Windows media encoder

Similar Questions

• Webcam on Satellite A200 does not work with Windows Media Encoder

  Material: TOSHIBA Satellite A200 (1GH) with built-in Chicony webcam.

  PROBLEM:
  When I use the software Chicony webcam - it works allright (video recorded normally).
  BUT: when I have Chicony software from Windows Media Encoder (preinstalled with Vista) - when I try to select the webcam as input device - and closing the error reported is "the device is not ready".

  This error also repeated if I select for driver webcam Microsoft instead of native driver Chicony webcam.

  Hello

  Download the latest driver Chicony and the software for the Toshiba page and install it.
  Don t forget to remove the old version.

  In addition, if you get the error message like webcam is used by another application or "device is not ready you must start the msconfig and should turn off and turn on webcam chicony and process service.»

  Good bye

• Cannot download the update from microsoft > update security for windows media encoding for windows xp and windows server 2003 kb2447961

  I am running HP pavillion A1130n desktop computer > problem > I can not IN stall Microsoft Update > update security for windows media 9 for windows xp and windows server 2003 kb2447961 of coding... .e send me a response message. > * E-mail address is removed from the privacy *.

  Hello
  
  1. don't you encounter any error message during the installation of this update?
  2 is this problem limited to this particular update?
   
  I ask to download the update manually and then install it.
  Here is the download link:
  A security update for Windows Media Encoder 9 Series for Windows XP and Windows Server 2003 (KB2447961)
  http://www.microsoft.com/downloads/en/details.aspx?familyid=EF0ADA2C-965F-438F-A1D3-BD45DB8460C1&displaylang=en.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Update security for Windows Media Encoder 9 Series for Windows Vista... Error details: Code 6B9__

  I tried several times to install the security update for Windows Media Encoder 9 Series for Windows Vista. It downloaded, but everytime I try to install it about half way through the installation it is said that it was cancelled and I got 6 b 9 error Code.  I can download and install other updates without any problem.

  Hi Ms. Morrill,

  Welcome to Microsoft Windows Vista Forums.

  You can use the tool it Fix to reset Windows Update components using the link below:

  http://support.Microsoft.com/kb/971058/en-us

  After this step, try to install the update and if you get an error and then try to install mode safe

  To enter in safe mode follow the steps below:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the click the button Start the arrow next to the button lock , and then restart.

  2. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  For more information follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  You can try to install the update mode without failure and the link is the following:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=99beebc4-553a-46f8-8245-e3d932306c93&displaylang=en

  Hope this information is useful.

  Suresh G

  Support Microsoft Answers

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to connect more than 18 players for windows media Encoder 9.

  Hi, I try to use Windows Media Encoder 9 to 24 players conect to the streaming signal, the problem I have is that I did that 18 connections at the time, I have not been able to get 24 connections.

  Also when I disconnect a player which is the signal, other players who did get the signal before gets it.

  I already configured the registry to allow 50 connections. I use Win XP SP3. What can I do? Thank you.

  Hi Johnny Gomez.

  The question you posted would be better suited in Microsoft Expression Encoder Forums. I suggest you to send your query in Microsoft Expression Encoder forum for better support.

  Microsoft Expression Encoder Forums
  

• How can I stop the windows media Encoder 9 block programs

  whenever I try to install studio video u-lead on acer Paolo, to halfway through the encoder windows media 9 said a planned program could not be executed - why is - this?

  FWIW... Uninstall Windows Media Encoder and obtaining
  Microsoft Expression Encoder 4 can be something to consider.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5c3c5f97-678c-4C99-A7FC-f84f320c626f&displaylang=enExpression Encoder training videos
  http://expression.Microsoft.com/en-us/cc197144.aspx

• Y at - it a fix for leak of VRAM in Windows Desktop? (Windows media Encoder and photo IE10 Viewer are the root of the problem)

  It seems that Windows media Encoder and photo IE10 Viewer are the root of the problem, and it is about the whole MS Platform in desktop for what anyone associated media.  As easy as it is to use another browser or image viewer I find I like the windows photo viewer ability to preview multiple images and IE10 and 11 are more now then fix everything that exists.

  The issue is having to restart or log out and back in just pass leak VRAM that can go up to 1400 MB and count. What said GPU - Z and ESTR.  The memory of the system seems to be in check most of the time.  Get off my GPU memory Windows.

  I mean leak even with the left running only windows desktop and essential tasks to keep it that way.  I have games that will never saturate 1.5 GB of video memory on my setup. Darn Far Cry 3 does not work.   I'm ranting, namely. At the same time being a little in-depth play play of this recurring problem.

  In case the VP and general manager or anyone else to Microsoft is approaching through it all here is the short version:

  Video memory leak in Windows 8. How can I fix this in the Windows desktop. Is there a way to erase the GPU cache and reduce the use VRAM 160MO? is there a fix? is there a value from regedit?

  Hey Marv,

  Thanks for posting your query in Microsoft Community Forum.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=W8

  Hope this information is useful.

• Issue of Windows Media Encoder

  Hello

  We use Windows Media 9 on Windows XP services to broadcast to our website, so we created the MMS: / / link on our website, the question is: if five people visit this site, there are five broadcast or show? We want to reduce the traffic. Thank you!

  Hi léiw,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows XP IT Pro category

• Series of 32-bit update Windows Media Encoder 9 of security for Windows Vista is not installed!

  Hello

  Above my security update will not be installed.  It starts to install at the beginning but then it crashes just for hours.  He tried several times but no luck.  I am running Windows Vista and I'm updating all my other updates.

  Any suggestions?

  Try to download and install it manually by downloading on your desktop and install it. Insert the number to get the good update and choose the one corresponding to your version of Vista: http://www.microsoft.com/downloads/en/default.aspx.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Also read and execute the steps ofhttp://support.microsoft.com/kb/971058.

  If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• why I can't install the update for windows media encoder 9 series for windows vista (KB2447961) it takes forever and im getting no where

  start the computer from the update before its judgment.

  It gets to a point where it still doesn't make something, it

  continues forever. I try to shut down or stop it buy using the

  It will not stop the Task Manager. IM at unlplug power cord, take

  the battery off to stop him. Othere then this method, it stays on

  do nothing.

  Hello

  1. is KB2447961 the only update that gets failed?

  2. you receive an error message when you try to install the update?

  Follow the steps below and check if that helps.

  Method 1: Follow the steps in the link given below and check for the issue.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2: Alternatively, you can restart the computer in clean boot to check if any third-party application is causing the problem.

  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Note: Make sure to restart the computer to normal startup followed step 7 in the link.

  Method 3: Manually download and install updates from the link provided below.

  http://www.Microsoft.com/download/en/details.aspx?ID=11265

• Qosmio G30-163: encoder Windows media does not recognize video devices

  I can't get the Windows media encoder to recognize my video camera connected to the S-video (Qosmio G30-163) port.

  I have a similar problem with Web conferencing pro application Marratech (it crashes after 15-20 seconds if I try to use it-during the time the application is inactive - in configuration I see the photo/video test).

  If I use InterVideo® WinDVD Creator 2 Platinum software packaged for video capture it works fine.

  Hello

  In my opinion there would be something wrong with the compatibility of the MCE and s-video. Have you tried to run the MCE updates?
  If the s-video connection works with InterVideo WinDVD Creator, then I guess there is no hardware malfunction (s-video port).

  How about the video and the port? Have you checked if it works?
  This port allows you to import video data from analog video camera.
  I recommend you this option

• Windows Media 9 Series encoder

  Downloaded windows media encoder 9 series on the ms site

  When you try to live it will not pick up the broadcast ip address.

  Look at me because am different, I laugh at coz you your all the same

  Maybe this article will help you.  It seems as if implementation is a bit complicated, especially if you use a router - but it provides some good detailed information that might help your solve the installation problem (that's what I suspect rather than a problem with the {then the correct configuration of others} software or internet connection router or Vista. http://www.jakeludington.com/ask_jake/20051015_how_to_stream_a_live_audio_file.html.

  I hope this helps.

  Good lucck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• WINDOWS MEDIA 9 ON WINDOWS VISTA, NO NOISE, SNDVOL ENCODER. EXE COULD NOT BE STARTED WHEN I CLICK ON THE MIXER. Help!

  right... I just got a new computer, the vista Home premium 64-bit, and I use windows media encoder 9 series to stream live radio broadcasts... everything installs ok, but when I click mixer to sort my sound levels it gives me this error:

  "the mixer"sndvol32.exe"application could not be started. the system cannot find the specified file (0 x 80070002).

  I searched in google and microsoft, Web sites, I found a fix for vista, but when I try to install that he says theres a problem with this windows installer...

  I tried to run in compatibility mode for xp sp2

  Any help would be appreciated

  Hi DJ_KingSize,

  This problem occurs because some legacy applications use files or components that were developed prior to Windows Vista. The names of these audio components may be different in Windows Vista. If the calling application uses the hard-coded file names, the new files and components could not be found.

  To resolve this problem, use one of the following methods to change the audio settings for a device.

  Method 1: Use the order Volume of Windows

  To use the Volume of Windows command to change the audio settings for a device, follow these steps:

  1. right click on the speaker in the notification area icon and then click recording devices or reading.

  2. double-click on the device for which you want to adjust the settings. For example, double-click on Microphone.

  3. click on the levels tab.

  4. move the cursor upwards or downwards to set the desired volume level, and then click OK

  Method 2: Use the control panel

  For control panel allows you to change the audio settings for a device, follow these steps:

  1. Click Start, click Control Panel, click hardware and sound and then click sound.

  2. click on the playback or recording.

  3. double-click on the device for which you want to adjust the settings. For example, double-click on Microphone.

  4. click on the levels tab.

  5. move the cursor upwards or downwards to set the desired volume level, and then click OK.

  For more information, see the link below:

  You may receive an error message when you run an application that uses the recording feature or audio playback in Windows Vista

  http://support.Microsoft.com/kb/930095

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• IP camera encoder to Microsoft Expression Encoder or Windows Media

  I want a way to get my planet IP camera feed to Microsoft Expression Encoder or Windows Media Encoder. Is there a way to do this. I would like to release my IP camera feed on asp.net Web site. Is there a different approach. Can someone help me. Thanks in advance!

  Hi Nirnay,

  Problems with Microsoft Expression Encoder is supported in the MSDN Forums. Send the query in the link.
  http://social.msdn.Microsoft.com/forums/expression/en-us/home?Forum=encoder

  For more information, see the article.

  http://blogs.msdn.com/b/expressionencoder/

  Hope this information helps.

• issue tear the player 11 Windows Media - tracks have the end of the previous song.

  I seem to have bad ripper CD - when I select all the tracks and then click Start rip. They rip ok and have the correct names etc. However when I play the tracks a few of them have a minutes from the end of the previous track before then playing the song. Its done this to many CD and CD - r, to move I have Ripper each track on a CD individually which is really painful. How can I fix it, thank you.

  Hi HLouise,

  What is in my mind is the check-out settings. Make sure you only select the option to 5 seconds between songs.

  Alternatively, you can try to reload the encoder from the link below.

  You can download the Windows Media Encoder from here:
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=5691ba02-e496-465a-bba9-b2f1182cdf24&displaylang=en

  Other that that, I suggest you post this question in the Windows Media Player forum.

  Hope this helps

  Eddie B.