Windows Media Center is unable to start with RF remote control

WMC to: 6.0.6002.18242 (Vista SP2 - gdr.100414 - 0533)

Remote control: Medion OR28v Vista remote control made by x 10 RF

1. a couple of days, I tried to start WMC with my remote in the normal way, but nothing happened at all. Normal start was always activate WMC remote once the model has been started.

2. Subsequently, I reinstalled the original drivers of my back on my hard drive. I then did a Windows Update and 2 X10folders have emerged, (X10HID and X 10 Transreciever(ACPI Complient) Wireless USB device)

3. now, the remote has yet acivate WMC, after a start UNLESS I go into the PANEL... click on WIRELESS REMOTE SETTINGS... on which WMC activated instantly! (the channel also change Panel that appears, and then had to be cancelled)

4. I can also activate WMC in the mouse in all THE PROGRAMS by clicking on the folder WMC

5. I can now use all the functions in the usual way on the remote control. Also can I resart WMC at any time with the remote until I reboot/start.

6. to reinstall the original drivers, para 2 refers, no functions of the remote control could be used even when starting the mouse during activation of WMC in the folder all THE PROGS of WMC

.

Thus, PES Advisor How do I get my remote to turn on the WMC after start/restart, notes: the remote control to activate all the functions but only when the WMC is active in the alternative path as described above (paras. 3 and 4)?

It seems that nobody here knows answer (including me). I suggest that repost you this on The Green Button forums, there are some experts WMC.

Tags: Windows

Similar Questions

  • Windows media center picture library is corrupted with thousands of photos? They will not delete

    Windows media center picture library is corrupted with thousands of photos? They will not delete what I can do?

    Windows media center picture library is corrupted with thousands of photos? They will not delete what I can do?

    WMC uses the same library of WMP. If you need to restore library WMP to solve the problem.

    Can not delete the songs from Windows Media Player

    Very same thing applies for photos too. Just follow the step by step procedures.

  • How can I reinstall the Windows Media Center Gadget on my PC with Windows 7, 64-bit?

    How can I reinstall the Windows Media Center Gadget on my PC with Windows 7, 64-bit?  I had left it one day and now I don't know where he is. I went into the control panel and tried to 'Restore the Gadget', but he said it was not something to restore. I don't know how to get the file from one account to another, if that's what I'm supposed to do. I just want to know how to get the original back that came when I downloaded Media Center for the first time (that I tried to do it again. "But it did not help at all).

    Thank you.

    It's actually pretty easy if you are in the control panel for programs

    Control Panel - programs-

    There is an element under the gadgets 'restore the desktop gadgets installed with windows' which includes Media Center gadget

  • Windows Media Center is unable to use my dvd recorder

    Windows xp SP3

    Deliver you with Windows media Center

    'Create disc' (in the photos) it is endlessly with cd/DVD required please try again.

    I checked the DVD recorder can burn using isoburn, it does.

    I can also burn music using Windows media player. So the DVD recorder works defiantly.

    I've updated all the drivers and software and I'm stuck. Any advice would be helpful.


    Thanks for the replies. I decided to restore the original configuration, it authorized the error. At soon K

  • Windows Media Center is unable to output Dolby Digital/DTS via SPDIF... only stereo PCM is sent

    Hello

    I recently bought a desktop computer HP Pavilion with Vista Home Premium (64 bit) 5150t.  The PC comes with a TV tuner and it works well with Media Center except that it cannot output Dolby Digital (or the other program on the air with JJ or DVDs of films that have a DD) outside of my A / V receiver.

    My Board has Realtek HD Audio and I activated the digital (SPDIF) output in its program.  I put the "Properties" of the digital output in support of * TWO * DTS and Dolby Digital encoding.  When I press the 'Test' button for either format, outside A / V receiver correctly recognizes the format, so the problem is not with my receiver.

    Read forums and online help notes, I strongly suspect that the codec MPEG-2 by default for Windows Media Center is not configured correctly for cross DD or DTS - it somehow always stereo down-Mix before sending to SPDIF.  Could you tell me how to check and change codec setting?  Thank you!

    -Colin

    Hi Chow Ho.
     
    This problem occurs because the DirectShow component and audio decoder MPEG2 in Windows Vista does not correctly support DTS pass through S/PDIF or HDMI.
     
    To work around this problem, click to select the box Audio DTS and Dolby Digital check box in the SPDIF Out properties dialog box or the dialog box Properties of HDMI Out .
     
    You can also check out the link below for more information:
     
    http://support.Microsoft.com/kb/940685
     
    I hope this information is useful.
     
    Please let us know if you need further assistance.
     
    Concerning
    Rehman - Microsoft Support

  • Windows Media Center cannot sync/set up with AT & T UVERSE

    Windows Media Center cannot configure/sync with my cable TV box. ((See system put in place/info below)

    I spent about 10 hours trying to solve this problem.  Tried every way Windows Media Center allows you to configure, automatic, manual (tried all listed codes), IR remote learning. I searched the web, talked with HP technical support for more than 3 hours, talked with Motorola, ATT UVERSE, someone seems to have a solution.  Based on troubleshooting, I have it so far, I'm a 90 + % sure it's soley configuration of Windows Media Center TV of UVERSE problem of decoder.

    I can get a TV signal on the computer through Windows Media Center and get my cable TV box to make it work, but it's as close as possible. The remote control works, all connections are correct, IR blaster or transponder is located correctly on my TV receiver.

    In the IR remote control learn installation manual configuration (I think this is one of the two) or Windows Media Center asks you to press and hold the "0" on your remote decoder, pointing to your receiver IR from PC.  When I press on it it seems to answer by saying to continue to hold then it ask you to release what I'm doing, then I get an error message.  It is the closest, I learned to operate.  I tried a few tricks/variations on this that I found on this site and others, but not luck.

    Another question the image that I get, but cannot control with Windows Media Center is of very poor quality (worse than a bad cell phone video on youtube), I guess that's more hardware related issue, but I had a machine good enough speced. Also, there is a time delay major and variable (4-5 seconds) between the time you press a button on the decoder TV and you see the answer on the machine, which makes it very difficult to operate.

    I keep trying to stay on the PC band wagon, but of course, the other side seems to be much less difficult to get simple things to work.

    Anyadvice is appreciated.

    COMPUTING: NEW HP Desktop (updated all the software) - Windows 7 Professional - 1 GB ATI Radeon HD 4850 - TV tuner, ATSC-NTSC with PVR, remote - Intel i5 - 8 GB of SDRAM. TV SERVICE: AT & T Uverse - Motorola VIP1200 box

    http://www.eggheadcafe.com/software/ASPNET/30978261/att-UVerse-and-Media-Center.aspx

    the post titled "hey guys" posted August 8, 2009 should help out you. I managed to set up my own using the info there. Poor quality looks like a standard old school SD tuner in your pc.

  • Windows Media Center does not work when on a remote desktop session

    I have just Setup Remote Desktop on my local server and connected my laptop... whew that was a task in itself!

    Server - Windows 7 Ultimate w/Media Center installed

    Laptop - Windows 8 Pro w/Media Center installed

    I am able to run the Windows Media PLAYER on the remote desktop, and it seems to work fine after that I added the libraries to it.

    BUT

    When I run Windows Media CENTER I get a message that "Windows Media Center has stopped working... Windows is checking for a solution to the problem. "The message goes away and that's it.

    Anyone got any ideas on how I can get the WMC to operate on remote desktop?

    Not very well why this would be considered as a matter of "ITPro.

    It's probably debatable that MS really intended for MC to be used via RDP, I'm not sure they believed that the feature has been used very well at all judging by what they were doing in Windows 8

    However, there are two possibilities on the cause of this. An update of the RDP client can be the culprit, but it is not always a good idea to block any update.

    You can also the following reg key

    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Terminal Server\WinStations\Rdp-Tcp

    added needs of the user group have included in its read access permissions. You can also use the run as Administrator option when you start Media Center.

  • Windows Media Center learned remote control cable, cannot recognize the Windows Media Center remote control

    Running Vista Home Premium 64-bit.  I rent a cable box so I can get some programs at the 3-digit level.  When I've set up my Windows Media Center (WMC), WMC learn successfully the cable box remote 1 - channel upward.  My problem is the next step and change the channel using the Windows Media Center remote control or keyboard.  My keyboard or the WMC remote will change the channel.

    I got Windows Media Center to re - learn the cable box remote control twice, which is always successful, but again once, when the time comes to use the Windows Media Center remote control or my keyboard to change the channel, the channel does not change.

    Could someone please help me with this?  Thank you in advance.

    Hey kansascitykid,

    If you receive your TV signal through a set-top box and Media Center is unable to change the channel, or it changes channels incorrectly, check the following:

    ·        The infrared diffuser is connected to your remote control receiver. If the infrared diffuser is not connected, Media Center cannot send a signal to the set-top box to change a channel.

    ·        The infrared diffuser is well positioned at the front of the set - top box. If you are having trouble placing the IR blaster on the set - top box correctly, try to use a flashlight to locate the signal on the set - top box receiver.

    ·        IR control codes are configured correctly. If constantly changing channels, control IR codes may not have been configured correctly during the installation of TV signal. To reconfigure your TV signal, on the Windows Media Center start screen, highlight toTasks, clickSettings, click on TV, then clickSet up the TV Signal.

    • Center cannot send a signal to the set-top box to change a channel.

    More information here: problems with watching TV on your computer

     

    Also have a look if you find useful suggestions in this thread.

     

    Microsoft Media Center remote with pace DC50X 1039, Setup box cannot change channel

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Media Center in Vista Home Premium must be restarted every other time I start a video

    Every other time that I select a recorded program to watch, Windows Media Center gives me a message that the drivers are not installed or loaded properly and I need to restart Windows Media Center.  What is happening with this?  I am running Windows Vista Home Premium version and keep my computer up-to-date.

    Hello
     
    There is no option to download the system files.
     
    If scan sfc does not resolve the files, you can follow the rest of the troubleshooting steps in the article to fix corrupt files: http://support.microsoft.com/default.aspx/kb/929833
     
    Try the steps and check the result.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.
  • Xbox 360 connects to Windows Media Center (Windows 7-64 bit)

    I can't get my Xbox to connect to Windows Media Center.  When I ran Vista it would work, but now that I am on Windows 7, 64-bit, it just does not connect.  The strange thing is that I'm able to share media from my PC to the Xbox without fail.  In addition, Windows Media Center has detected the Xbox on the network.  But for some reason, the Xbox cannot find the Windows Media Center.  It makes no sense at all.  I even tried disabling the Windows Firewall to see if it would work, but it didn't.  There is no other firewall in my home network.  Help, please.

    Hi Imautobot,

    You may need to configure the Xbox extender for Windows Media center for Xbox to work.

    Step 1: Get the key Setup of Xbox 360
    1. on your console, go to my Xbox, and then select Windows Media Center.
    2. follow the on-screen instructions.
    3. write down the 8 digit Media Center Setup key.

    Step 2: Add an Extender on your computer
    1 start Windows Media Center.
    2. click on tasks, and then click Add Extender.
    3. When prompted, enter Xbox 360 8-digit setup key.
    4. complete the configuration of the Extender.

    See the links below: connect your console to the Windows Media Center: http://support.xbox.com/support/en/us/nxe/xboxlive/troubleshooting/NetworkHelp_mcxpc.aspx

    Enjoy Windows Media Center on the Xbox 360 with your music, photos, Live Recorded TV and online media: http://www.Xbox.com/en-us/pcsetup/MCEWindows7.htm

    http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/Extenders/tutorials/Extenders-Xbox-config.aspx

    Set up a Windows Media Center Extender unit: http://Windows.Microsoft.com/en-us/Windows7/set-up-a-Windows-Media-Center-Extender

    Tips for solving problems with Windows Media Center Extender Setup: http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

    Thank you, and in what concerns:
    Swathi B - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My Windows Media Center has disappeared

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: my Windows Media Center has disappeared. I did research has suggested this site to see if it is installed on my computer and it is not. It was on my computer when I bought it, then she disappeared a few months ago and I tried to understand why.

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello
     
    1. who is the edition of Windows Vista installed on the computer?
    2. Windows Media Center display in the start menu, list all programs?

    Windows Media Center is available only with Windows Vista Home Premium and Windows Vista Ultimate.
     
    We recommend that you create a new user account and check if there is the Windows Media Center. To do this, try the following steps.
    1. open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
    2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. click on create a new account.
    4. type the name you want to assign to the user account, click an account type, and then click on create an account.
    5 restart the computer and the connection to a user account.
    6. check if Windows Media Center.
     
    For more information on "Fix corrupted user profile" visit this link:
    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.

  • Why is there no online media tab in my Windows Media Center?

    I had never used Windows Media Center until I saw a video of a person using a console Xbox 360 as an Extender so I got interested and downloaded the Media Center and added my Xbox as an Extender. Then I noticed on several videos other users with a "Online media" tab right on the 'Sports' tab and above the 'Tasks' tab However, this is not the case on my Windows Media Center on my PC or my Xbox 360. I did a lot of research trying to find a solution and made a "Auto fix" download as well as in numerous trouble shooting research and reinstall nothing doesn't. I noticed a few other forums on this subject, but they all just claim that it does not appear on their Xbox and so the question never gets answered. The problem is not with the Xbox, but it's with the Media Center because the way in which it does not appear on the PC either. I use Windows 7 also. Help, please!

    Hi Skyler333,

    Make sure that you have configured the Windows Media Center.

    Follow the steps to access the Internet via Windows Media Center:

    a. click Start, and type Windows Media Center

    b. open Windows Media Center

    c. in Windows Media Center, click tasks

    d. click settings

    e. click on General

    f. click Windows Media Center Setup

    g. click set up Internet connection

    h. now follow the wizard to set up Internet via Windows Media Center.

    You can also see the following articles for more information about Windows Media Center:

    Windows Media Center

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Media-Center

    Set up Windows Media Center

    http://Windows.Microsoft.com/en-us/Windows/products/Windows-Media-Center/set-it-up

    Entertainment on Windows Media Center

    http://Windows.Microsoft.com/en-us/Windows/products/Windows-Media-Center/entertainment-and-media

    Hope this information helps.

  • Windows Media Center not opening

    Every time I open Windows Media Center, it says windows checks for a solution for this problem.  Then it closes. Media Center does not open.

    Hello jodoloy,

    Thanks for posting on the Microsoft answers Forum.

    I uninstall and then reinstall Windows Media Center, to see if that helps to clear all corruption.

    Uninstall and reinstall the Windows Media Center:
    Step 1.
    Uninstalling in Windows Media Center:
    1. go to start and in the search type "Turn Windows willing or not.
    2. click on "Turn Windows features on or off".
    3. search for multimedia and uncheck the brand in the face of Windows Media Center.
    4 restart the computer
     
    Step 2.
    Reinstall the Windows Media Center:
    1. go to start and in the search type "Turn Windows willing or not.
    2. click on "Turn Windows features on or off".
    3. find the multimedia functions and place a check mark in front of Windows Media Center.
    4 restart the computer.

    Now you are able to open Media Center? If this isn't the case, then go to the event viewer and look for the application event log. See if there are errors for Media Center and then then list them here.

    Please answer back with an update and let us know the result of your problem.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Windows Media Center has stopped to display images. I am running windows 7 64 bit and the photo folders are visible but empty.

    I am running windows 7 64 bit and just recently I cannot see my photos in media center. Show folders that contain pictures, but they are empty. Also, I went to the folders in my computer and tried to open some of my pictures with media center, and they will not open. This is something new because I've always been able to see my photos in Media center. Everything in Media center works great.  Help

    Hello

    1 have you ever done any recent hardware or change the software on the computer before this problem?

    2. the functions of Windows Media Center are intact?

     

    Method 1:

    First upward, to try and perform a System Restore to a State previous when the Windows Media Center worked very well.

    What is system restore?

    http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed. System Restore helps you restore system files from your computer to an earlier point in time.

    Method 2:

    Turn off the feature and reactivate it:

    a. click Start, type appwiz.cpl and press ENTER.

    b. in the programs and features window, click enable or disable the functionality of Windows in the left navigation pane.

    c. find the Windows Media Center and uncheck the option.

    d. restart the computer.

    e. navigate back to the same location and activate the option back.

    Method 3:

    Refer to this link to learn more about,

    See the photos and videos in Windows Media Center:

    http://Windows.Microsoft.com/en-us/Windows7/view-pictures-and-videos-in-Windows-Media-Center

    To troubleshoot issues with images and videos in Media Center show,

    Working with pictures in Windows Media Center: frequently asked questions:

    http://Windows.Microsoft.com/en-us/Windows7/working-with-pictures-in-Windows-Media-Center-frequently-asked-questions

    Method 4:

    Reregister the following files.

    a. close Windows Media Center.

    b. click the Start menu, type cmd.

    c. right-click on the cmd option in the start menu and select run as administrator.

    d. type in the commands one by one by and press ENTER after each one.

    Regsvr32.exe atl.dll

    C:\WINDOWS\eHome\ehSched /unregServer

    C:\WINDOWS\eHome\ehSched/service

    C:\WINDOWS\eHome\ehRecvr /unregServer

    C:\WINDOWS\eHome\ehRecvr/service

    C:\WINDOWS\eHome\ehRec.exe /unregServer

    C:\WINDOWS\eHome\ehRec.exe/regserver

    C:\WINDOWS\eHome\ehmsas.exe /unregServer

    C:\WINDOWS\eHome\ehmsas.exe/regserver

    e. restart the computer.

    f. restart Windows Media Player and see if the problem persists.

    I hope this helps!

  • Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

    Please help - it's driving me crazy! I got this to work!

    I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
    "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

    I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

    My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

    I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

    I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

    I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

    The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

    On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

    Any help would be really appreciated!

    Hello Lowwatts,

    Microsoft Xbox 360 community

    Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

    Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

    Community Microsoft Xbox360

    Try following the steps in this article:

    Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

    This should solve your problem.

    Let us know if these steps solve your problem.  I hope the information is useful.

    Kind regards

    Anthony
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • How to sync iTunes with iTunes ext HDD iMac?

    Hello I can't afford to buy the 256 GB MacBook Air, then I'm the one with only 128 GB. When I launched my iTunes, I pressed down option and select the external HARD disk where I put all the songs. Songs in iTunes external HDD has been copied from my

  • Satellite X 200-252 and Vista mixer problem

    Hello My Satellite X 200-252 runs under Vista Home Premium operating system. I have a strange problem with sound engineer. After (I think) some security patches applied my vista has ceased to recognize the audio device.The icon in the task bar on the

  • Equium A60: How to get the display on TV?

    Can someone give me details on how I can get my Equium A60 (with ATI7000 graphics card) display appears on my TV? I tried to use the S-video out to TV s-video but the ATI displays tab said that the TV is not connected. I tried to boot up the laptop w

  • monitor 2309M: I can't find the official drivers of 2309M

    Hello Sorry for my bad English. Can't find the official drivers for monitor 2309M (win 7 64) http://support.HP.com/it-it/product/HP-value-23-inch-displays/7274744/model/3878547 Thank you cuzzotto dal Bye

  • ini to physical channel DAQMX channel

    I would like to save all my physical channels DAQMX as strings in an ini file.  My program reads information in string and convert to the physical channel DAQMX.  Is a kind ride the only way to convert a string to a type of DAQMX channel?  I wanted t