Windows Media Center showing does not in all programs

Similar Questions

• Windows Media Center EPG does not have the correct data

  Windows Media Center EPG on my computer is so ugly!

  Description is separated in two, and it's always the last part that displays first, so you'll have to roll down to the bottom to read the description.

  The series is difficult to use, because the series 1) is not always marked as series (so you can select 'plain' Record), and 2) the title contains often series of numbering (e.g. "the bodyguards (1:6)"), so even if it is marked as a series, it will record ever "Guards body (2:6)" or other titles (the Media Center will just try to record any episode of "Bodyguards (1:6)").

  It is the broadcaster who create * data, and then displays in Media Center via Broadcasting Dataservices Ltd., or who are the last to blame?

  What is MS Media Center that does not have the correct data?

  I am in Denmark, if this has an impact on the response.

  Thank you and best regards!

  Hello

  Thank you for your response. I appreciate your time.

  I suggest you to post your query on our MSDN Forums, as this issue should be better there.

  Please refer to the reference to the link below to send your request:

  http://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information helps.

• Windows Media Center Guide does not correct list shows

  I use a Vista Home Premium, the other day I reformatted my computer because I had problems with it. everything went well and media center opens and works very well. However, it used correctly list indicated in the guide, no matter what I do, and it worked properly before the reformat. The channels are listed correctly, if TBS is supposed to be on channel 2, according to the guide, is, therefore, when I go to channel 2 I am indeed on TBS station, BUT even if the show is listed as 'Home' in the guide, which is in read mode is like Sienfeld or some other show. Even when I record programs when it starts recording it will tell me 'Reecording House' and when you go to channel his record some other show is apparently on at that time.

  I tried completely relative to the implementation of the centre, tried to re-do ads guide by using 3 or 4 different postcodes, tried to look in my BIOS to see if my system clock is off, I tried looking for an updated driver but can't find the Media Center or don't know what it's called , and nothing has worked so far.

  What is the problem with my Media Center? Is an off clock that actually play the shows at the wrong time? I've been home 3 days now so please if you know EXACTLY what is wrong just to give me a bunch of things to try, and I'll try them

  Thank you

  -Eric

  Hi eps3742,

  This can happen if the media center guide downloads information guide incorrect.
  I suggest that you try to re installation guide and download the guide for registration again and check if it works.

  To set up the Guide listings

  To find your favorite programs more easily, you can configure your Guide lists to match your local service provider's guide listings.
  1. on the Start screen, navigate to tasks, click settings, click TV, click Guide, and then click Set Up Guide ads.
  2. follow the instructions on the screen to configure the list of Guide for your region.

  If you are prompted to select a TV provider and you do not know which one to select, control a recent draft Bill or statement from your TV service provider to find the appropriate information.

  The providers listed in Windows Media Center vary according to the Postal Code or ZIP. If the supplier subscribe is not listed for the ZIP or the Postal Code entered, try entering local codes find the appropriate Guide listings.
  
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-Guide-listings-for-use-in-Windows-Media-Center

  I would also say that you check if the time zone in windows is set correctly.

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-the-clock

  If the previous step fails, then try to download the cumulative update of the Center media of the KB article below and check.
  
  June 2009 Cumulative Update for Media Center for Windows Vista
  http://support.Microsoft.com/kb/967632

  Troubleshoot Guide downloading problems in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-guide-downloading-problems-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The keyboard on the Windows Media Center screen does not appear when I hit the enter keyboard key!

  I searched through the internet trying to find a solution to this annoying problem: after change to enter the registry and the application of the value entered for showOskOnKeyboardEnter under MCE. PerUserSettings, I always have problems serious on-screen keyboard to appear by using the key "Enter" on the keyboard.  I managed only a couple of times to get the OSK to appear among the dozens of attempts, however, I am unable to recreate the actions - is absolutely not stable.  The only area that reacts to the 'Enter' key is looking for music.  All the fields in the section of Netflix and movies search fields are unresponsive.  Not even works tap triple function.  The only compatible and possible way to have the OSK appear is to double click on the field - that does not work given that the goal is to have an IR remote with the Media Center application interface.  The button 'OK' on the remote control is mapped to the Enter key (except if WMC has a key code value for the 'OK' button).  Help, please!

  I had this problem and it was very frustrating.  The posted solution did not work for me initially.  What I've discovered, is that you have closed Media center before editing the registry.  If you change it while it is open it does not pick up the change and then save settings (i.e. with showOskOnKeyboardEnter = 0) when you close.

  Then...
  1 close Media Center.
  2. follow the steps of the posted solution: http://mymce.wordpress.com/2011/04/20/on-screen-keyboard-in-windows-media-center-doesn ' t - appear /
  3. Open Media Center.
  Should work now.

• Windows Media Center displays/does not play videos in folders of same accurate as they have always been saved

  Videos that previously played by Windows Media Center (which came installed on my laptop) suddenly stopped appearing in Windows Media Center records, although some videos (very few) are always show and play exact same files on my hard drive as videos which stopped working.

  I don't know that I did something to cause this, although maybe I did, inadvertently, or certain updates or new facilities caused program.

  Please help, I use Windows Media Center as my main videos media player. Windows Media Center is not connected to a TV, just use it as a media player on my laptop.

  He also noted - I recently moved several files from my hard drive to an external drive, if it will be of any significance.

  Thank you.

  you go into media center tasks and add new locations to
  storage/libraries? some external drives can be a problem, too.
   
  best bet is a system restore. You can CANCEL a system restore if it does not work.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• The product key for the Windows Media Center 8 does not work!

  I tried 3 or 4 times to use the product key for the Windows Media Center 8, that you sent. But it keeps saying "this key will not work. Check it or use a different key. "I tried too communicate with someone who could help me and now I am very displeased with Windows. I tried several times.

  You are running Windows 8 or Windows 8 Pro? Media Center requires that you run Windows 8 Pro and your installation must be enabled.

  http://techingiteasy.WordPress.com/2012/11/29/how-to-get-your-free-Windows-Media-Center-key-for-Windows-8-Pro/

  Add the feature does not

  To work around this problem, disable the Nalpeiron Licensing Service until you try to install the feature. To do this, follow these steps:1.Swipe from the right edge of the screen, and then click search. Or, if you use a mouse, point to the corner bottom right of the screen, then click on search.

  2. type services.msc, and then press or click on Services in the results of research.

  3. press on or double-click Nalpeiron Licensing Service or NLS.

  4 tap or startup type-click and select disabled.

  5. press or click OK.

  6. restart the computer.

  7 install the feature and then restart the computer.

  8. Repeat step 1 to step 3, and then change the startup type for the licensing of Nalpeiron or NLS on automatic Service.

  9. click OK and restart the computer.

  The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

• Xbox 360 Windows Media Center Extender does not connect after upgrade to Windows 7

  Xbox 360 Extender worked fine on Vista Home Premium (32 bit). After the upgrade Windows 7 Home Premium (32 bit) on-site, when I turn on Xbox and the attempt to connect to Windows Media Center, you get an error saying unable to connect.

  Back on the Windows 7 PC, I see the mcx1 file it under the users folder. But when I got to the tools, it says no set Extender in place.

  Someone at - it suggestions on how to change settings in Windows 7 while the Xbox can connect?

  Just in case someone encounters this problem, here is what I did:

  1. reboot the Xbox until Windows Media Center connects.
  2. back to the PC. Start Windows Media Center.
  3. go into tasks > settings > Extender
  4. Select Xbox 360 Media Center, then delete.
  5 PC removes the old mcx1 folder used to use with Vista.
  6. start the Xbox, go to Windows Media Center
  7 write down the code on Xbox's 8-digit ' display
  8. on the PC, you will be prompted to set up the Xbox extender
  9 follow the instructions to enter 8 digit code
  10. new file will be created, mcx1-PCNAME.

  You're all set on 7.

• Windows media center extender will not play all my mp3

  I used to listen to music from my pc to my xbox recently just windows media center extender. but when I play certain songs, I get an error that says: an error has occurred and may not play a few songs, but some of my other songs play fine. When I went to look at my library, I noticed that some of the songs had a yellow padlock in front of the icon. I looked through the properties and could not understand anything the thing he looked the same as a normal file for me. any ideas?

  Looks like that the songs can be protected by DRM (Digital Rights Management). You are able to play the same songs with Windows Media Player?

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions
   
  http://Windows.Microsoft.com/en-us/Windows/downloads/WMPlugins
   
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• My copy of windows media player 11 does not play video.

  My copy of windows media player 11 does not play video. When you try to play the video (usually an avi file) I get audio and visualization. I tried to uninstall and install new, but does not. I chose also to all types of files media player by default but video still does not play.

  An avi file is simply a container that may have different types of files in it for video and audio.

  You probably don't have the correct Codec to play the video.

  Either download a codec pack such as K-lite or download a little program called G-spot, open it and drag your avi file in the center of the small window of G-spot.

  It will then tell you what Codec uses the avi file. You can then Google that particulat Codec, download and install it.

  See you soon,.

  Jerry

• When I copy a CD in Windows Media Player 11 does not apply media information.

  With the XP sp3 operating system, I rip the CD purchased and Windows Media Player 11 does not apply media information. Either he gives and error saying that it cannot be done because I am not connected to the internet while I'm connected, or it can recognize my internet connection, but I have to do a manual search and manually apply the name of each track, even if they are present and order under each line I have to click to match the name of the correct track.

  It's so frustrating to have to fight manually for applied information on the media which is clearly presented, and after all, album art that shows correctly in the finder info media constantly refuses to fill in the library and I have to go to a separate Web site and copy and paste it in. Yes, he found elsewhere on the internet, with the help of the connection which was present all along!

  It's crazy, the info is already there! And why do I go online in any case the info is in the CD? This doesn't seem to be a problem with the previous players. Please provide a fix for this useless, frustrating dinosaur, waste of time, a process!

  Have you tried to delete temporary Internet files and the Cookies in Internet Explorer?

  If you temporarily disable your firewall software, which helps? This could be a third-party firewall, like Symantec, or the built-in Windows Firewall.

• The Windows media player 11 does not work correctly

  My windows media player 11 does not work properly

  whenever I go to open a video with it, it appears on the taskbar, you can here the sound, but the player himself does not appear on the destop

  I tried to reinstall the drive, and I get the same thing.

  If I go to roll back the player, add remove programs say it has been restored, but the media runtime in Add Remove programs won't disappear because it says that windows media player 11 is always there.

  Help

  Hello rockys_rod,

  To fix it, simply remove your old library files. Then have Windows Media Player find your new files. It will not destroy your music files.

  How to get WMP to re - index your music:

  1. close Microsoft Media Player.
  2. click on Start and then run
  3. in the box, type the following:
  [list] %USERPROFILE%\Local Settings\Application Data\Microsoft\Media Player

  4. click on OK and a folder containing your library files will be displayed
  5. delete all files ending with .wmdb
  6. open Microsoft Media Player
  7. press F3
  8. Select the addresses of your music files
  9 WMP will re-index your music.

  If this does not help, try the FixIt in the article below:
  KB Article ID: 947541 -Windows Media Player stops responding after you install a third-party product that registers its own version of the Wmp.dll file

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Media Center visualizations will not work

  My Windows Media Center visualizations will not work for some reason any. its been like that for a while.
  When I listen to music and want to see my office shows that the program is still underway
  I thought it has something to do with the visualizations I instaled on Windows Media player
  (like ribbons and Upcube)
  I tried to remove them, they either come back or he will constantly ask me to go to it

  my system is portable

  • Windows Vista Edition home premium
    • Intel core 2 DUO

    32-bit operating system
    2.00 GB

  I missed a CD command before the directory (since corrected) so orders would be as follows:

  CD C:\program files\windows media player\visualizations\
  
  DIR

  You'll see the DLLs listed here, they are visualizations that have been installed (if the author decided to use directory default visualizations) NOTE: there may also be cases where the author badly spelled directory visualizations and used something like "visualizations".

  regsvr32.exe - u nom_fichier.dll  (use only the indicated file name that you want to remove)

  repeat if necessary.

• Windows Security Center service does not turn

  Windows Security Center service does not turn

  In the status bar on the lower right, a flag with a red cross appears. When I clicked it, a window has popped up - Action Center

  He gave me an important alert to turn on Windows Security Center Service - when I pressed the button to do so, the following message appears:

  Could not start the Windows Security Center service.

  I tried to get help from the previously posted example from 'services' solution, but when I did it I got the following error:

  One or more ActiveX controls could not be displayed because that is:

  (1) your current security settings prohibit running ActiveX controls on this page, or

  (2) you have blocked an editor of one of the controls.

  For example, the page may not display correctly.

  Help, please.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  You can try the steps suggested by Suresh in the link given below and check if this helps solve the problem.

  http://social.answers.Microsoft.com/forums/en-us/w7security/thread/d8250e7a-ee3c-4302-8CA6-9e2a10262feb

  Also refer to:

  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/90c3202c-448B-42b7-ACF7-dab8dba7b000

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Windows Media Player 12 does not update the library when I add an item to the library - please help!

  Windows 7 Windows Media Player 12 does not update the library when I add an item to the library, also, when I delete a file from the folder that contains the media player does not remove it from the library. Can you help me please?

  Hello

  For the question, you can also view the following link for more information:

  You cannot view, add, or delete items in the library of Windows Media Player 11

  The steps are also applicable for Windows Media Player 12.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• the Windows media player 12 does not convert to mp3 when synchronizing files

  I am using windows 7 ultimate x 64. The Windows media player 12 does not convert to mp3 when syncing library on my mp3 device files. But when I use windows vista with windows Media Player 11 it automatically convert. I missed something in windows media 12? or Windows media 12 does not have this feature?

  Thank you.

  Welcome to the Microsoft Answers site!

  Follow these steps and see if it's what you wanted;

  Configure a limit of Bitrate MP3

  1. in Windows Media Player 12, click on the menu to organize, and then click Options and select the tab plug-in.

  2. in the categorylist, select background.

  3. in the backgroundlist, select MGTEK dopisp and click on Properties.

  4. on the Conversiontab, check the MP3 from re - encode that exceed a limit of flowand choose an encoding rate and the rate limit.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.