Windows media center (vista) makes a gurgling noise in speakers when the display is active.

Similar Questions

• How to remove several Photos of Windows Media Center (Vista}? __

  I have over 1000 pictures in my library of Windows Media Center (Vista) and I would like to remove them. Is it possible to do it without having to delete each one separately? I really just reset the center of everything.

   

  I have over 1000 pictures in my library of Windows Media Center (Vista) and I would like to remove them. Is it possible to do it without having to delete each one separately? I really just reset the center of everything.

   

  ===========================================
  The following links may be worth a visit:

  Location of the media database in the library of the Center in Vista (clear the library)
  http://www.ehow.com/how_7402328_location-Center-library-database-Vista.html

  Remove unwanted library in Windows Media Center files
  http://forums.techarena.in/Vista-Help/914500.htm#post4297168

   

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Media Center Vista don't tune in digital channels of PCI digital tuner tv.

  I recently installed a new Hauppauge WinTV HVR-1600 NTSC? ATSC/QAM tuner in my computer. Its a dual core 2.66 mhz 4GB Ram running Windows Vista Home premium with Windows Media Center. The tuner is made to work with Windows Media Center according to its box. He also had his own software cleaner, IE. WinTV, which I also loaded. I have an antenna hanging good input on the tuner card. That same exact antenna wire hooked to a digital TV Gets the following strings... 6.1 and 6.2 - 6.3 - 8.1 - 8.2-8.3-17.1-17.2 - 17.3 - 22.1
  WinTV those gets exactly the same channel list and can display them all. Windows Media Center, after the execution of the installation routine, list the same channels, but do not think that all. Problem channels are 8.2 - 8.3 - 17.1 - 17, 3.  These channels show in the guide as "No Data Available" and when you select them, there is no signal detected. Yet, channel 8.1 and 17.1 gave Guide and discover very well. It is interesting when you go through special antenna Signal: settings: TV: Digital TV the 8.2 problem channels - 8.3 - 17.1 - 17, 3 list all the and are verified with check marks and show full signal strength. I spent time trying to play with the Guides Add announcement & edit channels and add missing channels. Also, I spent time with "Set Up TV signal" several times.
  Any suggestions? Why is the windows media center grateful but not display secondary digital channels, still recognizing and displaying the primary digital channel very well. It can be the signal or the pilots, because MyTV of Hauppage shows them all very well.
  Help?

  Try windows update.  I use this card with media center 7 and had no problem getting all the digital channels.

• Windows Media Center Vista 64 - pack TV that I need to install to receive the cable QAM channels?

  I am running Windows Media Center on a version under official license of Windows Vista 64 (on a Dell computer).

  
  

  1. where is the download link for the appropriate TV Pack that I need to install in order to receive the cable QAM channels? (All the ones I tried to forbid me to apply the update)

  
  

  Thank you!

  
  

  Hello withtheeye,

  Thanks for posting on the Microsoft answers Forum.

  SP2 is cumlative and includes SP1.

  If you're still having problems with Windows Media Center, I suggest you post at thegreenbutton.com.
  This is a sponsored Microsoft site and only have questions for Windows Media Center.

  They should be better able to help with your questions of WMC.
  Click here for a link to the message of your problem.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• tv tuner (ntsc/atsc) combo of ViXS pure tv - u 48a 3 not detected by windows media center vista

  I have a setting wrong in Windows Media center. It does not recognize my tv tuner; Pure TV - U 48 VIXS has 3 (NTSC/ATSC) Combo. I'm working on a HP Pavilion Slimline s3120n running Vista Home Premium.

  Hello

  ·         You did changes to the computer before the show?

  Step 1: You can try to install the ViXS Pure TV - U TV Tuner Driver Update and check if it works.

  ViXS Pure TV - U TV Tuner Driver update improves compatibility with some cable TELEVISION systems.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-56966-1&cc=us&LC=en&DLC=en&product=3613143&DLC=en&lang=en

  Step 2: You can uninstall and reinstall the drivers from the link below:

  Pure TV - U 48 ViXS has 3 TV Tuner Driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-50069-1&LC=en&cc=us&DLC=en&product=3385413&OS=2093&lang=en

  Step 3: Please have a read of the article below:

  Error message when you run the installation process of Run first of Windows Media Center in Windows Vista: "Tuner not found".

  http://support.Microsoft.com/kb/934531

  Error message that you receive after you configure Windows Media Center without connecting to the Internet: "No Tuner available".

  http://support.Microsoft.com/kb/929453

  Step 4: Solve problems with watching TV on your computer

  http://windowshelp.Microsoft.com/Windows/en-us/help/d4dce2d3-0388-43b1-8880-7d6823d0eb9f1033.mspx

• Guide to Windows Media Center (Vista x 64) will not download

  The Windows Media Center TV guide stopped downoading automatically. When I try to load it manually nothing happens at all.  The Guide is now Virgin complelety (each channel does say "No data found") so I can't save this upcoing view shows, nothing.

  I found the answer here:

  http://social.technet.Microsoft.com/forums/en-us/w7itpromedia/thread/e123068e-8ac4-4e37-AF97-691b408582a6

  In particular, follow these steps:

  This happens because the mcupdate.exe process, downloading tv setup data, is not active which should have run automatically during the installation of the tv. So make a shortcut on the desktop with this path "C:\Windows\ehome\mcupdate.exe-manuel - nogc Pei" and run it. Everything will be fine.

• Windows Media Center (Vista)

  Hi, I connected the turner K - world PVR - TV 305U with the latest driver for my Vista machine. The windows media center receives no TV signal. Any suggestion?
  Thank you in advance for your help!

  Hello

  Try the following article
  http://support.Microsoft.com/kb/955485

• Windows media center Vista - failure of a component of recording units

  Hi I had a problkems with windows media center.  When I try to start, the following message appears "component registration failure.  I looked at the form post Jan last year.  There is a solution that has worked for the same problem?

  Hello

  Try to check and clean the boot:

  http://support.Microsoft.com/kb/929135

  It will be useful.

• Receive the error "Windows Media Center Receiver Service stopped working and was closed" after the video card replaced

  I have a HP computer with Windows Vista Home Premium (32-bit) Service Pack 2.  He has a VISX PureTV tuner card and already had an NVidia GeForce 8400 graphics card.  This Setup has worked well for 2.5 years until what the graphics card died last week.  It has been replaced with an ATI Radeon HD3450 and both all Windows updates have made current.  Since that time, the TV tuner did not work.

  When you sign in to an account, it gives the error message "Windows Media Center Receiver Service stopped working and was closed".  I can use Media Center to watch the recorded video before, but if I try to watch live TV he hangs up and close Media Center.  If I try to configure the TV connection in Media Center it tells me that there is no tuner card.

  I looked at the map and see no problem and I tried it back in place.  He has the most up to date drivers (so does the new Radeon graphics btw).  I tried "Uninstall" in the Manager of devices and then put it back, but it was not good.

  "Windows Media Center Receiver Service Stopped Working and was closed" I tried all the fixes I've seen this error.

  I tried all the things I saw here and elsewhere related to this issue.  I did a "clean boot" with all non-Windows services and the disabled startup process.  He always did the same thing and gave the same mistakes.  It seems to be linked to a Windows service, and I hesitate to begin deactivation to track down.

  I ran 'sfc' in mode 'cmd' and he found no problem and none of the files to be fixed or could not fix.

  In the list of services, I changed the login for "Windows Media Center Receiver Service" to "Local System account", Local Service, Network Service and individual accounts, but no permits.

  I'm afraid I'm at the point of having to reload the Vista, but I don't know how to do this and want to avoid at all costs.  I don't have the recovery disks and software.  Is this enough?  Can I reinstall from the recovery disks without wiping everything aft of the configuratiion with which it was delivered?  I guess personal files will be OK (although I don't know this for sure), but I'm afraid I'll have to reinstall other applications, my family has developed over time and perhaps lose the media protected by DRM licenses.

  Someone has encountered anything like this or have any suggestions?

  Well, I finally stumbled into the solution.  It was caused by a conflict with another application.

  A few weeks before the card failure I had installed a program called video capture Replay Video Capture that I had bought a few months ago and never used.  However, at this time where everything including the TV tuner and Media Center worked well that's why I associate the problem with this software.  The problem comes after the system is rebooted the first time after installation.  In my case, it has not been rebooted until a few weeks later as part of the recovery of the fault of the graphics card.  Suddenly, the TV tuner did not work and I get the error messages mentioned in this title of the thread.

  I was at the end of my rope with this and was just to clean your system to do a reformat and reinstallation.  I uninstalled the Replay Videa Capture program to move it to another computer, and when you restart the computer I noticed that the error message disappeared.  Of course I went to the Media Center and could set up my TV tuner card and watch television.

  Looking for some info on this conflict, I found the following. (http://forum.applian.com//showthread.php?847-Conflicts-between-RVC-and-XP-Media-Center-OS&s=c0aec9897b51d550c47b919e73e59bfc)  It is difficult to say who is at fault in the present.  I'm sure that Microsoft accuses Applian for the encoder to mpeg (mcm2ve.ax) used in Replay Video Capture, while Applian says that the problem is a Windows process (ehrec.exe) that works all the time, hogging the tuner on the system device.  According to Applian other products similar to theirs have this conflict as well due to the process of Windows.

  Fortunately, there is a solution in this case.  Applian has released a new version of Replay Video Capture (version 4.2) that uses a different mpeg encoder and eliminates the problem.  Given the surprising lack of info about it on the Microsoft Web site, I wonder how many other people with this unresolved issue dealing with the same thing as me.  If you're like me and you don't usually need to reboot your PC for a few weeks at a time, you may never know to associate the problem with the application.  What a waste countless hours trying to diagnose, and most disconcerting, that's what I was about to go through a reformat and reinstall because of this.

  Thought I'd post here my problem resolution in the hope that it might help someone else.

• Windows media center on starting indicates there is a problem with the failure of a component of recording on the radio and the video how can I solve this problem

  Failure of a component of recording
  Some of the files needed to play radio are missing or corrupt. Registration of the media center components may have failed.

  The above message is displayed whenever I put Media Center on and try to watch television. The guide lists are also not downloading.
  And im having trouble with the tuner.
  Tuner not found
  the tuner is defective or not installed.

  someone help?

  Hello hillsiderWH,

  Seems that your windows installation is missing most important files, I suggest you boot to the top with your windows media center installation CD and run repair on the windows installation. This will replace any missing files and I hope that your media center up and running. If this isn't the case, it could be a problem in the registry.

  -Alex

• The day of the new year, the guide of the media on Windows Media Center (vista) are deleted. And it is still. Advice please?

  Everything works very well, and I turned off the computer several times. Photos, music, etc. work fine, but cannot see TV TNT at all, so can't record programs or see the hours of television programmes. Thank you, Piers

  Hello Piersifa,

  Please see the thread below because there was a problem with the program guide in the United Kingdom and Ireland. It must be corrected. If not, let us know.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/the-electronic-program-guide-EPG-for-Windows-Media/923cf081-0607-497d-889c-6424e8299213

  Check also that all your Windows updates are up-to-date.

  Thank you

  Marilyn

• my laptop came with windows media center vista 64-bit, please help to install the same OS that I don't have installation dvd or I restore partion work.

  I bought the laptop United States & the model no is Pavilion dv4-1120us. Pls help me to restore or to get my system back BONES & also let me know if I can upgrade to windows 7 or not, once I am able to recover my original OS.

  Hi Pavan,

  Please answer these questions so that we can properly diagnose the problem, and to help you, as a result.

  1. the operating system does not work properly? What exactly is the problem you are having?

  2 did you receive any disk partition recovery with the computer?

  I suggest you contact HP support to obtain the recovery partition disk and for aid to restore the computer to its factory settings.

  If you want to re - install Windows Vista, check out this link:

  Installation and reinstallation of Windows Vista
  http://Windows.Microsoft.com/en-in/Windows-Vista/installing-and-reinstalling-Windows-Vista

  If you want to upgrade to Windows 7, see these articles:

  Upgrading to Windows 7
  http://Windows.Microsoft.com/is-is/Windows7/products/upgrade

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-in/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  Please get back to us with the results.

   

  If you have questions about Windows operating systems, help us on this forum. We are happy to help you.

• the dell xps 410 with windows media center 2005 makes it be able to run minecraft?

  I have the dell XPS 410 and I can't get it able to run mine craft due to a warning on my driver is possible to run it?

  You can probably run, but you will need to provide the specific error message, without paraphrase, as well as the following system information. For more detailed advice.

  I imagine that the warning suggests that you update the driver for your video card.

  The Minecraft system requirements: http://www.minecraftsystemrequirements.com/

  CanYouRunIt: http://www.systemrequirementslab.com/cyri

  Go here and enter your service tag to find the latest Dell driver--> http://www.dell.com/support/home/us/en/19?c=us&l=en&s=dhs

  For more help here, provide your Information system specifications:

  Start > run > msinfo32.exe > OK
  Edition > select all, then edit > copy
  Paste (CTRL + V) in your answer
  Click + next to 'Components', select 'View' then
  Edition > select all, then edit > copy
  Paste (CTRL + V) in your answer

• lack of Windows Media Center in Vista HP

  I am running Vista Home Premium.
  My OS is Windows Media Center. He started giving me problems with the cursor if poster not, so I stopped using it for some time several months ago. Now, I can't find it anywhere on my system.
  I need to know if I can get it back, or if I can redownload it. I can't find anywhere on the Microsoft site to download.
  I don't have Windows media player, but it's not the same.

  Hello ddanhrt64b,

  Thanks for posting on the Microsoft answers Forum.

  You can check and see if you have selected Windows Media Center in programs and features.

  1. open the control panel configuration/programs and features.
  2. click on "Turn Windows features on or off" in the left pane.
  3. expand "Multimedia functions", check if you have selected 'Windows Media Center'.
  4. open "Turn Windows features on or off" again. Activate the 'Windows Media Player' and 'Windows Media Center' features. Turn it back on.
  5. launch Windows Media Center, initialize the program.

  Then go to start, all programs and see if Windows Media Center is now displayed.

  I hope this helps.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to move to the Windows 7 version of Windows Media Center on Windows Vista?

  Original title: window Media Center upgrade

  I have a Windows Vista PC running Media Center version 6.0.600 window. I have another PC with OS 7, which has Media Center of the window version 6.1.7600. Two media centres are sufficiently different, especially about the Internet streaming, to where I would like to upgrade the Vista machine with the version of Windows 7 Media Center (6.1.7600). Is it possible and if yes, where I would be able to download the new version? I know that it is upgraded to OS 7 is an option that would automatically give me the best version of Windows Media Center, but I can't really afford the upgrade at this time. Any suggestions will be greatly appreciated as I am tired of searching the Web for answers to what I thought, it was a simple question.

  Thank you!

  Hi elad58,

  Unfortunately, Windows 7 version of Windows Media Center is not available for download in any of the official sites Microsoft. It is not possible to upgrade to the updated release of Windows Media Center.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]