Windows partition under windows USB problems

So, I created my windows 7 Home Premium on my mac, but I cannot get the USB to connect to windows to download all the drivers for Windows runs correctly. USB works on the Mac partition, it does everything just not on a windows. What can I do to fix this? Thanks for the help!

If the USB is not recognized by Windows, you do not have a USB driver. Please download Paragon NTFS for Mac trial, and you will have access to reading / writing on the Windows partition that allows you to copy the package of drivers on the Windows side. Start Windows, and run setup.exe from the package to the location you copied to. use a destination folder that you will easily recognize.

Tags: Windows Software

Similar Questions

  • p6310f: Windows Update problem

    When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

    Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

    Shdocvw.dll "" ""

    browseui.dll   "                "                    "                     "

    MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

    Actprxy.dll Failed is not found

    gpkcsp.dll        "        "           "             "

    initpki.dll          "           "                 "

    wuaueng1.dll"" "

    c:\windows\system32\dllcache\wucltui.dll"" "

    wuweb.dll      "            "           "              "

    muweb.dll    "            "              "            "

    I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

    Hello glockrow ;

    Let me welcome you on the HP forums!

    I read your post about windows update problems and wanted to help.

    I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

    So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

    After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

    HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

    It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

    You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.

    Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.

    What I recommend is the following:
    (1) download and install Macrium reflect (MR)
    (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
    (3) use the option to create a CD or a USB startup key

    NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

    So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • After the last updates of windows have problems with start up and now drivers

    Hello

    After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

    May 14, last night I had several (automatically) downloaded windows update

    Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

    Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

    Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

    Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

    Thank you

    Hi Jane,

    You have a disk to install Windows 7 with you?

    I suggest you to check the event viewer for error details report.

    Open event viewer.

    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  • Windows 7 memory 0x002bbb0 error code when you install Windows USB manager?

    When trying to install Windows USB Manager I memory could not be written.

    Then it gives me this error 0x002bbb0 code?

    Any help would be great! Thank you

    Hello

    Check the links below.

    http://Windows.Microsoft.com/en-us/Windows7/preventing-low-memory-problems

    http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

    Hope this information helps.

  • Satellite A135-S4527 - Windows encountered problem & fails to load

    At startup, Windows attempts to load, but I get the message Windows encountered problem communicating with a device. Windows does not load.
    Tried all attempts for load in SafeMode etc but no luck. Tried to load the Toshiba Recovery utility but still no luck.

    Fortunately the data is saved, but I have no recovery disks.

    How can I get the recovery disc for this machine for delivery here in the United Kingdom when it is a product of the USA?
    If the recovery discs can be ordered in the United States where to order? (I have an address to the United States for delivery if necessary).

    Hello

    As far as I know here in Europe, you will not be able to recovery media order for the laptop models to the United States. If you have a person in the United States, they must contact the nearest authorized service provider and order it for you. Later they send it to you.

    If you need to address and http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Repair&sn=false check phone numbers

    Good bye

  • Windows 7 - problem 'says that my laptop was inconsistent.

    Original title: Windows 7 problem.

    At this moment, I have problems with Microsoft. A message to see if my laptop was ready for Windows 7. When I tried another message came to say that my laptop was inconsistent and that I should check my internet and try again later. My internet is OK. Please help me, I'm missing out on a lot.

    Hello

    Start the computer in safe mode with network, run Windows 7 Upgrade Advisor and check the status of the issue.

    To start the computer in safe mode with network.

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Please let us know if you need more assistance.

  • Error Windows Update problem "don't shut down your computer updates being configured"

    OT: Windows Update problem.

    Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?

    Start here (ignore the title): http://support.microsoft.com/kb/949358

  • KB2676562 error 80070490 Windows update problem

    original title: Windows Update problem

    I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

    I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

    Have you tried everything in this article: http://support.microsoft.com/kb/958044

    Method 1: run (Checksur.exe) system update readiness tool

    If this method does not resolve the problem, go to method 2.

    Method 2: perform a Windows repair installation

  • Active window color problem - cannot change the background color

    original title: Active window color problem

    By right-clicking: Desktop, then click on: personalization / window color and appearance / settings (Advanced) appearance, Windows user can assign a background color of the active window in any application.  This is useful for those of us who don't want a stark white screen; We can assign a mild pastel tint which may be easier on the eyes for long term sessions.

    At some recent point, I lost the background color of the active window within Windows uses 'household.  I still not my background color assigned in any application I run (Word, Mail, etc.), but using Windows Explorer to navigate through my hard drive, the active window is now always the default stark white Windows.  How this change and can it be forced to adhere to the assigned active window background color?

    Hello

    Step 1: Check if the problem continues in a new user account.

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-user-account

    Step 2: If the problem does not persist in a new user account, then the old profile could have been corrupted. Try the following article to fix a corrupted user profile.

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  • When I try to use the Skype window having problem

    When I try to use the Skype window having problem

    Hello

    you don't say what problem?

    and if the problem only occurs when using Skype, ask the Support of Skype

    https://support.Skype.com/en/

  • Where can I download the A2901A adb interface windows usb driver? Thank you

    Where can I download the A2901A adb interface windows usb driver? Thank you

    There is already a thread about this, try searching for Bad a2109. You should find something useful. You mean the a2109 of ZTE released in us, correct? I think it is a2109f, same thing in the other thread.

  • Windows Update problem - 0 * 80070005

    * Original title: windows update problem

    I'm not get windows updates.so I run the program update troubleshooter.in windows he showed the error of update problem as... windows 0 * 80070005 (2016_05_17_T_06_03_42P) .and this problem was not fixed. and again, I have no answer answer.pl.

    First of all

    KB3138612 would be the last for a manual installation

    The first would actually KB3145739

    Homepage for all versions,

    https://TechNet.Microsoft.com/library/security/MS16-039

    After that you manually install you KB3153199

    I would also like to before doing this,

    Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.

    4.5.2 is more consistent to have installed,

    https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642

  • Windows Update problems 0x8024a005

    problems of updating Windows 7 every time I try to update I get error 0x8024a005 next

    OT:

    Windows Update problems

    Try the Windows Update troubleshooting tool
    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    (The steps # 1 a, 1 b, 1 c, 1 d and 1e)

    Disable third-party firewalls.

    Also: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/win-7-updates-keep-repeating/12ecb219-c374-e011-8dfc-68b599b31bf5

    J W Stuart: http://www.pagestart.com

  • Windows 10 problems

    Windows 10 says it is ready to install, but when I click on the blue screen goes away and nothing happens.

    Hi Daniel,.

    Restart the computer and check.

    Try to run the Windows Update Troubleshooter and check.

    The problems with the installation of the updates:

    http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

    Problems with your upgrade to Windows 10? Get help here:
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-windows_install/Windows-10-upgrade/6493e352-B300-4ec8-bb99-c8c0a3a01c1c

    Get help with Windows 10 installation and upgrade mistakes:

    http://Windows.Microsoft.com/en-us/Windows-10/upgrade-install-errors-Windows-10

    I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

  • To the PSE11 windows 8 category PSE6/windows vista: problem catalog conversion

    Hello. I saved my PSE6 on external hard drive (I optimized/repaired before saving) and then installed PSE11 on the new 8 pc windows - no problem. Followed all the advice, I have seen/read to convert saved PSE6 catalog but doesn't seem to find (I tried custom location / browse and go to the folder where the backup is saved, but it just says: "no file matching your search").

    I then tried to install PSE6 on new computer restored catalogue him, then looked for the catalogue still in PSE11. It seemed now to find and convert, but some files where missing and a lot of keywords/tags as missing.

    I tried to uninstall the lot (including the removal of the files in the files they were saved in the new computer) and after looking at the Forum, tried to backup old PSE6 on old pc again, but this time the first saved metadata on files and then sustained upward (took HOURS!) Reinstalled PSE11 on the new computer and tried - back to the first problem - does not "see" the backup, even if I know it's there (there is a .tly file, etc.).

    I don't really want two versions of the PSE on the new PC and I REALLY don't want to have to start from scratch all 5000 marking files! I hope someone can help and tell me what I'm missing. I certainly not a seasoned PSE user, mainly due to lack of time and started with PSE6 knowing nothing at all. Am hoping to have more time to use PSE as I will work from home, but I just spent the major part of 2 days trying to figure this...

    Yes, of course. Please check that you check the box corresponding to the maintenance of the folder hierarchy.

    Thank you

    Catherine

Maybe you are looking for