Windows Media Player error when you try to play a CD: C00D1197

Similar Questions

• Windows Media Player error when you try to burn a CD-80004002

  Error code 80004002

  I have problems with cd burning and I get an error code 80004002... What should I do?... I already cleaned the cd and they type of cd is that I used all the time. Also, when I went to windows media player I clicked web help and they said to choose a speed slower recording, but after that I clicked on burn and more options... I didn't know where to go from there... I don't see the burning rate box that they are at.

  Hello
   
   
  1. what version of Windows Media Player is installed on your Windows Xp computer?
   
  Error 80004002/C00D10DA of Windows Media Player:
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5230&ID=C00D10DA&ContextId=30&OriginalID=80004002
  
  If you use Windows Media Player 9 or 10 refer to the article below to make the changes.
  Method 1.
  To select a slower burn speed:
  a. in Windows Media Player, click Options in the Tools menu.
  b. click the devices tab, and then double-click the name of the CD - R or CD - RW drive that you use.
  c. click on the recording tab and select a write speed that is slower or is the slowest available speed.
  d. click OK and then click OK.
  Reference:
  http://support.Microsoft.com/kb/306319
  
  Method 2.
  If you have Windows Media Player 11 refer to the article below to slow down the burning speed.
  Windows Media Player C00D10DA/80004002 error
  http://Windows.Microsoft.com/en-us/Windows7/C00D10DA
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Media Player error when you try to read the file: error downloading codec

  Yesterday, I got no sound and video, today I have sound but no video.  What is happening with this?

  I updated my drivers and now the video does not work.  I use Windows Media Player c. 9.00.00.4510.  When I click on read the file, in the black bar at the bottom ready it flashes very fast "error downloading codec".  Before I updated the drivers, I got the video with no sound.  Where this codec disappeared to?   How can I get that back?

  I have updates for the 9 Series Player and I'm happy with it.  If I move up to 10 or 11, codecs and drivers will work with it automatically or will I have the same problem?

  OS: Windows XP sp3

  Thanks for any help, Cdee.

  Hi CDEKV,

  Check to see if the following is useful.

  Method 1: Follow the steps in the below article mentioned to see if it helps.

  How to Download Codecs automatically in Windows Media for Windows XP player

  Method 2: Install the Codec Installation Package to check the issue.

  Download details: Codec Installation Package

  Method 3: Upgrade to the latest version of Media Player.

  Download Windows Media Player - Microsoft Windows

• Windows Media Player Vista when I try to play some videos, including some film my daughter loaded on a usb key that I encounter the error code cood11d1

  I presume that I have windows media version 11 of the drive and when I try to play some videos, including some film my daughter loaded on a usb key that I encounter the error code cood11d1. My attempts appear so far have confirmed that I have the latest updates available for my drive, and after you run the fix it program tell me no error or problems when identified. Appreciate any help that can be offered

  Hi at Rob Merci for the quick reply, but before that I followed one of your suggestions I confirm the error message I get when trying to play some movies is certainly cood11d1 so your thoughts before going further with thank you bob.

  ==========================================

  Followign links may be worth a visit:

  (935336) Windows Media Player 11 cannot
  read content protected by DRM on Windows Vista
  http://support.Microsoft.com/kb/935336

  (925705) when you try to use Windows Media
  Player 11 to play a digital rights management
  (DRM) - protected media file media cannot play
  http://support.Microsoft.com/kb/925705

  The security component upgrade
  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  Windows Media Player: Mini WMP FAQ
  http://zachd.com/PSS/PSS.html
  (scroll down a bit to the 3rd entry that said: Vista only)

  Windows Media Player error c00d11b1 resolved
  http://Strom.WordPress.com/2007/04/06/Windows-Media-Player-error-C00D11B1-solved/
  (it's a long discussion on the error 0XC00D11B1)

• Windows media player crashes when you start cd play

  When I insert a CD in windows media player, screen freezes when cd starts playing and the sound is chopy.

  Hi RonnieDean,

  1. Did you the latest changes on the computer?
  2. Are you experiencing a similar problem with a CD you are trying to play using Windows media player?
  3. You have security software installed on the computer?

  Method 1

  See the link below and run the fixit tool available, check if it helps.

  Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Windows Media Player closes when I try to play an AVI of my camera. V9 or 11 show the same error.

  "Windows Media Player has encountered a problem and needs to close.  We are sorry for the inconvenience.

  If you were in the middle of something, the information you work may be lost.

  For more information about this error, click here...

  results click 'here '...

  Error signature

  AppName: wmplayer.exe

  AppVer ModName 9.0.0.4503: ntdll.dll [same defect with v11.]

  5.1.2600.6055 ModVer

  Offset: 00011780

  clicking Close does nothing for five or ten seconds.

  Help?

  Thank you!

  Hi Alan,
  no need to change hardware, this error message is specifically geared towards the software.
  Try this:
  1. download a version of the software and the place so that you know what file it is.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player
  2 uninstall the current version of Windows Media Player.
  http://support.Microsoft.com/kb/934372
  3. restart in "safe" mode
  http://support.Microsoft.com/kb/315222
  4 install Windows Media Player.
  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme

  Hope this helps,
  B Eddie

• Windows Media Center crashes when you try to play certain episodes recorded from various shows.

  Seems random.  At the opening of television recorded on WMC, am able to see a few episodes.  There are now two shows with an episode every which crash WMC as soon as the cursor is near him.  Other shows, episodes of play very well.  Cannot delete shows because it crashes before able to do anything, then it opens again.  Have WIndows 7.  It happened a few times in the last 6 months.  Error message is that WMC has stopped working and will restart.

  Thank you.  I was able to send videos in the trash.  I then restored the videos and they work fine.

• Windows mail gives error when you try to send 0x800ccc0e

  Windows mail gives error when you try to send 0x800ccc0e

  Check if you can access your e-mail via webmail.  If it works fine and that you always have problems in WinMail, then delete your account e-mail, then compact and repair the database (www.oehelp.com/WMUtil/) and then add your account to e-mail back again.  Often, this solves these problems.

  Steve

• Error when you try to play the game: memory access violation

  memory access violation

  I have redownloaded a game that has been previously loaded on my computer, now I get this error when you try to play the game "Memory Access Violation".

  Your sound card that is more than adequate.
  If the game was previously installed and worked fine then maybe it is not been completely uninstalled.
  I suggest you uninstall the game, look in the registry for any left over entries that can refer to the game.

  Then restart and reinstall the game.

  Alternatively, you can try to install in compatibility mode. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know if that helps.

  Marilyn

• Error when you try to play multimedia files using Windows Media Player C00D11B1

  Error C00D11B1

  A few days ago, that I could not windows to start at all it would just keep rebooting over and over when I tried to turn it on. After about one day it started working again fine except that now I have no sound at all. I get the message of theC00D11B1 of windows media player and I followed using web, but nothing works. All my audio devices are activated and started but when I run the test for his failure and I hear nothing. The speakers were working fine before the crash bit I had. Any help is appreciated.

  A few days ago, that I could not windows to start at all it would just keep rebooting over and over when I tried to turn it on. After about one day it started working again fine except that now I have no sound at all. I get the message of theC00D11B1 of windows media player and I followed using web, but nothing works. All my audio devices are activated and started but when I run the test for his failure and I hear nothing. The speakers were working fine before the crash bit I had. Any help is appreciated.

  =======================================
  No guarantee... but the following links may be worth a visit:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Media Player: Mini WMP FAQ
  http://zachd.com/PSS/PSS.html
  (scroll down a bit to the 3rd entry that said: Vista only)

  (935336) Windows Media Player 11 cannot
  read content protected by DRM on Windows Vista
  http://support.Microsoft.com/kb/935336

  (925705) when you try to use Windows Media
  Player 11 to play a digital rights management
  (DRM) - protected media file media cannot play
  http://support.Microsoft.com/kb/925705

  The security component upgrade
  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  Windows Media Player error c00d11b1 resolved
  http://Strom.WordPress.com/2007/04/06/Windows-Media-Player-error-C00D11B1-solved/
  (it's a long discussion on the error 0XC00D11B1)

  Another possible solution:

  Q: error code cood11b1

  A: Try the following...
  Open Windows Media Player and go...
  Tools / Options / tab player... Uncheck the...
  Connect to internet / apply / OK.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Windows Media Player help

  I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error.  I can't find a solution.  Any Advisor.  Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Hi Rains27,
   
  1. were you able to play the same DVD sooner?
  2. must arrive with a particular DVD or all of them?
  3. do you have a DVD decoder installed on your computer?
  4. you use starter edition of windows 7?
  5. What is the resolution on your computer?
  6. have you installed a codec on your computer?
  If you have installed a codec on your computer the I suggest you to uninstall the codec.
   
  Method 1:
  Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
   
  Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
   
  Troubleshooting, click View all, and then click Windows Media Player DVD.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
   
  Method 2:
  
  
  
  Play a cd or DVD in windows Media player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
  
  Method 3:
  
  Try to reduce the hardware acceleration again and check if it makes a difference.
   
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click on advanced settings, troubleshoot tab and then click on change settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
  d. click OK and then click Restart now.

  For more information, see this link: thanks and regards:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• How can I reload Windows Media Player? I get a script error when you try to play anything

  Suddenly the Windows media player gives me a server error when I try to play anything on this subject.  It worked fine last week.

  I have the same problem as Ronald with the same results. Media Player doesn't "start" or start when I select it.

• Error when you try to play .wmv files: Windows Media Player has encountered a problem while playing the file. For any additional help, click Help on the Web

  Will not play WMV video files

  I'm having a problem to play wmv. video files.  I have windows vista.  I can play music in Windows Media Player, but can not play any video, that is sent to me by e-mail.  WMP crashes and give a message saying that Windows Media Player has encountered a problem while playing the file. For any additional help, click Help on the Web.  I click web help and receive nothing.  The drivers are up to date.  Why I can't play videos? Thank you

  Hello Henry Michael,.

  Please relay the e-mail program you use.  You can also try to save the file directly on your local computer, and then check if the file is being read correctly. If there has been any recent codec package installation, you can also try to temporarily uninstall the codec package and then check out the question.

  Thank you

• No Media Player - codec errors when you try to play a DVD

  Media Player will not play the DVD.  It is a DVD.  It keeps saying that I need to lower the resolution?  Really, this cannot be more obtuse.  In addition, please do not answer with the codec information, because these are TS DVD standard, not divx, avi files, etc..  If you do not know the difference, please answer.  I doubt you can answer the question, but let ' see

  Hello

  1. What is the exact error message that the OP is.
  2. Can you play the discs or videos using media even

  Method 1: Let's run the game and DVD Burning, convenience store and check if the problem persists.

  (a) click on start and then Control Panel.

  (b) in the search box, type troubleshooting, and then click Troubleshooting.

  (c) click View all, and then click on reading and burning CDs, DVDs and Blu - ray disc and follow the instructions.

  Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2: Try to reduce hardware acceleration.

  (a) screen resolution open by clicking the Start button, tap Control Panel configuration, and then, under appearance and personalization, click on adjust the screen resolution.

  (b) click Advancedsettings, the Troubleshooting tab, and then click on change settings.

  (c) move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.

  (d) click OK, and then click Restart now

  Reference:

  Windows Media Player Error Message help

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.6000.6336&ID=C00D116A&ContextId=83&OriginalID=C00D116A

  It may be useful

• C00D11BA of error when you try to play music in the Windows XP machine.

  Original title: DRIVER SOUND ACTIVATION READ FILES.

  file audio/sound play.code error C00D11BA of fixation

  Hi spangladesh,

  ·        You did it all change hardware or software on your machine before this problem?

  ·        Which media player you are using?

  ·        What is the file format of the music files?

  ·        You receive this error code for all music files or any file in particular?

  If you use Windows Media Player, you can follow this link & check if the problem persists.

  Windows Media Player Error Message help

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.