Windows Server 2008 - Group Policy does not

Similar Questions

• For MS WIndows server 2008 Remote Desktop does not work.

  Hello

  We have the following.

  1 VMware 5.5 Vsphare

  2 virtual MACHINE working with MS Windows 2008 ent.

  3 SAP on this server load balancing.

  4. his joints to a domain

  Now, we have enabled RDP and used a user can access to hold off.

  but when we take RDP and entered the IP address on the server mentioned above. It gives the error that the RDP is not activated.

  What we did...

  1 checked any local policy or domain... no problem

  2. check that the RDP port is listened to... no problem

  3. has changed the port 3389... nothing happened.

  4. check for any firewall issue... Order the Windows Firewall... Still nothing...

  Checked port 3389 with telnet... its not going is not to...

  Help, please...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Add the .jar to the Windows Server 2003 Group Policy

  So I have an executable JAR file that is intended to run our ads system employee. It reads the data from a separate txt file and displays it in a JFrame. My goal is to have this launch when you connect to all the computers in the workstation. The program works great! However, I can't start automatically. I added to group policy, as well under Windows Logon and start the system. I added as a .jar, such as a .bat, not even as a shortcut... no dice. Is it possible to get a .jar to run automatically at Windows logon via Group Policy?

  Also, I realize that JRE must be installed on all computers in the workstation for the .jar run. This isn't a problem, as many of our programs already require JRE.

  SaltyPeaches

  Post your question in the following Windows Sever forums

  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

• Windows Server 2008 Evaluation ISO will not read as boot, help drive!

  I downloaded the ISO of Windows Server 2008 Evaluation on my Windows 7 Ultimate Office. Then I burned it on a disc using windows image burner. After that I tried to install it on my server. Tried to leave as the only boot device dvd drive and it still did not read the dvd as a boot device. Help, please. Am that I supposed to burn using other software or something? Help, please. Thank you.

  Please repost your request in one of the most appropriate Windows Server Forums, thank you.

• Server 2008 rdp client does not keep by default local printer

  Question: Windows XP workstation connects to the client terminal server 2008 for an application. The local workstation XP has a based LPT printer. The local printer is selected to be used through the RDP client and can be seen on the Terminal Server session. The central issue is that the RDP session will not keep the local printer the default XP workstation. It can be chosen and works, but never stays after the end of the session and reconnect or even log out of the session and you reconnect. It never remains the default printer, instead, it takes the default value of the server administrator. 1 of 7 other network printers.

  Points: The XP workstation has a printer LPT laserjet 4000 series as is the local default LPT. I followed a Tech Note "http://support.microsoft.com/default.aspx?scid=kb;en-us;302361" which seems to have nothing to do with this topic.

  Note: The server is standard with clients more Terminal server 2008. All the network printers according to works, and other customers to keep printers default network without problem.

  Annex Note: http://social.technet.microsoft.com/Forums/en/winserverTS/thread/2a6944a1-d1cb-492c-b413-75dcbe7dad9b is linked. I have this strategy enabled for all other customers. I guess what would be necessary, would be a work around.

  Hello Brian Weiser.

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Windows Server 2008 and would be better suited to the TechNet community. Please click HERE to find a community that will provide the support you want.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Group Policy does not apply on Windows 7 with the Windows 2008 R2 domain controller

  Trying to troubleshoot a GP associated question where, seems, desktops (Win 7 Enterpise) do not receive the last group policy.  He doesn't seem to get at some point after an arbitrary time period (two or three weeks), but it is insanse.

  -Have you checked with the GPMC (connect to each domain controller individually) that all four domain controllers are running the same GP later version; no replication errors.

  -No errors appear on the workstation or server logs (logs\winlogon or event viewer-> Group Policy).

  -gpupdate/force runs without error

  -gpresult and RSoP both supplement fine, watch the GP is be applied correctly, to APPLY THE OLD GP SO!

  -No error up with whent the following undocumented debugging is also enabled: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Diagnostics] "GPSvcDebugLevel" = dword:00030002

  So, my little finger tells me that the problem is the GP are not be tire/replicated/either at the workplace in a timely mannger (reboot, gpupdate/force, etc.) but do not know how to see what is the interval, troubleshoot, etc.

  The server gurus hang out more in the TechNet forums.  This forum deals with questions of security of user, your question would be a better fit in the server instances:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• The Customer Service of group policy does not logon, access is denied - Windows 8 need quick help

  I use windows 8, I bought already on my laptop about three months ago.

  I have two accounts and "Managing" and "Kyle", I went to enter my password for "Kyle" account which has all my saved and valuable documents which I can't account "administer".

  A message appears

  "The Group Policy Client service could not sign-in.

  "Access denied."

  Please someone help me I need urgent access to my laptop

  Thank you

  Hi Kyle,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the problem, that you have problems with registration on the user account on the computer of Windows 8.

  I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.

  I would appreciate if you can help me with the following information.

  (1) is the computer that is connected to a domain or any form of computer network?

  (2) you are the computer administrator?

  If it's just a PC at home, connect using the administrator account and check the Group Policy client service.

  (a) press the Windows key + R, type services.msc in the Run dialog box and click on enter.

  (b) to navigate down the list until you find Group Policy Client.

  (c) make sure that it is set to Automatic and is started. You can change to double clicking on it and selecting the drop down.

  (d) try the user account login and check.

  It will be useful.

  Let us know if you encounter problems under Windows in the future. We will be happy to help you.

• Domain group policy does not work on a station

  Hello

  Been the last week reading everything that is available on the internet.

  Win 2008 R2 Standard

  Group Policy created and linked to an OU - ministere1

  in the AD, the container has users in it that the policy should apply to.

  everything works fine on PC1 for User1

  everything works fine on PC1 for User2

  does not work on PC2 or for User1 or 2

  RPC is enabled

  Domain controller - use the default

  gpupdate/force - shows update is successful

  Gpresult /R shows the groups appropriate for user 1 and 2 but can be applied strategy local politics

  is there something I need to turn it on to use the distributed domain GPO?

  BTW.

  politics is Frank - maps a network as a reader folder (checked the privileges and as said before - this works fine on PC1 but not on PC2)

  Both PC's are Win 7 64 bit Pro

  When you try to test the strategy side server it shows RPC server not available

  RSoP will also show access denied on PC2

  If you have any solution for this problem - please help

  In this case, Peter

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows server 2012 RDP Clipboard does not work for regular users

  Hello again,

  I wanted a little more secure our 2012 server.

  I disabled via GPO, local disk and printer redirection when a user connect through rdp.

  But I activated the policy to users, so while you can do the redirection of the Clipboard between there pc and rdp Server (copy / paste)

  Problem is that it works in only for the admin.

  The fact that local drive redirection is disable that copy / paste does not work?

  Force the update of the Group Policy object and I sign the user out and reconnect and copy and paste does not work

  and also, the process rdpclip.exe is running. I have restart this process.

  Any help or guide

  Thank you once again.

  Hello

  As I mentioned in your other Thread that we do not respond to server problems in this community.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2008 R2 license expires (not trial)

  I have installed a Windows Server 2003 R2 x 64. I installed a new license. Now he says that the license will expire. I followed the example of Microsoft on how to know if there is a trial version. It is not the case. How to remedy.

  Hello

  Server support, you can find forums on TechNet, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• The user group policy does not

  Recently, I noticed that the group policies that are assigned the user to my organization OR may not apply.  When I do a gpresult, does not that the virtual machine is looking this UO at all even.  View machines are supposed to load user policies as any other workstation domain?

  I found the cause, a stupid mistake on my part.  There is a strategy of the computer that had active loopback, but replace the value.

• The Customer Service of group policy does not logon, access is denied.

  I tried to reboot in safe mode, but it does not log it. There is no secondary logon to use. The only record of restore point was forward who has not at the problem of the evening. Where can I go from here?

  Disable hide hidden files and Hide protected operating system files

  Open my computer

  Press ALT + T

  Click options, and then view the folder

  Click on show hidden files folders and drives

  Uncheck the Hide protected files BONES

  Then use the volume shadow copy service store to restore a previous backup of the ntuser *. * file

  To make this opening users profile folder in c:\users\

  Right-click on the name of the profile

  in the tabs list, click Previous Versions

  Choose the second most recent snapshot and click Open

  Copy all the ntuser files and paste them to the user profile folder c:\users\[profilename]

  replace all and restart

  Log in as the user

• How can I add a language bar on taskbar domain member station work by windows server 2012 group policy

  How can I get the language bar on workstation member domain "taskbar of Windows server 2012. GPO

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Why is group policy does not apply to certain customers in an appropriate way?

  It is a weird problem that I need help to find.

  I have especially windows 7 32-bit and 64-bit client workstations.

  PDC is Windows 2008 R2

  The SDC is R2 2012 Windows

  SDC has (supposedly) console, WSUS and IIS installed and configured correctly.

  Default domain policy had automatic updates set to disabled. I activated the strategy.

  I ran gpupdate/force on the faulty computers who won't get to the console.

  Computers refuse to appear. The windows day newspaper showed that the AU has been disabled by policy.

  I run gpresult /h and configure the automatic updates is disabled in the default domain policy.

  Both the AD and versions of Sysvol on the match from the customer to the top with AD and Sysvol on the servers.

  The client can communicate with the PDC, very well. The default domain policy is the GPO winner according to gpresult.

  What is the problem? I can publish newspapers or gpresults if necessary.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Group Policy does not logon, access is that denied__ - your user profile was not loaded correctly.

  Hello

  Portable autonomous-A of Acer Vista

  any PRO to help me get out of these two errors produced one after the other?

  I got the first problem (the strategy of group...) but I tried to log on again and he succeeded for a few days, but whenever I had to log on and reconnect

  Then the second problem (your profile...) took place and I could not log on with this user acc, my settings is lost...

  Then I had to go to the registry (by searching for help on the forums) to remove the SID, and I also deleted the user account and another

  In as long as administrator, I have no problem, would not restore or backup, cuz my documents would be lost (and will be)

  Now with this user VAC, I have the same problem, seems there is something out there do this boredom...

  Mentioning that I used to use my wireless (access point), but due to an expert (working at the network service provider) that has me using it if really necessary, I prefer not to use (in fact as a promotion I received the package of free wireless access point :)

  I'm not an expert and so here I am left high and dry to understand what could be the trouble maker (or software) program

  The problem is on my nerves. I even tried to account for one-third and untangle by removing the SID and new admin session of the ACC, and restart, but failed to fix.

  PLEASE HELP ME AS SOON AS POSSIBLE

  Armi

  Corruption user such as you are experiencing may be caused by several things: malware, failure of hardware, the corruption of system files because of inappropriately, etc.. So to begin troubleshooting:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If the computer is clean and the problem persists, test the equipment starting with the hard drive, then the RAM.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  In all cases you should backup your data on external media such as an external hard drive or USB thumb drive NOW.

  http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!