Windows root.\system32\hal.dill. is missing and I dot no what to do

Similar Questions

• Windows root system32\hal\dll. missing or damaged

  can not turn on computer says cannot access windows because windows root system32\hal.dll. is missing or damaged.  How can I fix it

  Hi piccard49,

  Follow the steps listed in the links below:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem":http://support.microsoft.com/kb/314477

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer:http://support.microsoft.com/kb/330184

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message: missing or corrupted: [Windows root]\system32\hal.dll

  We bought a new pc with Windows 7. My autocad program is not compatible with this op system so I kept the old pc and plan to use it for autocad only. When I tried to boot the old pc, the following message appears: "Windows has not start because the following file is missing or corrupted: [Windows root]\system32\hal.dll.» Any have a solution outside shoot the operator?

  Hi DickBernhardt,

  These articles may help:

  How to fix System32 Hal.dll:

  http://www.ehow.com/how_6184909_fix-System32-HAL-DLL.html

  How to perform a repair of Windows XP Installation:

  http://pcsupport.about.com/od/OperatingSystems/SS/instxprepair1.htm

  How to restore Hal.dll from the Windows XP CD:

  http://pcsupport.about.com/od/fixtheproblem/HT/restorehaldll.htm

  I hope this helps.

• black screen that says missing or corrupted file windows root\system32\hal.dll

  Original title: Media Center m470n

  I have a Media Center m470n. On startup, I get a black screen that says file missing or corrupt

  (windows root\system32\hal.dll). How can I fix? I have 10 disc that came with the system, what steps should I take just reload this file thanks

  Hi Albt,

  Do you remember any changes made on your computer before the show?

  What is the service pack installed on your computer?

  Follow the steps listed in the links below:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem":http://support.microsoft.com/kb/314477

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer:http://support.microsoft.com/kb/330184

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows root > \system32\hal.dll error on a laptop without cd player or cd when bought

  Hello

  Got a problem. My daughter has a laptop HP with Windows xp. She did a disk defragmentation and clean last night... today, when she turned her on she received a Windows root>\system32\hal.dll error message. We do not have a CD to restart from... and it has a CD drive in the laptop. I can't find how to get to the system restore point... Ive tried f10, f12, f9... r. I also went into the BIOS and there is only one option it to boot from... any ideas? any help would be great.  17 am very angry. Thank you!

  Hello

  Got a problem. My daughter has a laptop HP with Windows xp. She did a disk defragmentation and clean last night... today, when she turned her on she received a Windows root>\system32\hal.dll error message. We do not have a CD to restart from... and it has a CD drive in the laptop. I can't find how to get to the system restore point... Ive tried f10, f12, f9... r. I also went into the BIOS and there is only one option it to boot from... any ideas? any help would be great.  17 am very angry. Thank you!

  Fortunately, not all is lost here for you. You have several options. You will need to create a CD of the utility. (1), you can boot from a usb flash drive and run utility Cd or 2) you can buy a removable usb device cd rom and there. It's the best option, but instructions differ radically, so I need to know which is your choice of boot options to help you. You won't have a windows disk to perform the procedure.

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• SE error message: Windows has not start because the following file is missing or damaged. Windows root\system32\hal.dll, after removing the RAM

  Original title: computer \sysytems32|hal.dll shows this when starting. Old dimension 2350.

  I tried to install McAfee Total Protection on an old Dimension 2350 and after that computer system has been slow and useless. After the call of Mcafee, they told me my RAM was too small at 640 MB and said if necessary to upgrade to 1 GB. I called Dell and they wanted to know that the RAM so had to remove it. After removal and reinstallation of the computer, but I got the error above.

  I have the reinstallation windows xp cd drive professional service pack 3, but can not get beryond this message options

  Hi gfritz1,

  You can consult the following Microsoft KB article and check if it helps:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ErrorWindows could not start because the following file is missing or damaged. Windows root\system32\hal.dll where can I find? How can I fix error?

  I turned on the PC and you have question.  I am disgusted.  Now what should I do?

  I turned on the PC and you have question.  I am disgusted.  Now what should I do?

  Please follow the instructions below. If you do not have your windows disc follow instructions on the link below to create a bootable recovery disk console and then return here and continue with these instructions.

  1. Insert the Windows XP CD in the CD-ROM drive and restart the computer. If you are prompted to press any key to boot from a cd do;

  2. when the "Welcome" screen appears, press R to start the Recovery Console;

  3. If you have a dual-boot or multiboot, select the installation that you must Access from the Recovery Console.

  4. When you are prompted, type the administrator password. If the administrator password is blank, just press ENTER;

  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k). Let the scan to run until the end;

  6. to exit the Recovery Console and restart the computer, type exit at the command prompt and press ENTER.

  Once the scan is complete, restart your computer.  View your results.

  How to make a disc bootable windows Xp recovery console.

• (root)\system32\hal.dll windows error

  I have an old laptop Dell Latitude.  Think he has Windows 2000 Professional on this topic, but not sure. Can not find the original disk. When startup it comes up with an error message (error of windows root)\system32\hal.dll. How should I do?

  Try this: http://support.microsoft.com/kb/945380

  or

  http://lmgtfy.com/?q=HAL.dll+error

  Or search in the Windows Forum using the error hal.dll as your setting.

  Good luck...

• Error starting: < root Windows > \system32.hal.dll file missing or corrupt

  I used the Norton Utilities 15 on my Win XP = done many times with no problems, this time however she appeared with\system32.hal.dll file missing or damaged asking to reinstall a copy of the above file. F8 opens but doesn't correct; for example, in safe mode and the latest version of work etc does not work as always guests return to error. \system32.hal.dll missing or damaged file asking to reinstall a copy of the above file.

  I have no Win install drive as it came preoaded on my computer.  Is there anywhere I can get this file to replace or am I stuck with my recover the DVD file erase all my personal files/photos etc.?

  Hi KevinHassin,

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• OS does not start and screen with the error (root) system32\hal.dll windows is damaged or missing black

  I was trying to stop some HP programs to start when I start my desktop computer. I did the following: start > run > msconfig.  Click on startup and unchecked HP four applications. Restarted my desktop computer and immediately had a black screen with the following message:

  The window could not start because the following file is missing or damaged:

  system32\hal.dll

  Please reinstall a copy of the above file

  I can't do anything in Safe Mode or one of the other options. Cannot re - install Windows XP Home Edition because Windows or Internet Explorer 8 will not run. Only the black screen and the message mentioned above.

  I use a desktop Dell Dimension 8400 computer.

  [1] Just finished everything on your step 10. I went with the Microsoft Security Essentials.

  [2] I still need to download site driver Dell trying to correct this "floppy seek failure pilot 1,2 and 3 not found: ATX, SATA 1, 2 and 3' problem"

  [3] I just got e-mail from Microscoft response that the thread that I created has been deleted, so I answer to you of a past replica.

  Wanted [4] Thank you for your time and patience to help me. Is there something else to do for me, you can recommend?

  A1. Wise move IMHO. The computer seems "snappier" now?

  A2. I can't imagine that another owner of a Dimension 8400 (or 4800?) has not encountered this problem before. Discover (i.e., search) the Dell office equipment forum: http://en.community.dell.com/support-forums/desktop/f/3514.aspx. If necessary, start your own new thread (registration required).

  A3. If you start another thread on the computer, I have posted a reply to this & you asked to publish a follow-up replies to your original thread. [?]

  A4. Welcome & thank you for your comments.

  In fact, there is something else you may need to do: it turns out that KB2607712 is replaced by the KB2616676 in Vista & Win7; Windows XP needs to have both installed [despite the mention you referred in your post on September 14, above] !!!

  => So if Update for Windows XP (KB2607712) is NOT listed in Add/Remove Programs, you will need to manually download/install a revised version [long story, involved - you don't want to know]:

  ~~~~~~~~~~~~~~~
  ACTIONS:

  1. open Internet Explorer to http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=27244 & click on the button CONTINUE.

  2. after VALIDATION, download the installer for KB2607712 & save it to your desktop - NOT run again!

  3. close all open applications (that is, anything with an icon on the taskbar).

  4. double-click on the file that you saved in #2 above to install the update. Follow all the instructions (reboot required).

  5. check that the Update for Windows XP (KB2607712) is now listed in Add/Remove programs.

  ===============

  PS: If you have NO Office or Silverlight or any installed Windows Live Essentials application, I can tell you how to start your Windows XP computer & full load more quickly.

• < root windows > damaged \system32\hal.dll ___Please recharge.

  I tried to use System Repair on my Windows XP disk, but could not get it to list the programs that it contained so that I could reload file without having to initialize my hard drive, destroying all the data and the programs it contains.  The system error prevents me from getting to the Internet.  Do you know if there is a way to fix the error without having to wipe my hard drive?  Thanks in advance.

  Hello

  I suggest you follow the steps mentioned below.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Error - system32/hal.dll is missing after the installation of updates.

  Original title: updates destroy xp installation.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: i'm trying to reinstall xp sp1 on an old toshiba laptop (m35-s456).  After installation and the installation of sp2 and a bunch of KB, reboot xp will not charge and comes up with an error saying the system32/hal.dll file is missing.  no idea why an update would impact on this file?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi derek45,

  The updates you have installed Service pack 1 and 2?

  This problem may occur if the Boot.ini file is missing, damaged, or contains incorrect entries.

  You can follow this link and check if the problem persists.

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S

• After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally? What other steps should I take in Mode safe?

  After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

  Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

  I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

  I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

  XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

  Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

  After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

  Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

  I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

  I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

  XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

  Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

  System Restore IS NOT the way to remove malware. The reason why you do not see the effects of the malware in safe mode is probably due to the fact that the process for most malware does not load in safe mode, and therefore not active.

  Restart the computer in Safe Mode with network. Click HERE. Download Malwarebytes. Update Malwarebytes and perform a full scan.  Choose to quarantine found nothing. Once completed click HERE and download Superantispyware Portable. Run a full scan quarantined found anything yet. Restart your computer in normal mode and perform a quick scan with Malwarebytes.

• whenever I try to burn a cd with windows media player, a blue screen appears and restart my computer, what should I do?

  whenever I try to burn a cd, my computer goes to a blue screen and restarting my computer, what should I do?

  Hello

  Most likely, there is a problem with the CD/DVD drive. You can burn a data disc when
  don't use not WMP? Close all programs, put in a flammable disk and use the data method.
  If burning a data disc works then you have any add-ons for WMP12?

  -----------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• Free download windows root system32/ntoskrnl.exe

  My pc using windows XP Home Edition will not start massage says file missing or corupt /system32/ntoskrnl.exe is it possible to download this file on a cd on a different pc and install the file in the pc easily?  Thanks for any HELP!

  Hi LorraineParker-Jackson,

  ·         What is the number and the model of the computer?

  ·         Do you remember any recent changes made before the show?

  ·         What is the service pack installed?

  I suggest you follow the steps in the link below and check if it solves the problem.

   

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  I hope this helps.