Windows Movie Maker stop during encoding

Similar Questions

• Why does my windows Movie Maker stop burn to my dvd to 60percent without message

  Burning my family video with windows movie maker, from the (encoded) copy to dvd disc, and it stops at 60% completion with no error message.  How can I solve this problem.

  Thank you

  WE

  Just a few ideas...

  Large, complex projects are prone to problems.
  If you create several small projects and publish (Save)
  each format .wmv or .avi movie to a folder on
  your hard drive, you can then import the clips collected
  DVD Maker and each one becomes a scene
  (Chapter)... you can have up to 18 scenes.

  ===

  Your source files might have compatibility issues...

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

  ===

  It may be interesting to try to open Movie Maker and go to...
  Tools / Options / Compatibility tab and disable all the
  filters / OK.

  ===

  Publication (save) the project to the DV - AVI or WMV
  film in Movie Maker format and then import the
  movie DVD Maker file may be worth a try.

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

• Windows Movie Maker stops working after importing video MP4

  I am running Movie Maker version 6 and Windows Vista Home Premium. I imported my videos my camcorder Flip Ultra HD from Sony MP4. The clips will play in preview pane and I can edit in the timeline or storyboard table. However, after about 5 minutes of use Moviemaker stops working for no apparent reason. (Moviemaker stopped job searching a solution), is never resolved. It also stops working if I try to see my edited video. I downloaded Moviemaker Live, but it has the same problem. To make matters worse I now get the message "this application has requested the execution to terminate in an unusual way. Contact for the moreinformation application support team. "It's really fustrating because I can't edit my videos.

  Here's the last problem report;

  Signature of the problem

  Problem event name: APPCRASH

  Application name: MOVIEMK.exe

  Application version: 6.0.6002.18273

  Application timestamp: 4c1a4a61

  Fault Module name: ntdll.dll

  Fault Module Version: 6.0.6002.18005

  Timestamp of Module error: 49e03821

  Exception code: c0000005

  Exception offset: 00066739

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  Additional information 1: ab51

  More information 2: 30060666b195e9269b06006ab226ecc8

  Movie Maker stop Workimg

  3 more information: 5f68

  Additional information 4: 127e4a098eab65ae6dd9861f2c342be8

  Please can someone help me.

  Thank you

  Concerning

  Gavin

  Hello kekesala,

  Here is the link which contains the steps to perform a clean boot in Windows Vista and Windows 7:

  http://support.Microsoft.com/kb/929135

  The link below includes a list of the types of supported files which can be imported into Windows Movie Maker.  You can try to convert the MP4 video to a Windows Movie Maker video file type supported and then try to create the project, or the film.

  Importing files into Windows Movie Maker: frequently asked questions

  If the problem persists when you try to create a new project with Windows Movie Maker and a video file type supported, try to run the System File Checker tool to troubleshoot missing or corrupted system files and then check the issue. To do this, please see the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  I hope this information is useful.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Movie Maker ceases to meet impossible to publish the movie

  Windows Movie Maker stop - impossible to publish the movie

  Windows Movie Maker gel

  I can't publish my movie in windows movie maker - fully he gets to 76% and never completely complete edition (I tried several times, but continues to be the same thing). Everything that happens, is the estimated time for the film to be finished being published continues to increase, but nothing ever happens to the status. I think it has something to do with when I [Preview] play a movie in windows movie maker that I have edited, to halfway through the movie, the movie freezes and won't play any more, although I have yet to play clips. Can anyone has any ideas on how I fix? Thanks ():

  I can't publish my movie in windows movie maker - fully he gets to 76% and never completely complete edition (I tried several times, but continues to be the same thing). Everything that happens, is the estimated time for the film to be finished being published continues to increase, but nothing ever happens to the status. I think it has something to do with when I [Preview] play a movie in windows movie maker that I have edited, to halfway through the movie, the movie freezes and won't play any more, although I have yet to play clips. Can anyone has any ideas on how I fix? Thanks ():

  =============================================
  I guess you have a problem with incompatible
  files sources... the most reliable formats to use are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wmv, wav

  The following articles may be useful:

  Type of file with Movie Maker compatibility
  http://www.myvideoproblems.com/tutorials/MovieMaker/File_type_compatibility.htm

  What file type should I use in Movie Maker?
  http://www.myvideoproblems.com/tutorials/MovieMaker/WhichFileTypeInMovieMaker.htm

  John Inzer - MS - MVP - digital media experience

• Windows movie maker now crashes whenever I do drag and drop an audio file in the main window, what I can do?

  Signature of the problem:
  Problem event name: BEX
  Application name: MOVIEMK.exe
  Application version: 6.0.6002.18273
  Application timestamp: 4c1a4a61
  Fault Module name: StackHash_fd00
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 00000000
  Exception code: c0000005
  Exception data: 00000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160
  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
   
  ___
  Data Execution Prevention - I can't turn off for WMM and I can't uninstall and re-install WMM...

  Hello

  1. don't you make changes on the computer before the show?
  2. you receive an error message on the computer?
  3 is confined with any particular audio file?

  4. what happens when turninig turn off DEP for the program?
  In some cases, a file with a file type that Windows Movie Maker does not support may cause Windows Movie Maker stops responding. This can be caused by incompatible video filters. You can verify what filters are installed and force Windows Movie Maker to avoid loading specific filters by restarting simply Windows Movie Maker.
  Method 1:
  You can solve the problem by following the steps from the link:
  Problems with importing files into Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/problems-importing-files-into-Windows-Movie-Maker
  Method 2:
  You can also perform a clean boot and check if the problem occurs.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 3:
  You can see the city link below to download the codecs on the computer.
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions
  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Why my Windows movie maker keeps "not responding" or "restart" whenever I try a mounting from a saved file.

  Whenever I try to edit anything to move a clip to the evolution of the duration of a song the Windows movie maker stops working or "restarts". Even adding transistions and effects causes this. Why?

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1:

  Set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2:

  Error message when you try to start Windows Movie Maker in Windows Vista: "Movie Maker has stopped working" http://support.microsoft.com/kb/923122

  Hope this information is useful.

• Sometimes the clips in Windows Movie Maker will not play during preview and not at all after publication...

  Hello!  I just create a movie using Windows Movie Maker (HP Pavilion dv6000/Windows Vista Home Premium).  During the PREVIEW, the first part of the video of my film sometimes will not play (view) while the audio continues. Sometimes he will play (view).  All clips are saved in the right place, the file formats are correct, and everything else that I think is done correctly.  In addition, after the publication of the video, he did the same thing; some parts of the beginning is not playing (see) only the audio.  I believe that this can have started happening after a few times when an error message pops up saying something like "Video player has stopped responding, but has revived with success...» "or something like that.

  Now, I tried a few things to try to fix the problem.  I noticed that if I take the transitions and effects on the clips then they play but every time. I don't know why this happens only at the beginning of the movie and not all of the film since I also have clips with transitions and effects in the end.  Help!  This is my first time using this program/do a movie (and it's really good if I must say for me... he can win an Oscar! * smile *), but I wonder if I did something by mistake at the origin of this problem...

  Signature

  "Confused."

  KW03, I wish allows you to check if the same thing happens with the Movie Maker live, and this will give us an idea of the question of whether it is related to the effects of media player or your codecs. Also test it in another account that the component for WMM store is different on each profile. I've included the steps:
  http://download.live.com/MovieMaker
  (Note that you can select exactly what you want to install once you load the installation process)

  • 1. Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
    2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Click on create a new account.
    4. Type the name you want to assign to the user account, choose the type of administrator account on the computer, and then click on create an account.
    5. Log out and log in to the new account.
    6. Verify that the problem you are experiencing is resolved

    Create a new user profile:

    Follow these steps to create a new account, we can test:

    (To remove the test profile follow the steps above and choose to remove the account from the user accounts).

    If the work of nine and you discover you have a profile corrupted, take the measures listed in the following article to copy your data to the new: difficulty a user profile is corrupted

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion a6110n PC stops when you publish movies with Windows Movie Maker

  I use Windows Movie Maker to try to "Publish movie" for playback on a computer (creation '. ") WMV files") [200 MB of files created for 15-minute video].  When I run the app, even by itself, with no other applications running, the PC fan starts strong.  If the computer has served for a period of time, the computer will be completely and suddenly close, before ending the video creation.

  If I run Movie Maker when you first start up the computer, the machine can finish successfully creating the film without stopping.

  I don't know what I need to upgrade or replace.  The CPU is overheating?  Or the video card?  Or both?

  If I need to replace the fan, any suggestion would be appreciated.  (I'm talking a CPU fan? Graphics card fan? or what?)

  My PC Specs:

  Windows Vista Edition Home Premium SP1

  4 GB memory

  320GB SATA Hard Drive - 40GB available

  AMD 64 x 2 Dual Core processor 4400 + 2.30 GHz

  Hi, Yes this video rendering really puts a load on your cpu!  The first thing that comes to mind, and the easiest to fix, is simply clean up the inevitable dust bunnies that accumulate inside the tower.  Have you already checked for that?  If this is not the case, remove the side panel of the tower and clean all the dust, especially around the heatsink from the processor.  Compressed canned air works very well for this.  Here is your product guide that shows how to remove the side panel: a6110n be sure to unplug the power cord from your machine before you start on it!  And let us know what you found.

  In addition, I think that you may know this already because you have taken the trouble to include in your listing, but your hard drive is too full.  Vista is a resource hog, memory and available disk space.  He needs a lot of space to work.  And if it doesn't have enough room, it makes your memory and cpu have to work hard.  You ran a disk clean up lately?

  Start button-> computer-> right click on drive C: Local-> properties-> click "Disk Cleanup".  A pop-up window appears.  I put a control over everything on the list.  Then click on the 'More Options' tab at the top of this window, look under "system restore and shadow copies ' and click on 'Clean up '.  Which may take several minutes if you have not done before.  When it's finished, go back to the top of this window, click on 'Disk cleanup' and click the 'OK' button at the bottom of the window to remove all the files that you checked.  You must THEN run a defragmentation.

  In my opinion, and depending on how much space you freed up with cleaning the disc, you will need to spend at least 50 GB of your data files on this hard drive and maintain.   And then you need to add an additional hard drive to your system.  Many options for this just depends on your exact needs.

  in any case, it's my ideas.  If cleaning the dust bunnies and the hard drive does not resolve the problem then perhaps someone else on the forum will be able to helpl with more technical type suggestions.  I think they're going to need additional information about your system, however.  For example, I noticed that you added 2 GB of RAM.  And you mentioned something about a graphics card fan, but your machine came with integrated graphics.  Also added a video card?  If so, exactly what video card do you have installed and have you also changed the power supply?  Any other changes to your machine to factory specifications?

• Message: My windows Movie Maker has stopped working in the last week.

  Message: My windows stopped filmmaker working within the last week, began when the error message "the collections of file is not valid or is damaged. A new empty collections file has been created. When I try and import a file of any image type or otherwise, the file is not imported and the error message ends with "unknown error."
  So far WMM worked without fault, as full support has been removed for XP I am now unable to get all the patches. There is also no file conversion to allow to allow the import of files. Times, error message "class not registered"?
  What I'd really like is a copy of WMM version 5.1 (Build 2600 xpsp_sp3_gdr.101209 - 1647: Service Pack 3) Windows Movie Maker Version 2.1. 4028 0, I would continue with WMM, but am completely reluctant to upgrade to Windows 7. Someone at - he found a solution for the problem that I am facing.

  If you can open Movie Maker... try to go to... Tools / Options /.
  Compatibility on the left tab, click on the "all default settings"
  button / OK.

  Also... Do a restore of the system in Mode safe for a time
  before the problem started, may be worth a try.

  See the following articles:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  How to restore a Windows XP system
  a previous state using system restore
  http://bertk.MVPs.org/

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

  How to start safe mode in Windows XP
  http://bertk.MVPs.org/html/SafeMode.html

  Good luck...

• "Windows Movie Maker has stopped working

  Original title: Movie Maker of Window

  I'm doing a library of DVDs of my son's football, but every time I try to use Movie Maker of Window I immediately or after I spent hours working get a message saying "Windows Movie Maker has stopped working" then it says windows contact me if they find a solution. No idea how I can prevent this?

  Hi Liska3,

  What operating system is installed on your computer?

  Windows Movie Maker comes pre-installed with Vista, and according to the guidelines of your error message, I would say that you have Vista.

  The following Microsoft Knowledge Base article addresses this issue. Please go through the suggestions.

  Error message when you try to start Windows Movie Maker in Windows Vista: "Movie Maker has stopped working".
  http://support.Microsoft.com/kb/923122

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am maing a movie with windows movie maker and you cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

  I'm doing a movie with windows movie maker and cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

  I'm doing a movie with windows movie maker and cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

  ===============================
  If a music file Movie Maker crashes
  in a format that is not compatible. If you convert
  the file to the format of .wma before importing, you
  can have a better result.

  The converter below might be helpful to try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your audio clips on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck.
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker & DVD Maker stop responding when you import a .avi file

  Help, please.

  The two Windows Movie Maker DVD Maker & allow me to import .avi files I ask, but then I get a message that the program has stopped working. I have Windows Vista Home Premium and I a novice in computer science.

  Thank you.

  Tommy

  Hello

  ·        Have you been able to import before avi files to your Windows movie maker and the creation of DVD?

  ·        You are able to import another file without any problem format?

  Try to import another file type (format) and check if the problem persists.

   

  Step 1:

  Damaged codec is often a cause of crashes with Windows Movie Maker and Windows DVD Maker.

  If possible, use a program to convert your Windows Media movies first and then try to import it.

  Step 2:

  If the movie maker was working properly before, I suggest you to reset the windows movie maker settings. Follow the steps in the article mentioned below.

  Restore defaultWindows Movie Maker settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-default-Windows-Movie-Maker-settings

  Problems with importing files into Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/problems-importing-files-into-Windows-Movie-Maker

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/923122

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm doing a DVD on Windows Movie Maker, but some of the clips do not play during the slide show there at - it a way to solve this problem? __

  I'm trying to make a DVD on Windows Movie Maker, but some of the clips won't play during the slide show, is there a way to solve this problem? I tried the reset, I tried to put videos a few times more, but whenever I play, a clip works very well, because it progresses and plays for the next clip, it appears white, but if I play the clip in an individual file, it works fine. Help, please.

  I'm trying to make a DVD on Windows Movie Maker, but some of the clips won't play during the slide show, is there a way to solve this problem? I tried the reset, I tried to put videos a few times more, but whenever I play, a clip works very well, because it progresses and plays for the next clip, it appears white, but if I play the clip in an individual file, it works fine. Help, please.

  =======================================
  Just some thoughts...

  It may be useful if you are going to... Tools / Options / Compatibility tab...
  and uncheck all filters.

  Also... it might be a compatibility problem with your source files...
  (videos / photos / music files)

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  Also... If it is a large complex project, you could have a system
  the question of resources. The answer would be to create
  more modest projects.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker 6.0 Vista immediately stops working when you try to open.

  Hello!

  I've been all around the internet trying to solve this problem, but nothing has worked so far.  When I try to start Windows Movie Maker 6.0 for Vista, (in general), it stops working at their opening saying the following:

  "Windows Movie Maker has stopped working".

  There has been a few times when it actually opens and I can work on my videos, however, it's very, very, rare and seems to happen randomly.

  I tried to open in safe mode, but it still fails to open.  I also tried to open .avi short and simple with WMM 6.0 files to see if it will be open, but that, generally, does not either.

  Once, I was able to open random and I have disabled all the filters on the Compatibility tab and temporarily activated only video filters that I needed.  That seemed to fix the problem for several days, and I could open Movie Maker 6.0 several times.  Sometimes it would freeze everything and save, or stop working when importing video files, but at least it would be open.  I was able to record some videos.  After a few days, my computer day and WMM 6.0 is more open more.  I don't know if yes or no update is the reason why Movie Maker 6.0 started crashing again, but it was the only thing that has changed on my computer while I could uncheck the Compatibility tab filters and open WMM 6.0. [Could uncheck all filters to be part of the problem?]

  I usually works with .mov files, and I read on how this type of file sometimes causes problems with Windows Movie Maker.  However, the problem normally occurs when I try to open the program (and if WMM opens, I can very well change .mov files).  I do not think that the file type is causing the crash, but I guess that's always a possibility...

  I also read that sometimes Windows Movie Maker 6.0 for vista doesn't work with all computers that have vista installed, and Windows Movie Maker 2.6 must be used to place.  Windows Movie Maker 2.6 is working fine on my computer, but it cannot change the .mov files, or record in HD.  I had horribly degrading the quality of the video with the conversions of files to use WMM 2.6.  Windows Movie Maker 6.0 is much better, on the rare occasions that it works.  Do you think I should use Windows Movie Maker 2.6 now?

  Here are two problem reports that appear more often when you try to open Windows Movie maker 6.0.  The window of support almost always said I need to update my computer again (even if there is no new update), or that it is a problem of security Data Execution Prevention.  Windows Movie Maker cannot be added to the list of exceptions to Data Execution Prevention, or I can check to see if the filters from the Compatibility tab are always disabled in the program, I don't know how to solve this problem...

  -----------------------------------------------------------------

  Signature of the problem
  Problem event name: BEX
  Application name: MOVIEMK.exe
  Application version: 6.0.6001.18341
  Application timestamp: 4ad5c77d
  Fault Module name: StackHash_6f96
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 0378415b
  Exception code: c0000005
  Exception data: 00000008
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 6f96
  More information 2: 39ee662180b2f2ed5cfc67e5914ae855
  Information additional 3:6366
  Additional information 4: 8328a225406b340b1b7b5f591aa5688c

  Additional information about the problem
  Bucket ID: 1197617492

  -----------------------------------------------------------------

  Signature of the problem
  Problem event name: APPCRASH
  Application name: MOVIEMK.exe
  Application version: 6.0.6001.18341
  Application timestamp: 4ad5c77d
  Fault Module name: StackHash_1703
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 032e41a4
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Information additional 1:1703
  More information 2: 2264db07e74365624c50317d7b856ae9
  Information additional 3:1344
  Additional information 4: 875fa2ef9d2bdca96466e8af55d1ae6e

  Additional information about the problem
  Bucket ID: 1909412930

  -----------------------------------------------------------------

  The "BEX" error happens much more frequently than the "APPCRASH" error  In addition, I have Windows Vista home premium installed and a 32-bit operating system.  I don't know how to read the problem reports, or if it's all the information you need.  I'm not very good with computers at all the... Any help and ideas would be greatly appreciated!

  Thank you!

  Very often, but not always, Code exception: c0000005 is a permissions access error, so have you tried right-clicking on the MM shortcut or .exe and selecting the option "Run As Administrator"?  Other times a reinstallation of the program crash can fix.  As you can not do with Movie Maker the next best option is to try the System File Checker.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Have you tested another user even if you need to create one to do this?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  See how many unsigned drivers, you have running on your computer.  This article will guide you on the instructions, but all you need to do is type sigverif in start run.

  How to identify unsigned with sigverif utility in Windows Vista drivers
  http://www.WinVistaClub.com/F34.html

  Vista Movie Maker DEP Fix
  http://www.YouTube.com/watch?v=tkpURM4FFt0

  In the fix above which is sometimes, but not always with success, it is suggested to leave it on the AVI decompressor.

  There are a few suggestions that Nero is a problem if you run that at all?

  Windows Movie Maker has stopped working
  http://blog.SteveX.NET/2006/11/Windows-Movie-Maker-has-stopped-working/

  If a piece of software can crash Movie Maker may be other software can do, then try Movie Maker in a clean environment, without other software running.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  http://www.Google.com/search?q=Movie+Maker+DEP+Vista&RLS=com.Microsoft:-AU & ie = UTF-8 & oe = UTF-8 & startIndex = & startPage = 1

• create dvd windows movie maker and Windows stopped working

  I've never had a problem with the creation of dvd windows or windows movie maker, but all of a sudden, the two do not work. In windows, creating DVDs when I add items to the dvd maker screen becomes transparent and stops working and I get an error message saying that windows dvd maker has stopped working, windows will notify if a solution is available, etc.. Same thing with windows movie maker. I have already registered the module 'iac25_32.ax' and I installed windows vista service pack 2, but it did not help. Here are the details of the problem:

  Creating Windows dvd;

  Problem event name: APPCRASH

  Application name: DVDMaker.exe

  Application version: 6.0.6002.18005

  Application timestamp: 49e02385

  Fault Module name: xvid.ax

  Fault Module Version: 0.0.0.0

  Timestamp of Module error: 3e86de1e

  Exception code: c0000094

  Exception offset: 0003dd11

  OS version: 6.0.6002.2.2.0.256.1

  Locale ID: 16393

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Bucket ID: 1294330809

  Director of Windows: -.

  Problem event name: APPCRASH

  Application name: MOVIEMK.exe

  Application version: 6.0.6002.18005

  Application timestamp: 49e0238f

  Fault Module name: xvid.ax

  Fault Module Version: 0.0.0.0

  Timestamp of Module error: 3e86de1e

  Exception code: c0000094

  Exception offset: 0003dd11

  OS version: 6.0.6002.2.2.0.256.1

  Locale ID: 16393

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  I've never had a problem with the creation of dvd windows or windows movie maker, but all of a sudden, the two do not work. In windows, creating DVDs when I add items to the dvd maker screen becomes transparent and stops working and I get an error message saying that windows dvd maker has stopped working, windows will notify if a solution is available, etc.. Same thing with windows movie maker. I have already registered the module 'iac25_32.ax' and I installed windows vista service pack 2, but it did not help. Here are the details of the problem:

  Creating Windows dvd;

  Problem event name: APPCRASH

  Application name: DVDMaker.exe

  Application version: 6.0.6002.18005

  Application timestamp: 49e02385

  Fault Module name: xvid.ax

  Fault Module Version: 0.0.0.0

  Timestamp of Module error: 3e86de1e

  Exception code: c0000094

  Exception offset: 0003dd11

  OS version: 6.0.6002.2.2.0.256.1

  Locale ID: 16393

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Bucket ID: 1294330809

  Director of Windows: -.

  Problem event name: APPCRASH

  Application name: MOVIEMK.exe

  Application version: 6.0.6002.18005

  Application timestamp: 49e0238f

  Fault Module name: xvid.ax

  Fault Module Version: 0.0.0.0

  Timestamp of Module error: 3e86de1e

  Exception code: c0000094

  Exception offset: 0003dd11

  OS version: 6.0.6002.2.2.0.256.1

  Locale ID: 16393

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  ==================================
  It looks like the xvid.ax filter might be the problem?

  Might be interesting to try to open Movie Maker and go to...
  Tools / Options / Compatibility tab and disable all the
  filters... or simply click on the button restore all default settings.

  The following links may be also worth a visit:

  DVD Maker has stopped working
  http://social.answers.Microsoft.com/forums/en-us/vistapictures/thread/edcb015f-9431-4d89-95e8-531db1f26c77

  Video filters in Windows DVD Maker: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/video-filters-in-Windows-DVD-Maker-frequently-asked-questions

  Windows Vista-
  Video filters in Windows Movie Maker:
  Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/video-filters-in-Windows-Movie-Maker-frequently-asked-questions

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.