Windows memory diagnostic tool does not work well

Hello
I have memory problem in vista, but I run the application above it works well, but after completion of this test and the PC is automatically restart, 1 - I don't see the icon of results on the taskbar. 2- Also, I don't see any action on event viewer

does anyone have simillar problem or solution?

(I suspect all lenovo neutralization process)

Hi remi,.

your solution was close but seems I have 3 m total asymmetrical memory, when I took 1 stick (Hyundai 1024 M) memory test took place with the display of the icon tray + report EV.

Tags: Lenovo Notebooks

Similar Questions

  • Windows memory diagnostic tools does not work

    Why doesn't windows memory diagnostic tools?

    www.memtest.org . for a free bootable memory testing utility

  • A satellite - PC diagnostic tool does not work

    I bought my Toshiba laptop in May 2009. It came bundled with Vista 32 bit. I tried several times to open diagnostic PC (a utility in the value Pack) but has never been able to do so despite a number of attempts to newly installed the VAP. A week ago, I upgraded to Windows 7 64 bit and downloaded the VAP for Windows 7 64 bit on the Toshiba site. I was like, goody, goody, now I can finally see what this thing. Tried to install and reinstall the VAP but PC diagnosis utility does not run. Or it runs invisibly in the background and I know of another soemthing.

    This is the kind of a rhetorical question that my system works well, but it aroused my curiosity to some extent - you know what can happen. It's like bugging me at this point!

    Has anyone out there actually to run PC diagnose? Is it me?

    Thank you.

    Hello

    Can you please tell us what laptop you have exactly?

    I have Satellite A300 and I can start PC diagnosis correctly but I have never used before. Why do you need it? Alternative, you can use another tool such as Everest or PC Wizard 2009. Check it!

    Please try to start PC diagnosis with the factory settings. I mean the pre-installed Windows version where all the drivers and tools are installed. Normally it should work.

  • Equium A60 - error caused by the RAM problem - Windows tool does not work!

    Hi all

    When closing my laptop, I got the blue "screen of death" and it restarts, windows came with this analysis of the accident: "error caused by the memory problem to live: run the Windows tool". I downloaded diagnostic tool (mstinst.exe), he opened so I got "windiag.iso" and he burned on a CD like they told me (the use of 'Record Now') and then I put in the CD drive and rebooted my computer. But it did not launch the tool! Does anyone know why it went wrong and how can I make it work? Even if I got the tool to work, I would be able to solve the problems of RAM anyway, just taking my laptop to a repair center?

    Thanks :)

    Hello

    I put t know if you have seen this page http://oca.microsoft.com/en/windiag.asp but there you can find a detailed explanation of how to use the Windows Memory Diagnostic tool.

    Good luck!

  • I ran the Windows memory diagnostic tool, he keeps repeating and will not be finished, finally Boot Manager Windows appears with the error code: 0xc000000d.

    I ran the windows memory diagnostic tool on my PC toshiba laptop equium, it restarts priming for display and then directly into the RAM test...
    Unfortunately, it will not end and keeps repeating and finally if leave to work for a few hours the Windows Boot Manager comes in and stops the RAM test while noting an error 0xc000000d code. I REALLY can't reformat what I have given crucial for the thesis of the University and I only have the Vista installation disc not repair...
    This RAM test shows whenever I start the PC, how can I forget that he spent his RAM test a pc and more? I'm so confused!

    Any ideas on how may get a repair disk or fix it otherwise? Thank you very much

    Run Memtest86 +: your computer passes this test?

    Memtest86 + is running from a floppy or CD and should eliminate or confirm if your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.

    Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

    http://www.memtest.org/
    Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
    http://www.overclockers.com/forums/showthread.php?t=409152

    J W Stuart: http://www.pagestart.com

  • Acer Windows 7 upgrade kit does NOT work!

    Hi I have an Acer Aspire 5538 (4 GB of RAM and 220 GB of memory) I'm trying to upgrade to Windows (vista and both are family premium). I read elsewhere on the site that someone had the same problem as me and earasing everything on computer seemed to have worked according to your suggestions (so I did and put everything on my USB). Later, I used the "dics ghost" factory, which deletes the database from the computer to the factory settings. So I'm trying to upgrade and the first CD has worked well "Acer upgrade disc. Now, when I put in the second one it says that my pc is not compatible, and that my pc must be x 86 (32-bit) or x 64 (64-bit). I went into the "system information", and it clearly states "x 86 based PC" until I do?. The second disk named: "Windows 7 upgrade media" does not work!

    Even I am confused. Tell you what, download Windows 7 Home Premium. ISO image, burn it to a blank DVD and use your product key to install and activate it.

    Windows 7 Edition Home Premium x 64 (64-bit)

    English: http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso

    32 bit
    http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

    ImgBurn - supporting the creation of CD more. ISO files,
    It supports a wide range of image file formats, and it's free.
    (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
    http://www.ImgBurn.com/

    http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

    Download and install burn ISO Gear (free):
    http://www.GearSoftware.com/gear-ISO-burn.php

    Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

    ------------------------------------------------------

    Boot from the Windows 7 DVD

    Click Install now

    Accept the license agreement

    When the option is displayed to select a type of installation, click (Custom advanced)

    Click on drive Options

    Select the system drive, click on remove (DO NOT remove the recovery when it exists)

    Click new

    Click on apply

    Click OK

    Click Format, and then click next to proceed with the installation

    Skip entering your product key Windows 7 and complete the installation.

    When you reach the desktop, click Start, right-click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click the link x days before activation.

    Click on the link that says: "show me other ways to activate.

    Enter the product key

    Click next

    Select the Activation of the phone

    Click Next when you enter your key page

    Select your country

    Click Next, call the number listed

    Be sure to explain your situation to the Appeals Officer.

    Provide the installation generated when ID requested by the call agent

    They give a confirmation ID in return, enter it

    Click next to complete the activation.

  • Satellite M30-113 does not work well when I use FreeBSD 6.2

    Hello

    My M30-113 does not work well when I use FreeBSD 6, 2-RELEASE http://www.FreeBSD.Org/

    I was told that Toshiba has release a new bios to correct the problem of cooling, because it does not allow me to fan passive cooling in FreeBSD.

    So could we have a new bios to solve this issue?

    Arabian salvation

    I am sure that mobile industry is focused on Windows operating system and hardware architecture together and preinstalled software are adapted and also configured to run well and stable.

    This operating system is supported and if something should be better portable manufacturers offer different updates to the BIOS. Of course, you can preinstall what you want but you can not expect support for everything you can find on the market and because of this I n t believe that you won't find any update especially for FreeBSD 6.2 - RELEASE BIOS.

  • P850 satellite and a WiFi - internet connection does not work well

    Hello

    My internet connection does not work with a Wi - Fi connection.
    I have laptop Satellite P850-131, which I bought a few months ago and I noticed that over the past two months the internet connection does not work well. When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

    I tried to do all the regular search but nothing works. Sometimes the message I get told that there is a problem with the DNS and other times with the IP address. However, with other computers I didn't have any problem at all to connect to the same Wi-Fis.

    All solutions?

    > When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

    If such a problem would appear again start the console (window BACK in typing CMS in search)
    Here, use the command * ipconfig / renew *.

  • Keyboard seems as if it does not work well

    Hello

    The brand of my laptop is Acer
    The product name is Esxtensa 5220.
    My Windows system is Ultimate(64Bit) 7

    I haven't installed a keyboard/mouse driver software when I installed Windows 7 because when I looked on the official website of Acer, I found no drivers keyboard and mouse for Windows 7(64Bit). Thus, Windows 7 was installed their automcatically just at the moment where it was installed. I didn't install any software dirver keyboard and mouse at all.

    I really see that my keyboard does not work well by tapping it. Sometimes I see another letter is typed though I haven't typed it.  In addition, the pointer of the mouse jumps sometimes to another location in the text box (for this text box for this forum) while typing which results in the insertion of letters in another place, other than what I want that they should be inserted.
    I don't know what it is, but I will say.
    When you type 't', so I sometimes see that another letter is typed rather instead. Also, sometimes while typing in the text box, a text, I found that the mouse pointer jumps to be placed in the middle or from the text, if the letters are written in the other place, other than I want to be they.

    So, is there a driver or a program associated with it for keyboard should be installed?

    It's shows in Device Manager that keyboard and mouse driver installed, Windows 7 was installed their automcatically just at the moment where it was installed. I didn't install any software dirver keyboard and mouse at all.

    Thank you very much.

    I tried install driver TougchPad of Snyaptic, which is specific for laptop HP Clubhouse anthter of my friends, so I'm satisied with the result, I've found so far, but the mouse has been updated only. In addition, I don't know if it's OK or it is some problems might occur in the future with driver not designed for Acer laptop.

    However, the keyboard is still with the driver of the lunch Manager.

    PS: I think that there is something bad goes with the download of the images through this forum, so I think that admins should find a sloution.

    I don't really see your screen shot post lately.

  • problem with NFS MOST WANTED... car does not work well

    Hey... I installed NFS MOST wanted on my laptop a long time ago... and 2 days ago it was working properly, but now during acceleration cars, its noise is too loud, and it does not work well or normal...

    Nobody understand my problem... plz suggest me...

    Try a system restore to when it worked:
    http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

    Check the reliability monitor to see what changed between where he worked and where you have noticed the problem:
    http://Windows.Microsoft.com/en-us/Windows7/how-to-use-reliability-monitor

    In particular, if there is no driver updates, try to back off:
    http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

  • "The cutting tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon.

    The error message "the snipping tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon.  However if I select snipping tool in the menu start nothing happens at all.

    Original legislative:

    M.

    Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

    -

    Microsoft has suggestions and offerings to

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

    -

    Moderator Forum Keith has a few suggestions along this line to

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

    -

    If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

    -

    You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

    -

    Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

    `

    When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

    -

    I hope this helps. Good luck.

  • My "move" tool does not work as usual.

    My move tool does not work as usual.

    After pasting an image into a new model, it is impossible to move around, to position the image on a desirable location. The photo is back in the middle of the model as soon as I leave the mouse.

    This is a silly question, I know... I'm sure that some button is locked or not well placed, but I can't find the solution.

    It would be great if someone could give me a clue...

    Thanks in advance,

    Bottom

  • Quick selection tool does not work after last update Photoshop CC

    I've updated to the latest version of Photoshop CC, and the Quick Selection tool does not work. I am able to make a choice, and then when I try to make multiple selections, I receive the ball well filled, and then nothing is selected.

    I have preferences in the performance, the value Panel "Big & Flat" in the historical and 'Basic' Cache in the settings of the graphics processor. Thus, the operating system is up-to-date.

    I restarted my computer, and now it works. Don't know what it is, but it works fine now.

    Thank you!

  • Items 11.  Resize image tool does not work.  I tried to chat online with Adobe - no help.

    I recently got a new computer (pc) and decided to download 11 elements instead of the old version that was on my old computer.   I discovered that the image resize tool does not work, even if the other functions seem to work well.

    I tried an online chat with Adobe.  Their suggestion was to buy another picture of them for $10 service. / month!

    You talk of Image > resize > Image size?

  • Photoshop Creative cloud blur tool does not work as it should

    Photoshop Creative cloud blur tool does not work as it should!

    I'm going to blur a painting that I do and he don't not blur and I use the Tablet wacom Intuos 5 Med.

    and I even put the sensitivty tablets for low pressure and then by default and still not get the blur tool to do its job.

    I even adjusted the brush settings too to be able to scramble even more on hard settings, still nothing.

    at least he bluring not enough to see major changes.

    the only way I can all that Fuzzy is using the filters blur or brushes (brush mixer) settings to mix colors and make this way.

    (note) I will not post my systems plug sorry I do not have it, and even technology from adobe says that I don't have to. and so I used!

    just need to advise of don't not to share the system specifications.

    and that is what this forum forums is for advice and read what others are saying about the issue.

    It is not to publish them or share the system specs!

    with the road so I don't need that advice please?

    Hello

    It could be that your picture is too large with respect to the dimensions in pixels for the well blur tool run.

    If you zoom in to 100% you see no change when you use the blur tool?

    What are the dimensions of the image in pixels?

    (Image > Image size)

    If you try a small image, the blur tool work?

    What happened when you use the mouse instead of your Tablet?

    Can you at least tell us what operating system and version of photoshop with your?

Maybe you are looking for

  • How to return to NO PRIVATE browsing in FF v 19.0.2?

    I chose the PRIVATE BROWSING to security checks, now I want to go back to NO PRIVATE browsing in FF v 19.0.2? And it is gray and Ctrl + Shift + P does not work either. This feature should be built in like the previous versions. How can I return to ST

  • Satellite U400 - 10 M - XP Pro facilities failed

    Hello guys,.Please, I need your advice.I bought U400 - 10 M, model PSU40E, with Windows Vista Home Basic pre-installed. I tried to install WinXP Pro, but during the instalation Windows sends me a message - Setup did not find any hard disk. BIOS recog

  • New version of Skype: 6.14.64.104 group chat

    Dear Skype community I just installed the latest version of Skype, because if provides new features like the cloud based message handling, so we can send messages between them, when they are offline. Consumption of processor of a newsgroup is also mu

  • Satellite R20: Can it work under Vista tablet features?

    If you install Vista on the Tablet R20 - you get the feature to write on the screen?

  • How to trace a function on the sphere?

    Hello I have a 2D chart and I would like to draw on a sphere as a "thermal conspiracy." The rows and columns of the table are already the elevation and azimuth angles. How to do? The image below shows an example of trace of the sphere. Thank you Fred