Windows Media Player - no devices appear when you try to media sharing

Similar Questions

• Windows update 80070246 error code appears when you try to update

  Above the week windows latest update update fails and displays the error code 80070246

  Any suggestions how I can fix this problem in Vista.

  Thank you.

  Twiggo

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  0 X 80070246 - ERROR_ILLEGAL_CHARACTER
  An invalid character was encountered.

  Stop error when you try to download updates from Windows Update on a computer that is running Windows Vista: "0 x 80070246.
  http://support.Microsoft.com/kb/942968

• Windows XP - 0x66A error code appears when you try to install Microsoft. NET Framework1.1 Service Pack 1

  Running XP SP3 tries to install Microsoft.NET Framework 1.1 Service Pack 1 update it still not and I get the error 0x66A code. Could not find an explanation anywhere for this error code.

  "enginemanses" wrote in message News: ec6aa35b-f44e-4514-8f56-25c025c76ebd...

  Running XP SP3 tries to install Microsoft.NET Framework 1.1 Service Pack 1 update it still not and I get the error 0x66A code. Could not find an explanation anywhere for this error code.

  http://support.Microsoft.com/kb/923100 can help - even if the error code is different.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• error code 0 x 80246007 appears when you try to install updates and the windows store purchases.

  error code 0 x 80246007 appears when you try to install updates and the windows store purchases.

  any help appreciated

  Original title: error code 0 x 80246007

  Hello

  Please try the patches for Windows Updates:
  http://www.kapilarya.com/fix-error-80070570-Windows-Update-encountered-an-unknown-error-some-updates-were-not-installed
  And for store related issues, use Troubleshooting Windows App tool:
  http://www.kapilarya.com/download-Microsoft-accounts-Windows-apps-troubleshooters-to-fix-casual-issues-for-Windows-8
  Hope this helps, good luck :)

• I get the following message appears when you try to open Photoshop... "Could not initialize Photoshop because an of.file - unexpected end has been detected. Help! You can use my Photoshop!

  I get the following message appears when you try to open Photoshop... "Could not initialize Photoshop because an of.file - unexpected end has been detected. Help! You can use my Photoshop!

  Hi romyb,

  End of file unexpected refer and let us know if this helps.

  Kind regards

  Assani

• I'm currently developing apps on my creative cloud. My account has two subscriptions and I am trying to use one of them, but after that download the message of "no subscription found" apps will appear when you try to license. How can I access the apps? I

  I'm currently developing apps on my creative cloud. My account has two subscriptions and I am trying to use one of them, but after that download the message of "no subscription found" apps will appear when you try to license. How can I access the apps? I use a Mac

  Hello

  Please see connect and disconnect activate Cloud Creative applications

  Advanced solutions for connection with Adobe Creative Cloud and Creative Suite applications errors

  Concerning

• I downloaded the trial version of Lightroom on my MacBook running El Capitan. I get the following message appears when you try to import photos: your update of Lightroom 6.3.0 drive to which you import images is low

  I get the following message appears when you try to import photos: your update of Lightroom 6.3.0 drive to which you import images space is low. Delete files or empty the trash to make at least 250 MB available before continuing. ??? What it means? I'm not using a disc, a have a lot of space on my Mac.

  Of course, you use a disk. When you import, you place a copy of your photos on your computer's hard drive (or external hard drive). The meaning of the error message seems very clear. What part of this do you not understand?

• Following message appears when you try to download and install clouds.

  Hello

  Following message appears when you try to download and install clouds.

  Thank you in advance.

  Arch

  Exit code: 6

  Please see specific errors below for troubleshooting. For example, the ERROR:

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 2 error (s)

  -Payload: Package redistributable Microsoft Visual C++ 2012 (x 64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20}.

  ERROR: third charge useful Installer vcredist_x64.exe failed with exit code:-2147024546

  ERROR: Cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 64). Please try to install by double-clicking the executable file to "C:\Users\Arch\AppData\Local\Temp\{DCBAB470-A90D-4085-8330-55214AF4FB75}\Photoshop_16_LS2 0_win64\Adobe CC 2015\payloads\Microsoft VC 2012 Redist (x 64) \vcredist_x64.exe", or download and install the 2012 Microsoft Visual C++ Redistributable Package last (x 64) Microsoft Web site - www.microsoft.com

  Hello

  Please follow errors ' Exit Code: 6 "," Exit Code: 7 "|"» CS5, CS5.5

  Hope that helps!

  Kind regards

  Sheena

• Error message appears when you try to connect to World of Warcraft. The message indicates that the System32\icm32.dll is not designed to run on windows or contains an error

  Original title: icm32.dll error message of World of Warcraft

  Error message appears when I try to connect to World of Warcraft.  The message indicates that the System32\icm32.dll is not designed to run on windows or contains an error.  This pop-up has an "OK" button that you can click, but the message appears again and again.  I am running Windows 7 Pro 64-bit and never had this problem before and I don't know how this file was damaged

  System Type x 64-based PC
  Processor Intel Core i5 - 2500K CPU @ 3.30 GHz, 3301 Mhz, 4 Lossnay, 4 logical processors
  BIOS Version/Date American Megatrends Inc. 0805, 10/11/2011

  What should I do to solve this problem.  And any idea on what may have caused the problem.

  Thank you

  Hello

  1. What is the exact full error you get when you try to play the game?

  2 have you made changes on the computer before this problem?

  Method 1:

  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem persists.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  I suggest you to check the question in the clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 3:

  I also suggest that you scan your computer with the Microsoft Safety Scanner. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Note: All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.

  If the problem persists, contact the game manufacturer for assistance.

• Blue error screen "stop0x0000003E" appears when you try to install windows vista (R) service pack 2 - that's what I've shown in after I try to install the update? is this a problem or not?

  The problem I have is listed on the feald above, but there are once more my question: blue screen "stop0x0000003E" error when you try to install the service pack of windows vista (R) 2.

  Free unlimited installation and compatibility support is available for Windows Vista until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error: "Windows could not complete the format" when you try to write to blank DVDs

  I get this error when you try to copy files to a blank DVD.  I am trying to drag and drop files into the dvd player and after a small roar, the dvd ram drive stops and the error message.  Then the drive no longer recognizes blank dvd inside.  I am running Vista 32 bit and my dvd ram is a matshita dvd - ram uj880as ata.  I tried to switch to the microsoft 'FixIt' site, but the problem is not resolved.  I think that the report mentioned that the reader could recognize not writable or something to that extent.  The player can play DVDs fine, however.  Is there a solution to this problem by replacing the dvd ram drive?

  Hello

  Have you tried to close all programs and then insert the disc to see what is happening? Try a slower
  speed or mastered format. Have you added any burning new software lately - these tend to compete
  for resources and can interfere with each other.

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  ====================================

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you can write on the outside edge.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• "An error occurred" appears when you try to burn a CD

  After ordering the Windows Media Player 11 to START to BURN, a red circle with an X appears immediately to the bottom of the list of the songs selected for burning (in the title, in the middle of the main column).  CD were burned on this same burner, but I did not burn in about three months. Any suggestions?

  Hello

  ·        Do you have any third party burners installed on the system?

  ·        What is the exact error you get when you try to burn the CD?

  ·        You are able to use the CD drive for playback of the disc?

  I suggest you to try with another CD and check if you're able to burn or not.

  I suggest you run the fix it is present in the article below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Apart from that, I suggest you follow the steps mentioned in the article below.

  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP

  http://support.Microsoft.com/kb/324129

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP SP3: Access denied error when you try to change the beginning upward in MS CONFIG. Director of applications but I am the administrator.

  original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator

  I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?

  You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here

• Code 66A Windows Update encountered an unknown error when you try to download

  I get this response when you try to download this update to Vista.

  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2446708)

  See Diana / of Andre.Ziegler or respond to a post above about the error code:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/52538332-710e-4C29-BD5B-d08db7555bb3 >

  04/14 / 1108:36: 39 pm

• Windows 7: error 5 (access denied) when you try to start the Volume Shadow Copy (VSS) service

  System: Win 7 Ultimate x 64 on a HP Pavilion DV6. My account is the user account only suitable on the laptop and an administrator account.

  When you try to do a system restore, it came with an error that the Volume Shadow Copy Service did not work, even if this error code is not relevant for the purposes of this question later, I managed to run the system restore in SafeMode to an old restore point...

  When you try to turn on VSS, I checked services.msc (which I ran as administrator) and VSS was off and on the manual. I tried clicking on start, the following error message came:

  "Windows didn't start the Volume shadow copy on the Local computer service."
  Error 5: access is denied. »

  I then switched to automatic and tried again, same error. I tried since everything I can possibly think (including the definition of back and forth between manual & auto then trying the solutions below) to get the service starts, nothing helps. The solutions tried so far:

  -net start vss high cmd - returns the same error (error 5 access is denied)
  -high vssvc.exe cmd - same
  -changed the full control permissions for me, the group admin and NETWORK SERVICE (that I had to add) to the System32 folder and vssvc.exe but no change
  -changed the permissions to full control for myself, admin and NETWORK SERVICE group (who even once, I must add) for VSS in regedit (open as administrator) still nothing
  -even tried to restart explorer.exe a high cmd and a task manager high and again made the permissions - still nothing.

  The only thing I haven't done is run a sfc scan, but tbh, I doubt that will fix anything. It also seems that VSS has been turned off for a while, as my last restore point was about 3 months ago and I installed things since.

  Any suggestions/ideas would be appreciated, because I'm going nuts with that now! Thank you!

  The Volume Shadow Copy Service must not be on auto-start.

  According to the site TechNet Microsoft VSS THAT was introduced with Windows XP SP1 and since that time it has always installed as manual start since he does not need to be started automatically and it works day and night to do nothing.  Some places say different times when VSS has been introduced, but be sure that it was a long time ago.

  A popular site to see how Windows Services should / could be put in place is here:

  http://www.blackviper.com/service-configurations/

  If you've read about VSS on Microsoft TechNet, it says:

  

  https://TechNet.Microsoft.com/en-us/library/hh125927 (v = ws.10) .aspx

  So do you think the MS TechNet site is fake and that each installation of Windows since XP has a badly installed VSS Service?  If that were the case all Windows systems in the world would be in trouble.

  On an unafflicted system if you open the services applet and observe the VSS Service, it should look like this:

  

  So if you start a backup operation or even create a Restore Point, go back to the Service applet and press F5 to refresh you'll see that the VSS Service changed its status to start:

  

  Once the operation is complete the VSS Service will stop itself (it may take a while).

  That's how it is supposed to work.

  We should certainly be able to affect the automatic VSS Service and you should be able to start, but you shouldn't need to.  People who say that "solved their problem" forgets to mention the days/weeks to try things that lead to get their system of work.  There is no way of knowing which of the dozens of things that they could have tried really solved the problem.

  You say that the system restore worked in Mode safe (but not a normal startup) and if it is true that means usually something to load in a normal trunk causing a problem and that something is usually an antivirus/antimalware application that is 'protect' your system against the changes.  When you start mode safe these things are usually not loaded this is why sometimes your system restore mode without failure.

  Contributors known for these programs are Norton, McAfee, Avast, Avira, Kaspersky and probably others.

  So what antivirus/antimalware programs you are running and have checked their support pages for known problems with backup/restore system restore?

  Norton has even a page about these issues:

  https://support.Norton.com/SP/en/us/home/current/solutions/v51118464_EndUserProfile_en_us

  Even McAfee told their product to uninstall completely before doing a system restore:

  "Intel Security recommends that you remove McAfee security products before to proceed with an upgrade of the operating system or the Microsoft System Restore and then re-install your McAfee product when the update/restore is complete. "
  

  So I assumed that whatever your AV program happens to be could be part of the issue here - but we don't know what it is.

  We know error 5 is a permissions/access denied error type, but you shouldn't make adjustments to get VSS to start if something is wrong.  If as you have tried adjustments have been necessary every Windows system in the world should also make these adjustments and coming is not past.

  Of course, now, your system might be more affected since you've been changing permissions on the things trying to VSS to start when there is probably not a problem with VSS in the first place, so who knows what condition are in now.

  You could start by uninstalling what your AV software (most manufacturers have a special program for that) and by eliminating third-party applications that are known to interfere.  You can always reinstall them again later, no?