Windows Resume Loader black screen on HP Pavilion dv4-2145 dx laptop Windows 7

I have a HP Pavilion dv4-2145 dx laptop with Windows 7. After pressing the button "on", the logo operation windows says its "recovery" windows, but a black screen titled "Windows Resume Loader" appears with the following message:

The last attempt to resume the system from its previous location failed. Attempt to resume again?

With the 2 following options:

1. continue with system summary, (which does not work and I end up with the resumption of the "Windows" followed a blank black screen...)

2 Delete restoration data and proceed to system boot menu (I haven't ' truei stops because I wasn't sure what that meant)

But I managed to go to the reviews section diagnostic systems and it seems that he pass all 5 of the test, including hard drive and memory, poster, etc. So I don't know what the problem...

Please notify.

Thank you very much!

Hello

I think that in this case, you will have to choose the second option - "Delete restoration data and proceed to system boot menu" and see if that fixes the problem.  If all etc. documents you had open before hibernation were saved, then you should not lose anything.  If there are unsaved changes (for example if you have added to a document), the file will be to the point that his last record and you lose additional data.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • MacBook Pro 15 10 bootcamp load black screen Windows

    When I try to load windows on my computer 10, after stopping the wheel spinning, I'm left with a black screen and occasionally the cursor. I was wondering if anyone has a solution because I'm very reluctant to release zero/restore my windows partition as it was working fine before the next time I turned on the computer and other forums seem to lean toward a display problem. Thanks for any help

    Do you have any active Windows automatic updates?

  • Windows Vista won't load - black screen each laptop time starts

    I have a Dell Insipron 1525, which does not load Windows Vista.

    I can't go past the Recovery Manager screen every time you start, and although I tried all the options available, it does not open in safe mode or normally.

    I tried the system restore (even if it says that it cannot find valid 'points'), as well as the repair of the system, and I have also run the Diagnostics, who said there is no error (although I could not see the final report). All paths lead ultimately to the black screen and although I can see and move the cursor, it is that I can get. Any ideas please?

    Thank you very much!

    Hi ZD_123,

    ·         Did you the latest changes on the computer?

    ·         You receive an error message?

    I suggest you follow the provided article and check if it helps.

    http://support.Microsoft.com/kb/946532

  • Stuck on Windows Resume Loader quick screen with USB keyboard, so I can't answer

    Windows Vista has not recovered to sleep, so I turned off computer and rebooted.  Now, I get the message Windows resume Loader

    "The last attempt to resume the system from its previous location failed. Attempt to retake?  Continue with the system summary or remove data restoration and menu system start-up. "

    I have a USB keyboard so I can't use the arrow keys, or enter key, so it's just sitting there. My computer has no PS/2 keyboard entry. I tried to hit the F8 key on startup (as well as the F12), but I can't get another screen. How to answer the question with a USB keyboard?

    Found the solution. Keyboard has been plugged into the USB port on the monitor.  Cable keyboard switched to the USB port on the computer, and then click keyboard worked, so I could answer the question. I chose "Delete restoration data and proceed to system boot menu."  Everything works fine now.

  • Satellite L40 dosen't load - black screen

    When I turned on my laptop today I just had a black screen.
    Says battery fully charged, but if I turn off the power the light disappears.

    The led drive usually flickers, but is it not also.
    Can someone please?

    I tried to install Windows to new cd Vista recovery disk and it worked for 2-3 days then the same problem black screen nothing works!

    Please help me I have not installed any hardware or changed any material!

    It is a toshiba Satellite L40

    Thank you

    Hello

    You should try to first remove the battery and disconnect the power adapter for about 20-30 min. after that time reconnect both part and try to start Notepad.
    Usually, this should help to restart the laptop.

    In addition, a BIOS update must be performed.
    I read that a BIOS update resolves many strange problems and that I myself remember the black screen problem could be solved also.

    So check it out and good luck

  • Ubuntu to load black screen

    Hey, I have recently updated mate ubuntu in vmware workstation 12 mt and now it loads just a black screen. I'm not familiar with virtual machines and do not know how this approach other than to make a new virtual China me, which is obviously not preferable.

    Please refer to the comments of Ubuntu does not start after the installation of updates

  • YouTube load black screen for the first five seconds

    As of the beginning of January 2013 in Firefox, videos YouTube are responsible as empty black screens for the first five seconds. 0:06 mark, video begin to play normally. This isn't a problem in Chrome or IE. Tested with all plug-ins and Add-ons disabled (except Flash player). Plug-ins/add-ons custom updated. Tried to reinstall Firefox without solution. Help? Thank you!

    You can check the problems caused by the recent updates of Flash and try these:

    • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
    • disable the safe_mode in Flash 11.3 and later versions
    • turn off hardware acceleration in the Flash plugin
  • Black screen on Hp Pavilion dv7 Notebook

    I had my Hp dv7 notebook for a few months now and have had no problems. But all of a sudden, I turn on the computer and see nothng but a white, black screen. I don't know if I changed the display settings or what, but I do not see anything. I know that the computer is running because the fan starts and the lights on the keyboard are working. When I connect my laptop to an external monitor, I was able to find that my computer was on and fully functional. In fact, I use it now on an external monitor to type this message.

    I was wondering if I made a stupid mistake, or if it's something serious, please help ASAP

    Thanks, Mike

    Hi Mike,.

    If you press f4 you see a menu on the screen with the options ' computer only; Two copies; Extend; Projector only "?"  If you do this, use the arrow keys to select duplicate , then press ENTER.

    Now nothing shows on your laptop screen?

    Let me know before going any further.

    Kind regards

    DP - K

  • No volume screen for Hp Pavilion Dv4 (2011)

    This is the first time I had an Hp laptop and I just noticed that there not display when im changing the volume using volume keys, it works and all but just no display on the screen so I have to manually check the volume level.

    Same question about the brightness setting, I think it would be much easier to check the level of volume and brightness, if she had an on-screen display.

    Is it normal that my laptop? If this is not the case, how can I fix it?

    I have a HP Pavilion Dv4 2011 edition, running in Windows 7 Home Premium 64-bit.

    Help please.

    Hello

    Although not specifically for your laptop, try to download and install the HP OSD utility on the link below.

    http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52956.exe

    After this Setup is complete, restart the laptop.

    Kind regards

    DP - K

  • HP pavilion dv4 (1287cl) computer laptop laptop gets hot and does not load then

    Hi guys, my hp pavilion dv4 1287cl gets hot and the fan emits noises.
    WHN it has fully charged so I remove the plug charger and it's cold as hell. This only happens when it's warmer and the fan makes noise that is made all day.i use for programming and playing games like minecraft. also it is not sometimes load when it is warmer more when the fan is the production of abnormal voice.

    I'm started to get upset with that I had broken the screen and keyboard (but had then replace them) because it makes him angry.

    I live in pakistan so u kn on load shedding and the electriccity turns off like after like every 8 hours and it freezes.

    Please help me guys.and thanks for reading this story together soft

    Hello

    Click on the link below:

    The fan runs constantly, the PC is running more slowly than expected and generates heat

    Note:

    We suggest that you should try to update the Bios.

    The update of the Bios?

    Download the latest update of the Bios for your model specific here.

    Connect the power adapter to the netbook.

    Disconnect from the Internet. Close all running programs. Disable anti-virus and firewall.

    Double-click the Bios update exe file. It may take some time, so it is important to remain patient, not to interrupt the process. Allow the laptop to restart after applying the BIOS update.

    Although this update is running are not:

    • Turn off your laptop,
    • Disconnect the power adapter,
    • try to run any software or do anything on the laptop.

    Note:

    The Bios update process is always risky. You do this at your own risk.

  • Blue screen on HP Pavilion dv4-1115ef

    Dear all

    I have HP Pavilion dv4-1115ef laptop.

    It was working fine. I have properly stop but the next day that I was not able to start my laptop.

    There was a message that there is a problem and start the machine in normal mode or initiated a start.

    Start mode, there was blue screen, but I'm not able to start my laptop.

    I have a lot of data that I want to retrieve all the data.

    Please suggest me the best option to get my phone in workng position without losing any data.

    Thank you very much in advance.

    Thank you very much.

    I'll try that.

  • black screen on HP Pavilion laptop

    After installing an update from Microsoft, my HP laptop suddenly went black and would not restart.
    Have tried rebooting in safe mode and may come to the point where I chose "start in safe mode" but the laptop does not start.
    The screen stays black, but there seems to be something in the hard drive.
    Is there a way to fix this without spending on the recovery disks and lose all my data?

    If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If you need to save the data and reinstall.

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.

    Mick Murphy - Microsoft partner

  • Partial blackBerry smartphones load black screen

    I need help with my Blackberry 9700.  I noticed that he had a blank screen and was unresponsive, so I pulled the battery with no luck.

    It shows the loading screen (with an initial red LED) for 90% of the way and then goes to a blank screen.

    No lights are on, and no noise alerts are heard (I tried to take a picture to hear the click).

    One thing that I had not noticed before was the double arrow in the upper right, which I think is the icon of send/receive.  When it displays in the top-right corner, it is extremely distorted, and then seems normal shortly after.

    What should I do?  I am away from home for the evening and could not connect to the Desktop Manager.  But is this my only option now?

    Thank you!

    Hi and welcome to the forums!

    I think your best bet for the device OS. Make sure you get a complete backup of your device using the desktop software, before recharging.

    Thank you

    Bifocals

    KB11320 How to perform a clean reload of the BlackBerry Device Software for Windows

  • black screen of HP pavilion g6 doesn't initialize-go to top.

    HP pavilion g6 1d63nr-ram; hard drive; fan; power light have all be checked right after trooubling with the information provided.

    I have a reminder plug LS - 15 (need Rreplacement) this could be the problem?

    Is their damage to the motherboad?

    Hello

    Looks like you have already done some great troubleshooting. Here is a document that could have a step that you have not yet tried:

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c01997899-4%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    Good luck!!

  • CP5 - W7 - film not loaded - black screen

    Hi all Captivaters,

    For the first time in my life, I have encountered this problem.

    A caprivate priview/publish cannot load its own swf.

    A normal project, among several other projects with the same settings I have all projects cannot load all of a sudden?

    I searched the Forum but did not find any other captivater with the same problem.

    I am ready to send my project to Captivate 'central' supported if they want to study and they are happy for all the advice I can get.

    Here's what I can be if I saw (F12) or post it to an LMS or publish on the desktop or in EXE (media).2010-11-09 10-00-26.jpg

    Some settings that I think would be useful to know.

    Setting 1 Setting 2
    2010-11-09 10-13-57.jpg2010-11-09 10-14-21.jpg

    Thanks to advanced

    Daniel

    This problem has been resolved and the measures to apply the hotfix is described in the http://blogs.adobe.com/captivate/2010/11/solution-for-cp5-content-not-working-with-the-latest-flash-player-version.html blog post

    Please note that, after you install the hotfix, you must re - publish your projects captivate with text animations. Please let us know the results.

    Thank you
    Vish

Maybe you are looking for

  • Driver for DVD ROM SD-R1312 need help

    After moving to another apartment, I lost my driver CD Toshiba DVD. Without it, I can't use my DVD more. Please help me. I looked across the Net and in the Toshiba Download Center, but I'm not. DVD ROM SD-R1312 Driver can send to:[email protected] Tha

  • How to play movies from my pc on NSZ - GS7

    On my PC, when I open Windows Media Player, I went to the stream, and I gave permission to access NSZ - GS7 to play media from my pc. But when I go to the NSZ - GS7, I don't know where to go to see the movies on my pc to play on my TV. Thnks!

  • extended Zoo Tycoon marine mania

    We loaded the original Zoo Tycoon (who runs with Directx 8) wih no problem with Vista64.We downloaded the disc Zoo Tycoon Expanded (Marine Mania).Now we try to run it we receive error message "You must have Directx 8.0 or later version to run Zoo Tyc

  • How I not know who...

    Intel Wireless WiFi software or network PRO / WirelessI use?

  • How to recover data to a dvd - r backup system

    Several months ago, I did a full system back up to 3 DVD-R discs.  My hard drive has failed, and after I replaced it I download data on the disks of backup to my computer.