Windows media 10 Player stop playing DVDs during playback

Similar Questions

• Windows Media Center won't play DVD

  Windows Media Center won't play DVD. This program has played these exact DVD in September. These DVDs can be played on other devices. Error message indicates that there is a problem with the decoder, but don't tell me the code of error message. I searched other forums, but it is impossible to find an answer to this problem, except the recommendation of a codec - although I don't know how I "lost" the codec in the month. Microsoft Security Essentials have installed and up to date, if it is not a virus. Have problems in other programs with the recognition of previously readable files. Not sure if it's related, so I'll post in separate... forums but I'll give you a link if you want to. Your help is greatly appreciated. Thank you.

  Hello cowgurlup55,

  In addition to the response of Santosh, please relay if the problem occurs when you play a DVD or a single. Please also relay if the same problem occurs when you try to play the DVD with Windows Media Player.

  In addition, if you have an extra DVD decoder installed, then try to update the DVD decoding software.

  For more information about MPEG - 2 DVD decoders, please visit the link below:

  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  In addition, you can also view the thread below with a similar problem:

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/27d40602-0346-48D9-b9b3-227d836abb15

  I hope this information is useful.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Internet TV in windows media center has stopped playing

  custom internet TV to my windows media center play.there is only a white screen when I try to watch something.

  Where are you located?

  Internet TV is available only in the United States and the United Kingdom.

  If you are located in one of the locations above, then try to re-run the whole upward.

  Open WMC, tasks > settings > General > Windows Media Center Setup > run the Setup again.

  Also, make sure that you have installed the latest version of the flash player.

  http://get.Adobe.com/flashplayer/

• Windows Media will not stop playing

  Windows Vista Home Premium 32 bit IE8

  Windows Media play through the video, then restarts and continues to go in the same loop. At the present time, I opened Windows Media from my office and manually close the video. Worked OK until I went back to IE8. NO, I don't want to go back to IE9. THANKS in advance.

  I was FINALLY able to follow your instrucrtions. Initially, I opened what I thought, it's Windows Media Player from the desktop only to find out that I opened up Windows Media Center instead. So, I opened the drive in the list of program and the repeat off. It works very well. THANX.

• Windows Media Center/player or my Acer arcade deluxe will not play DVDs

  Original title: WINDOWS MEDIA CENTER/PLAYER or MY ACER ARCADE DELUXE WILL NOT PLAY DVD CANT GET IT to PLAY anything for NOW

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  you're not giving us enough information. When did it stop working? If it worked
  previously, I would recommend first trying to run Windows Media Player AND Windows
  Media Center, and then again. Control Panel, programs and features, tour
  Windows feature turn on or off. Uncheck the two programs, restart. Go back and turn them
  both on reboot. This solve your problem? Otherwise, you should try a system
  Restore to a point where everything worked normally, maybe early August? By
  wait, you have only made it more difficult to triage and solve your problem.
   
  On kills, 21 Sep 2010 21:47:03 + 0000, LEEGYPO wrote:
   
  > Sorry took so long to reply, but still in the same boat so im using windows 7 when I bought the computer (acer), it came with windows media player and acer arcade deluxw (what music parts but usually rip songs for me) that now only acer arcade works but media player that is customary there, she moves for a fraction of a second , but usually begin!
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello
  Try this:
  http://support.Microsoft.com/kb/306318
  b Eddie

• I have upgraded to Windows XP Professional and now Windows XP Media Center won't play DVD - component missing.

  Now I have Windows XP Professional after the upgrade to Windows XP Media Center Edition Home 2005. Now my Media Center won't play DVDs and I keep getting the error message "Missing Component". I tried to reinstll cumulative update 2 for Windows XP Media Center 2005 that has worked for me the last time I had this problem, but now I get the Error Message "you must have Windows XP Media Center 2005 installed to get this download and it shows already on my computer as installed components. When I reinstalled it 3 years ago he corrected the problem of DVD. Help, please

  Thank you for your help. Here are the answers your request:

  "Windows XP Media Center version 5.1 Edition - this shows when I"run"- winver - ok.
  Complete error message: "Missing Component - required component Media Center is.
  missing. Please contact the manufacturer of your hardware.
  KB article: WindowsXPMediaCenter2005-KB900325 - usa .exe
  The windows of origin is always on display as shown above, but I received a free upgrade to Windows XP Professional CD and installed on my computer. And under 'Information system', it shows as - Microsoft Windows XP Professional 5.1.2600 Service Pack 3.

  This problem started about 10 days when I used the CD of XP Professional to correct a problem. My computer is a Dell Dimension 5100 and I have two CDs that were sent to me - Dell - Microsoft Windows XP Professional SP 3 and Microsoft Windows XP Media Center Version 2005 with update Rollup 2.

  Thanks again and I ran the "fix it" you suggested but it have no problem found to fix. Every thing works fine on my system, but Media Center won't play DVD. It will play CDs and videos on my system.

  The initial problem was that I could not download the Blackberry Desktop Software - updates needed. The computer came with Windows XP Media Center Edition Home and I use Internet Explorer 8 as my default browser. I also use Mozilla Firefox as my backup browser.

  Please stick to your thread to avoid confusion of origin: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/i-have-upgraded-to-windows-xp-professional-and-now/f5245962-e9b4-4415-8aff-bc1d972f8120

  Note that I asked you to MOVE your original thread on the forum of material WinXP, not start a new thread.

  Also note that you don't have NO Windows XP Media Center Edition, installed now if you upgraded to Windows XP Professional.

  PS: If "winver" still says Windows XP Media Center Édition, did you not correctly upgraded & something is not. Better contact the Dell Support on this issue (if they'll still talk to you).

• CD burned in windows Media Center does not play in car cd player

  The cd I burned using windows media center will not play in my car. Says "bad CD". But he does not play in my cd player. I don't understand??

  Thanks for your comments. Unfortunately, I had already done what you suggested before asking for help. It darn anyway :-(  But thanks again

  ==================================
  Just to make sure there is a CD... check Audio (music) the
  Directory by going to start / computer or click
  the drive the drive letter. File extensions
  see you on the CD should be .cda

  Could be a total waste of time, but I think I'll try
  burn an Audio CD (music) with the following free software
  just to see if it might work.

  CDBurnerXP
  http://www.CDBurnerXP.se/
  (works on XP, Vista, 7)

  CDBurnerXP to make Audio disc
  http://CDBurnerXP.se/help/audio/compileaudio

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Media Center cannot detect the error DVD Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD into the drive

  Original title: why Windows Media Center does not detect my DVD?

  I built my computer motherboard ASUS P658D, Intel i7 processor clocked at 2.6 gHz, 12 GB RAM, 750W Corsair PWR. power, Windows 7 Home Premium 64 - bit & ie9. When I put or the other two DVDs in one of two DVD players, Windows Media Center appears and when I click on "Play DVD" Media Center give me a window that says:

  "Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD in the drive." Two DVDs, I've tried are educational for DVD

  my Nikon D300 Digital camera and a family video DVD or both these very well play in a bed of same computer running Windows 7 Professional 64-bit, & ie8.

  I tried Microsoft Fixit, no help. I tried to send Microsoft Support, and I got NO HELP. I did not bring any changes, and installed any program, just

  scoured the internet. A DVD player is a Sony Optarc with Microsoft Driver, the other is ASUS. I also tried to use Windows Media Player but nothing

  rises or it returns me to Windows Media Center and it does not detect to play either of my DVD. How can I get help here, or from Microsoft? Thank you.

  No, there is no yellow warning in Device Manager and the device manager says that two DVD players work properly. Mr. Fix it's

  automated download from microsoft that is supposed to automatically fix some problems, but he provided no help here. I think it is more likely

  that there is a problem with Windows Media Center or Windows 7 Pro 64 bit and either of my two new Sony DVD drives

  and ASUS.

  I thought my way in a solution. My thought was: Device Manager indicates DVD players work properly and both are new and we're Sony, and the other ASUS so I think only an unlikely problem with readers. The problem is with Windows Media Center "do DETECTED is not the DVD. So there must be a problem with Windows Media Center. I thought that I might need to reinstall Windows 7... then I thought that maybe if I just reinstall Windows Media that will work. He did. My problem was:

  Start > Panel > programs and features > features on or off Windows activate > then uncheck the box for multimedia functions > restart the computer > and then re-check the box to restore the multimedia features > now both discs play both DVDs, I tried. Both disks are operating normally. Reinstall the characteristics of media Windows 7 resolved the problem. Thanks to all who offered solutions.

• Error: "Windows Media Center has stopped working. Windows is checking for a solution. "when tried to open it after installing the KB983590 update

  Original title: WMC no longer works after update of August 10

  Windows Media Center has stopped working after installation of my Windows 7 Professional pc all 11 updates gave me on August 11, 2010. I used system restore to the day before the updates, and install them individually. The first 9 no trouble with WMC. But the IE8 KB982664 for Windows 7 compatibility view list caused my action center to report that I needed to check the undeclared solutions to problems. WMC would still start. But after installing KB983590 .NET framework 3.5.1 for Windows 7 x 86, WMC has stopped working.

  After you uninstall update 2 above WMC would still not start.

  After using the system again restore forward updates, I installed the other 9 updated with, so far, no problem with WMC.

  New installation of Windows 7 Pro.

  V.1.0.1963.0 MSE completely up to date. [have not installed the latest beta version due to this problem]

  Former pilot Mig15. Now using Windows 7 Professional and Project Professional 2010 Beta.

  Hi Davy-D,

  Step 1: Perform the upgrade on the spot
  a. close all applications, insert the DVD into the DVD drive of the computer.
  b. in the settings window, click install now.
  c. click go online to get the latest updates for installation (recommended).
  d. type the CD key if you are prompted to do so.
  e. click Yes to accept the Microsoft software license agreement.
  f. on the type of installation do you want? screen, click upgrade.
  g. when the installation is complete, restart your computer and check the difference.

  See Method 2 of this article: http://support.microsoft.com/kb/958044/en-us

  Very Important: Run a repair installation will not damage files and applications that are currently installed on your computer. However we recommend that you back up data, performing the steps incorrectly can delete data.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Media Center will not play DVD'sIt tells me to create an association in the set Associations Panel, how can I do this?

  I can't play the DVD on HP my computer smart touch, I get a messgea not saying no association of this program itself an association of Associations of all Control Panel, how can I do this?

  Hi Tom,

  1. What is the format of the file you are trying to play?
  2. you have made no changes to the computer before the broadcast took place?

  I suggest you to set up Windows Media Center as the default device for playback of movies.

  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

• Windows media Microsoft Quickplay sees not dvd disc

  Title: original dvd plays not
  Windows media Microsoft Quickplay sees not dvd disc, running on windows7 home premium service pack 1

  Hello

  1. don't you make changes on the computer before the show?
  2. you receive an error message?

  Method 1:
  Run the fix it and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:
  You can try the steps in knowledge base article and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756

• Whenever I click on recorded TV I get this message "Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  Title: original problems to access TV on Windows Media Center recordings

  My media center has suddenly stopped working for recorded tv.  Whenever I click on recorded TV, I get this message:

  "Windows Media Center has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  All other features of the media center work correctly.

  Any help would be appreciated.

  Hi vater19,

  Remember to make changes?

  Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference

  Open the Setup TV tuner Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

  Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Click recorded TV, it says that "Windows Media Center has stopped working, seeking resolutions... »

  I'm having a problem with Windows Media Center. It starts no problem, but when I click on recorded TV, it says that "Windows Media Center has stopped working, seeking resolutions... "If I click on TV guide there is no problem. I tried a restore, but for some reason any restore function has been disabled.

  (copy - paste from another thread - user has same question):

  
  You has not, coincidentally, happens to record last Friday (I think it is?) episode of human target (what happened to be replaced by a House reruns), did you?
  Reason I ask: it has been a little traffic on to thegreenbutton on the subject these days - and everyone who reported also arrived to try to save human target.  Somehow, the file finished with metadata is corrupted, what makes MC crash when you enter recorded TV (at best, it crashes when you select the program from the list.)
  FIX: Open Explorer and go to C:\users\Public\Recorded TV.  Find and remove "human Target__"(exemple: «La Target_WDIVDT_2010_10_01».) ".
  Start Media Center, and then try again.  Fixed?

  HTH,
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Error message "Windows Media Center has stopped working" what Xbox Live is connected.

  Original title: TRY XBOX LIVE WITH WINDOWS MEDIA CENTER UI

  I have some setting wrong my XBOX Live interface with my computer. I get the message "windows media center has stopped working", immediately after the seizure of the 8-digit code provided by X - box in Windows Media Center. I dropped my firewall, I also allow all programs and open all ports to come through my firewall. What else can I try to remedy? Thanks, Cliff.

  Hey, Cliff,

  1. what operating system is installed on your computer?

  2. Windows Media Center works great if you do not connect Xbox Live?

  Follow the step in the article below and check if it helps.

  While trying to use your Xbox 360 as a Media Center Extender console, you receive the error message: "Media Center has stopped working".

  http://support.Microsoft.com/kb/932343/en-US (Applicable to Windows Vista)

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]