Windows Media Center Vista don't tune in digital channels of PCI digital tuner tv.

Similar Questions

• How to remove several Photos of Windows Media Center (Vista}? __

  I have over 1000 pictures in my library of Windows Media Center (Vista) and I would like to remove them. Is it possible to do it without having to delete each one separately? I really just reset the center of everything.

   

  I have over 1000 pictures in my library of Windows Media Center (Vista) and I would like to remove them. Is it possible to do it without having to delete each one separately? I really just reset the center of everything.

   

  ===========================================
  The following links may be worth a visit:

  Location of the media database in the library of the Center in Vista (clear the library)
  http://www.ehow.com/how_7402328_location-Center-library-database-Vista.html

  Remove unwanted library in Windows Media Center files
  http://forums.techarena.in/Vista-Help/914500.htm#post4297168

   

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• tv tuner (ntsc/atsc) combo of ViXS pure tv - u 48a 3 not detected by windows media center vista

  I have a setting wrong in Windows Media center. It does not recognize my tv tuner; Pure TV - U 48 VIXS has 3 (NTSC/ATSC) Combo. I'm working on a HP Pavilion Slimline s3120n running Vista Home Premium.

  Hello

  ·         You did changes to the computer before the show?

  Step 1: You can try to install the ViXS Pure TV - U TV Tuner Driver Update and check if it works.

  ViXS Pure TV - U TV Tuner Driver update improves compatibility with some cable TELEVISION systems.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-56966-1&cc=us&LC=en&DLC=en&product=3613143&DLC=en&lang=en

  Step 2: You can uninstall and reinstall the drivers from the link below:

  Pure TV - U 48 ViXS has 3 TV Tuner Driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-50069-1&LC=en&cc=us&DLC=en&product=3385413&OS=2093&lang=en

  Step 3: Please have a read of the article below:

  Error message when you run the installation process of Run first of Windows Media Center in Windows Vista: "Tuner not found".

  http://support.Microsoft.com/kb/934531

  Error message that you receive after you configure Windows Media Center without connecting to the Internet: "No Tuner available".

  http://support.Microsoft.com/kb/929453

  Step 4: Solve problems with watching TV on your computer

  http://windowshelp.Microsoft.com/Windows/en-us/help/d4dce2d3-0388-43b1-8880-7d6823d0eb9f1033.mspx

• Windows Media Center... Tuner?

  Should what type of tuner I buy for the Windows Media Center Debbie

  Hey Debbie,.

  Thanks for the reply.

  You can use your favorite search engine to find an internal TV tuner card that is compatible on your computer and follow the link that I provided to configure the card TV tuner on your computer.

  Reference:

  Windows Vista Compatibility Center

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=TV%20tuner

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Center Vista 64 - pack TV that I need to install to receive the cable QAM channels?

  I am running Windows Media Center on a version under official license of Windows Vista 64 (on a Dell computer).

  
  

  1. where is the download link for the appropriate TV Pack that I need to install in order to receive the cable QAM channels? (All the ones I tried to forbid me to apply the update)

  
  

  Thank you!

  
  

  Hello withtheeye,

  Thanks for posting on the Microsoft answers Forum.

  SP2 is cumlative and includes SP1.

  If you're still having problems with Windows Media Center, I suggest you post at thegreenbutton.com.
  This is a sponsored Microsoft site and only have questions for Windows Media Center.

  They should be better able to help with your questions of WMC.
  Click here for a link to the message of your problem.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Media Center (Vista)

  Hi, I connected the turner K - world PVR - TV 305U with the latest driver for my Vista machine. The windows media center receives no TV signal. Any suggestion?
  Thank you in advance for your help!

  Hello

  Try the following article
  http://support.Microsoft.com/kb/955485

• Windows media center Vista - failure of a component of recording units

  Hi I had a problkems with windows media center.  When I try to start, the following message appears "component registration failure.  I looked at the form post Jan last year.  There is a solution that has worked for the same problem?

  Hello

  Try to check and clean the boot:

  http://support.Microsoft.com/kb/929135

  It will be useful.

• Guide to Windows Media Center (Vista x 64) will not download

  The Windows Media Center TV guide stopped downoading automatically. When I try to load it manually nothing happens at all.  The Guide is now Virgin complelety (each channel does say "No data found") so I can't save this upcoing view shows, nothing.

  I found the answer here:

  http://social.technet.Microsoft.com/forums/en-us/w7itpromedia/thread/e123068e-8ac4-4e37-AF97-691b408582a6

  In particular, follow these steps:

  This happens because the mcupdate.exe process, downloading tv setup data, is not active which should have run automatically during the installation of the tv. So make a shortcut on the desktop with this path "C:\Windows\ehome\mcupdate.exe-manuel - nogc Pei" and run it. Everything will be fine.

• Windows Media Center using only not to Clear QAM channels, at least some of them.

  So check it... I already updated my operating system from Windows Vista to Windows 7 as soon as it became available last year and had been using Windows Media Center on my HP m8330f to record live shows with a digital antenna.  I decided, spotty reception because, as I plug in my TV Tuner directly through my cable (without decoder) and Clear QAM channels this mode of access.  After noticing that my old TV Tuner was missing several channels (not shown 6) I chose to add missing channels, as shown in several forum posts.  I added successfully most of the available channels except the two I wanted most, NBC and ABC.  Since my TV Tuner was quite old (double ViXS ban, card simple tuner), I decided to upgrade to the Hauppauge 2250 encryption that could be a cause for the missing channels... and more, it is a ban on double, double tuner the card.  Alas, the Hauppauge worked in much the same way that its predecessor and the lack of NBC (4.1) and ABC (2.1) are not found... even after attempting to add channels.  All that is visible is a "Service is unavailable" message.

  I am a customer of Time Warner Cable in New York and have had no problem accessing these (Clear QAM) channels on my' computer', the LG 32LH40 thanks its tuner internal.  Moreover, I was able to access these same channels via the same TV Tuner using WinTV v7 and Beyond TV.  This leads me to believe that the problem lies in the Windows Media Center software.

  I am a big fan of Windows Media Center and love how convenient it is (apart from my current dilemma) and still want to use it as my main media look at a software but I'm torn on this issue.  I don't know if you have experienced this problem before, but I am quite stunned, especially since I feel like I've exhausted all channels (which goes as far to add the channels first as a modulation QAM 64 and 256).  Does anyone else have this problem?  Any ideas would be extremely useful.

  Thank you!

  Hi Chris,

  Thanks for your help!  I thought both on the channel number, but I could not find a network ads everywhere about my service area (I had not yet known on that SiliconDust website but I just took a shot and that's exactly what I needed...) (Thank you!) ; or the information that I found were incorrect.  I ended up working all last night.

  After many rescan with WinTV and Beyond TV, I could finally figure what channel were virtual and who were not and add missing channels accordingly.  Remappe MC my 104,2 at 4.2 but not my 104.1 makes my TV as well as WinTV.  Beyond TV didn't display the number of virtual channel while parsing, so I was able to get the numbers of QAM channels how.  He was just working backwards.  However, MC had yet 104.1 (my 4.1 missing such as mentioned in my previous post) in his 'detected chains"(strangely)... so I added it.

  Thank you for this Web site again!

• Windows Media Center is unable to output Dolby Digital/DTS via SPDIF... only stereo PCM is sent

  Hello

  I recently bought a desktop computer HP Pavilion with Vista Home Premium (64 bit) 5150t.  The PC comes with a TV tuner and it works well with Media Center except that it cannot output Dolby Digital (or the other program on the air with JJ or DVDs of films that have a DD) outside of my A / V receiver.

  My Board has Realtek HD Audio and I activated the digital (SPDIF) output in its program.  I put the "Properties" of the digital output in support of * TWO * DTS and Dolby Digital encoding.  When I press the 'Test' button for either format, outside A / V receiver correctly recognizes the format, so the problem is not with my receiver.

  Read forums and online help notes, I strongly suspect that the codec MPEG-2 by default for Windows Media Center is not configured correctly for cross DD or DTS - it somehow always stereo down-Mix before sending to SPDIF.  Could you tell me how to check and change codec setting?  Thank you!

  -Colin

  Hi Chow Ho.
   
  This problem occurs because the DirectShow component and audio decoder MPEG2 in Windows Vista does not correctly support DTS pass through S/PDIF or HDMI.
   
  To work around this problem, click to select the box Audio DTS and Dolby Digital check box in the SPDIF Out properties dialog box or the dialog box Properties of HDMI Out .
   
  You can also check out the link below for more information:
   
  http://support.Microsoft.com/kb/940685
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• Windows Media Center Setup stuck on 'change of Test channel '.

  I just reinstalled Win7 64 Bit.  I'm trying to set up Windows Media Center.  He went through different stages until he arrives to step 'Test channel change.  At this stage, he starts asking me to enter a new 3 digit channel I know my system receives and I do.  He then asks for another and another, each time asking me if the channel changed correctly.  I click on the box that says that this was the case, and then it asks for another channel, then another and another.  It does not stop.  It is a loop and I can't go further and watch TV with my computer in part built to watch TV using WMC (if I look grumpy, I am). I tried from scratch 2 more times with the same result.  WtF?  More...

  Hello

  I suggest you to refer to the attempt of links following the given steps and check if this solves the problem.

  Method 1:

  How to troubleshoot channel changing in MCE 2004

  http://support.Microsoft.com/kb/831438

  Method 2:

  Windows Media Center & how-to help

  http://www.Microsoft.com/windowsxp/mediacenter/

  I hope this helps.

• Windows media center (vista) makes a gurgling noise in speakers when the display is active.

  Buzzing noise disappears in WMC is reduced to the minimum. In addition, no noise present during the use and display of windows media player or any other application. Only when WMC is displayed. All other inputs and outputs (line, microphone, etc.) are set to 0 and muted. Buzzing noise is not loud, but are noticeable between tracks, or when the song is paused. Noise does not increase or decrease with volume changes.

  Hello

  I suggest you follow the steps below.
  Try to install the latest driver for your soundcard for computer/card mother/sound card provider and check if that helps.
   
  For your reference: updating a hardware driver that is not working properly.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  I hope this information is useful.

• The day of the new year, the guide of the media on Windows Media Center (vista) are deleted. And it is still. Advice please?

  Everything works very well, and I turned off the computer several times. Photos, music, etc. work fine, but cannot see TV TNT at all, so can't record programs or see the hours of television programmes. Thank you, Piers

  Hello Piersifa,

  Please see the thread below because there was a problem with the program guide in the United Kingdom and Ireland. It must be corrected. If not, let us know.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/the-electronic-program-guide-EPG-for-Windows-Media/923cf081-0607-497d-889c-6424e8299213

  Check also that all your Windows updates are up-to-date.

  Thank you

  Marilyn

• my laptop came with windows media center vista 64-bit, please help to install the same OS that I don't have installation dvd or I restore partion work.

  I bought the laptop United States & the model no is Pavilion dv4-1120us. Pls help me to restore or to get my system back BONES & also let me know if I can upgrade to windows 7 or not, once I am able to recover my original OS.

  Hi Pavan,

  Please answer these questions so that we can properly diagnose the problem, and to help you, as a result.

  1. the operating system does not work properly? What exactly is the problem you are having?

  2 did you receive any disk partition recovery with the computer?

  I suggest you contact HP support to obtain the recovery partition disk and for aid to restore the computer to its factory settings.

  If you want to re - install Windows Vista, check out this link:

  Installation and reinstallation of Windows Vista
  http://Windows.Microsoft.com/en-in/Windows-Vista/installing-and-reinstalling-Windows-Vista

  If you want to upgrade to Windows 7, see these articles:

  Upgrading to Windows 7
  http://Windows.Microsoft.com/is-is/Windows7/products/upgrade

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-in/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  Please get back to us with the results.

   

  If you have questions about Windows operating systems, help us on this forum. We are happy to help you.

• How can I me EPG of Windows Media Center to retrieve the Info for all channels instead of a few?

  I changed recently upgraded my old outdoor antenna to something much better. As a result, I now get many more channels. Some of these channels are probably close to 100 miles away. EPG WMC not being extracted and live online in the info, I guess that it takes only few of my 'area '. This translates I only find info for strings nearest while some other display Info not available. It is of course annoying and makes doing the impossible registration application.

  I'd like to solve this problem by trying to use an EPG that will pull information from over the air signal. While I searched it online all methods that seem to work for others are for people in Europe, or even for the older versions of XP/Vista of WMC. I have Windows 7 Home.

  Hello

  I will suggest you to post your question in the community of the Windows Experts:

  http://experts.Windows.com/

  I hope that helps!