Native mode.

  or

  7- use Rufusand install windows USB

  or

  8- get out your SATA, put it in another PC and install windows, then replace your first computer and install the drivers.

• Windows 8 freezes at startup.

  Hello

  I have a new problem with my Dell laptop. At the start of what Windows does not start successfully, I see the pot of time and after 5 minutes or if I get a dialog box saying;

  Title: Microsoft Windows

  Text in box: the application is not responding. The program can meet again if you wait.

  You want to terminate the process

  Two choices: complete the process & Cancel

  clicking on cancel and after 30 seconds I get the same box again

  By clicking on complete the process and I get a blue screen and then my desktop at the top of the page shows with no icons and placing the cursor on the bottom bar I see the pot of time.

  Result: nothing happens.

  Any advise?

  Thank you all.

  Hello

  Check with Dell Support, their drivers and documentation online and ask in their forums

  on known problems.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Dell PC Diagnostics
  http://www.Dell.com/support/Diagnostics/us/en/19/

  ==============================

  These can help - try first "automatic repair":

  How to run a "automatic" repair to solve problems starting Windows 8/8.1
  http://www.eightforums.com/tutorials/2843-automatic-repair-run-Windows-8-a.html

  How to start on the "System Recovery Options" in Windows 8/8.1
  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  How to start Windows 8/8.1 in Mode safe
  http://www.eightforums.com/tutorials/2757-safe-mode-start-Windows-8-a.html

  Boot to the tip "Startup parameters" in Windows 8/8.1
  http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  ----------

  Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC of Windows 8/8.1
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8/8.1
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8/8.1
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8/8.1
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 7.15 Skype on Windows Vista freezes on startup

  I've updated to Skype latest version 7.14 and 7.15 on my Windows Vista and after this update, Skype starts ever upward. Even if he starts, he ends up Skype closes with a problem. Completely uninstalled and resinstalled, checked the updates of windows, then all the FAQ, but not luck.

  

  After a session with an agent of Skype screen sharing and proving that this problem only occurs with the recent version, he was able to recognize this bug with 7.14 + version. I have download the old version and it started to work very well. Today, when I've updated my Skype to 7.17.0.105 version on Windows Vista, looks like Microsoft/Skype has listened to the bug report and have it fixed! Hooray! Thank you, dear friends. In addition, it seems they have fixed another bug where we sign out of Skype, it took too much time to finally get back to the login screen and has hosted the Windows machine during this process. Double Kudos to the team for fixing this loooooooooooooooooooooong pending correction of problem!

• M1522nf freezes at startup with &gt; &gt; &gt; &gt; &gt;

  Hello

  for a week, my m1522nf printer does not work.

  When I start it up, I'm getting >

  and then he stuck.

  Anyone know what I can do?

  Thank you.

  It is always a question of trainer. One thing you can try is to remove the formatter (located on the left side) and remove the memory chips or the black ribbon of the slot memory. Now place the trainer in a casserole in the oven with the chips upward and the jury supported so that the bottom does not touch the pan. Now, Preheat a good oven at 350F (177 C) and when the oven is ready, place the pan with the jury in the oven and keep in the oven for 8 minutes exactly. Remove the Pan and let cool for 15 minutes. Replace the card in the printer, plug in all connections making sure that all are connected correctly. Read the the modem cable that attaches between the modem and the trainer. Turn on the printer and I hope that it will go to where you will be asked for a long time date and this happens most of the time when you cook or just just ready... This isn't a joke. It runs on 95% of the time.

• Windows Explorer is probably about with MSONSEXT. DLL

  Windows Explorer has not worked properly for a while. Recently, however I could not load the system. I have a black screen and white slider mobile and I couldn't do anything. System loaded after 6 or more attempts. In my event log, I found this application error.

  1000
  The failing application name: explorer.exe, version: 6.1.7601.17567, time stamp: 0x4d6727a7
  Name of the failed module: MSONSEXT. DLL, version: 11.0.6715.60, time stamp: 0 x 43306199
  Exception code: 0xc0000005
  Offset: 0 x 00053555
  ID of the process failed: 0x1c8
  Start time of application vulnerabilities: 0x01ce879ac12d3f59
  The failing application path: C:\windows\Explorer.EXE
  Path of the failing module: C:\PROGRA~1\COMMON~1\MICROS~1\WEBFOL~1\MSONSEXT. DLL
  ID: 8765efb9-f38e-11e2-ab1f-002622cb2c88
  I used Sfc scannow, poorly detected nothing. Also scanned for malware (there are some issues, but I got rid of them) still windows Explorer crashed and is very slow work.
  No idea how to fix? I would be grateful for any help.

  Wojciech, salvation

   

  Thanks for posting your question in the Microsoft Community.

   

  This problem could be caused due to video card problem.

  1. have you checked the question in Mode safe?

  2. What is the brand and model of the computer?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  I suggest you to disconnect all the external devices connected to your computer except keyboard and mouse and check.

  Follow the steps from the link:

  Why my screen is black when I start Windows 7? :

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

   

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  If you need further assistance on this topic, let know us and we will be happy to help you.

• Service Acquisition of Image Windows (WIA) suspended at startup. Responding server {81ED811 A1F4E726-8CF1 - 11 d 1-BF92-00600} is not registered with DCOM within the required time.

  Since early April 2010, my computer started to shut down immediately after starting, or at a time later. A lot of system errors and other events have been reported in the error log, which much of this: "the MMTP service failed to start due to the error - the following system could not find the specified file - after 31/2 months, I abandoned this fixation and F11 to restart or reload the system to the original system; Have updated and 135 items updated, installed IE8, WinXP Pro + SP3 and finally my HP Laser Jet printer 5 p. Try to strt the computer a few hours later, but it stops immediately after, within 2-3 seconds; Repeat this several times. Unplugged the printer, the computer began; The error showd 2 journal items, repeated several times. i.e.

  (1) the service Acquisition of Image Windows (WIA) suspended at startup.                                                  (2) the server {81ED811 A1F4E726-8CF1 - 11 D 1-BF92-00600} is not registered with DCOM ala required timeout.  Can someone help please? I have to go into msconfig and other? I'm tired & patience thereby and the help that I received from the MS Tech Support.

  Help, please! Thank you! HeinrichDS

  Thanks "nass 1" for your support, I will follow Palouk recommendations to update the drivers for the HP product and hope it will be OK.

  I appreciate your help, HeinrichDS

  HeinrichDS

• migrate from Windows 10 failure error oxc ox400d 1900 failed in the second phase of startup with the error during operation of data on my windows desktop 7

  Windows 10 has failed 75% error oxc 1900-ox 400 d has failed in the second phase of startup with the error during the operation of the Migrate_data on my windows desktop 7 using media creation tool. Help please.

  Turn off the computer.

  Wait 10 minutes.

  Start the computer.

  The installation program automatically restores your previous version of Windows 10 or an earlier version of Windows.

  Launch the prompt with administrator privileges.

  Press the Windows key + X

  Click prompt (Admin)

  Type the following command:

  Rundll32.exe pnpclean.dll, RunDLL_PnpClean /DRIVERS /MAXCLEAN

  Press enter on your keyboard

  Exit command prompt

  Restart

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• SQLite3-wal-point control cannot be in SQlite3.dll library message appears at startup with windows 7 starter 32-bit system.

  SQLite3-wal-point control cannot be in SQlite3.dll library message appears at startup with windows 7 starter 32-bit system.

  Don't worry about this - I fixed it by following the steps below...

  Thanks anyway! :-)

  1. Temporarily close the anti-virus software and firewall
  2. Open the control panel configuration, programs and features or Add (and remove programs) and go to the section uninstalling
  3. Remove all Apple products in this order - iTunes, Quicktime, Apple Software Update, Apple Mobile Device Support, Hello, Apple Application Support.  You don't need to remove Safari
  4. Restart the computer
  5. Go to Apple.com and download the latest version of iTunes
  6. Re-install

• I need help with my computer Windows 7 freezing. How can I stop this?

  This just happened to me because my computer has been built up and tested in the last month. I was in the middle of work on an assignment for the class online and just froze. I couldn't use the mouse or keys and was forced to hit the reset button on the front of my computer. I use Windows 7 Ultimate with all updates. I have the Intel Core i5 quad core processor and PCI Express card Asus Geforce GTX 550Ti 2.0 and 4 GB of memory hardware. It is the copy of the event viewer. I will list all the codes that concern as well. This is the entire code format: (this has happened before, so I need to know why it happened and how I fix so it does not happen.) Thank you very much for your help!  Ernie Mink

  -

  -

   

   41

   2

   1

   63

   0

   0 x 8000000000000002

   

   21448

   

   

   System

   ErnieJMink-PC

   

   

  -

   0

   0 x 0

   0 x 0

   0 x 0

   0 x 0

   fake

   0

   

   

  Hi Ernie,.

  You get a Blue Screen of Death (BSOD) error?

  A 41 event is used to signal that something unexpected has happened that prevent Windows to close properly. This problem may be caused, if some hardware drivers are not updated.

  I suggest for the link and follow the steps in the article based on different scenarios.

  Of core Windows event error ID 41 'the system has rebooted without cleanly close the first' in Windows 8, Windows Server 2012, Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/2028504

  See also:

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Launch Firefox on startup with Windows 10

  How can I make Firefox will automatically start up when I turn on my computer? At the moment it takes forever to start and I would like to go there as soon as I turn on the machine. I use Windows 10. Thanks in advance.

  Hi MontgomeryS, like previous versions of windows win10 has an autostart folder in the startmenu, where you can place shortcuts to programs - those who will be launched as soon as you connect to your account.

  Press windows + R and open %appdata%\Microsoft\Windows\Start Menu\Programs\Startup - then open the right file. You can then right-click on the icon of firefox on your desktop, copy it and then paste them into the startup folder.