Windows restarts by itself. Event Viewer says pushed user control.alt, delete or start button when I did not.

Similar Questions

• My Event Viewer says ATAPI: the driver has detected an error in the controller on \Device\Ide\IdePort1

  My computer (W7/64) sometimes fall to restart. I checked HD and the memory of Mrs. rescue disk - no error.
  Event Viewer says ATAPI: the driver has detected an error in the controller on \Device\Ide\IdePort1.
  The fact is that the cd-rom drive is behaving oddly. Reads the DVD of film without problem, but does not read floppy disks to install Windows (good on an another two comps).
  I therefore launched Verifier.exe and checked the other drivers. The result is dumpATA.sys is not running. (Is BTW not MS driver?).
  How can I force to load this driver?

  I checked the installation disc to compare the original version, boot.win opened, but the pilot is nowhere. Where did it come from?
  So I recorded the dump file, but the analysis of what this file is beyond my capabilities.
  Link to my file https://skydrive.live.com/redir?resid=4AF01405E5CE0354 dump! 114

  You could any body help me to find the source of my problem?

  Thank you.

  These are all good things:

  *****************************************************************************
  * *
  * Bugcheck analysis *.
  * *
  *****************************************************************************

  KERNEL_DATA_INPAGE_ERROR (7A)
  The requested page of kernel data could not be read in.  Usually caused by
  a bad block in the disk controller or paging file error. See also
  KERNEL_STACK_INPAGE_ERROR.
  If the error status 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
  This means that the disk subsystem has suffered a failure.
  If the status of the error is 0xC000009A, it means the query failed because
  a file system has failed to move forward.
  Arguments:
  Arg1: 0000000000000020, type of lock which took place (1,2,3 or PTE address value)
  Arg2: ffffffffc000009d, error state (state code of e/s normally)
  Arg3: fffffa80077f95b8, the current process (virtual address for the lock type 3 or PTE)
  Arg4: 0000000000000000, virtual address that could not be paged in (or the contents of the PTEs if arg1 is a PTE address)

  Debugging information:
  ------------------
  ERROR_CODE: (NTSTATUS) 0XC000009D - STATUS_DEVICE_NOT_CONNECTED
  DISK_HARDWARE_ERROR: Error occurred with disc material
  BUGCHECK_STR: 0x7a_c000009d
  CUSTOMER_CRASH_COUNT: 1
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  Nom_processus: System
  CURRENT_IRQL: 1
  LAST_CONTROL_TRANSFER: from fffff80002c7fcac to fffff80002c8bc00
  STACK_TEXT:
  fffff880 '03578-88 fffff800' 02c7fcac: 00000000' 0000007 a 00000000'00000020 ffffffff 'c000009d fffffa80' 077f95b8: nt! KeBugCheckEx
  fffff880 '03578-90 fffff800' 02c74ba7: fffffa80 '077f9550 00000000' c000009d 00000000 00000000' fffffa80' 077f95e8: nt! : FNODOBFM: 'chain' + 0 x 50080
  fffff880 '03578b 50 fffff800' 02c7e617: fffffa80 ' 07654b 50 fffffa80 '07654ba0 fffffa80' 077f9550 fffffa80 ' 077f95b8: nt! IopCompletePageWrite + 0 x 57
  fffff880 '03578b 80 fffff800' 02c8181d: fffffa80' 07654b 50 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiDeliverApc + 0x1c7
  "fffff880 ' 03578 c 00 fffff800 ' 02c4e4fb: 00000000 00000010' fffff800 '00b 96080 00000000 00000000' fffff800' 02c229a0: nt! KiCommitThreadWait + 0x3dd
  "fffff880 ' 03578 c 90 fffff800 ' 02c229fa: fffffa80 '07654b 50 00000000 00000001' fffffa80' 069ed040 00000000' 00000000: nt! KeWaitForGate + 0xfb
  fffff880 '03578ce0 fffff800' 02f29ede: fffffa80' 07654b 50 00000000'00000000 00000000'00000080 00000000'00000001: nt! MiModifiedPageWriter + 0x5a
  "fffff880 ' 03578 d 40 fffff800 ' 02c7c906: fffff800'02e06e80 fffffa80 '07654b 50 fffff800' 02e14cc0 00000000' 00000000: nt! PspSystemThreadStartup + 0x5a
  "fffff880'03578 d 80 00000000 00000000': fffff880'03579000 fffff880 ' 03573000 fffff880 ' 03578a 80 00000000 00000000': nt! KxStartSystemThread + 0x16
  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! : FNODOBFM: 'chain' + 50080
  fffff800'02c7fcac cc int 3
  SYMBOL_STACK_INDEX: 1
  SYMBOL_NAME: nt! : FNODOBFM: 'chain' + 50080
  FOLLOWUP_NAME: MachineOwner
  MODULE_NAME: nt
  Nom_image: ntkrnlmp.exe
  DEBUG_FLR_IMAGE_TIMESTAMP: 5147d9c6
  FAILURE_BUCKET_ID: X64_0x7a_c000009d_nt! _ ?? _::FNODOBFM:_string_ + 50080
  BUCKET_ID: X64_0x7a_c000009d_nt! _ ?? _::FNODOBFM:_string_ + 50080

  And this page explains what you have:
  http://msdn.Microsoft.com/en-us/library/Windows/Hardware/ff559211 (v = vs. 85) .aspx >
  (Short version of an argument 9 d: "0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective wiring or in bulk, termination or that the controller does not see the hard drive.")

  It seems to intimate that it's a hardware problem rather than a driver. You say that you are having problems with the optical drive. If you log out, you still have problems to restart or boot?

  This probably isn't a memory problem, but a better method of verification, it is with Memtest86 + http://www.memtest.org/#downiso>
  Download the ISO and then create a CD with it and boot from it. If you have more than one piece of RAM, pull all but one test, then close, replace it with another and test, etc. I find it a little faster than the test at a time.

  SC Tom

• the Welcome window in startup turns until I have press control / alt + delete

  Welcome to the startup window hangs until I have press control / alt + delete

  You can start in Safe Mode with command prompt ?
  If Yes, safe mode, do a file system check...

  Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• My Windows telling me that he needs 11 updates. These updates consistently fail and the Microsoft fix did not work. Error codes are 641 and 80070641

  My Windows telling me that he needs 11 updates.  These consistenly updates fail and the Microsoft fix did not work.  Error codes are 641 and 80070641.

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Method 2

  You can reset the Windows Update components.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Method 4

  Step 1:

  Place the computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Step 2:

  You can manually download and install updates from Microsoft Download Center.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 5

  You can disable temporary of your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Only windows 7 can set the image of the user that appears in the start menu you can not change it. True or false?

  Is true or false. Only windows 7 can set the image of the user that appears in the start menu you can not change it.

  Set to false.

  Type the user accounts in the start search box.

  Press ENTER.

  Select change your image.

  Browse the picture than what you want.

• Windows Fax and Scan/Event Viewer

  I have 2 issues that I believe are interdependent.

  I am running W7 x 64 edition family and until recently and scanning worked perfectly but suddenly stopped. Now the application does not show my internal Modem (soft) or my external Fax Modem - that are displayed in the device (with no problems) Manager. The App said No accounts set up, and when I try to accounts 'Add', nor the modem show and if I try to ' add by using a name, I just get a statement of error message "the mentioned fax server is not available"... telling me to try again later."

  When I first set up fax and scan, I just plugged my Modem Fax (new) and when I went to add accounts - the two Modems showed. I simply took the external Modem and everything worked fine - now none of the Modems are recognized.

  I tried the remedy of re-fax service under control panel of configuration/administration/services etc... is indifferent.

  I looked at a lot of positions since 2007 and this seems to be the problem well documented and a pending problem resulting from an update of Windows, but it is unclear which.

  Of all the posts I've seen, it's a well known error / well documented that has not already been corrected.

  At the same time, my event viewer does not work - when I try to open it, a message simply says "Service not available event log. Verify that the service is running.

  I try to run the service and "starts and stops"... In any case, among the thousands of posts on this topic and also I tried remedies including remove/rename the Windows/system32/LogFiles/WMi/RtBackup

  I think remember me one saying the 2 problems are interrelated. Any ideas?

  Hi Gerry,

  No, I have already gone through Device Manager and no device No. Bad shown.

  Yes, I used fax and scan before several times on my x 64 system and it worked fine until recently.

  HOWEVER, "good news".

  I found a site called http://tools.sysprogs.org/srvman/ SYS PROGS

  The site has a small standalone application called srvman that I downloaded and it allowed me to launch the event log / event viewer / Fax - which none could start the Services on the right menu by clicking on the selection and selection automatic (or manual) and then start. Each of them would start and then stop.

  In any case, they began with this app and then Windows Fax and Scan App and still no joy.

  I then went to "Turn Windows features on or off" and of selected Fax and Scan and printer Opps, then re-selected them (I had tried this method a few times before without success)...

  Restarted the computer and the events/event log viewer / fax and scan works very well... (only thing was Fax and Scan doesn't seem to see my external Fax Modem (soft) modem internal but recognized and 'Fax account' remained together upwards, so all good to go.)

  Thanks for your help... your directions encouraged me to keep plodding on this issue frustrating and eventually got somewhere - but by "Good luck" more than my own 'good management' :-)

• Unable to activate Windows XP Professional and Microsoft support says that it is because I am running SP2 and it is not supported...

  original title: activating xp

  RELOADED xp pro and got the activation of the screen where I clicked Yes to activate, but it won't all still talking to microsoft and because it of sp2 that they do not support it and told me to come here. Any ideas on what I can do next

  Try once more, if you still no help then see the info below on creating a slipstreamed XP CD that incorporates the SP3)

  How to activate Windows XP (http://support.microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the letters and numbers (number 8 for the)
  Letter B, etc.).

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Users of Windows XP - Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  -------------------------------------------------------- Also -----------------------------------------

  Create a "Slipstreamed" of integrating XP SP3 version then activate XP
  AutoStreamer, it is easy to use and for the most part explicit.
  After you create the CD then do a "clean install", see the last part
  My response.

  Guide auto Streamer and Download Sites:
  http://www.simplyguides.NET/guides/using_autostreamer/using_autostreamer.shtml
  http://fileforum.betanews.com/detail/1092632287/1

  Where to download SP3
  (This file that will be used to created the slipstreamed CD)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

  Create a version Slip Stream of Windows XP with SP3
  http://www.webtree.ca/WindowsXP/slipstream.htm  (With the help of AutoStreamer)
  http://www.theeldergeek.com/slipstreamed_xpsp3_cd_final.htm
  http://www.winsupersite.com/showcase/xpsp3_slipstream.asp

  How to create a Windows XP SP3 slipstreamed CD
  http://www.PAGESTART.com/slipstreamsp3.html

  You create the slipstreamed CD will not include specific drivers
  for your motherboard, video, audio, network, etc...  Those who you will be
  need to download to your PC or motherboard manufacturing
  Web site.

  How to do a clean install of Windows XP
  Start by changing the BIOS setting to start from the CD drive first.
  Then see below:

  Michael Steven: http://www.michaelstevenstech.com/cleanxpinstall.html
  more information: http://windowsxp.mvps.org/XPClean.htm
  and: http://www.theeldergeek.com/clean_installation_of_windows_xp.htm

  How to optimize your chances of Windows XP SP3 Setup successfully:
  http://www.PAGESTART.com/windowsxpsp3p3pg8.html

  J W Stuart: http://www.pagestart.com

• close the option to stop/restart/switch users is missing from the Start button

  For some reason, I have more option to stop/restart/switch user under the Start button. The lock button is there with an arrow, but the only option under this arrow is LOCK. How do I return these options? The only way I have to shut down the computer now is to use the button on the computer itself.

  Simple terms only, please. I am a newbie of Windows. Thank you.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista has completely disappeared from my laptop. Now I have no start button, or all the icons? Oh I get it back?

  I got a box to say that he had a problem, so I clicked on OKet now vista disappeared from my laptop. I can still access my e-mails and the internet, but have no start button, or the bits of information like the battery, login etc. information time.

  Any help on how to get all them would be greatly appreciated.

  You are taskbar can have dissappeared. To see if it is still active, try pressing your keyboard Windows key (looks like this:). If the boot menu appears, your taskbar just hides. Answer with the info on what happened.

  Rifdhan

• Disable the control key for the Start button in Windows XP

  Hello. I would like to turn off command for the Start button (I mean the left button located on the bar of Windows XP tasks); How can I do? Thanks in advance.

  PS: I use VMware Fusion for mac 2.0.1 and the virtual machine is Windows XP SP2 32 bit. My operating system is Mac OS X 10.5.6 (Leopard).

  I tried a long time ago and it didn't work.

  I was annoyed, but this thread made me take another look.

  Try this:

  map the command/apple key control rather than delete the assignment.

  It also fixed annoying command + s failure to save most of my applications.

• After installing the updates, event viewer says "Some of the updates are not applicable for this system"

  I have a laptop Toshiba Satellite L355D-57901.  I am running Windows Vista Home Premium SP2.  I have the updatedWindows updates in place so that I can revisit before installing.  After you install the updates, I noticed for some time that when I check myEvent Viewer , there are several errors indicating that "Windows Servicing identified that package (the number of update i.e. KB980436 (security update) is not applicable to this system .).   Can you please tell me why?  Thank you very much.

  Hi Simply4real,

  Check out the link below to a thread with similar problem and check if it helps.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/c6883a0c-FF12-4bcd-86e0-4af3006eb7ce/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Software Windows XP security 2012 kidnapped by saying I was might be infected by the virus 20 and would not allow me access to the web, but wouldn't buy the new. WAS - THIS LEGITIMATE?

  I have mcafee - and xp said I was infected

  Hello

  Your system is infected with the virus, update your Mcafee and run a full scan of the system in safe mode. You can also try to download Anti-malware http://www.malwarebytes.org/ and scan your system in safe mode.

  To start your computer in safe mode, you must press the F8 key before the windows screen is loaded (time between the BIOS screen disappears and before you get the windows screen).

  Once you get your system clean everything in safe mode, restart your computer, should be all good.

  I hope this helps.

• iPhone 6 had turned hot itself to present back on, it has been on charge all night as it happens still does not light and I tried pressing 2 buttons and that did not work

  IiPhone 6 hot and turned off I left it to cool then tried to put this failure, which held the House and out dressed this also failed, put in charge all night long tried the keys again this morning, which has also failed

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• BlackBerry smartphones require a PDF Viewer - how to get the premium version of the ToGo apps when I did not have a TELUS data plan

  Hey all the...

  Is it possible to download and install a premium version of the ToGo apps (or just the PDF viewer component - I searched this term and found a relevant thread in which sdgardne had referred to the award-winning apps ToGo) on my device from an executable installation in the Windows environment?

  Or at least get the file required on the device via Windows?

  Thank you, FFF

  Hello

  Well, one way of course would be to pay for the level of bonus ToGo apps... you ask for 'premium' service, and it is rarely free. You can read about the methods here:

  • http://www.DataViz.com/DTG_blackberry.html

  If your BB is sufficient to accept a 7 OS version, then that includes the complete Premium ToGo apps. You have to do a few tricks to install it, because you don't have a data plan, but it can be done. I suspect, however, that your BB is too old for OS 7, so that leaves the method "you pay for it."

  It can be many other paid apps to do what you want... you should, of course, the search options and make the choice that best fits your needs.

  Good luck!

• When I start Firefox, no Web site opens. He says that's not available. Internet Explore works on web sites. I deleted and reloaded Mozilla and it did not help.

  It started about 2 weeks ago. The homepage is Cox and he said initially that the web site was being repaired. Now whe Mozzilla is open, a message appears that the site is uavailable. By clicking all bookmarks results in the same message. The message appears immediately after the button enter is pushed.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls