Windows Server 2003 detects no audio device

Similar Questions

• Impossible to delete mutiple audio codecs installed in windows server 2003

  Hello

  I'm having this problem ~ impossible to delete mutiple audio codecs installed in windows server 2003. When we duplicate the record of voice on windows xp, the sounds and ignored the reading. But playback under windows vista and windows 7 has been authorized. Can someone help... THX in advance

  azma_yusoff,
  Because your question Server 2003, you need to post in ourTechNet forums. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need driver Audio for Windows server 2003 for the INSPIRON 1545 laptop

  Hi all

  I need Audio and video drivers for my new laptop computer Inspiron 1545 laptop. It now supports drivers for Vista, XP and Windows 7 only.

  I installed Windows server 2003 to install SAP. But I am unable to get the sound.and not able to install video and audio drivers.

  Please help me how to get these drivers.

  Thanks in advance,

  Delphine.

  Delphine,

  This is how it was done before Vista. There could be a better way now.

  1 enable the Windows Audio Service. (This should already be activated in 2003 Standard Edition). For other versions:

  Go to start/run and type "services.msc" and press the 'Enter' key (or click on 'ok'). The Services window appears. Scroll down the page until you find "Windows Audio" to the bottom of the list. Double-click on it and change the type of startup to automatic, and then click Start, apply, then OK.

  2. download and install the Microsoft Windows Server 2003 KB901105 update from this page of Microsoft:

  http://support.Microsoft.com/?kbid=901105

  3. restart.

  4 install the audio driver for Windows XP. If you have trouble to install it using Windows XP compatibility mode.

  5. set the hardware acceleration DirectX:

  Click Start/run and type "dxdiag" and press the 'Enter' key (or click on 'ok'). Go to the Audio tab and move the slider to 'Level of hardware acceleration Sound' at full speed.

  (Thanks to kovacsAtTiLa of a site called west - wind.com.) He posted critical information, the link to the patch from Microsoft).

• What is the difference (other than the device/user limit) feature which would prevent me from installing this new software on Small Business Server 2003 R2 SP2, which 'requires' Windows Server 2003 Std Ed & SQL 2005 Std Ed 32bits. ?

  Need to install new software to the main application. Software provider said Windows Server 2003 STD. Ed. (32 bits) and Microsoft SQL Server 2005 32-bit Standard Edition, Cumulative Update package 8 for SQL Server 2005 SP 2, MDAC 2.8 or later.  We have Microsoft Windows Small Business Server 2003 Standard Edition (SP2 R2).

  Software publisher made a special note that 'Microsoft SQL Server sent as part of Small Business Server is not supported. Please contact us for more information about SQL Server Enterprise Edition. "(contradiction?)

  • Small business, fewer than 10 users.
  • Don't use do not Exchange or IIS part included in SBS 2003.
  • I have access to install SQL 2005 Std install/replace on Small Business SERVER 2003

  Hi copenetadmin5,

  Thank you for visiting Microsoft Answers. SQL Forum, I think, would be the best place where you can discuss much more on the above query. Please visit the link below to find a community that will provide the support you want.

  SQL Server forums

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

  Nice day.

• Upgrading to Windows Server 2003 Standard Edition

  I buy a Satellite M30x and for work, install Windows Server 2003. But the two devices was not recognized (PORT COM, SERIAL PORT?), no driver has been found. Someone has an opinion to solve this problem. In Device Manager, there are 2 system device Base System (?).
  Thank you

  Hello

  I think Toshiba does not support drivers for Windows Server 2003 for all laptops!

  So the only thing you could do is to try the drivers XP (utility chipset) or search the net en some drivers available!

  Goodbye, Sam

• Satellite A200 - Installation of Windows Server 2003

  Dear Sirs,

  Recently, I bought a toshiba Laptop which has Vista Home Premium operating system. In the free space on the hard drive, I intend to install Windows Server 2003. When I insert the CD, the "install Windows Server 2003" is disabled. It does not run the application installation, and as such, I couldn't install this operating system.

  I even tried to start the insttallation put the DVD drive as a boot preference. Still it I cannot install the Windows Server 2003 operating system.

  Can someone help me in this problem. I wanted to install the Windows Server 2003 next to the Vista operating system.

  Thanks in advance.
  Rama

  > When I insert the CD, the "install Windows Server 2003" is disabled
  What do you mean by people with disabilities?

  You are not able to boot from the CD?

  In these cases, please press the C button immediately after switching on the laptop. This should allow booting from the CD/DVD drive.
  Alternatively, you can try to press the F12 key instead of the C key. This should allow the start menu. Then you could choose the STRANGE as boot device and might try to boot from the CD-ROM Server Win.

• Satellite A200-1BJ: Windows Server 2003 need display driver

  Dear Sir.

  A couple of days, I bought laptop Toshiba Satellite A200-1BJ of Jarir Book Store, Al-Khobar, Saudi Arabia.
  The system configuration is provided by the company.
  Operating system: Windows Vista editions Home Premium
  300 hard drive space is divided into two partitions:
  C - Vista with Go 138
  D data disk seen 139 GK

  I installed windows Server 2003 on the D drive. However, the hibernation and Eve features do not appear in the windows server 2003 OS. According to the Microsoft articale, these two functions becomes active only after the installation of the correct display drivers.

  My computer is the "Mobility Radeon HD2600" display device. I search all over the internet and also interviewed via e-mail at ati.com (the manufacturer of this device). I could not the device driver compatible for Windows Server 2003. According to the ATI support staff, I need to contact the manufacturer of the laptop is Toshiba himself.

  Can anyone provide me the site or the software driver for "Mobility Radeon HD2600.

  Thanks in advance.
  Kind regards.
  N. Rama Krishna Pai

  Hello

  Are you looking for the drivers for Windows Server 2003?
  Well, I think you will find all the drivers Win Server 2003 because this drivers don t exist.

  Win Server 2003 operating system was designed based on windows XP.
  So usually the drivers Win XP should work!

  Furthermore, as you are probably aware that the Win Server 2003 operating system is not supported by Toshiba you need to search on sites of third 3rd ATI graphic driver.

  Maybe a site www.omegadrivers.net might help you.

  But note; 3 third party drivers can be installed ONLY at your own RISK! Why?
  Because these drivers have not been tested and so no one can tell if the laptop will run stable and will work properly after installing these drivers.

• Quosmio G20-106: issue of Windows Server 2003 and the Fn keys +.

  I installed Windows Server 2003 on my Quosmio G20-106.

  After I installed all possible drivers and saving Toshiba download area, I have still 3 features in the "Other devices" section: eHome Infrared Tranciever, network card and the PCI device.

  In addition, Fn + keys do not work, I can not change the brightness.

  Any ideas?

  Hello

  Well, as far as I know the Qosmio G20 was delivered with Windows XP MCE.
  I found the drivers on the Toshiba site, and it seems they are designed only for Win XP and Win XP MCE. In this case, it is possible to s as the FN keys and other devices don't work.
  Nevertheless, it seems to install the LAN driver and modem driver.

  I found on the Web from Toshiba site a FAQ How to identify an unknown device
  Please visit this site:

  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

  Good bye

• Tecra A10 - 12O: installing the driver network card in Windows Server 2003 R2 Std

  Hello

  I received 6 laptop Tecra A10 - 12O, and we need to install Windows Server 2003 R2 Standard Edition with SP2 in all these six machines. Windows Server 2003 has been installed perfectly, but now we have only the network LAN card to work but we are unable to install its driver. When I installed Windows XP from the supplied DVD for Toshiba, it says Intel 82567V Gigabit network adapter. I tried to download the drivers for this adatpor of drivers Toshiba, Intel Web site, but it will not install in Windows Server 2003. I also tried manually force to choose and install a driver from the list, I choose that it will install but shows yellow question mark in Device Manager means that it does not work with this driver.

  I also tried the same Intel 82567V drivers from some sites non-Toshiba, of these models using the same network card, but is not truck drivers at all.

  I understand these laptop computers does not support Windows Server 2003, but these were ordered to be used as servers with Windows Server 2003 Standard Edition and I am required to make the Installer only with activated and installed network adapter.

  I try last week and exhausted all means to get the installed network adapter driver, but all have failed. Can someone please help with this? All support will be highly appreciated.

  Thank you.

  Charwal

  Hey Buddy

  If I m not wrong Windows Server 2003 uses the same drivers as Win XP and I guess that it s driver problem not a LAN, but perhaps also the problem of Windows Server 2003 installed.

  You are right; the LAN chip seems to be Intel 82567V and the LAN driver downloaded from Intel page should work 100%.

  In your case, I would recommend installing the chipset driver.
  Remove the LAN card from Device Manager, then restart the laptop.
  Then go back to Device Manager and update driver in pointing devices Manager to the place where the driver downloaded LAN was stored on the HARD drive.

• GPIB-USB-HS Windows Server 2003 driver available?

  I tried to install the GPIB-USB-HS device on our system of Windows Server 2003 R2 Standard 32 - Bit (German) with the last driver NI488.2 3.0 package.

  But the driver seems to be evil. After restarting Windows comes up with an error and event poster of the errors of several Viewer too:

  -The "nipxirmk" service failed to start due to the following error: the specified driver is invalid

  I think that the latest package isn't compatible Win Server 2003 but that it is announced at ni.com.

  Is it possible to install GPIB-USB-HS on a Win 2003 Server machine?

  Thanks for your help

  Kalize

  Windows Server 2003 32-bit R2 enables PAE by default ("physical address Extension") mode for addressing memory above the 4 GB limit.  National Instruments supports this operating system, it does not address memory above the 4 GB limit by using EAP setting and many pilots OR will fail to load if this setting is enabled.  (Note that your computer may intuitively put some of your memory above the 4 GB limit, even if you only have 4 GB of RAM).

  On Windows Server 2003, you can disable the EAP or prevent Windows to use addresses beyond 4 GB, which allows loading the drivers EITHER.  Please see KB 54D9I6M6: OR software failure when PAE (physical address Extension) is activated on Windows operat... for more information.

• Wireless AP do not communicate with Windows Server 2003 box on the cable network

  I have a wired network which has 2 PC under Windows 7, 1 PC Windows XP Pro, 2 LAN printers and a Windows Server 2003 as customers.

  The network through a switch and a router Comcast of class business.

  I am trying to add a wireless network access point and when I do the AP and the box of Windows Server 2003 are unable to speak / ping each other, even if strangelyboth of devices are able to communicate with all devices and clients on the network. These two will be just talk to each other. It doesn't matter if I use an access point or wireless router. Any wireless device attached with a cable of the switch won't talk on the server and vice versa.

  Laptop wireless connected to the AP take a DHCP of the router/modem Comcast address and can get on the internet, they just can't see the server as cable customers can. Any suggestion would be appreciated to grreatly.

  Thank you

  Greg

  Hello g_gauthier70,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Technet Windows Server General category.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
   
  Thank you

• DVD player not recognized after starting in windows server 2003 r2

  I installed Windows Server 2003 R2 Std on my HP DL180 G6 by using the internal DVD player, but after booting into windows, the DVD drive could not be recognized and it's showing in the 'PCI device' Device Manager under "Unknown device" with a yellow question mark. I googled and tried some of the solutions, also tried to reformat and reinstall Windows, but still facing the same problem. HP support gave me some solutions like updated BIOS, erasing the CMOS memory, unplug and plug back the sata cable, but always without success.

  Hi Lilida85,

  The question you have posted is related to Windows Server 2003 R2 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  Windows Server

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows Server 2003 on the HARD IDE in Mode ATAPI drive?

  Hello!
  My problem is that I want to know if a HDD IDE will run in Mode ATAPI.

  More details >

  There is a motherboard of INTEL S5000 VSA server in the office. He already had Win 2003 and everything was fine until the HARD drive crashed and the people replaced by an a SCSI maintenance (I don't know if he had a SATA, SCSI or an IDE HDD previously). After installing new HARD drive, they were not able to install Win server 2003 and went for 2008. Windows Server 2008 creates problems for us and the maintenance people are also confused and unresponsive to the situation.

  We have Windows Server 2003 R2. The motherboard has only one IDE port but scored the "working mode" as ATAPI. I was wondering if I could just attach an IDE HDD and install Win Server 2003 R2 (since win 2003 supports SATA out-of-the-box)

  (Displayed in the section of WIN XP as Win 2003 sharing the same base with XP, XP users can comment too)

  http://www.Intel.com/CD/channel/reseller/APAC/Eng/products/server/boards/DP/S5000VSA/feature/index.htm#specifications

  If a geek myself, I'm not very educated when it comes to servers. a Google search also did not help. I would be grateful if someone can help out me.

  Thank you
  Chirag.

  Yes it will install and work fine on an IDE hard drive, ATAPI devices are all IDE drives.  The downside is that the reader will be much slower than the SCSI on a busy server, which can be a big disadvantage.

  For all its value that they probably could not install Server 2003 on the SCSI disk because they weren't using the method of F6 to provide drivers SCSI on a diskette or that they could not understand or how their wake worth installation CD.  There is no need of such a monumental lapse, notwithstanding the limitation INT-13 NT4 Server installed on SCSI and Server 2003 installs on SCSI providing that you give appropriate when installing drivers.

  John

• Problems installing Windows Server 2003 on a T61

  Hello:

  I had installed Windows Server 2008 on a T61 and it was an installation smoothly with minor hickups.

  But some of the other required packages Windows 2003 Server (they do not support Server 2008 yet!). So I started to install Windows Server 2003 and that's where I found a lot of questions:

  1. I had to change the SATA in compatibility mode (Windows installation has complained that no hard drive found).

  2. I installed Windows Server 2003.

  3. I can't get the wireless network adapter to work. I tried the drivers for Windows 2000/XP on the Lenovo site, but the system does not recognize the card.

  4. the Device Manager lists the devices unrecognizable following three:

  Network controller (must be the wireless card. Properties/Details says "PCI VEN_8086 & DEV... »)

  Controller memory PCI (properties/details says "PCI VEN_8086 & DEV... »)

  Unknown device (properties/details says "ACPI\ATM1200\4 & 374CCB25 & 0")

  5. when I insert a USB key, it is recognized and a new disk is assigned. However, I have an external USB drive and when I plug that in, the system does not recognize the drive.

  Help, please.

  Vincent

  Roz:

  Yes, the wireless works on my laptop. Send me a private message and I can send you the driver that worked.

  Vincent

• Windows server 2003 service Pack 2

  I can't install 945 series of card mother gygabyte audio driver in windows Server 2003 service pack 2

  Hi behzad.pashahi,

  For more specialist help on Windows Server question, please repost your query on the Windows Server Forums.

  Windows Server Forums- http://social.technet.microsoft.com/Forums/en-US/winservergen/threads

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.