Windows not recognizing no no Ethernet card after a clean reinstall of Vista Ultimate and a SP2 update.

Similar Questions

• Netflix in MCE does not work after a clean install of Vista Ultimate

  Having had a lot of problems trying to Netflix in MCE works, I decided to start over.  I did the following:

  1. installed new, clean Windows Vista Ultimate w / SP2 x 86, directly from MSDN Downloads.

  2 set up the wireless internet connection.

  3. start MCE.  Internet configuration and automatic downloads.  A ran 'download now '.  (How know when it is done?)  Waited a while.

  4 restarted MCE.  Netflix is there.  A run 'Install' to Netflix.  After it installed Netflix MCE and Silverlight, MCE restarted.  No Netflix! Tried the option 'download now '.  No effect.

  5 download and install the cumulative patches for MCE.  Restrarted machine and Netflix.  No Netflix.

  6 left MCE.  As an administrator, run "start/wait mcupdate-u - nogc ' from the command window.  No Netflix.

  I tried this twice, so it is reproducible.  Microsoft PLEASE help!

  Thanks for the reply.  After much gnashing of teeth, I finally got Netflix for work in MCE.  My current problem is, when I try to connect to Netflix to MCE, I get the error "there was a problem of signing.  Check your connection Internet is working and try again. »

  I tested my Internet from MCE and it works.

  I thought that maybe the patch you suggest would help, so I applied it and several others listed on the downloads page (KB957209 KB958653, KB977864, KB932818, 941229 KB967632, KB982480.)  I then followed the patches with the additional steps above.  I can not connect to Netflix to MCE - same error.

• After a clean install of Vista Ultimate 32-bit. I get a message that stopped Microsoft Volume Shadow Copy Services.

  I can't get updates or install programs. What should I do?

  Hi Busch_hawg,

  Thank you for your question in the Forum of answers.

  You get an error next to the message above?

  I suggest to use the System File Checker to check corrupt or missing files.
  Here is an article on how to do it:

  http://support.Microsoft.com/kb/936212

  I also suggest checking the event viewer to see if additional information is available to post on this forum.
  Here is an article on it to help you get started:

  http://support.Microsoft.com/kb/947321

  You can restart the service by clicking the Windows Orb on the taskbar, the type of 'services' in the search field.
  Right click on the 'Services' entry that appears, and then click "Run as Administrator". You can ask your password or to OK action.
  Locate the service "Volume Shadow Copy" in the list on the right, right-click and select "Start" to start the service.

  Please let us know how it works.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Reinstall the Vista Ultimate upgrade after replacing hard drive - remove Windows PowerShell

  My HDD recently crashed and the manufacturer (Dell) gave me a new one with the software and systems II had orginially purchased pre-installed on the drive.  In this case, I had Vista Home Premium installed.  I got about a year ago, bought and upgraded to Vista Ultimate and I'm now trying to reinstall (I have it on DVD).  When I do, I get a message that I must remove Windows PowerShell before upgrade.  I can't find PowerShell in the application removal utility, even if I can find it when I search in the start menu.

  Any thoughts on how to deal with this?

  In addition, since the beginning of this thread, I found the following instructions in another thread:

  How to uninstall Windows PowerShell

  To uninstall Windows PowerShell 1.0 in Windows Vista, follow these steps:

  1. Click Start, in the Search box, type appwiz.cpl and press ENTER.
  2. In the tasks list, click View Installed Updates.
  3. In the list to uninstall an update , right-click right of Windows PowerShell (TM) 1.0 (KB928439), click on uninstall and follow the instructions to remove Windows PowerShell 1.0.

  But, I do not see Windows PowerShell (TM) 1.0 (KB928439) in the generated list (although there are many, many others).  I found three programs of powershell appears when I put in the search box of start powershell.  Can I just delete them?

  Thank you.

  Try download Revo http://www.snapfiles.com/reviews/revo-uninstaller/revouninstaller.html to uninstall all the programs of PowerShell.  I hope that you will find the main program so it can be uninstalled.

  If that doesn't work, uninstall each update of PowerShell that you find.  Also, check the master list of program to see if you can find.  A when done, reboot and start the installation again and see if you come up against the same error.  If so, we may have to try another way to get rid of it - but we will cross that bridge if we come to it.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have an optiplex 745 windows vista ultimate and it keeps freezing.

  Original title: freezing problem

  I have an optiplex 745 windows vista ultimate and it keeps freezing. Can someone please?

  Hello

  See if this helps you:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Update drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea to run the System File Checker tool if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

  If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Windows Vista Ultimate 64-bit SP2 becomes error 80070490 in windows update

  I have Windows Vista Ultimate 64-bit SP2.

  Get the error 80070490 Windows update installs.

  The following recommended by what could find did not work:

  I tried Microsoft Readiness tool several times without success.

  I tried to use my drive Vista system with the help of the option UPGRADE as many times and always without success. The upgrade option is still grayed out.

  I did a new INSTALL 2 different times.  I then run the update of Windows, over and over again at every reboot of levels. I always come back to the same level and get the error 80070490 on following 9 updates:

  Update security for Windows Vista for x 64-based systems (KB2564958)

  Update for Windows Vista for x 64-based systems (KB970430)

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2604094)

  Update security for Windows Vista for x 64-based systems (KB2378111)

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2686833)

  Update for Windows Vista for x 64-based systems (KB2345886)

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2656374)

  Update security for Windows Vista for x 6

  How to cross this error 80070490

  Hello

  Thanks for posting in the Microsoft Community.

  1. you did make an image backup?

  2. what type of installation are you running?

  Please see the link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070490

• error 800b0100 windows update KB2660649 - Windows Vista Ultimate 32 bit SP2 installation - solved

  Original title: 800 b 0100 KB2660649

  • Run Windows Update on Vista Ultimate 32 bit SP2 under BootCamp on Macbook Pro
  • Trying to install KB2660649 by using Windows Update
  • Difficulty is unable to install - response 800b0100
  • Running sfc/scannow - successful, no error
  • Have downloaded and run the update tool system - successful, no errors
  • Downloaded and run the stand-alone version on the fix - failed, and saw the following in the system log: Windows Update 'A security update for Windows (KB2660649)' could not be installed because of an error: 2148204800 "no signature was present in the subject. (Command line: "" C:\Windows\system32\wusa.exe""C:\Users\steve\Downloads\Windows6.0-KB2660649-x86.msu"")
  • Tried WU and seen the following in the system log messages: b Windows Servicing began a process of change in package KB2660649 (security update) State of Resolved (Resolved) to Staged (Staged) (b) Windows Servicing has not completed the process of the configuration package KB2660649 (security update) in State of Resolved (Resolved)

  Any ideas anyone please?

  Amazing!  I have already mentioned that I lived the problem of the "feature Windows empty window.  Seeing that my initially reported problem and seemed to have similar signs and given that I had a clear explanation on how to solve this problem, I did it - and these two problems are now history.

  In the two following links, you will find the description and method to solve the problem of the 'empty Windows feature window' and (b) a method for appropriating errant registry entries.

  http://www.Raymond.CC/blog/fix-blank-or-empty-list-in-Vista-turn-Windows-features-on-or-off-optionalfeaturesexe/

  http://www.Raymond.CC/blog/full-control-permission-to-delete-or-edit-restricted-Windows-registry/

  This * may * solve your problem too - it seems that there is a generic problem with determination rather poor problem feedback.

  Good luck and thanks to all who contributed

  Best regards, Steve

• Windows 8 Pro 64 bit not start nVidia nForce Ethernet driver after Windows Update

  Hello

  A couple of days, I installed Windows 8 Pro on my nForce 570 SLI with two ethernet interfaces integrated and an AMD processor and it seems to work very well. But then I installed all updates from Windows Update and now the ethernet drivers will not start. They worked very well until I did Windows Update facilities. I mean, otherwise I would not be able to do the Windows Update.

  Pilots initially in service to those who came with the installation of Windows 8 Pro. As a solution I forced the driver installation from the package of drivers nForce 15,58 for Windows 7 64 bit, but no change.

  The messages I get when making a diagnosis of Windows network is:
  Problems found
  The "Ethernet" adapter does not work correctly
  The 'Ethernet' knows of driver or hardware-related problems.

  The same messages for 'Ethernet 2 '.

  I was not able to find related reports in the event viewer

  Could someone help me please?

  Best regards
  LaurentZG

  Hello Manu,

  Thank you very much for your support.

  By chance, I found a post over in the Asus forum where a few other guys had the same problem. One of them stated that the specific ethernet chip has been sensitive to static electricity. If a light bulb then where I thought I should try to carry out the motherboard. So I unplugged the power cord and press the power button on my computer for about 30 seconds. Problem solved. Connection to the network is in use again :)

  Best regards
  LaurentZG

• WiFi not recognized on Tecra A3 card

  Hello
  I have a laptop old enough, I think that on registration to this site he said the production date was end of 2005. It is a Tecra A3 series.
  I was wondering if someone could give me some tips for the inside wireless card.

  I tried to download the drivers for the wireless card that says that the Web from Toshiba site, but installing the driver just tells me plug-in card, when it is already.
  I took out the card and its reference number is: PA3362U 1MPC.
  Its not even come in windows XP Device Manager.

  EDIT: Sorry just a few details, it was working at one point. But I had to reformat, since reinstalling windows. I read that it is possible that "the map is not enabled", but it is not recognized in Device Manager?

  So far I have not conscientious, but I recently upgraded my wireless broadband connection and I would like to be able to use the wireless card.
  Anyone could offer me some tips on how to get it operational?

  Thanks for your time in reading.
  Andy.

  Hello

  If your wireless network card is properly inserted, then it should appear in the NICs as unknown device under Device Manager (if the driver has not been installed) or must be properly recognized as Intel PRO/Wireless 2200 b/G Wlan card.

  Yes, PA3362U 1MPC part number seems to belong to the * Intel PRO/Wireless 2200 b / G * Wlan card. I have goggled a bit and found some info that could confirm it.

  So, you should definitely use an Intel Wlan driver for this card to work.

  Concerning

• Windows not recognizing generic php do not monitor invidia

  I installed a new nvidia graphics card.  I installed the driver but when I try to change the resolution windows 7 is not recognizing a generic php monitor

  Monitor - graphics card - two different things. The graphics card is referred to as
  Adapter in Device Manager.
  When you R / click on the desktop is an option of screen resolution?
  There was also an option to open the Nvidia Control Panel.

  You download and install the latest drivers from Nvidia?  -

  NVIDIA Driver Downloads - advanced search

  If you have used the drivers on the disk can be supplied with the card, you may want to
  update the drivers on the disk are usually a bit old.
  Also - do not use Windows updates for graphics drivers. Manually install downloads.
  .

• ProBook 6570b: 10 Windows not recognizing display

  Tried to upgrade to Windows 10 after having received assurances from the MS and HP as my phone is compatible at 100% and I tells me that the screen is not compatible.  Not sure why there is NO mention of this question anywhere?  Maybe I should come back to buy Lenovo as they have decent driver/support?

  @sirparkinson

  Check the Device Manager.

  The paper in my previous post explains.

• Defender of Windows not recognizing avg

  Original title: Windows defender not recognizing avg

  My laptop isn't grateful moy. AVG works very well. He has known for more than a year but now windows indicates that the computer does not recognize, it is anti virus protection.

  Hello

  (1) what is the exact error message you get?

  (2) did you of recent changes to the computer before the show?

  Windows doesn't detect all antivirus programs, and some antivirus programs don't report their status to Windows.

  If you receive notifications related to security on your virus protection software, but you know that your antivirus software is installed and updated, you can follow the steps below to stop receiving these notifications.

  Note: You should do this only if you are sure you have a complete and up-to-date antivirus program installed on your computer and that real-time scanning, which checks every file before it opened or used, is turned on.

  Method 1:

  a. open Action Center by clicking the Start button, click Control Panel, and then, under system and security, clicking on the status of your computer.

  (b) in the left pane, click on the change Action Center settings.

  c. disable the Virus protection check box, and then click OK.

  Check out the link for more information.

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-antivirus-software-that-Windows-doesn ' t - search

  Method 2:

  We can refer to the article and follow the steps there.

  http://social.technet.Microsoft.com/forums/en/itprovistasecurity/thread/911f514d-0017-4f72-b97f-ddde37b1a795

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

   

• Windows not recognizing the Trend Micro firewall.

  My Windows Firewall status is "not monitored". My Trend Micro firewall is enabled. Recently I changed the State of my Windows Firewall from "Off" to "Not monitored" so I would not get a Windows security alert noting that my firewall is disabled. My question: Trend Micro says that Windows recognizes the Trend Micro firewall that is on and then start to monitor, rather than its own firewall. Why Windows not recognize is not the firewall of Trend Micro and so not monitoring in the Windows Security Center? (Yes, I'm 100% sure that my Trend Micro firewall is running, I even went through the process of uninstalling, then put it back in order to ensure with the trend on the live chat)

  Also try to update your Windows and install the latest service pack and update of trend, if the problem has NOT resolved trend contact technical support or visit their support site

• Re-installing Lightroom after a clean reinstall of Windows

  Hi, I need to know how I can reinstall Lightroom after doing a clean reinstall of Windows on my PC. Windows consumes 51.3 GB of my SS 100 GB drive, and the only recommendation that Microsoft has for me is to reinstall Windows. Huge pain I then have to reinstall all of my software. How do I get Adobe Lightroom?

  Please see:

  Download Photoshop Lightroom

  I hope this helps.

  Concerning

  Megha Rawat