Windows Movie Maker 6.0 - release issues - VCD of low quality

Similar Questions

• After that I have released a video in windows movie maker and go to to watch, sometimes the video freezes but continues to go to the audio. What happens here?

  I do not understand and it makes me quite Mad... what should I do to remedy this?

  Hello

  ·          What is the operating system installed on your computer?

  ·          The same thing happens with all movies you post?

  ·          The film freezes at the same spot every time?

  ·          He was facing the same issue previously (all changes made to the computer until the problem started)?

  If you are using Windows Vista, you can consult the links below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/movie-settings-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Movie Maker - releasing only audio, is it possible to publish the exact length of the audio and does not include the lot of silent at the end?

  Windows Movie Maker - have 6 minutes of audio spliced, I would like to publish in the form of an audio clip with no video.  I heard that this is possible, and it all works, the 'framework' includes 6 more minutes of space without air circulation that gets compiled with the planned 6 minutes of audio matching 12 minutes of audio rather than the 6 minutes.  Is it possible to MovieMaker 'See' the end of my audio instend, to include 12 minutes in length with it default?  Should I include photos or video for the project to publish only 6 minutes, instead of the 12 minutes?   I hope this makes sense...

  I assume you are using Vista Movie Maker 6 and not Live Movie Maker?

  It is a problem that I've not seen before... the recorded length must be equal
  at times combined clips on the timeline. I guess it's possible
  If you've done a lot of editing/trimming clips... something was corrupted.

  I was wondering... If you import the .wma file saved in Movie Maker and drag
  it to the timeline... it shows the clip as being the length of 12 minutes? If it isn't...
  Perhaps you could he split and right click Delete unwanted 6 minutes and
  then re-save.

  Divide... drag the playback at the end of the music and the type indicator... CTRL + L
  .. .to split the file then right-click of the unwanted part and click on delete.

  Tip: Unlike clips video... audio clips can be dragged to the timeline, so don't forget
  they are dragged all the way to the left to prevent air from dead at the beginning or
  between the clips.

  It may be worth trying to go to... Tools / Options / compatibility... tab and the left click
  the "All default settings" button before the Save.

  And... If the clips audio source are not the. WMA format... it could be a useful
  try to convert them to WMA before you import into Movie Maker.

• How to 'release' several successively files from Windows Movie Maker in Win. DVD Maker?

  In Vista 6.0, after having published and recorded segments of 5 minutes of video/photo, in Windows Movie Maker, I don't know how to combine all in creation of Windows DVD.

  First part must be perfectly attached to the second part and so on. So I want to finalize approximately 10 segments on a single DVD saw the end of the previous seamlessly flow into the start of the next and so on.

  Please help me with this project. I would greatly appreciate.

  Thank you
  Ginger B

  Personally... I think that the first step would be to combine the
  clips into one. File WMV in Movie Maker.

  Next... using the following freeware... burn your video DVD.

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Mirror download (direct link) is the fastest)

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Vista Windows Movie Maker gives message "doesn't fit" releasing on DVD.

  Vista Windows Movie Maker gives an error "does not fit" when I try to publish my movie to a DVD (12 minutes too long). I removed half of the clips in the storyboard table and I still get the same error. The length of the film remains 02:42.

  If your burner is compatible... a double layer 8.5 GB DVD blank may be worth a try.
  (failure is a real possibility... make a video 02:42 is more than most systems)
  can handle)

  After the removal of the files in the storyboard table did you resave the project before embarking
  DVD Maker?

  The following older maybe offer some ideas on reducing the size of the project.

  Movie Maker - how to divide a project complex smaller?
  http://www.myvideoproblems.com/tutorials/MovieMaker/SplitComplexProject.htm

  In many cases not most of the large case projects / complex problems.
  Creation of several small projects and recording each in the. Film WMV
  format in a folder on your hard disk may be the answer. Then you can import
  the collection of. WMV to DVD Maker files and each clip becomes a scene
  (Chapter) you have to have up to 18 scenes.

  Good luck...

• Why my films are released in the form of thin and green lines when working in Windows Movie Maker?

  When I change the video, everything seems fine. I can see the video, I can modify it. But when I publish it, it becomes a black screen with a thin, green line oriented horizontally or vertically, that it seems to vary.

  I tried redownloading Windows Movie Maker (the link is on my Hotmail page) and it did not help. It's actually when the line is vertical.

  The strange thing is the titles on video and audio actually appear very well. But I don't think it's my camera because the video plays very well before I publish it. So what the hell is happening?

  I use a Flip camcorder if that helps.

  Here's a video showing the problem. You can hear the sound and see the title wipe across the screen: http://www.youtube.com/watch?v=guL_l-YOz8E

  Not sure if I have a few other Codec here or not, but I think I could.

  In any case, I realized the problem WITH WMM, I went and tried to save other ways and go with more parameters: DV - AVI (PAL) works!

• Error: Format of Windows Movie Maker not taken in charge when sending slide show

  original title: need help in windows movie maker... *...

  I use Windows Vista Home Premium and windows 7 on this computer. I am confused about how to view the slide show of pictures of classic cars, I took at a car show last weekend. I tried to put the slideshow on my external account and another external account, but got an error message in the sense of Windows Movie Maker format is not accepted. I was told that the file I have must be in WMV format. I tried a converter, but it did not have the required conversion. I can put slidshows together but how to get the updates and other, I'm kind of a total newbie to know what to do. Is there someone out there who can help me try to get this converted so I can view the slide show in the two external accounts I want to use? I don't know if it is acceptable to say what two external accounts I need, because sometimes forums do not allow the names of these accounts unrelated to the issue at hand.

  Any help is greatly appreciated and welcomed. I have the slide show minimized in my taskbar, so I will not lose her, but I'd love to get help as soon as possible. I'll check in here to see what kind of assistance is coming to meet me.

  I use Windows Vista Home Premium and windows 7 on this computer. I am confused about how to view the slide show of pictures of classic cars, I took at a car show last weekend. I tried to put the slideshow on my external account and another external account, but got an error message in the sense of Windows Movie Maker format is not accepted. I was told that the file I have must be in WMV format. I tried a converter, but it did not have the required conversion. I can put slidshows together but how to get the updates and other, I'm kind of a total newbie to know what to do. Is there someone out there who can help me try to get this converted so I can view the slide show in the two external accounts I want to use? I don't know if it is acceptable to say what two external accounts I need, because sometimes forums do not allow the names of these accounts unrelated to the issue at hand.

  Any help is greatly appreciated and welcomed. I have the slide show minimized in my taskbar, so I will not lose her, but I'd love to get help as soon as possible. I'll check in here to see what kind of assistance is coming to meet me.

  =========================================
  It seems that you saved the file (mswmm or wlmp project
  Depending on your version of Movie Maker) that is
  useful for a re-release in Movie Maker and cannot be read
  by others.

  Try to save your project in the. WMV Movie format...

  If you use Vista Movie Maker 6... try the following:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

  If you run Windows Live Movie Maker... try the following:

  How to save the project in Windows Live Movie Maker to WMV Format
  http://www.YouTube.com/watch?v=ZyqZm5MBc7o

• Windows Movie Maker - no video

  Hello! I have a problem with Windows Movie Maker.  When I import a video file mpeg it plays only the audio.  I get no video.  Ironically, when I play the same video in Windows Media Player, I have video, but no audio. Help, please.

  Installation of an AC3 Filter could improve audio
  issue in Windows Media Player.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  AC3 Filter
  http://AC3Filter.NET/wiki/projects/AC3Filter/releases
  (tests - AC3Filter 1.63 full b)

  Movie Maker has problems with MPEG files. It can
  be worth trying to convert MPEG for the WMV files
  format before you import into Movie Maker.

  There are to many converters available on the net...
  the following links are some examples.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (6) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

• M30X MultiDrive won't burn a DVD from Windows Movie Maker

  Hello

  My MultiDrive M30x will not burn the DVD from Windows Movie Maker and other applications.

  I also had problems with burning CDs (unbranded) of Windows XP, built in utility.

  The multidrive has problems with cheaper brand discs?

  Just to note,
  The laptop was to support guys three times until various issues.
  (1) the hard drive failed.
  (2) the multidrive has failed.
  (3) the motherboard replaced, due to power outages, it would not charge the battery, or recognize that the AC adapter is plugged.

  Note: The hard drive, not the fan made the most noise in mine!

  Thank you

  Hello

  As far as I know (i.e. pre-installed burning software Save now, drag-and - drop) disabled the option of Windows XP burning. In this case if you want to use the Movie Maker or Windows media player burning option, you need to activate this possibility.
  Please, go to the properties of the drivers (right click). Please select the recording tab. CD recording option on this drive must be marked.
  I use the software Nero burning and in my opinion he of one of the best burning programs. In addition, you should try different manufacturers CD/DVD because some CD and DVD is not compatible with some readers. Check the TDK CD and DVD. I never had no problem with these media.

  Best regards

• After you configure the video and music on Windows Movie Maker 2.6 screen goes black

  The Windows Movie Maker 2.6, I have my video and audio set up and perfect. But when the video and music that is made, the game screen turns black and theres no video and audio on. HELPP PLEAAASEEE! It is a House project which was awarded only to me yesterday. tomorrow, it is due.

  Hello

  (a) we would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (b) what operating system do you use?

  (c) what is the length of the film?

  (d) what is the original file of the film format (.avi, etc.)?

  The issue could be caused by audio and video filters. Please see the link below.

  Video filters in Windows Movie Maker: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/video-filters-in-Windows-Movie-Maker-frequently-asked-questions

• Windows movie maker won't save or burn to a cd

  I worked for 3 days, set up a movie with pictures and sound. When I go to save on the computer or save it on a cd, he gives a status bar that never changes to 0% and below it is a counter that indicates the remaining minutes. This counter goes well to the top instead of the bottom. the film that I put in place was about 25 minutes and I left the pc 9 hours and the minute was contrary to 3 600 000 minutes go. It's very confusing because I then dropped. I ended up using a program called dazzle to record video, but is very unstable and guard lock up when setting up a video image. hope someone has an answer for me. I am running win XP

  I worked for 3 days, set up a movie with pictures and sound. When I go to save on the computer or save it on a cd, he gives a status bar that never changes to 0% and below it is a counter that indicates the remaining minutes. This counter goes well to the top instead of the bottom. the film that I put in place was about 25 minutes and I left the pc 9 hours and the minute was contrary to 3 600 000 minutes go. It's very confusing because I then dropped. I ended up using a program called dazzle to record video, but is very unstable and guard lock up when setting up a video image. hope someone has an answer for me. I am running win XP

  ================================================
  There is a small chance that you may have better results if you
  record in DV - AVI format. I will paste the instructions below.

  Also, it may be worth trying to go to... Tools / Options / Compatibility
  tab and disable ALL filters before attempting to save.

  If your music files are something other than WMA format.. .they pourraient
  be the problem...  MP3 files can be problematic in Movie Maker.

  Several formats are apparently compatible
  with different versions of Movie Maker
  but the most reliable choices are:

  Photos - bmp, jpg
  Video - wmv
  Audio - wav, wma, wmv

  And the following link might be worth a visit:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  XP Windows Movie Maker 2.1...
  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

• Can anyone understand this? Windows Movie Maker woes by using Windows XP.

  First of all, I was able to make a video but could not save on my computer.  Now, I can't even make a video because when I drag and drop an image to the timeline, it disappears in the preview pane.  Curiously, when I drag and drop the music to the audio timeline it plays very well.  Go figure.  Thanks for your help.

  Hi Kestal,

  Please go to the Microsoft Community Forums.
  From the description of the question, we understand that you are unable to make videos in Windows Movie maker.
  Let me go ahead and help you with the issue.
   
  Please answer these questions, which will help us to help you best.
  1. do you get an error message?
  2. don't you make changes to the computer before the show?
   
  I suggest for the link and follow the steps in the article, and check if this can help:
  Windows Movie Maker 2 closes unexpectedly after you add a title, a video transition, or a video effect
  http://support.Microsoft.com/kb/836021
  
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• film on windows Movie maker is not compatible with windows live movie maker

  My sister made me a video with Windows Movie Maker and I have Windows Live Movie Maker, and he says that is not fully compatible.  Please help, his computer crashed and there is a video of my twin nephews has done for me.  There are currently on a USB key.  I'll do something to make it work.  It was during the last two years of their lives with me and I live 16 hours away from them.  Any suggestions would be greatly appreciated.

  Thank you

  Mary

  Thank you for your response.  I have Windows 7 and I have windows live Director 2011. When I plug in the USB, it says that the file ext is MSWMM

  Any information you have would be so appreciated.  Thank you very much

  Mary

  =========================================
  . MSWMM is not a video file... it's a project file
  Movie Maker XP or Vista Movie Maker 6. It is more useful
  for a re-release in Movie Maker on the system, it was created
  sure if you have copies of all the original source files...
  (Photos, video Clips, Audio Clips)...

  Ask your sister to save the project in the. Film WMV
  format, then send the. WMV file to you. You could
  who discovered in Windows Media Player.

  Here is some info on the savings that can be useful to your sister:

  XP Windows Movie Maker 2.1...
  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  Windows VIsta Movie Maker 6...
  The following article offers information on editing
  (save) in a film format that will play in
  Windows Media Player and can be shared.

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

• XP Pro and Windows Movie Maker

  I am running XP Pro and have created a slide show in Windows Movie Maker, but cannot burn to a disc.  I get a message to insert a blank disc, which, of course, I already have.  I downloaded Windows DVD maker, but which requires an ISO file to burn and the Movie Maker saves the file under a MSWMM file.  Can someone help me?   Thank you.

  I'm guessing that you want to create a video DVD that
  will play in a free-standing DVD player.

  First you must save your Movie Maker project to
  the. WMV video format (.mswmm is the project
  folder and is only useful for a re-release in Movie Maker).

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  OK... now you have a video clip and you have DVD
  Software to burn a DVD video creation.

  The following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  To allow a longer time on the DVD... left click the
  The project settings button / select video / open the target
  Bitrate of drop window. Choose a will more small number
  result in a longer time on the DVD. Press on... Accept.

  The vertical bar to the left of the screen will tell you
  How much compression you need.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Adobe, Ulead, etc... but at least it is a start.

  Good luck.

• Save an AVI with Windows Movie Maker

  When I try to record an AVI with Windows Movie Maker saves the file with what I wanted, but then, instead of stopping, he continues to play the part of the beginning of the file, I tried to do, sometimes 3èmes once3 and with a table of contents as the screen saying inbetwwne directed by: and created using Windows Movie Maker. Help?

  Thanks for the link, they're talking about the CPU activity, when you save a file, what is that and how to see what they are talking as in "...". the CPU activity will show pushed upward and down like Movie Maker is thinking and planning. "I now have a problem trying to save sections of the entire project that I then want to add together to make a video with about 500 pictures a.625 and between each picture, there is a fondu.25, I broke down to 100 images at the time and was able to save them as MSWMM files but now when I try and save them as files video it acts like it's going to save , but the timeline never begins to show progress and finally just fails. I know I have enough space on the computer and the images I use have not been moved from their original folder. I save all the original JPEG as BMP files files and who had worked to make videos with but now with the bland added he won't save a video.

  Thank you

  ===================================
  To see the activity of the UC... Open the Windows Task Manager
  and select the performance tab.

  Four ways to launch the Task Manager.

  (1) type... CTRL + Alt + Delete

  (2) type... CTRL + Shift + ESC

  (3) right click on the Windows taskbar and select... Task Manager

  (4) go to... Start / run... type or copy/paste... taskmgr.exe... Press on... Come in

  According to your description of the issue... your projects are
  too large or complex for your system resources.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.