Windows Re installation
my system is samsung All-in-One PC > DP700A3B comes with windows 7, and I have upgraded to windows 8. I cannot override because it seems that the window 8 I improved to isn't original... Please can I do
Please help me with the following information related to this issue:
- You try to upgrade your operating system to Windows 8 for Windows 8.1?
- Your Windows operating system is activated? To check the activation status, press the keys Windows + Pause break on your keyboard.
- What is the complete error message you get when you are trying to level?
You can see the following link for more information on the upgrade of Windows 8 for Windows 8.1:
Update to Windows 8.1 of Windows 8
Please answer us with the information required to help you further.
Windows 7 installs using Bootcamp in the Sierra of the OS?
The system requirements for installing Windows 7 is provided here: install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support
So I try to install windows 10 via bootcamp on my macbook pro 2012.
However, I still have problems when I get to the screen of partition on windows 10 installation.
So I opened the USB BOOT EFI and install from there.
I enter my product key, accept the license, and I'm greeted by the partitioning. I select the bootcamp partition, but it will not format, gives me an error message, or it will allow me to format, but no real format. If I try to delete the partition I can't create a new one, because it gives me an error message. If I try to solve this problem by making the partition EXFAT / FAT always displays the problem. If I format it under OS X EXTENDED it allows me to move forward, but after installation, it simply gives me the blue screen of death trying to boot from the BOOT EFI of SSD.
No idea how to solve this problem, I am getting very frustrated and frankly upset against apple to give instructions so little.
Is there a particular reason to interrupt the normal process flow using the Alt/Option key? Is your USB, USB2 flash drive Installer?
I noticed ribooth has also posted a message with the same problem... but I haven't seen a real answer. The problem: if I try to install Windows 2000 Professional (including SP2) on my satellite M30X-130. The windows 2000 Setup program crashes with a "page in a no fault paged area" in acpi.sys just at the moment where the status in the status bar has been changed from windows 2000. If I press F7 during startup, acpi support is disabled and no page error occurs but the windows 2000 installation hangs on "the first screen" where you should be able to start, stop and? installation. There is no additional hardware installed and I'm unable to partition and format the HD with W2k. If I do it with win98 and create a FAT32 partition and try to install w2k on it I get the same ' page in a no fault paged area "acpi.sys error. Any suggestions to fix this?
Make sure that the system BIOS and other hardware is compatible with Windows 2000.
This article may also help.
HOW to: Specify a specific HAL or a third party during the installation of Windows
I've never had a problem installing Windows 7 via bootcamp on my Mac, but it seems an impossible feat, right now! :))
I have a Windows 7 bootable *.iso, but since I'm on 2010 Macbook Pro, I have to burn it to a DVD and install from there (I can't find the disk of valuable facilities).
It is, every time that I burn it, it does not get recognized as a bootable DVD with bootcamp and not appear as a boot disk in the selection screen, you need to keep alt right after the startup chime.
I tried at different speeds (2 x, 4 x, 8 x). I tried to convert the image using disk utility and selection of DVD/CD master and burning at different speeds.
I'm in two DVD and I don't know what to do :) I've got El Capitan installed (so less disk utility options).
Please help! :))
This latest DVD Virgin and it worked! BUT dig this error I had!
Boot Camp only supports 64-bit Windows 8 installation. Please use a Flash DRIVE or a DVD that contains 64-bit Windows 8.
WHAT? !!! Even though it says to install Windows 7 or a later version?
I want to punch someone who works for Apple now!
I have a Satellite L300. I have NO dvd of windows vista, the seller told me that the dvd of windows found in the pc.
Now I have to solve a problem of windows update (80073712 - kb 971644) and in this link http://support.microsoft.com/kb/957310/en-us I do not know how to perform the steps in method 3, because I don't have a vista dvd.
Can you help me???
* Method 3: perform a repair of Windows Vista installation *.
* When you perform a repair installation, it restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.*
* To perform a repair of Windows Vista installation, do the following: *.
* Restart the computer
* Insert the Windows Vista DVD in DVD of the computer dur.*
* Note If Windows does not automatically detect the DVD, click Start, type
: \setup.exe in the search box, and then click Configure in the list programs. Then, click install maintenant.*
* Click go online to get the latest updates for installation (recommended). *
* Insert the product key if you are prompted for it.*
* Click to accept the Microsoft software license terms
* On the type of installation you want screen, click Upgrade.*
* When the installation is complete, restart the computer and try again to install updates again.*
I m a bit confused now
What exactly happens on your laptop? You can start Windows?
I think the article MS says it all: to repair Windows you need a disc of Microsoft Vista.
Alternatives to reinstall the entire system use the Toshiba recovery disc that contains a picture of the factory settings. Have you created this disk?
I have a "dv4-3029tx' and I installed Windows 8, wiping existing partitions of the drive (it will my recovery), and it would not start due to no available video driver.
I want to install Windows 7 from a genuine copy of Windows, no disc HP (that I have not and dat bloatware), but whenever I try, I get "a required CD/DVD drive device driver is missing".
Here are my options:
I can't order a new disc of HP (not for my model anyway)
I can't use Windows 8 (installs, does not start, BSOD)
I can't even install Windows 7
I can't use a recovery partition.
Anyone able to help me out here?
I solved the problem
It turns out that some USB ports require additional drivers. I swapped my thumbdrive to another path, and it is installed, no problem!
I tried to install Service pack 1, it failed due to an 0x800f0826 error.
I discovered that the Windows Modules Installer, which is required for installation, appearently doesn't work.
It is not listed in Control Panel > Administration > Services.
I tried running sfc/scannow in cmd high, and it does not work.
The TrustedInstaller file which is IS located in the maintenance folder in Windows, but I can't seem to run.
I also tried to download a registry Fix TrustedInstaller, but it does not help. I tried this solution with PsTools and the file psexec - no difference.
Also, I also tried to copy another TrustedInstaller in maintenance records, but that makes no difference either.
I really need help here. Is it possible to get the installer of Modules of Windows to work? Download a new version of the installer of Modules if it is corrupted? My computer is not shipped with a CD/DVD of Vista, so I can't run a Vista repair.
Please help me!
You see the effects of a hijackware infection.
Your quickest resolution would be to safeguard any staff data (which none should be considered 100% reliable at this stage) can do a format and clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:
5 steps to help protect your new computer before going online
Note: When you reinstall Vista, the free trial Norton will be also reinstalled (but invalid). You MUST uninstall it, and then rerun the removal tool Norton BEFORE installing a replacement AV app (e.g., F-Secure).
NB: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you can use to do the clean install. Contact the OEM manufacturer with this.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Windows update installation update 4 of 5 for 2 hours and did not finish. 28/10/10
What Windows version\edition you run the computer?
Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard > check if installation of update takes place more quickly
Step 2: You can follow the steps mentioned in the article below, which deals with a similar question
The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
Thank you, and in what concerns:
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Can someone give me a few steps for the sims3 on a windows vista installation?
Insert the DVD into the optical drive, wait until automatic execution appears, select Run Setup.
During the installation you will be asked for your key you will find on the booklet inside the DVD case. It will also go and get the EA Updater software so make sure that you are connected to the internet during the installation.
Whenever I run windows update, and try to install an update for Vista, I get the error message"
"Windows Modules Installer has stopped working and was closed"
. This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.
I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.
messages error 0x8009001d every time I try to download then says windows standalone installation does not
Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.
Try to do a reset:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Where can I get a copy of the Windows XP installation for my sister. His was a virus and I had to format the drive. It's a registered computer. I have it ready for the operating system but I need to download a copy so I can retrieve my CD-ROM/DVD-Rom drive, so I can then bring to its system and reinstall the XP and then if she wants that we can get a windows 8. I use windows 8 on this system, I bought a few months ago and it's satisfying, but I don't understand why when I got it I could do things like using the keyboard of the screen with my fingers, but now I can't even use the keyboard mouse. It won't work at all. In a way I found it better that way at the beginning because I do a lot of typing and it would freeze until I was constantly stressed. I returned to Windows 7 mode I think but not sure. All I know is that these two things have never worked correctly, so if they are still under warranty I will bring to the Future Shop and maybe they can fix it. I wish I could turn on and off easily so it does not interfere with my writing and study of a language second.
There is no legal download of XP unless a TechNet or MSDN subscription. I'm sorry.
Cracked Windows XP SP2 CD
I need to reinstall Windows XP SP2, but my windows XP installation CD is cracked and would not read. I have the product key and proof of license. Is there a way to download files from microsoft directly support installation using this information.
Windows XP Installer doesn't work is not for the automatic updates or MS Office 2010. Error says Safe Mode, but my machine is not in Mode without failure.
When I try to run MS Office 2010, it starts a dialog box "preparing to install...." "even if I had used it for a few years. In the end, it fails and tells me whether I'm in Mode safe or I need to reinstall Windows Installer, I have done several times.
I can automatically download updates and they seem to be installed, but all fail at the end.
Any ideas on how to address this problem? Yes, I know that it is probably recommended to buy a new PC, but I need this machine operate fully for the next months. Then by reloading the operating system does not, either. He told me that my XP disc is the wrong version.
Thanks in advance for any ideas.
Hello1. What is the exact error message that you receive?
2 have you made changes on the computer before this problem?
3. all of the updates fail to install?Method 1: Make sure that the Windows Installer service is not set to disabled.
(a) click Start, click run and type services.msc and press Enter to open Services.
(b) click the Windows Installer service, and then click Properties.
(c) if the startup type box is set to Disabled, change it to Manual.
(d) click on OK to close the Properties window.
(e) right click on the Windows Installer service and then click Start. The service should start without errors.
(f) click on the file menu, and then click exit.Method 2: Error message "Could access the Windows Installer Service" when you install a program in Windows XP
Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756Also note: Please, do not KB315341 (how to perform an upgrade on the spot (reinstallation) of Windows XP)Method 3: You can also download the latest version of Windows Installer from the link below:
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=enReference: troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation issues
original title: window on windows xp Installer
I have windows xp. Windows Installer does not and will not install updates to microsoft security is
Try to download and install Windows Installer from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=8483
Download WindowsXP-KB942288-v3 - x 86 .exe for Windows XP.
And security updates.
What is the error you get if you try to install updates?
You can specify the updates that are not install? as KB...
Check these items
You cannot install some programs or updates
Hope this helps,
Maybe you are looking for
Hello world! I just bought an airport Time Capsule 3 to and I thought it would be easier to set up as a NAS and backup. Could someone help me please? I work with OS X 10.10.5 Thank you in advance!
Hello Mr President I have a Qosmio F30. My CD/DVD drive does not work. I have the USB CD/DVD drive, but I think that F30 does not support external USB CD/DVD drive to boot to the top. Please help me. Now, how can I boot Windows XP CD?
I installed serial on my server of 540 RD, and I try to get my second rd540 and rd630 servers to connect to my EasyManage console. but I have problems with the WMI connections. I am running Windows Server R2 2012 on all three, I put the WMI on remote
Hello I'm trying NI 9269 voltage output. According http://digital.NI.com/public.nsf/allkb/5FDA9006283BB603862578B5006A80E7NEITHER 9269 can take the smallest resistance at 10 k ohms (it's a condition for NI 9263) but the value is not reported. What is
It does not have my phone I have a pantech breeze I want to face pictuer