Windows Movie Maker 6.0 Vista immediately stops working when you try to open.

Similar Questions

• The Setup program stops working when you try to uninstall the installer of qwest

  the Setup program stops working when you try to uninstall the software

  the Setup program stops working when you try to uninstall the software

  Hello

  Try uninstaling with revo uninstaller (download the trial for the link.)

  link

  Use the advanced uninstall, method, delete the associated files and reg keys.

  Good luck

  Chyavan

• Driver.exe has stopped working when you try to play Driver.San Francisco.

  I get the message DRIVER. EXE. Haven't STOPPED WORKING, when I try to play the game, Driver.San Francisco on my computer. Windows 7

  Hello

  1. what game do you play?

  2. have you made any changes to the computer?

  3. this problem occurs only with the particular game?

  4. What is the exact error message you received?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to see link and check.

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista

  http://support.Microsoft.com/kb/2665946

  See also:

  If the problem is related to Microsoft, I suggest you to see link and check.

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

• in windows movie maker I get sound but no picture when I try to view loaded videos__

  I have sound but no picture in windows movie maker.  Have already tried to restore filters to the State of origin without success

  I have sound but no picture in windows movie maker.  Have already tried to restore filters to the State of origin without success

  =====================================
  You may have a problem with incompatible source files:

  Several formats are apparently compatible with Movie Maker
  but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Receive error message "MFC Application has stop working" when you try to run a PED Basic on Windows 7

  Original title: I am trying to run a PED Basic on Windows 7, I am not able to access my creations on my hard drive. When I try to open the file, I get a MFC Application has quit job message. Any ideas? __

  Window 7

  1.06 based PED

  Hello photoheiress,

  Check the following:
  1) go to Brother Web site and check you have the latest Windows 7 drivers/software for your Brother model.
  (2) try to run in Compatibility Mode. If your Brother model is compatible with Windows XP, then choose XP or the brother Software was written for any operating system.
  (3) when you install the setup.exe or .msi file, right click and select "run as Administrator".

  If please reply back and let us know if none of the suggestions helped solve your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Organizer of 11 elements has stopped working when you try to change an album?

  Anyone encountered this?

  The only place where I had the problem is when you try to change an album.  After that it stops working, items 11 just stops.

  Operating system is Windows 7 Ultimate.

  Thank you...

  This problem has been all resolved with many tests - there ended up being a program called RoboForm (password remember program in the taskbar) has been walking on organizing PSE.  I disabled RoboForm and everything worked, he turned back and organizer failed on the Album / Edit.  I did at least a dozen times and each time the results were predictable - Organizer is broken when RoboForm was conducting and organizing worked when RoboForm has been turned off.

  Thank you... Pete

• Windows Live Movie Maker-runtime error R6025 pure virtual call when you try to save a project

  R6025 run-time error

  Whenever I try to save a project in Windows Live Movie Maker, I get a message that says: Runtime Error R6025-pure virual appeal. I'll click OK and the program stops working and stops

  Hello

  As you use Windows Live Director and the problem you posted is related to Windows Live movie maker, why it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  Windows Live Movie Maker forum:

  http://www.windowslivehelp.com/product.aspx?ProductID=5

• Windows stops working when you try to use Windows Search

  Original title : stop windows

  When I try to use windows search, windows stops always working.

  Hello

  The search Index may be corrupted. If so, you can rebuild, and then try again.

  "Reconstruction of the Index in Windows Vista"

  http://www.howtogeek.com/HOWTO/Windows-Vista/rebuilding-the-search-index-in-Windows-Vista/

  See you soon.

• Explorer Windows has stopped working when I try to open a folder

  When I tried to open a file under low load it stopped working. I use windows vista. I don't have windows installation CD because it was pre installed when I bought the laptop. I downloaded windows vista service pack. but the problem still persists. Please help me with solutions

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• "Windows host process (Rundll32) has stopped working"-when you try to uninstall/remove programs

  Only, I get this error when I try to uninstall/delete an application from my PC. Running Sfc/scannow and it found nothing wrong. Quick scans of Malwarebytes and MS Essentials is no malicious files, running a full scan of Malwarebytes.
  Please help, I need to uninstall something!
  ---------------------------------------------------------------------
  Windows host process (Rundll32) has stopped working
  Signature of the problem:
  Problem event name: APPCRASH
  Application name: RunDll32.EXE
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bc637
  Fault Module name: StackHash_9629
  Fault Module Version: 6.1.7601.17725
  Timestamp of Module error: 4ec49b8f
  Exception code: c0000374
  Exception offset: 000ce6c3
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 2057
  Information additional 1:9629
  More information 2: 9629b7be96a6d05c3ae74dcb4df31847
  Information additional 3:2716
  Additional information 4: 271690c76c60b0182163ae26acc5f429
  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Hello

  Method 1:

  I suggest to set up the computer in a clean boot state, then try to uninstall the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Windows 7 error: "Windows Explorer has stopped working" when you try to connect to network shares.

  I recently installed Windows 7 Ultimate on my laptop - clean, no upgrade. It's in the CARDS and not a copy of the beta version. When I try to connect to a network share, I get an error. "Windows Explorer has stopped working". If I go to start > run and type in \\servername\users, I'm prompted credentials. I enter domainname\administrator, then the password, as soon as I get an error message indicating that "Windows Explorer has stopped working" then by «Windows Explorer restarts...» "and then refreshes the screen. If I open computer > network > Servername, I invite myself again for credentials, but get the same message. The name of username/password combo does not seem to make a difference.

  An additional singularity, I went to control panel > "Backup of your computer", and when I was invited to a network location back up my system, I gave him the same set of location and network credential and the system have been successfully saved to the network drive.

  Press Win Logo key + R, type: fsmgmt.msc

  You see your own actions?

  If so, open the credentials manager in Control Panel and look for an entry like your network logon. Delete who can clear up.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• SE error message "Windows Explorer has stopped working" when you try to search for document files

  Original title: C:\Windows\Microsoft.NET\Framework64\v2.0.50727

  When I'm looking for my document folders all of a sudden, a window pops up saying: windows Explorer has stopped working, then it restarts my computer, I followed to DW20.exe and my friend told me to try and rename it but for some reason any he used to let me. This is a recurring problem and is extremely frustrating!

  Please help me

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Note 1 : when you perform the clean boot, then follow step 7 to reset the computer to start as usual after the boot process.

  Note 2: Make a backup of all your data on an external drive before you perform an upgrade in-place, as this could result in loss of data.

  Hope this information helps.

• installation of Windows services has stopped working when you try to install the software

  Unable to install software.tried cmd method, nothing happens

  Original title: installation of windows services has stopped working

  Hello Mohit,

  Welcome to the Microsoft Community Forums.

  I understand that you have a problem with the Windows Installer service.

  But I would like to know some more information on this issue to help you better.

  (1) what is the full error message?

  (2) what software are you trying to install?

  (3) have you tried to install any other software?

  (4) when you say, "tried cmd method" what exactly mean you?

  In the meantime, please try to follow the following suggestions to solve the problem.

  Method 1: First of all, try to follow the link below to troubleshoot the Windows Installer Service.

  How to fix problems with the Windows service install

  http://support.Microsoft.com/kb/2438651/en-us

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.
   

  I hope this helps. Otherwise, feel free write us back and we will be happy to help you.

  Thank you.

• Windows Media Player stops working when you try to view some AVI video files.

  I recently updated my computer and this problem developed after the upgrade. I don't know if I'm missing a codec or what.

  On some, but not all AVI video files when I try to view them with Windows Media Player (version 12.07601.17514), I get the following error Message:

  "Windows Media Player has stopped working.

  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  I use Windows 7 (64-bit).

  AVI video files causing a problem Windows Media Player are viewable by FinalMediaPlayer.

  I recently updated my computer and this problem developed after the upgrade. I don't know if I'm missing a codec or what.

  On some, but not all AVI video files when I try to view them with Windows Media Player (version 12.07601.17514), I get the following error Message:

  "Windows Media Player has stopped working.

  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  I use Windows 7 (64-bit).

  AVI video files causing a problem Windows Media Player are viewable by FinalMediaPlayer.

  ======================================
  No guarantee, but it might be interesting to try to download
  and install the following freeware codec pack:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Multimedia | ADVANCED Codecs for Windows 7 and 8
  http://www.MajorGeeks.com/files/details/Win7codecs.html

  Good luck...
  :

• SE charger of HEALTH professionals has stopped working when you try to install a game.

  I have a Loader of HEALTH professionals has stopped working while he was trying to install some treasures from the deep by Oberon Games.  I searched and found others have had the same problem with this error message.  I found help for Vista users, but there is nothing for the support for Windows 7 users.

  I am running Windows 7 Home Premium 64 bit on a B-311 HP 20 Pavilion with 4 GB of ram.  When I first had this system, I had 8 Home Premium 64-bit Windows installed on it and the game installed without any problems.

  Here are the details of the error message I get:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Start_Here.exe
  Application version: 2.0.1.4712
  Application timestamp: 4402d 429
  Fault Module name: Start_Here.exe
  Fault Module Version: 2.0.1.4712
  Fault Module Timestamp: 4402d 429
  Exception code: c0000005
  Exception offset: 00003045
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 79ee
  More information 2: 79ee8ce1c976216026f008da08a6a3a9
  Additional information 3: c6a2
  Additional information 4: c6a28a6a42863f9b270bcf8e85f99d62

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  I tried even to run the installation with Windows XP SP2 compatible mode set up option and you still get the same error message.

  chk if the game is compatible from this link

  http://www.Microsoft.com/en-in/Windows/compatibility/error/index

  If not install it in compatibility mode and click on the link for more information.

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

  If you still have problems with the game contact he is a developer or ask their support for more info...