Windows Movie Maker is not publish a 10 minute film.

Similar Questions

• Windows Movie Maker will not publish my videos properly!

  Hey guys. anyway I publish a video Director and 15 Minute long play through it fine, but after its publication, and I watch the video file it freezes at the same image (the media player does not freeze, he continues to play through, the video comes out badly) and all the audio stops and then the screen blacks on entirely for the rest of the video. Does anyone have a solution to this? I'd appreciate any help. Thank you

  Hi, Mike Vargas27,.

  (1) did you try to post another file to check if the problem is with this particular file or to do it with Windows Movie Maker?
  (2) what is the format of the file, which you try to publish a movie?
  (3) remember you to make changes to the computer before the question?
   
  Refer to the below mentioned method and check if it helps.
  Movie Maker 2 stops responding when you try to save a large movie file
  http://support.Microsoft.com/kb/814836
   
  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Note: The link above also applies to Windows XP.
   
  For reference:
  Formats supported by Windows Movie Maker in Windows XP file
  http://support.Microsoft.com/kb/308464
   
  FIX: Windows Movie Maker crashes when you install more than 100 video transitions or video effects on a computer that is running Windows XP
  http://support.Microsoft.com/kb/969395
   
  Hope this information helps.

• Windows Movie Maker will not publish my movie on my computer

  I tried to post this video to my computer from Windows Movie Maker. The video is long, only 42 seconds, so I doubt that there is a problem of length.

  When I try to publish the video, a dialog box appears and says "Windows Movie Maker cannot publish the movie to the specified location. Verify that the original source files used in your movie are still available, that the publishing location is still available, that there is enough available disk space, and then try again. »

  I've checked everything and nothing seems wrong or irrelevant. I had to completely wipe my computer about two days due to the 'Blue screen of death' experience, but I was able to install any new drivers and restore my computer to its factory settings. I don't know what to do. Help, please!

  More than likely you are using one or more sources
  files that are not completely compatible with Movie maker.

  Several formats are apparently compatible with film
  Machine, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

  See also the following links:

  Windows Movie Maker error cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/ Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• My Windows Movie Maker will not publish my video! Help!

  Whenever I try and publish my video, about 19% through, it will say "Windows Movie Maker cannot save the movie to the specified location. "Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space and then try again .

  I tried everything that I could find-unchecking filters, reset, settings, shorten, taking the effects, transitions, and even download free audio and put it back later. Please help , I spent all day on this video.

  It is 4 minutes and 18,62 megabytes.

  Thanks for your help, but they are already all WMV format.

  ====================================
  Still may be worth a try... convert wmv WMV.
  This will create a new version of the file that would work. Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker will not publish my movie - gets 6% & goes no further

  I recorded a movie and brought it into Windows Movie Maker without problems.  Then I edited the film (not to add anything or only pruned and spliced).  Now, I want to save the movie as a movie.  However when I do it, he won't get to 6% and then if freezes.  It won't convert everything yet, I even left it at night to convert (made sure my computer has not turned off the coast) and he did not always get from 6 percent.  Is there another way to change to the film of a project that I can run on a computer as a movie?  Or do you have a solution to get movie maker to work?   -Thank you

  I have exactly the same problem.  I imported the file as a wmv file, originally created by Gotowebinar.  I was able to edit and cut the file, but when I try to record on my computer, sometimes at 1% ^ and freezes.  I've updated all my drivers and still no improvement.  I use WMM 2.6, so there must be another problem of compatibility.

  =============================================
  What kind of editing you did and you have not added a music file?
  If_Yes_what was the format?

  Before you save it... try to go to... Tools / Options / Compatibility tab
  and uncheck the box 'All' filters / OK... then try to save.  If it still fails...
  try to save in the. DV - AVI format.

  To save a DV - AVI movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  ---

  FWIW... There is a compatible version Windows 7 Vista film
  Machine 6 you might have better results with:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Install Windows Movie Maker 6.0 on Windows Vista 7

  http://movies.blainesville.com/2010/05/installing-Windows-Movie-Maker-60-on.html

• Project Windows Movie Maker does not publish

  Windows MovieMaker

  Hi, I have a. MSWMM file that does not work in the school's computers. I did at home and trying to open it up to the school. At home I can't publish it to .wmv. It is said that it can not be argued. Same thing at school, but at school, it is said that when I try to open it. Pleaes Help!

  Hi, I have a. MSWMM file that does not work in the school's computers. I did at home and trying to open it up to the school. At home I can't publish it to .wmv. It is said that it can not be argued. Same thing at school, but at school, it is said that when I try to open it. Pleaes Help!

  =================================================
  Just some general info...

  FWIW... the .mswmm file is just the Movie Maker project file is not
  include the source of files (videos, photos, music, etc...), it records the
  path to the location of origin... so even if you could open it on school
  computer would be useless unless you also had copies of all sources
  files.

  If you cannot publish the project .mswmm to .wmv movie format file
  on the system that created the view may be a problem with the compatibility
  the source files.

  Several formats are apparently compatible with Movie Maker but most
  reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  Also... it may be interesting to try to open Movie Maker and go to... Tools / Options /.
  Compatibility tab and disable all filters / OK.

  It is possible that your project is too large and too complex for your system resources.
  It may be interesting to try to create several small projects and publish each of them as
  a file separate .wmv video. Then import the collection of clips .wmv in Windows
  DVD Maker and each one becomes a scene (chapter). Also... you can re-import
  the collection of small files in Movie Maker .wmv and combine them into a single file.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I use Vista, Windows Movie Maker. Problem publishing movies on computer.

  I use Vista, Windows Movie Maker. Problem publishing movies to Computer.When publish a movie in windows movie maker help it complete custom, stops at a certain % and remaining time increases.

  I use Vista, Windows Movie Maker. Problem publishing movies to Computer.When publish a movie in windows movie maker help it complete custom, stops at a certain % and remaining time increases.

  ===========================================
  More than likely you are using one or more incompatible source files...
  or the project may be too complex for your system resources.

  See the following article:

  Movie Maker - problem solving-
  "Can't save a movie."
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Might be worth trying to convert your video files in .wmv format
  before you import into Movie Maker.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Why a DVD recorded from Windows Movie Maker will not play on certain DVD players connected to your TV? How can you fix it so it will play?

  Why not a movie made Windows Movie Maker - do NOT play on some DVD players?  What can I do for the DVD player to allow the DVD to play?

  Hello

  See this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-DVD-Maker-videos-i-produce-wont-play-on-my/549c3c40-F02C-43b5-961f-6aa121197993

• Window Movie Maker will not import a mp3 file get that a C: {file location} .mp3 error could not be imported

  OP: Window Movie Maker will not import an mp3 file. Why?

  I tried to imort a song from my music file which is in mp3 format, but the program won't. She won't tell me why, it just says: "C: {file location} .mp3 cannot be imported."  I imported 2 other songs that are the same exact format. Why is it cant import the file?

  Hello spardigus,

  1 - is the full error you get when you try to import the file?

  Some of the Mp3 files can be compressed in various formats. I suggest that you search information below and check out them if you are able to import the files.

  It might be possible that the file may be corrupted and is not readable by Movie Maker. I suggest that you copy the file to a different location on your computer and you are trying to import.

  Also check the size of the file. If it shows 0 bytes, there are good chances that the file may be damaged.

  I suggest that you try to convert this file to avi format using an Audio Converter. There are several converters which helps you convert the file in the required format. Convert the file and try to import.

  You can use your favorite search engine to find the program that will help convert the files.

  DISCLAIMER OF THIRD PARTY SOFTWARE:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• film on windows Movie maker is not compatible with windows live movie maker

  My sister made me a video with Windows Movie Maker and I have Windows Live Movie Maker, and he says that is not fully compatible.  Please help, his computer crashed and there is a video of my twin nephews has done for me.  There are currently on a USB key.  I'll do something to make it work.  It was during the last two years of their lives with me and I live 16 hours away from them.  Any suggestions would be greatly appreciated.

  Thank you

  Mary

  Thank you for your response.  I have Windows 7 and I have windows live Director 2011. When I plug in the USB, it says that the file ext is MSWMM

  Any information you have would be so appreciated.  Thank you very much

  Mary

  =========================================
  . MSWMM is not a video file... it's a project file
  Movie Maker XP or Vista Movie Maker 6. It is more useful
  for a re-release in Movie Maker on the system, it was created
  sure if you have copies of all the original source files...
  (Photos, video Clips, Audio Clips)...

  Ask your sister to save the project in the. Film WMV
  format, then send the. WMV file to you. You could
  who discovered in Windows Media Player.

  Here is some info on the savings that can be useful to your sister:

  XP Windows Movie Maker 2.1...
  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  Windows VIsta Movie Maker 6...
  The following article offers information on editing
  (save) in a film format that will play in
  Windows Media Player and can be shared.

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

• Windows Movie Maker-impossible to publish and burn a movie on DVD

  In creation of DVD, I meswsage: "the temporary directory is not accessible.

  I never had this problem before. What should I do to be able to burn DVDs from my MOVIEMAKER

  I never had this problem before. What should I do to be able to burn DVDs from my MOVIEMAKER

  =================================
  I can only imagine that some of your sources files have
  have been moved or deleted.

  Try Publishing (save) your Movie Maker project
  in the format .wmv movie to a folder on your hard drive
  drive. Then import the .wmv video in DVD creation.

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Windows Vista-
  Creating Windows DVD
  Burn a video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Why my windows Movie Maker does not display my digital camera videos when just 3 days ago he did?

  Just 3 days ago my Windows Movie Maker worked and then I downloaded windows movie maker2.6 and it worked always, but I uninstalled version 2.6 and Windows now shows my pictures but not my video just sound and no picture! what the hell is happening? can I re-download the 2.6 movie maker?

  Duplicate the content of the Post-

  After 3 days of movie maker works correctly, now its does not work and all I get is sound and no picture for my videos from my digital camera and beautiful days ago! going on what?

  listen to about 3 days to a week ago my Windows movie maker worked very well, I upgraded my adobe flash player and windows movie maker has always worked correctly and now all of a suddden it does not work and it will only display the image and no video and it's the same thing with the media player, and digital photos from my camera are all ive used , there was never a problem and now all of a sudden thers a problem! is the problem with microsoft, because I know it isn't my camera and not on my computer! I have I have not changed anything ive summer since I started using Windows Movie Maker! my email is * address email is removed from the privacy * if you answered my question. Thanks.i required a response as soon as possible thank you.

  Just 3 days ago my Windows Movie Maker worked and then I downloaded windows movie maker2.6 and it worked always, but I uninstalled version 2.6 and Windows now shows my pictures but not my video just sound and no picture! what the hell is happening? can I re-download the 2.6 movie maker?

  ==================================
  Might be interesting to try to do a restore of the system at a time
  before the installation of 2.6.

  -Features - Windows 7 system restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  If you want a Movie Maker that has a scenario... it
  is a downloadable version of Vista Movie Maker 6:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Vista Windows Movie Maker Installer for Windows 7
  http://noeld.com/programs.asp?cat=video#wmminst

• Video clips in my program of Windows Movie Maker are not displayed.

  It shows the video is played, but no image shows. I checked and the filter is not the problem.

  Please mak that your videos are compatible with windows movie maker. As I know, windows movie maker supports well wmv, avi and mpg video. If your video clips have the wrong format, you can use this video converter to convert your videos to windows Movie Maker.

• Windows Movie Maker will not show the video

  I made a video in the movie player to windows, but every time I have save and play the video don't market not appear, but the fact of the audio. How can I make the video show?

  Hi laura234646,

  Did you check if the problem occurs with another drive?

  This problem may be caused by audio\video filters present on the computer.

  Step 1: I suggest that disable you video filters and driver, to do this, follow these steps:

  Director of open windows,

  1. click on Toolsand then click Options.

  2. click on the compatibility tab.

  3. to turn off a filter, clear the check box next to the name of the video filter.

  Now, check if the problem is resolved.

  http://Windows.Microsoft.com/en-us/Windows-Vista/video-filters-in-Windows-Movie-Maker-frequently-asked-questions

  (See the section, what can I do if I have problems with video in Windows Movie Maker filters?)

  If the problem persists,

  Step 2: Reduce hardware acceleration to check

  1. open display settings by clicking the Start button, clicking Control Panel, on appearance and customization, personalization, and then clicking display settings.

  2. click on display settings, and then click Advanced settings.

  3. click on the Troubleshooting tab, and then click on change settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. reduce the hardware acceleration slider to zero.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sometimes the clips in Windows Movie Maker will not play during preview and not at all after publication...

  Hello!  I just create a movie using Windows Movie Maker (HP Pavilion dv6000/Windows Vista Home Premium).  During the PREVIEW, the first part of the video of my film sometimes will not play (view) while the audio continues. Sometimes he will play (view).  All clips are saved in the right place, the file formats are correct, and everything else that I think is done correctly.  In addition, after the publication of the video, he did the same thing; some parts of the beginning is not playing (see) only the audio.  I believe that this can have started happening after a few times when an error message pops up saying something like "Video player has stopped responding, but has revived with success...» "or something like that.

  Now, I tried a few things to try to fix the problem.  I noticed that if I take the transitions and effects on the clips then they play but every time. I don't know why this happens only at the beginning of the movie and not all of the film since I also have clips with transitions and effects in the end.  Help!  This is my first time using this program/do a movie (and it's really good if I must say for me... he can win an Oscar! * smile *), but I wonder if I did something by mistake at the origin of this problem...

  Signature

  "Confused."

  KW03, I wish allows you to check if the same thing happens with the Movie Maker live, and this will give us an idea of the question of whether it is related to the effects of media player or your codecs. Also test it in another account that the component for WMM store is different on each profile. I've included the steps:
  http://download.live.com/MovieMaker
  (Note that you can select exactly what you want to install once you load the installation process)

  • 1. Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
    2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Click on create a new account.
    4. Type the name you want to assign to the user account, choose the type of administrator account on the computer, and then click on create an account.
    5. Log out and log in to the new account.
    6. Verify that the problem you are experiencing is resolved

    Create a new user profile:

    Follow these steps to create a new account, we can test:

    (To remove the test profile follow the steps above and choose to remove the account from the user accounts).

    If the work of nine and you discover you have a profile corrupted, take the measures listed in the following article to copy your data to the new: difficulty a user profile is corrupted

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.