Windows Media Player crashes when you open a file
The player program freezes when I try to open a video file from Windows Media Player.
However, when opening a video file (right click > open with > Windows Media Player) the video plays normally.
A month ago, has worked these two methods.
Windows XP SP3 with all updates
Windows Media Player 11
If her videos only in a specific folder, you could try to reconnect all, delete the old folder and renaming this new or possibly leaving the new folder with a different name.
It can also be a good idea to run the disk check to check there is no problem with the drive: http://support.microsoft.com/kb/315265
Tags: Windows
Similar Questions
-
Windows media player crashes when you start cd play
When I insert a CD in windows media player, screen freezes when cd starts playing and the sound is chopy.
Hi RonnieDean,
- Did you the latest changes on the computer?
- Are you experiencing a similar problem with a CD you are trying to play using Windows media player?
- You have security software installed on the computer?
Method 1
See the link below and run the fixit tool available, check if it helps.
Solve the problems of Windows Media Player video and other media or library
http://support.Microsoft.com/mats/windows_media_player_diagnostic/
Method 2
If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you configure the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
- Click Start , and then click run.
- Type msconfig , and then click OK.
The System Configuration utility dialog box appears. - Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
- When you are prompted, click restart to restart the computer.
-
Why photoshop cs4 crash when you open a file? (Mac OS 10.6.8)
Why photoshop cs4 crash when you open a file? (Mac OS 10.6.8) I rebuilt of prefs and reinstalled Photoshop without any positive result. I can create a new file, but is unable to 'place' anything because both accidents.
Try to run the software update from Apple once more. An update of security published on 1 February was wobbly.
http://tidbits.com/article/12768
http://www.Google.com/search?q=security+update+2012-001+Rosetta
-
Just install Windows 64 bit. New installation. Whenever I try to open Windows Media Player or Media Center, I get a message that says that "Windows Media Player has stopped working. Windows can check online for a solution to the problem.
Problem event name: APPCRASH
Application name: wmplayer.exe
Application version: 12.0.7600.16667
Application timestamp: 4c7dc5a1
Fault Module name: KERNELBASE.dll
Fault Module Version: 6.1.7600.16385
Timestamp of Module error: 4a5bdbdf
Exception code: c06d007e
Exception offset: 0000b 727
OS version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information 1: 0a9e
More information 2: 0a9e372d3b4ad19135b953a78882e789
Additional information 3: 0a9e
Additional information 4: 0a9e372d3b4ad19135b953a78882e789I clicked on "check online for a solution", but nothing came.
I tried to install an earlier version, but was not allowed to do.
How can I solve this problem.
Hi Nick91606,
KERNELBASE.dll is a file system of the operating system.
Method 1
I suggest that you save the file on your computer and check if Windows media player works.
(a) click the Start button.
(b) in the search box, type command prompt.
(c) in the list of results, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(d) in the type command regsvr32 kernelbase.dll line press ENTER.
(e) close the command prompt
Method 2
If the previous step fails then I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.
The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.
For more information please visit the link below.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows Media Player error when you try to burn a CD-80004002
Error code 80004002
I have problems with cd burning and I get an error code 80004002... What should I do?... I already cleaned the cd and they type of cd is that I used all the time. Also, when I went to windows media player I clicked web help and they said to choose a speed slower recording, but after that I clicked on burn and more options... I didn't know where to go from there... I don't see the burning rate box that they are at.
Hello1. what version of Windows Media Player is installed on your Windows Xp computer?Error 80004002/C00D10DA of Windows Media Player:
http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5230&ID=C00D10DA&ContextId=30&OriginalID=80004002
If you use Windows Media Player 9 or 10 refer to the article below to make the changes.
Method 1.
To select a slower burn speed:
a. in Windows Media Player, click Options in the Tools menu.
b. click the devices tab, and then double-click the name of the CD - R or CD - RW drive that you use.
c. click on the recording tab and select a write speed that is slower or is the slowest available speed.
d. click OK and then click OK.Reference:
http://support.Microsoft.com/kb/306319
Method 2.
If you have Windows Media Player 11 refer to the article below to slow down the burning speed.
Windows Media Player C00D10DA/80004002 error
http://Windows.Microsoft.com/en-us/Windows7/C00D10DA
I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Windows Media Player error when you try to play a CD: C00D1197
I played the CD/DVD on my laptop (windows vista) with no problems. I popped in a DVD and it plays very well. When I jumped into a music CD, (the one I've played a dozen times) I "Error Message C00D1197." When I went to my computer and clicked on the CD/DVD player - he said that he had NO CD/DVD read and spit my CD. When I put my rear DVD - no problems. Put in a CD, a CD, I get an error message. That's happened? I did something different. I wonder if the new window updates caused the problem. Unfortunately, I am not that computer savvy to be messing around on my laptop to see. Can you help me? PLEASSSSEEEE. Thank you! : o).
Hello
These should help:
WMP - C00D1197
http://Windows.Microsoft.com/en-us/Windows7/C00D1197Windows Media Player Error Message help
http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D1197&ContextId=71&OriginalID=80070002Also check this KB which could apply to other versions of WMP
http://support.Microsoft.com/kb/834483I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Windows Media Player error when you try to read the file: error downloading codec
Yesterday, I got no sound and video, today I have sound but no video. What is happening with this?
I updated my drivers and now the video does not work. I use Windows Media Player c. 9.00.00.4510. When I click on read the file, in the black bar at the bottom ready it flashes very fast "error downloading codec". Before I updated the drivers, I got the video with no sound. Where this codec disappeared to? How can I get that back?
I have updates for the 9 Series Player and I'm happy with it. If I move up to 10 or 11, codecs and drivers will work with it automatically or will I have the same problem?
OS: Windows XP sp3
Thanks for any help, Cdee.
Hi CDEKV,
Check to see if the following is useful.
Method 1: Follow the steps in the below article mentioned to see if it helps.
How to Download Codecs automatically in Windows Media for Windows XP player
Method 2: Install the Codec Installation Package to check the issue.
Download details: Codec Installation Package
Method 3: Upgrade to the latest version of Media Player.
-
Windows Media Player crashes when playing songs and the screen turns white.
Original title: using Windows Media Player 12.
I have a computer dell laptop old 1 year, win 7 64, ie11, when I got this laptop I ripped my CD music and played very well, now the song would begin and about 10 seconds into the song, that the player will freeze, no longer plays, after the song stops to wmp screen would go blank. I can close and restart the song or try another song and get the same thing, it would freeze again. How can I get wmp to play a full frost free? What can I do to fix this? Julie
Hi Julie, try to reset the WMP 12. Follow the instructions step by step, as described in the article.
-
Premiere Pro sometimes crashes when you open a file Explorer window
Hello
I've had this problem for a while now but have never been able to find a solution. Basically if I use something within Premiere Pro that opens a Windows Explorer dialog box (for example, when you choose a custom LUT), the program sometimes goes a little crazy.
The dialog boxes is not pop up and the program becomes unclickable. And when you try to click on what, whether it gives it its particular of Windows. That occurs when you use a program and a dialog box has popped up and you try to click outside the dialog box.
In the past, if I tried to end task and then cancelled, the program will open. However, with the last update things became different. It unlock again, but the program does funny things as it won't save. It does not update the video window when you rub. Etc., basically it becomes unusable and you will need to complete the task without being able to save your work.
All Adobe autour staff member?
Hi Inazuma,
Rarely. This is a user to user forum, mainly. Contact 'Adobe' here.
Thank you
Kevin
-
Photoshop CC 2015.5 crashes when you open any file
Hello
Just upgraded to Photoshop 2015.5 Photoshop CC 2015 CC
It crashes when you try to open any file.
The following comes from Windows 10 64-bit Event Viewer Application Error log
Description
Application of vulnerabilities path: C:\Program Files\Adobe\Adobe Photoshop CC 2015.5\Photoshop.exe
Signature of the problem
Problem event name: APPCRASH
Application name: Photoshop.exe
Application version: 17.0.0.88
Application timestamp: 57513821
Fault Module name: intelocl64.dll
Fault Module Version: 3.0.1.10891
Timestamp of Module error: 556d7f9f
Exception code: c0000005
Exception offset: 00000000000433a 3
OS version: 10.0.10586.2.0.0.768.101
Locale ID: 2057
Additional information 1: 7f0f
More information 2: 7f0f023ec13afd94b8f4a68b34f13f91
3 more information: 40b 8
Additional information 4: 40b8a6a888449932af338cad2242ec3a
Additional information about the problem
Bucket ID: ef7a946e119a19e360e855b018cd190d (120502590482)
10 Windows Event Viewer Application logs
120502590482
4
APPCRASH
Not available
0
Photoshop.exe
17.0.0.88
57513821
intelocl64.dll
3.0.1.10891
556d7f9f
c0000005
a 00000000000433, 3
1
a0f880a4-a37d-46f6-9a41-b3d380217c10
0
ef7a946e119a19e360e855b018cd190d
All the drivers are up to date.
Updated creative cloud.
Signed in & cloud Creative
Installed and uninstalled Photoshop
Any help appreciated
Mike Regan
Hi Mike,.
The cause of the accident is intelocl64.dll which is the file to Intel graphics card drivers.
Make sure that your graphics card drivers are updated.
If this does not help, follow these steps:
- Quit Photoshop
- Press windows and keys r to open the run window
- Type w and press enter
- Open Roaming\Adobe\Adobe Photoshop CC2015.5\Adobe Photoshop CC2015.5 settings
- Move the sniffer file on desktop and relaunch Photoshop
- Check that it works fine now
Concerning
Claes
-
Illustrator crashes when you open any file
Adobe Illustrator crashes everytime I try to open or create any document. I tested the file formats are AI (CC) adobe PDF and JPG. I tried to reset my computer as well. I want to uninstallthe program, but my creative cloud application refuses to load, so I have no way to re - install Illustrator
Sam,
Try the list (you can keep 6) until you can load the cloud).
The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.
If possible / there is, you must record a current work first, of course.
(1) close Illy and open again.
(2) restart the computer (you can make up at least 5 times);
(3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);
4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:
https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html
5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);
Even worse, you can:
(6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.
-
PS CS3 crashes when you open any file.
I'm on CS3 and I'm having the problem of not being able to open a file, such as the PS will crash every time before the opening of the window to select a file. I took another job and did everything he said but what I mention below on a TWAIN...
(another post that said answered but isn't)
I can't PS to open a file and did all the corrective items list. I don't think that TWAIN is a problem, but it's the only thing that I don't know how to look...
I need PS at work and have lost a customer with this problem. Adobe won't support it and told me to buy CS5. I have so little money, or I have already...
I need this program to make money. It worked one day and not the next. I remember an Adobe update past in Camera RAW I think it was. I had postponed the update until I did with a project. After I did I installed it before starting a new project next week. When I went to start that I could not open a file and have been stuck since...
Any new idea will save my life and Affairs, if they fix it!
3 complete uninstalls and reinstalls did today. I was told that everything reset and make me run, but it didn't...
Thanks for listening and help...
K
10.6 to date. but he did before the updates in the same way...
To remove manually CS3 applications go here http://kb2.adobe.com/cps/400/kb400607.html> and follow the instructions to the letter.
-
Photoshop CS3 crashes when you open any file
I'm having a problem with Photoshop CS3. The application starts successfully in its own, but as soon as I open a file any I immediately get the following message:
Photoshop.exe - Application error
The instruction at "0x7c91b21" referenced memory at "0 x 000000010. The memory could not be "written".
Then, the application closes.
Other applications Adobe, in the Suite work perfectly well. I tried to uninstall/reinstall the software and I still get the same error.
I tried the number of Support from Adobe, but they will not help because it's CS3. Would like to have 4 or 5, but it is not possible for me right now.
I also tried a quick search on google but answers/solution seemed to be everywhere, while I tried in vain a few.
Any help would be greatly appreciated.
Yes. but not too much information here.
Chris has already written about changing the default printer.
Go in Control Panel of Windows (I don't see what operating system you have). Search for devices and printers or printers. If the printer you are printing to is configured as default printer change that to a different printer as MS XPS Document Writer and make this defect.
Close it and see if that fixes the problem. This is a real problem for a lot of questions.
All you have to do when you're ready to print from PS is to choose which printer to use when the print window opens.
-
Dreamweaver CC on a Mac crashes when you open the file
When I open Dreamweaver and go to file > open... I get a spinning ball and Dreamweaver is unresponsive. This happens when I do anything that involves access to my file on my local disk. Even change a path in the preferences.
A ran a repair permissions in disk with disk utility and it fixed the problem.
-
Seems random. At the opening of television recorded on WMC, am able to see a few episodes. There are now two shows with an episode every which crash WMC as soon as the cursor is near him. Other shows, episodes of play very well. Cannot delete shows because it crashes before able to do anything, then it opens again. Have WIndows 7. It happened a few times in the last 6 months. Error message is that WMC has stopped working and will restart.
Thank you. I was able to send videos in the trash. I then restored the videos and they work fine.
Maybe you are looking for
-
I use to have the measurit add and have reinstalled now. It comes in the bar downstairs. I have switch and it works. I've lived the Addon tools and it is installed. How do I get this appears so I can use this excellent addon. Thank you
-
Satellite 4000CDS has no BIOS!
Hello!My laptop is a Satellite 4000CDS and I wanted to install windows again. But when I put the CD and restart the computer, nothing happens. There is even no screen that says I have to press a key to enter the BIOS, so I can't set the boot priority
-
DesignJet 111: DesignJet 111 - printing problems - no printing after upgrading to Windows 10
Several problems to the upgrade of WINDOWS 7 for WIN 10. The HP DesignJet is 'offline' and can't figure out how to change the setting of "online." The definition "print directly to the printer" is not. Yellow flashing on the printer dashboard - magen
-
How to stop the sidebar from popping up when I drag my mouse to the left?
I've updated OS for my Mac at El Capitan this week, and since then, when I use safari mode full screen and the mouse touches the left side of the screen, the sidebar is displayed. It is very annoying, and I don't know how to remove it. Does anyone kn
-
change table 1 d of data for a row to a column
Hi all This can be a very simple question, but im trying to take two 1 d of data tables, put them in a table and this table to be 1 column so it looks neat in a table. Thank you