Windows Media Center has suddenly stopped being able to see tuners. Error "could not find the tuner or all tuners are busy."

Original title: Windows Media Center has suddenly stopped being able to see tuners.

I am running Windows Media Center and have a 6 Ceton infinitv tuner connected to my network.  Since a few weeks things have worked very well.  Now suddenly after installing a faster wifi adapter, I get messages such as unable to find tuner or all tuners are busy... who don't feel like I can always go to the tuner by Explorer or chrome, by typing the address of it and it arises but also shows that it is set on the channels that I am no longer watching.  Any ideas on why WMC is suddenly acting when the only thing I did was install an a6200 netgear adapter, nothing has changed.

Hi Eviln,

Please contact Microsoft Community. I understand that you have a problem with the TV Tuner card, I will surely help you solve this problem.

This problem might have occurred because of these reasons:

1 conflict between third-party applications.

2 driver corrupted or obsolete.
3. wrong settings.

Try the steps listed here:

Method 1:
I suggest you perform a clean boot and check if it helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135/en-us

Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

Method 2:
If the problem persists, I suggest you to download and install the latest driver for TV Tuner card on the manufacturer's Web site and check if it helps.

http://cetoncorp.com/product-support/

Method 3:
If the problem persists, you can see the steps in the following article and check if it helps.

Watch TV in Windows Media Center: frequently asked questions

http://Windows.Microsoft.com/is-is/Windows7/watching-TV-in-Windows-Media-Center-frequently-asked-questions

See the article for more information.

Get help for your TV tuner
http://Windows.Microsoft.com/en-in/Windows7/get-help-for-your-TV-tuner

Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

Tags: Windows

Similar Questions

  • Windows Media Center has suddenly stopped working...

    I hope someone here can help me with this little mystery. Also recently 2 days ago everything worked fine on my Vista Home Premium machine. Today, I noticed that my TV shows that I put to record have not been recorded. I went to Windows Media Center and click on watch live TV and nothing happens.  There is no error message, no tv, nothing.  I click on the button of the tv guide and he says ' n channels are available in the Guide. «Select Configure to reconfigure the guide» When I put in place, try to download latest tv Setup options, but nothing for 10 minutes about the front away from me and tap on Cancel.  When I get to the implementation of the guide, I say I want to put up the guide, then it will display the EULA and when I press "I agree" media center will be either crash and restart, or if it does not, he will pick up to... download TV program guide internet connection.  I have an internet connection... I am writing on the same machine that I have problems with... so it's not the problem.  I use it very often, so I really need to get back to work.  Please try to help me. I don't have the money to pay Microsoft for technical support.
    '

    Hi rmetz527,

    To access the CBS, you need to run as administrator or connection with the default Administrator account.  Please send the newspaper here.  Also, did you try to scan for viruses and malware? It appeared that some system files are corrupt.  It is preferable to the SFC scan, malware scan, virus analysis and error checking once again in fashion without failure.

    How to get rid of malware
    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

    Error checking
    http://windowshelp.Microsoft.com/Windows/en-us/help/bc1393cf-9f9c-79C7-0f91-9337c2c41f811033.mspx

    Let us know the result, Kevin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Media Center "to listen or look at a conflict"... does not recognize the TV tuner

    I have completely exhausted the forum Windows Media Center for response to the resolution of this problem. I replaced my unit ATI TV Wonder Digital Cable Ready, as well as my graphics card tuner, and WMC still says 'No TV Tuner Found"and the message" listen or look at a conflict - no tuner available to meet the current demand "when I try to watch live TV. I have also a "no tuner hardware detected... Please ensure equipment is installed correctly...» "if I try to set up the TV Tuner again.

    I don't think that my answer lies in Windows Media Center or hardware from ATI. I'm now trying to figure out if it involves this feature installed at the factory of HP listed on the bottom of my computer: "GENUINE WINDOWS VISTA HOME Premium TUNER DIGITAL". I understand that it is the software and hardware.

    I would be grateful if anyone has answers. If anyone knows what this function is that was installed at the factory, and how I can uninstall and reinstall the software and replace the hardware, I understand that too.

    Thank you

    After unsuccessfully trying everything I could find that had the potential to solve my problem, I finally solved the problem myself.

    It's actually a corrupted Windows file that allows my TV tuner, which caused all my problems. I reinstalled my Vista operating system to its original state, and now the ATI TV tuner works fine. Easier said than done.

    Mr. Fix It

  • My Windows Media Player has suddenly stopped opening and launch, I can't access it at all! Why?

    Last night I was able to watch movies and listen to music on my Media Player. Today, I can not open it... No matter how I try to open it, I get a message indicating the failure of execution of the server. I don't know what happened or what I'm supposed to do! Pleeeeease help!

    Hello

    1. what version of Windows operating system is installed on your computer?

    2. What is the error message or an exact error code?

    I would suggest trying the following methods and check if it helps. It applies to Windows 7.

    Method 1:

    Run the troubleshooting Windows Media Player settings tool and check if it helps.

    Open the troubleshooter in the Windows Media Player settings:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

    Method 2:

    Re-register regsvr32.exe jscript.dll and check if it helps.

    Follow the steps to re - register the .dll file:

    a. click Start, type cmd.exe in the search box and right-click on cmd.exe and click run as administrator.

    b. type the command: regsvr32.exe jscript.dll and press enter.

    c. open Windows Media Player and check whether the problem is resolved.

    Method 3:

    Try to uninstall and reinstall Windows Media Player and see if it helps.

    Step 1:

    Uninstalling Windows Media Player:

    a. go to start and in the search type 'Turn Windows has or not'.

    b. click on "Turn Windows features on or off".

    c. find multimedia and uncheck the brand in the face of Windows Media Player.

    d. restart the computer

    Step 2:

    Reinstall Windows Media Player:

    a. go to start and in the search type 'Turn Windows has or not'.

    b. click on "Turn Windows features on or off".

    c. find the multimedia functions and place a check mark in front of the Windows Media Player.

    d. restart the computer.

    Hope the information is useful.

  • Windows Media Center won't add DVD files to its library which do not affect the disk C on Vista

    Hi people,

    I had Media Center works well with more than 104 GB of movies in the library.

    I ran out of disk space and a 1.5 TB drive was added to the system.

    Once this new space has been initialized, I moved all film to him records and updated the path in Media Center to 'Look' that new folder.

    Media Center can no longer see or read these films.

    I deleted all the files associated with the WMP 11 app (APPDATA\Local\Microsoft\Media player to rebuild the DB but no difference.

    Does anyone know how to activate the Library Media Center pull in DVD files outside the C drive?

    Thank you
    Derek

    Holy Cow,

    I just found the answer in an article at www.paraesthesia.com/archive/2008/09/12/how-to-set-up-a-dvd-library-in-windows-media.aspx

    The library 'Add folder' does not work in the Menu 'Settings' of Media Center.

    On the other hand, it works via a right click on the window of DVD library.

    IE: when you're in the Livrary DVD, right-click and choose Add movies.

    This is a bug not documented in Media Center!

    I finally got this animal working woooo hooo

    :)

  • Whenever I click on recorded TV I get this message "Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

    Title: original problems to access TV on Windows Media Center recordings

    My media center has suddenly stopped working for recorded tv.  Whenever I click on recorded TV, I get this message:

    "Windows Media Center has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

    All other features of the media center work correctly.

    Any help would be appreciated.

    Hi vater19,

    Remember to make changes?

    Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference

    Open the Setup TV tuner Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

    Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 3:  You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
    http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70

    Thanks and greetings

    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error: "Windows Media Center has stopped working. Windows is checking for a solution. "when tried to open it after installing the KB983590 update

    Original title: WMC no longer works after update of August 10

    Windows Media Center has stopped working after installation of my Windows 7 Professional pc all 11 updates gave me on August 11, 2010. I used system restore to the day before the updates, and install them individually. The first 9 no trouble with WMC. But the IE8 KB982664 for Windows 7 compatibility view list caused my action center to report that I needed to check the undeclared solutions to problems. WMC would still start. But after installing KB983590 .NET framework 3.5.1 for Windows 7 x 86, WMC has stopped working.

    After you uninstall update 2 above WMC would still not start.

    After using the system again restore forward updates, I installed the other 9 updated with, so far, no problem with WMC.

    New installation of Windows 7 Pro.

    V.1.0.1963.0 MSE completely up to date. [have not installed the latest beta version due to this problem]

    Former pilot Mig15. Now using Windows 7 Professional and Project Professional 2010 Beta.

    Hi Davy-D,

    Step 1: Perform the upgrade on the spot
    a. close all applications, insert the DVD into the DVD drive of the computer.
    b. in the settings window, click install now.
    c. click go online to get the latest updates for installation (recommended).
    d. type the CD key if you are prompted to do so.
    e. click Yes to accept the Microsoft software license agreement.
    f. on the type of installation do you want? screen, click upgrade.
    g. when the installation is complete, restart your computer and check the difference.

    See Method 2 of this article: http://support.microsoft.com/kb/958044/en-us

    Very Important: Run a repair installation will not damage files and applications that are currently installed on your computer. However we recommend that you back up data, performing the steps incorrectly can delete data.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Click recorded TV, it says that "Windows Media Center has stopped working, seeking resolutions... »

    I'm having a problem with Windows Media Center. It starts no problem, but when I click on recorded TV, it says that "Windows Media Center has stopped working, seeking resolutions... "If I click on TV guide there is no problem. I tried a restore, but for some reason any restore function has been disabled.

    (copy - paste from another thread - user has same question):


    You has not, coincidentally, happens to record last Friday (I think it is?) episode of human target (what happened to be replaced by a House reruns), did you?
    Reason I ask: it has been a little traffic on to thegreenbutton on the subject these days - and everyone who reported also arrived to try to save human target.  Somehow, the file finished with metadata is corrupted, what makes MC crash when you enter recorded TV (at best, it crashes when you select the program from the list.)
    FIX: Open Explorer and go to C:\users\Public\Recorded TV.  Find and remove "human Target__"(exemple: «La Target_WDIVDT_2010_10_01».) ".
    Start Media Center, and then try again.  Fixed?

    HTH,
    Chris

    MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Error message "Windows Media Center has stopped working" what Xbox Live is connected.

    Original title: TRY XBOX LIVE WITH WINDOWS MEDIA CENTER UI

    I have some setting wrong my XBOX Live interface with my computer. I get the message "windows media center has stopped working", immediately after the seizure of the 8-digit code provided by X - box in Windows Media Center. I dropped my firewall, I also allow all programs and open all ports to come through my firewall. What else can I try to remedy? Thanks, Cliff.

    Hey, Cliff,

    1. what operating system is installed on your computer?

    2. Windows Media Center works great if you do not connect Xbox Live?

    Follow the step in the article below and check if it helps.

    While trying to use your Xbox 360 as a Media Center Extender console, you receive the error message: "Media Center has stopped working".

    http://support.Microsoft.com/kb/932343/en-US (Applicable to Windows Vista)

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Windows Media Center has stopped working

    I get a message saying windows media center has stopped working, I also have one indicating Manager windows media center has stopped working, I think that there is also a manager of STF Windows as well. It's just so a new computer should have no probs. There is also something strange happens with my internet connection. I have all the bars of signal strength, but keep dropping out. Telstra have been of no help!

    I tried the SCF/scannow but I received a message "windows resource protection cannot perform the requested operation" achieved 63% then stopped.
    It was moved by John of microsoft, but the place where? still no answers.

    Hello Emma Howard.

    Thank you for your message.  Please follow the steps below to see if re-register components of the media centre will help to resolve the problem.
    Click on the 'Start' button > in the search box, type "Command" > right click on command prompt and select "run as Administrator".
    Once the prompt command opened in a high State, type the following shots entered after each line.

    Regsvr32.exe atl.dll

    C:\WINDOWS\eHome\ehSched /unregServer

    C:\WINDOWS\eHome\ehSched/service

    C:\WINDOWS\eHome\ehRecvr /unregServer

    C:\WINDOWS\eHome\ehRecvr/service

    C:\WINDOWS\eHome\ehRec.exe /unregServer

    C:\WINDOWS\eHome\ehRec.exe/regserver

    C:\WINDOWS\eHome\ehmsas.exe /unregServer

    C:\WINDOWS\eHome\ehmsas.exe/regserver

    Please let us know if it did or did not help to solve the problem.

    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Media Center has stopped updating the lists Guide for Windows 7

    Windows 10 will go out the next Wednesday July 29, 2015. I have Windows 7 and I have technical problems with the Guide in Windows Media Center lists. This isn't updated Guide lists and I wonder if this problem is related to the upgrade of Windows 10?

    I called a technician to answer Microsoft desktop and the technician fixed my computer errors. Unfortunately, he could not fix this problem. Even though I always reset and auto update of listings in the Guide, the result will prove be the same with "no data."

    Windows Media Center has given me many error messages:

    Windows Media Center

    "Windows Media Center has corrected a problem with your registration data and will download the Guide even once. You should review your records to make sure they are always planned properly. »

    Failed to download

    "The new TV configuration data could not be downloaded. Existing data, if any, will be used as you continue by configuring the TV signal. »

    Downloadable guide is not available

    "Downloadable TV Program Guide listings are not available due to previous failures of download. For more information, right-click on the Windows Media Center system tray icon and open Windows Media Center update log. Select back to try again. You may be able to get the TV show lists, if they are available. »

    Guide download error

    "The Guide could not be downloaded. For more information, then Windows Media Center system tray icon right-click and open Windows Media Center update log. »

    I can watch TV on the computer using Windows Media Center and manually record TV shows, but it is difficult for me to record TV shows without ads Guide on Windows Media Center.

    Note to update (as of August 2, 2015):

    The Electronic Program Guide (EPG) for Windows Media Center Guide ads was already programmed by zap2it until July 21. After July 21, zap2it is no longer can update the lists Guide for Windows Media Center.

    July 23, Rovi Corporation's new Electronic Program Guide (EPG) for Windows Media Center Guide ads.

    From 23 July, listings in Windows Media Center Guide is running back to normal for Windows 7 users.

    My Guide Panel is equipped with a selector more [on the listings in the Guide] where is the expiration date. I hope that Microsoft does not support Windows 7 WMC.

    Please don't waste your time trying to solve the WMC, it is the expiration of the license that is causing the problem. I know it's frustrating.

    On the other hand, is - can anyone say with certainty that WMC is available on Windows 10? No charge for the upgrade to Windows 7?

    The way I see it, not providing the function of key in W7 WMC guide is motivation upgrading to W10, assuming that WMC is available.

    Hopefully Microsoft will give us the fix for WMC in W7.

  • Receive the error "Windows Media Center Receiver Service stopped working and was closed" after the video card replaced

    I have a HP computer with Windows Vista Home Premium (32-bit) Service Pack 2.  He has a VISX PureTV tuner card and already had an NVidia GeForce 8400 graphics card.  This Setup has worked well for 2.5 years until what the graphics card died last week.  It has been replaced with an ATI Radeon HD3450 and both all Windows updates have made current.  Since that time, the TV tuner did not work.

    When you sign in to an account, it gives the error message "Windows Media Center Receiver Service stopped working and was closed".  I can use Media Center to watch the recorded video before, but if I try to watch live TV he hangs up and close Media Center.  If I try to configure the TV connection in Media Center it tells me that there is no tuner card.

    I looked at the map and see no problem and I tried it back in place.  He has the most up to date drivers (so does the new Radeon graphics btw).  I tried "Uninstall" in the Manager of devices and then put it back, but it was not good.

    "Windows Media Center Receiver Service Stopped Working and was closed" I tried all the fixes I've seen this error.

    I tried all the things I saw here and elsewhere related to this issue.  I did a "clean boot" with all non-Windows services and the disabled startup process.  He always did the same thing and gave the same mistakes.  It seems to be linked to a Windows service, and I hesitate to begin deactivation to track down.

    I ran 'sfc' in mode 'cmd' and he found no problem and none of the files to be fixed or could not fix.

    In the list of services, I changed the login for "Windows Media Center Receiver Service" to "Local System account", Local Service, Network Service and individual accounts, but no permits.

    I'm afraid I'm at the point of having to reload the Vista, but I don't know how to do this and want to avoid at all costs.  I don't have the recovery disks and software.  Is this enough?  Can I reinstall from the recovery disks without wiping everything aft of the configuratiion with which it was delivered?  I guess personal files will be OK (although I don't know this for sure), but I'm afraid I'll have to reinstall other applications, my family has developed over time and perhaps lose the media protected by DRM licenses.

    Someone has encountered anything like this or have any suggestions?

    Well, I finally stumbled into the solution.  It was caused by a conflict with another application.

    A few weeks before the card failure I had installed a program called video capture Replay Video Capture that I had bought a few months ago and never used.  However, at this time where everything including the TV tuner and Media Center worked well that's why I associate the problem with this software.  The problem comes after the system is rebooted the first time after installation.  In my case, it has not been rebooted until a few weeks later as part of the recovery of the fault of the graphics card.  Suddenly, the TV tuner did not work and I get the error messages mentioned in this title of the thread.

    I was at the end of my rope with this and was just to clean your system to do a reformat and reinstallation.  I uninstalled the Replay Videa Capture program to move it to another computer, and when you restart the computer I noticed that the error message disappeared.  Of course I went to the Media Center and could set up my TV tuner card and watch television.

    Looking for some info on this conflict, I found the following. (http://forum.applian.com//showthread.php?847-Conflicts-between-RVC-and-XP-Media-Center-OS&s=c0aec9897b51d550c47b919e73e59bfc)  It is difficult to say who is at fault in the present.  I'm sure that Microsoft accuses Applian for the encoder to mpeg (mcm2ve.ax) used in Replay Video Capture, while Applian says that the problem is a Windows process (ehrec.exe) that works all the time, hogging the tuner on the system device.  According to Applian other products similar to theirs have this conflict as well due to the process of Windows.

    Fortunately, there is a solution in this case.  Applian has released a new version of Replay Video Capture (version 4.2) that uses a different mpeg encoder and eliminates the problem.  Given the surprising lack of info about it on the Microsoft Web site, I wonder how many other people with this unresolved issue dealing with the same thing as me.  If you're like me and you don't usually need to reboot your PC for a few weeks at a time, you may never know to associate the problem with the application.  What a waste countless hours trying to diagnose, and most disconcerting, that's what I was about to go through a reformat and reinstall because of this.

    Thought I'd post here my problem resolution in the hope that it might help someone else.

  • "Windows Media Center Receiver service stopped working and was closed" - Windows Vista Home Premium SP2

    Several times, I get the error message "Receiver Service Windows Media Center has stopped working and was closed".  Windows then search a problem and suggests that I run the update.  I run the automatic update and am completely up to date.

    Any ideas of what could be the cause?

    Thank you
    jbthorsen45

    Then, I found my problem.  I have installed the Tivo Desktop Plus.  The codecs it uses to convert to different formats somehow in conflict.  So, I had to rename some of the files and he immediately recognized my Tuner card and Media Center is back to life.

  • Windows Media Center Receiver Service stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

    Started getting the error Windows Media Center feared about 3 weeks ago.  I have tried the MS fix, reflected on the web for solutions, have run sfc/scannow (no violation of integrity) and nothing works.  Cannot restore system it's been 3 weeks.
    System was working fine 1 day and then bam... error messages began to appear.  I can always go into Media Center and listen to music or watch recorded shows.  I just can't watch TV or record something again.   I checked the Device Manager - material and everything works fine. Need help please...   Thank you.

    I guess that's the article that you are referring to?

    Error message when you start a Windows Vista-based computer: "Windows Media Center Receiver Service stopped working and was closed".
    http://support.Microsoft.com/default.aspx/KB/936229

    This site has some good ideas for you to try.

    How to fix the Windows Vista registry entries and files Media Center
    http://blogs.msdn.com/astebner/archive/2007/03/16/how-to-repair-Media-Center-files-and-registry-entries-on-Windows-Vista.aspx

    "Windows Media Center Receiver Service... "Error
    http://thegreenbutton.com/forums/p/50233/223005.aspx

    http://www.Google.com/search?q=Windows%20Media%20Center%20Receiver%20Service%20stopped%20working&hl=en&RLS=com.Microsoft:-AU & output = search & TBS = rcnt:1 & tbo = 1

    See if the System File Checker can help you?

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
    http://support.Microsoft.com/kb/936212/#appliesTo

    See if you can isolate some processes of third party as the culprit?

    310560 How to troubleshoot by using the Msconfig utility in Windows XP
    http://support.Microsoft.com/kb/310560

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/default.aspx/KB/929135

  • Windows Live Mail has suddenly stopped working

    My Windows Live Mail has suddenly stopped working.  I get the error message below.  I contacted Time Warner - talked to 3 different technicians, each gave different instructions, of which none has solved the problem.  I contacted Microsoft and they said that they do not support Windows Live Mail.   I am able to access my e-mail through Time Warner Webmail, but I want to get Live Mail works again.  Can anyone help?

    Can't send or receive messages on behalf of Wi.rr (jxxxxx). Windows Live Mail could not open a session secure e-mail server using password authentication. Contact your e-mail provider and verify that it supports secure password authentication. To change the connection setting, in the folder list, right-click on the account name, and then click Properties on the shortcut menu. In the Properties dialog box, click on the servers tab, and then under incoming mail server, select a logon option.

    Server error: 0x800CCC90

    Server response:-ERR an authentication mechanism MUST be entered

    Server: 'mail.twc.com '.

    Windows Live Mail error ID: 0x800CCC18

    Protocol: POP3

    Port: 110

    Secure (SSL): No.

    Windows Live Mail could not open a session using authentication Smail server fix Password has.

    I don't think it's something that 'suddenly' happened. Does not support the server you connect to SPA, so if you have this option, you will be not be been able to connect to this server. You may have changed the setting to try to solve another problem?

    Right-click on the account name in the folders pane, and then select Properties. On the servers tab, select connect with authentication in clear text. Then try send/receive for this account. If you see an error message, please copy and paste into your answer.

Maybe you are looking for

  • my toolbox disappeared

    How can I recover my toolbox? Suddenly, he's gone. Thank you.

  • 2000-361NR HP: System disabled due to bad administrator passwrod

    I recently got this phone and I turned it on and it wants me to enter the administrator password after 3 trys it turns off the system and has this code 60348315 can u help me please.

  • Names of PV EPICS DSC

    I played with the server of e/s embedded in the Module DSC to LabVIEW 2009 EPICS. It's nice to have this native server, but he insists on adding the prefix each Variable name with the name of the computer process. In other words, if my machine NETBIO

  • Change the Data Type to node e/s on PXI-7841R FPGA

    I would like to change the data type for the node FPGA of e/s on my card FPGA 7841R (simulation). So far, I have raw data (I16). I want to test something with the calibrated data (FXP). The cRIO, you usually go to the properties of module to change t

  • Im having a problem with windows update.

    Im having a problem with windows update. I am running windows vista.seems as it downloads the updates, but when he tries to install I have three different error codes.  80200053 80070570 - FFFFFFFE.  Help.