Windows Media Center - audio problem on recorded TV

Similar Questions

• In Windows Media Center, one of my recorded tv programs blocking WMC, when you place the cursor on the title.

  WMC doesn't crash on any other recorded program tv and all the other game of TV very well.

  Is this perhaps a corupt file?  Where can I find this fmanually file so I can remove it?

  Thanks for your attention!

  Hi ClaytonNagle,

  Thank you for writing to Microsoft Communities. Before you start the troubleshooting steps, I need the following information:

  ·         Did you do changes on the computer before the show?

  ·         What version of the operating system is installed on the computer?

  Follow the steps in the article, and check.

  Solve problems with a Windows Media Center Extender device

  Let us know if you need more assistance. We will be happy to help you.

  Thank you.

• Windows media center xbox problem

  I'm running on windows vista 64 bit, but I have a problem when connect my xbox 360 Media Center with my pc, they detect very well, but when they come to connect it disconnects the network of xbox and my pc... Help

  Hi Jonathan Thewlis

  
  Do you get any error messages when you try to connect?

  I suggest you temporarily disable the firewall, and check if the reconfiguration of the configuration solves the problem. If you are able to communicate properly with disabled firewall, then you must configure the firewall properly connect.

   

  Don't forget to enable the firewall after troubleshooting gets completed that your computer will be at risk.

  You can also check the help on the issue links - below

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-setting-up-an-Xbox-360-as-an-Extender-for-Windows-Media-Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-a-Windows-Media-Center-Extender-device

   

  You can also look at the article below and check if the information is useful.

  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/49/p/38589/453405.aspx#453405

   

  I hope this helps.

• Profiles of Netflix in windows media center, causing problems

  It seems the new Netflix profiles posed problems in the version of Windows Media Center of Netflix.

  Launch and selecting a movie/show in the app Netflix Windows Media Center works great.

  However when you play the movie, you are prompted to select a profile, after you select a profile you are presented with a screen saying:

  "Something is not right of the specifications.  Repeat this last step' with two buttons "Lets try again" and "Cancel".

  By selecting "Lets try again" brings up two error dialog boxes

  The first is a "permission denied".

  Followed by an error of "jQuery".

  Also I we a remote control for my video capture card to navigate Windows Media Center and the profile selection screen can be activated with the mouse.

  Hope that this selection screen when developed will be something that I can use the remote control for.

  I have been informed that Netflix has eliminated a patch to work around the problem. The profiles will NOT work inside the WMC, but you should receive is more an error and the original profile should work as before.

  Please confirm

  --
  Barb

  MVP Windows Entertainment and connected home

  My Blog - http://digitalmediaphile.com/

  Connected world Blog Reader Windows 8 App Barb-
  http://apps.Microsoft.com/Windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461C-b1d5-06e54a58d298

  Windows and Surface drive Windows 8 App community
  http://apps.Microsoft.com/Windows/en-us/app/Windows-and-surface-community/0abb150e-D287-47d4-837E-9fa51f485ad7

  Please mark as answer if that answers your question

• installation of WMP11 on windows media center 2002 problem

  I tried to install Windows media player 11 ((WMP11) WMP11) on windows XP media center edition 2002 worm, pass program copy of windows validation and display the following message:

  "Installation cannot continue, one or more of the following problems has occurred during installation...". Operating system not supported, download the Update Rollup 2 for windows XP m dia center 2005 edition, before to install wmp11

  How you try to install WMP 11. Updates or the stand-alone package?

  Download here in clean boot.

  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme

  This could also help.

  http://tipsfor.us/2008/09/06/install-Windows-Media-Player-11-on-XP-without-WGA-headaches/

• Windows 7 "Windows Media Center" in the TV recording settings that represent the quality settings? That is to say: better = 1080 p?

  When RECORDING LIVE TV using Windows 7 "Microsoft Media Center" there are quality parameters. The parameters are "better, better, good or fair.

  On the BEST configuration, I can barely hold 118 min disk 240 min. What are the different settings in ppi? That is to say: better = 1080 p?
  http://blogs.technet.com/b/Security/Archive/2007/06/05/building-my-Windows-Vista-Media-Center-VMC-part-2-the-tuner.aspx
  has some info. the parameters on compression, no resolution.
   
  you will not get any high definition without a cable card and broadcast more 720.
   
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Windows Media Center TV Live TV & Recorded freezes & displays a blue screen.

  original title: WMC (WindowsMediaCenter) LiveTV & RecordedTVfreezes & GoesToBlueScreen

  How can this problem be simply resolved?

  It is perhaps an average 5 - 10 times a day.
  And sometimes a barrier cursor while typing.
  There are also defective TV recordings and routed.
  These records could be simply due to a reception antenna problem?

  Hello

  1 did you change on your computer?

  2. What is the rendering and the mouse model number?

  3. have you received any blue screen error?

  Method 1:

  I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest update you also the graphics drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: I suggest you to follow the link and check how to fix mistakes BlueScreen (STOP) that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  I also suggest you to follow the link and check.

  A problem of recording TV on your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-recording-TV-on-your-computer

• ZP to Windows Media Center TV problem

  When I watch tv I get the following error message: .net Framework: v1.1.4322? I was watching television on this computer before, but I must have somehow deleted such.

  You need to reinstall: -.

  .NET Framework version 1.1 redistributable package

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26

  The .NET Framework version 1.1 SP1: -.

  http://support.Microsoft.com/kb/885055

• Windows Media Center must be running to record programs I have planned to record?

  TV recording

  Do I need to have Windows Media Center actually run programs Records I have planned to record - for example, a series?

  Close.
  Hibernation will work too - but, as in sleep, it won't work if you don't have no "enable wake timers" set to Yes in your diet Plan.
  I would recommend the sleep, however (never put into hibernation), also some hardware configurations have more problems waking up from Hibernation (sleep wake is, generally speaking, more reliable for a Media Center.)
  OFF, however, is, well, discount - a PC cannot wake goes out.

  As Dominic said, however, MC does not need to be opened (in fact, even no need to have a connected account) - TV recording is managed by a background system service.

  As for tuners in use: If you watch TV (or, rather, Live TV is running), you will be presented with a pop-up message "do you want to change the channel, or cancel the registration?  If nobody is there to hit buttons, it will just change the channel on its own (assuming that no one is there) and run the scheduled recording.

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Cannot play movies/recorded shows in Windows Media Center on Windows 7

  Three years ago I bought a Sony laptop with Vista and an external tuner ATI so that with a CableCARD, I could use Windows Media Center to record shows/movies. I recently bought a new PC with Windows 7 and found that the Windows 7 PC cannot read the 500 films/shows that have been saved and the new Windows 7 recorded shows can be played by the Vista laptop. Is any way to convert or run natively these shows that have been saved under the WMC?

  Ralph Greenlee

  E-mail address is removed from the privacy *.

  Hi RalphGreenlee,

  Thanks for posting your query in Microsoft Community.

  If I understand correctly, you are unable to play back movies recorded in windows media center.

  Looks like the file cannot not supported by Media Center or you need a codec to right.
  What type of video file format?
  Also check the videos if there are other formats to the choice other than the one you have now.

  Method 1:
  Step 1:
  Indicate the file types supported by Windows Media Center:
  Types of files supported by Windows Media Center:
  http://Windows.Microsoft.com/en-us/Windows7/file-types-supported-by-Windows-Media-Center
  Step 2:
  Try using a good set of codecs and then try to burn video files.
  Codecs: Frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See also:

  See pictures and videos in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows7/view-pictures-and-videos-in-Windows-Media-Center

  Add media files to Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows7/add-media-files-to-Windows-Media-Center

  This management recorded TV in Windows Media Center: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Managing-recorded-TV-shows-in-Windows-Media-Center-frequently-asked-questions

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• Choppy video playback in Windows Media Center (Windows 7) WTV

  I recently experienced a video playback jerky with windows media center.  Sometimes the recorded TV (WTV format) play very well for about 2-3 minutes until the video playback is very jerky (probably about 5 to 10 frames per second instead of the usual 30-60 fps).  The audio is not again normally.  Windows Movie maker also plays choppy video (Windows Media Player seems to work very well).  The main menu of Windows Media Center, itself becomes generally restless slow when I'm scrolling autour options, even when there is no video game in the background.  Video streaming on the Internet and DVD seems to play fine on Windows Media Center, and I can even stream HD video without problem.  I also know that this isn't a problem receiving the TV tuner since I test with the video recorded previously.  I bought my computer in June 2009 with Windows Vista and upgrade to Windows 7 a few months later.  Everything worked perfectly well until recently.

  I tried to update my video card drivers, reallocation of Windows Media Center to a task of "high priority" to improve performance, the RAM Cache to improve the performance, my graphics card setting to low quality setting to have superior performance to compensation.  I even tried to reinstall Windows Media Center, reinstall Windows Media Player and the restoration of my entire computer to a State a few months in the past where the problem was not intervened.  The memory usage seems OK too (I have 6 GB).  Basically, I don't think that the issue is performance related.  I'm guessing that there is some little conflict, pilot program, codec, etc., which is originally the video playback to go bad after a few minutes.  Any thoughts?

  Here is some info on my Page "system information":

  Microsoft Windows 7 Home Premium
  HP-Pavilion
  System Type x 64-based PC
  Processor Intel (r) Core (TM) 2 CPU Quad Q8300 @ 2.50 GHz, 2500 Mhz, 4 Lossnay, 4 logical processors
  BIOS Version/Date American Megatrends Inc. 5.43, 10/09/2009
  SMBIOS 2.5 version
  Physical memory (RAM) installed 6,00 GB
  6,00 GB total physical memory
  4.33 GB available physical memory
  12.0 GB total virtual memory
  9.56 GB available virtual memory
  Page file space 6,00 GB

  NVIDIA GeForce 9500 GS
  Adapter RAM 512.00 MB (536,870,912 bytes)
  Installed Drivers nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um
  8.17.12.6099 driver version
  File INF oem80.inf (section Section004)
  32 bits/Pixel

  For what it's worth, I was faced with the problem of stuttering for always (continuously from a WHS for a HP Media Center Extender) and had tried all of the recommended patches (updates driver, network card settings tweaking, etc..)  Nothing helps.  Last week my router died (Netgear WNDR3700, who was the State of the art when I bought it a year ago).  I replaced it with an old but unboxed Linksys WRT320N and stuttering all my problems disappeared.

• Qosmio G40 - 10F: how to set up double Tv Tuner in Windows Media Center

  Hello

  I recently bought a 10th G40 and I was wondering how to set up dual Tv Tuner in Windows media Center to watch and record the Tv at the same time.
  I tried to download the new driver from the Toshiba download page, but it seems to make no difference that Media Center does not give me the ability to configure 2 tuners.

  Any help would be grateful

  Michael Bowen

  Hello

  Found this useful Microsoft page:
  http://www.Microsoft.com/Windows/products/windowsvista/footnotes.mspx

  Take a look at the chapter * M *-> on MCE

  You can find this info:
  + Reading and TV recording features require a USB TV tuner or external. Supports up to two TV tuners +.

  So in my opinion, you cannot record TV and watch another channel at the same time using only the internal TV tuner.

• Windows Media Center won't play movies or videos.

  Windows Media Center

  problems began with the shifting of the wmc vedeos vedios. now his habit get worse let me do something hardy

  What type of video file you are trying to play in WMC?

  Supported video files: -.

  http://Windows.Microsoft.com/en-us/Windows7/file-types-supported-by-Windows-Media-Center

• Just downloaded windows 7 Home premium 64-bit version upgrade for my computer vista laptop, windows Media Center does not have internet tv option.

  When I open windows media center, it shows only "Recorded TV" and "Live TV Setup" under the heading of TV. How can I configure internet TV for windows media center? Y at - it an upgrade or something that I can download, I went to the site of Windows Media Center and they provide all the information on the issue...

  Hello shadowboi_2009,

  Welcome to the Microsoft Answers Forum!

  Here's what you need to configure Internet TV on your computer:

  ·         Have an active Internet connection.

  ·         Complete the installation of Windows Media Center.

  ·         Wait a few minutes for an automatic download complete.

  If you do not see these items of menu in a few minutes after the installation, go to:

  "" "" Tasks"settings" general "Automatic Download Options" Download now.

  After you download updates, these menu items appear in the Windows Media Center Start menu:

  1.Guide: a TV program on the Internet and broadcast TV program lists *.
  2. Internet TV: an experience of discovery Visual to see shows, movies and videos.
  3.promotions: direct links to specific Internet TV, movies and videos.

  Here is an article that will give you more information about this:
  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/Internet-TV/articles/Internet-TV-overview.aspx#access

  You can also see the article that will give you a comprehensive tutorial on the installation of the library:

  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/Internet-TV/default.aspx

  I hope this information helps, please get back to us if you have any questions on this subject.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to change the Windows Media Center guide to allow the use of ot TV relay stations (translators)

  Live TV with Windows Media Center, where RF channels are different from that of the guide because of the distance TV translators (relay Stations)

  Cannot change the guide to allow the use ot (translators) television relay stations where the RF TV channel is different from the current station. For example, Station POLO6N is 9 RF channel in Eugene, OR, but here on the coast, it is the 35 RF channel. Zip code for our region apparently points to the station itself RF channel and the number of 1092 is shown and dimmed so that it cannot be changed. How the inputs of channel can be modified to adapt to this situation? Here on the coast, we're out of range (mountains, etc.) of the station itself.

  BH

  I have apparently discovered a way to watch and record live TV using Windows Media Center where the geographical area is served by the translators of the TV and the.

  If you configure the TV channels using only NOT the guide and using Add missing channels feature to add and configure the channels you use before you download the guide, you can set the actual RF frequencies of TV translators serving your area. In my case, I had to add the letters TD after the call signs of stations so that when I load the guide, he be to point to the current channel.

  After having added all channels and before loading guide, check the reception using the function designed to help you in the pointing of your antenna. Then load the guide and your channel configuration is retained and stored in a file pref.xml which apparently replaces the channels.xml file created by the loading guide.

  Unfortunately, detailed documentation on the product missing apparently (help files I found only State to follow the guests), or I didn't find it. In all cases, you can use Windows Media Center to watch and record live TV if you live in an area served by the translators/TV relay stations with different channels channels over-the-aor real real TV stations.

  If you find that you need to change a channel, use channel add rather than the function Edit channels, clear the X in the box and start over with this channel.

  BH