Windows media player will not go back. How can I solve this problem?

Similar Questions

• My CD player does not work. How can I solve this problem?

  My CD player does not work.  How can I locate and repair?

  Hi Rose Embrey,.

  1 when was the last time it was working fine?

  2. what happens when you try to access the CD drive?

  3. did you of recent changes on the computer?

  See the link below and run them the fixit tool available, check if it works.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I installed the Turbo tax, but it gave me an error "C:\windows\system32\regvrs32" is not found. How can I solve this problem.

  Windows XP how edition

  read this link, it may be useful

  http://support.Microsoft.com/kb/q249873

  also try to run the installer of TurboTax in administrator mode.

  How old is your turbo tax program, it is perhaps not compatible with windows 7.

  If it helps, please mark my post as helpful.

  Thanks and good luck.

• My Emerson monitor will not remain oh how can I solve this problem, one has had this problem before? I hope I can get some answers.

  I bought this DHMI SRS monioter to my displeaser and he will not stay as my second monitor, sorry I made this purchase and I hope as som one there will be answers to the poroblem.

  Contact support to Emerson.

• My windows search service is not running. How can I solve this problem?

  My tab search in Microsoft Outlook does not work. When I researched a problem (solution), the response was: Windows Search service not running. I need to get in my box of reception and elements for specific emails and its taking me huge amounts of time to find the emails without the search sent tab.

  Go to Services and activate the service. Or,

  Click on the Forums at the top of this page, go to the forums of office, ask in the Outlook forum.

• When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1. What is the full error message do you get?

  2. are - that you be able to access or connect to the Internet via wired?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1:
  Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2: If the problem persists, try to follow the steps from the link.

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  How can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Please follow these recommended steps and post if you still experience the problem.

• Hi, I have a problem with the import of the 4000 SJCAM MOV files. MOV files are in formats supported for Adobe Premiere elements 11. But if I am importing of MOV file, only audio part is imported, part video is not imported. How can I solve this problem?

  Hi, I have a problem with the import of the 4000 SJCAM MOV files. MOV files are in formats supported for Adobe Premiere elements 11. But if I am importing of MOV file, only audio part is imported, part video is not imported. How can I solve this problem?

  haben

  Looking at the specs of your camera (SJCam 4000), we already know what video compression your camera uses. It is H.264.

  A H.264.mov file should be accompanied by a first elements 11. On what computer operating system is your first items 11 running?

  You have the latest version of QuickTime installed on your computer? And, you use QuickTime and first of 11 elements of a

  Account user with administrative privileges? Please go to Premiere elements 11 publish + share/computer/QuickTime to confirm that you will find

  presets it to the choice of QuickTime, it.

  What are the properties of these files H.264.mov - is it 1080 p (1920 x 1080 p 30) 30 or something else? Do you know if this device is registering with a variable or

  a constant rate?

  Please check and review and then we'll decide what next.

  Thank you.

  RTA

• When I got the test I deleted some things out of my computer to make sure that I had enough space. I deleted something and now photoshop or any other applications do not work. How can I solve this problem? Since then, I have now bought creative cloud

  When I got the test I deleted some things out of my computer to make sure that I had enough space. I deleted something and now photoshop or any other applications do not work. How can I solve this problem? Since then, I have now bought creative cloud

  Is there a message you get when you launch Photoshop? Please tell us which version OS are you using, try: https://helpx.adobe.com/photoshop/kb/photoshop-crash-with-faulty-module-photoshop-exe.html

• After that update it tells me that the updates did not and he comes back, how can I solve this problem?

  I do automatic closing his day, the computer has not been connected in recent years. 46 updates downloaded, when I turn it on it tries to configuire updated and fails. He then returned back. How can I solve this problem?

  Hello

  What is the accurate and complete error message?

  Method 1:
  You can see the knowledge base article and check if it helps:
  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 2:
  You can stop the automatic update and install an update at a time and restart the computer to verify the update is causing the problem.
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-automatic-updating-on-or-off

  You may need to temporarily disable the antivirus software updating.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

• I tried for weeks install windows updates and get this message error (s) found: code 80070645 windows has encountered an unknown error. How can I solve this problem?

  Windows Update
  Error (s) found: code 80070645 windows has encountered an unknown error.
  I had before the shock of two antivirus this proven system restoration started but no help.
  Fix it to charge microsoft, but has not helped any.

  How can we if this problem, so I can install the updates I need?

  Hi Wyattsdaddy,

  Thanks for posting your question.

  Step 1: Check if Windows update-related services are set to automatic and started.

  Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.

  Check the above services below:
  (a) Background Intelligent Transfer Service
  (b) cryptographic service
  (c) Windows Update

  Step 2: Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. at the command prompt, type the following commands and press ENTER after each line:

  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
  output

  3 remove all tmp*.cat to the following folder:

  % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  Step 3: Reregister DLL files that are associated with Cryptographic Services

  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.

  2. at the command prompt, type the following commands and press ENTER after each command:

  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll

  regsvr32 softpub.dll
  regsvr32 wintrust.dll
  regsvr32 initpki.dll
  regsvr32 dssenh.dll
  regsvr32 rsaenh.dll
  regsvr32 gpkcsp.dll
  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll
  regsvr32 mssip32.dll
  regsvr32 cryptdlg.dll
  output

  Note: Click OK if prompted.

  Restart the computer.

  Step 4: Empty the software distribution folder

  1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
  2. in the Services (Local) pane, click Automatic updates and then click on stop.
  3. reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

  Note: By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5. make sure that the Windows distribution folder is empty, and then enlarge the Services (local) window.
  6. in the Services (Local) pane, click Automatic updates, and then click Start.
  7 restart the computer, and then run Windows Update again.

  Item appraised: http://support.Microsoft.com/default.aspx/KB/822798

  Step 5: Disable the security software
  Note: You can enable it later.
  Step 6: Scan Run SFC
  Please follow the steps below to the auditor of the filesystem as the first steps:

  1. Click Start and type cmd in the box start the search.
  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.
  http://support.Microsoft.com/kb/949104/

  Step 7: Components to reset Windows Update
  http://support.Microsoft.com/kb/971058

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• When I have something that is on my Windows Media Player before all that is on my Windows Media Player is also sent? How can I fix this?

  Sometimes, I wish to convey a funny video or a video clip, when I copy and sent the evrything particular item that is located in my Windows Media Player sends also!  How can I fix this?

  I was just to clarify... the "Temporary Internet files" folder
  referring to the appear on the recipient's computer.

  In any case, it is good to keep temporary Internet files
  ... empty folder it can improve the performance of your computer.

• Windows vista not install updates, how can I solve this problem

  I took my computer compaq running on windows vista & my windows updates will not install what can I do?

  I have been working on this since April too and may not know how to solve this problem.  Last update was in March.  I used the MicrosoftFixit.wu.MATSKB.Run with no luck.  He says that he can not solve the problem and leads to a MS web page, which doesn't help.   I also stop the update services and several DLLs and then restarted them without success, according to a website of windows troubleshooting.  I am not prepared to roll back, nor do I want to reload the operating system.  If I do that, I'm going to Linux.

• Windows Media took control of all my programs Ican can't open a program EmailXtender without media player displays the error message, how can I solve this

  I stupidly d/load a game when I open rar file it was running ok when I left the game I couldn't open any file, apparently, I have to put the media player as a host for all my programs. be grateful for the help to correct. I can't restore the system as he want to open via media player.

  PS I am a novice

  If I understand your problem here is what I would try.

  1. open the control panel.

  2. click on and open default programs.

  3. find the file extension judging by your message is a .rar file types list and click to highlight.

  4. click on change program.

  5 Select the program you want to open the file. If its not listed, you may need to search for it. Make sure that the box always use the file selected is checked and click OK.

  I hope this helps.

• I remove and reinstall Flash Player 11.3 daily! How can I solve this problem?

  I use Firefox and IE. Every day I have to remove and reinstall flash player to use it. Every day, I get the message that I have not installed Player F and I must download it. I have check the Add-ons and I can't find it there, but it is installed in the program, the s, and the features in my control panel. I'm usin win 7 32 bit and I always download the last player F 11.3. I'm tired of going through the same process everyday! BTW, I delete all my cookies and browsing history each time I want to close my explorers. It is not new, but I always did, but the problem with the F lawstest player is fairly recent since the first time I have download F player 11.3! Please help me.

  Looks like you can run in a Windows authorization number, try the instructions in this FAQ please:

  How can I fix Windows with Flash Player permission problems?

  Thank you

  Chris

• New headphones headset Freetalk Skype do not work. How can I solve this problem?

  These plug and play devices do not work.

  I just bought Skype provider «Freetalk» wireless headphones

  It took me a week to get the microphone to work, but the wireless system will not connect my PC to the helmet.

  I followed all the instructions, but NOTHING.

  Why is there never a hotline so that I can talk to someone.

  Its always a video or a daft frequently asked questions list was never my problem listed.

  Is there a doctor in the prayer of the House?

  I'm really depressed I paid a good price for stuff that never works first time.

  David

  England

  Hello

  Glad to know that the problem is solved. Let us know if face you any problems with Windows in the future.

• Webroot antivirus quarantined file ssl3.dll, now Firefox is not running. How can I solve this problem?

  I've updated to the new firefox 8. It worked fine until that webroot ran a virus scan. It has quarantined the file ssl3.dll as a medium risk threat. Is it safe for me to UN-quarantine, or is it a malicious file?

  Hi Codgerette,

  It's Greg of Webroot support in response to your message.

  I checked your Support ticket, and it seems that the reason that the file has been quarantined because of a false positive alarm that has been resolved. I can assure you that the Webroot products are tested in other software packages for compatibility. Sometimes certain applications that receive incremental updates can initially marked because of the behavioral detection technique in SecureAnywhere. Unlike security software, Webroot SecureAnywhere relies on a database of clouds to check files, while once this file has been considered safe, all customers who have SecureAnywhere of installed Webroot will not have this updated file in quarantine and installation should go smoothly.

  Thank you

  Greg

  Greg Davis
  

  Webroot support team
  http://www.webroot.com/en_US/index.html