Windows Media Player stops playing and will not rip

Similar Questions

• Windows media player Vista Home Basic will not play Internet radio?

  I recently downloaded REALPLAYER and accidental set as my default player. When I went to use WMP to listen to the radio on the internet I discovered this. I have reset WMP as my default player, but now it will not play internet radio. I click on a radio station and I am asked to download a shortcut file to listen to the station.

  Any idea?

  I have windows Vista Home Basic 32-bit

  Thanks for your help.

  Hello

  You can view these methods:
  Method 1:
  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/
  Method 2:
  You can try to re - register wmp.dll file.
  Type the following command in the command prompt administrator mode and press ENTER.
  
  regsvr32 wmp.dll
  Press ENTER after typing the command. If you get a message like wmp.dll registered correctly, and then click OK in this message box. Close the command prompt and re - open Windows Media Player and check.

• While trying to read, a video, I get a message 'Windows Media Player stopped working' and cannot continue

  How to fix windows media player... Read message videos... "Windows media player has stopped working", so I can't play the video. I can play music, however.

  Michael

  Hi Michaelgdr,

  1. the problem occurs with all videos?
  2. What is the file format of you play it?

  I suggest you to reduce hardware acceleration for windows media and (if supported) graphics card player

  I suggest you to make Windows Media Player as a default player.

  You can also change the hardware acceleration and check.

  Try to reduce (or turn off) video hardware acceleration by doing the following

  a. open Screen Resolution by clicking the Start button, click Control Panel, and then, under appearance and personalization, clicking
  Setting screen resolution.

  b. click Advanced settings, click the Troubleshooting tab and then click change settings.

  Note that some video card drivers do not allow allows you to change the settings.

  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.

• Why my windows media player stops playing a video clip when I drag her to a second monitor?

  I have tried to read a video on a second monitor by using the operation drag and drop method. But every time I do the video stops working (even if the sound isn't yet). Is there a download that will allow me to play the video?

  Video takes a lot of memory in the computer to manage, sound does not need as much memory and that's why you will always hear.  Did you check to see that you still have a lot of space memory hard drive?  What are the specifications of your computer compared to what you need to run Media?  Before drag you it to another monitor, it works ok?  You may need to increase the speed of your computer, if not live without doing this operation.

• Windows Media Player 12 "Play To" does not work

  I am trying to use the "Play To" feature between two Windows 7 computers.  Both behave the same way.  When I select the "Play To" feature at the top right of the window, the "Play To" dialog box appears very briefly.  In fact, so briefly that I just see the outline - no text inside (I don't see "play to" in the title area).  I have all the media streaming features turned on and I can 'see' libraries (and can view all photos/videos, etc) - I just can't "play to." I tried two computers in both directions.  I don't get the error messages and I don't see anything in the log files.  Note that, when I try to use the "Play To" feature in Windows Explorer, I get the following error "as it is impossible to find the resource specified in the image file type."

  Hi cdbma,

   

  If you want to leave a feedback on the feature, then please visit Windows 7 comments

  
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: Windows Media Player cannot play the file. The player can not support the Codec that was used to compress the file, MP3 downloads will not play

  Original title: MP3 downloads don't play no not on WMP

  My Windows Media Player recently stopped playing downloads from Amazon. I've never had this problem before. I installed VLC Player, has not worked... off the WMP in the Windows app, restarted, turned on the back and restarted... did not help. I get the message "Windows Media Player cannot play the file. The player may not support the Codec used to compress the file. This is for multiple downloads, so I don't think they would be all corrupted files.

  Hello
   
  Have you done any software or changes to the material on the computer before this problem?
   
  You mentioned that the files do not play on a third-party player as well. I suggest you to check if the files are corrupt.
   
  Method 1:

  How to Download Codecs automatically in Windows Media for Windows XP player

  http://support.Microsoft.com/kb/291818
   
  Method 2:

  Resolution of the problems of reading in the Windows Media Player for Windows XP

  http://support.Microsoft.com/kb/306317

  Information on the types of media files that supports Windows Media Player

  http://support.Microsoft.com/kb/316992
   
  In addition, run the fixit from the link:
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/
   
  Hope the information is useful.

• I went to play a DVD on my computer this evening and received this msg: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.

  DVD decoder not installed?

  I went to play a DVD on my computer this evening and received this msg: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.
  A few weeks ago, I played DVD on my computer. I would like to know what is happening. Any ideas/suggestions?

  I tried to play one of the same DVDs I played before... same message.  Nothing to my knowledge has been removed from my computer and I'm the only one with access... "very confused.

  Thanks if anyone can help.

  Yes, and if you install the utility on your system, you'll see all decoders.

  The utility will also tell you if a decoder is compatible or not.

  Using Media Player version 10 or 11?

  the utility tells me I have no decoder... the only thing I can think is that if I actually deleted it... I rarely remove anything because I do not add a lot... but it is possible a few weeks ago, I have to get rid of some things (I'm quite cautious because I'm not an expert).   It is the Media Player version 11, I was trying to use... but I rebooted now 10 to see if there was something to update related that mess.

  because I used the VLC Player successfully, I have not yet tried Windows Media Player (since WMP reloading and load the codec pack)

  So great to have the entry of a person who knows what he's doing.  Thanks again. I will try the Windows Media Player later and see if I have his use of return.

  Have a great day!

• Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

  Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

  Hello

  Try resetting the default associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  ====================================

  Also follow these steps:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------

  Then, if necessary:

  Have you recently installed another player?

  Reset your associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  ---------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html

  I hope this helps.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Media Player 11 lists and plays each song twice

  Why Windows Media Player 11 list and play each song twice without being in a loop? Help me

  I have problems with windows media player 11 playing each son twice and it is very annoying.  How can I solve this problem?

  Sara: I suggest that you try to reset the media library. Note firstly reset the library will make you lose all play counts and ratings too. Then, follow these steps:

  -Restart the PC.
  -Click Start, type services.msc in the search field and press ENTER. In Services, locate the Windows Media Player Network Sharing Service. If its status is started, double-click on the service and click on stop.
  -Click Start, type %LOCALAPPDATA%\Microsoft in the search field and press ENTER. This folder opens in Windows Explorer.
  -In this folder, delete the folder Media Player. If you do not see the folder, then it is probably hidden. Set Explorer to view the hidden files and folders and show protected system files.
  -Launch WMP, your library will have been reset and will be rebuilt. Check if the problem persists.

• Error Windows Media Player cannot play the CD. The disc may be dirty or damaged. Turn on error correction and then try on Vista 64-bit

  Original title: Windows Media Player, playing only half of the first song on cd and rest jump

  I have Vista 64 bit on my computer, I have WMP 11.  When I put the CD in the player it loads correctly, gives me the titles and others and will start playing the first song.  To halfway through it stops and for the rest of the CD, he crosses and put an X next to them then this error message is displayed:

  Windows Media Player cannot play the CD. The disc may be dirty or damaged. Turn on error correction and then try again.

  I tried to turn on error correction, but it didn't work, it was not available in the reading section.  How can I get the cd to play?  I tried a lot of different cd and they all do the same thing.  I have the same problem in Itunes as well.

  Hi Brian21777,

  (1) since when are you facing this problem?

  (2) remember to make changes to the computer?

  Method 1: You can see the steps by Karena R, in the link below that relates to a similar question:
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/8e35a984-D302-48c9-bf3c-a687d1546cd2

  Method 2: Download and install all available Windows Update
  Install Windows updates

  Method 3: Make sure that your DVD drivers are up to date; see the link below
  Manually update the drivers

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD Windows media player cannot play this dvd because it is not possible to activate the ANALOG on the output display copy protection try to install a driver available for your video card

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  =======================================
  What version of Windows are you using?

  The free VLC Media Player may be worth a try...

  It will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

  And the following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• Unable to play video file error: Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer

  Original title: Windows Media Player shows that the new codecs are required

  Original title: query codec and Media Player re

  Have used windows media player for many years on my dell. Usually to see the videos from Sony handycam. Just downloaded wmediaplayer and recent videos from Camcorder will not open one of the videos.

  The following message is displayed "Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer. »

  As I have not changed anything helpful suggestions please.

  concerning

  The winemaker

  Hello

  1. What is the format of the video file?

  2. what operating system is installed on the computer?

  Method 1: Run the troubleshooter in Windows Media Player on Windows 7 settings:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: You can check if the file format of the music files are supported by Windows media player using the link below.

  Information on the types of media files that supports Windows Media Player

  Note: If you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Method 3: In addition, you can also download & install the necessary codec to play the files.

  For more information, see: Codecs: frequently asked questions

  (For Windows Vista)

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• Cannot read DVDs, error: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer

  DVD playback problem started today.  SE message: Windows Media Player cannot play the DVD because no compatible DVD decoder is installed on your computer ot.  I have not had this problem before.

  Hi RosemaryHanna,

  Thanks for posting in the Microsoft community!

  I understand that you are unable to read the DVD. I will try to help you with this question.

  (1) did you make any changes before the show?

  (2) the video works fine when playing any video recorded or audio files on the computer?

  Method 1: Solve the video issues in Windows Media Player and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/?WA=wsignin1.0

  Method 2: You can see the steps mentioned in the article below

  Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista

  http://support.Microsoft.com/kb/306331

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Windows media player11.error windows media player cannot play dittos theplayer might not support the file type or might not support the codec used to compress the file

  • y at - it software that could help me.which will work with my Media Player to convert almost any format or find the good codec.so I can watch my videos, I have downloaded on my documents.there need some software out there that would do this work.so my media player 11 play my videos.

  Hi Bbdunford,

  O what is the file format?

  O if it works well before?

  Today, there are hundreds of audio and video codecs in use. Some were created by Microsoft, but the vast majority of codecs have been created by other companies, organizations or individuals. By default, the Windows operating system and the player includes a number of the most popular codecs, such as MP3, Windows Media Audio and Windows Media Video.

  There might be times, however, when you want to read the content that is compressed with a codec that does not include Windows or the default player. In many cases, you can download the necessary codec on the web for free or for a fee. And, in some cases, the player can automatically use the codecs installed by other reading programs and the creation of digital media on your computer.

  You may encounter this error message for the following reasons:

  1. the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  2 - the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  You can try the steps and check if it makes a difference.

  1. in order to determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On the file tab, look at the sections of video codec and Audio codec.

  2 download and install Codecs by clicking on the PLAYER tab and check. To connect to the Internet and automatically download Codecs player

  3. configure the protocol settings

  On the Tools menu, click Options, and then click the Network tab.

  In the Streaming protocols area, select all the check boxes Protocol.

  When connecting to a server running Windows Media Services, Windows Media Player tries to use all selected protocols.

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  http://Windows.Microsoft.com/en-US/Windows/downloads/wmplugins+.

  Previous post: the result.

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• In the error message is Vista "Windows Media Player cannot play the file, might not support the codec used to compress the file.

  It worked very well what place please?

  * original title - Window Media Player cannot drive cannot read the file the player could does not load the file or may not support or does not support the codec used to compress the fichier.*

  Hello

  1. what changes have been made to your computer before the problem?
  2. the problem occurs on a particular file?
  3. What is the format of the file you want to play in Windows Media Player?

  You may encounter this error message for the following reasons:

  (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Windows media player will play only the files and videos only if it supports this type of file.

  Please see the bottom of the article that gives you information on the types of media files that supports Windows Media Player.

  http://support.Microsoft.com/kb/316992

  If the files are not supported by Windows media player, then you will need to use a few players from third party that supports this file format.

  WARNING OF THIRD PARTY SOFTWARE

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the link below for more information on the codec.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions