Windows Server 2008, the server process could not be started because the configured identity is incorrect. Check the user name and password.

Similar Questions

• Server process could not be started because the configured identity is incorrect (massive failure Windows 7)

  I had worked in Vista x 64 for more than a year and upgraded to Windows 7 x 64 Ultimate a week ago. IT has worked so far and things suddenly got completely screwed up without obvious reason. I'm into the following loop, where I can't go out:

  1. after booting, two minutes is spent with the message "waiting for Group Policy Client" (normal startup takes less than a minute).

  2. once I enter the password, it passes to another two minutes with "Please wait for the user profile Service...". "(normally, the connection is instant)

  3. I'm connected (I am administrator), but a lot of things is false:

  -Without Aero. Single base type GUI Windows 2000 gray

  -Lack of network

  -A bubble message appears in the status bar:
  Unable to connect to a windows service
  Windows could not connect to the service user profile Service.
  This problem prevents standard users to log on the system...

  -Almost nothing works. Attempts to start to explore causes this error message:
  SOLUTION EXPLORER. EXE
  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  -Try to start the Panel of results in the following dialog box:
  Window title: {26ee0668-a00a-44d7-9371-beb064c98683}
  Message:
  {26ee0668-a00a-44d7-9371-beb064c98683}
  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  -Try to start most of the results of Windows programs in the variation of the above two messages

  -Event log is not functional. I am able to start-> Run-> Services and don't start all services of the event log, but it always says "The event log Service is unavailable".

  4. the things I have already tried and that has NOT worked:

  -System Restore to a point a few days ago when everything worked did not help
  -When you log on under different user accounts (administrator or not administrator), I have the same symptoms.
  -Try to re - install Windows 7 from the DVD fails - it says "source is no longer available...". "or something like that

  That did not help.

  In safe mode, the same problem occurred - cannot do anything and get the same error - "...". configured identity is incorrect... ».
  There is no missing or damaged file.

  in any case, thanks for responding.

  I was hoping that Windows 7 would solve the problems of stability of Vista, but I was wrong - things are even worse.
  It was the last straw - I decided to empty Windows and had Ubuntu Linux.

• When you enter the user name and password in Windows Mail I get the following error: Server error: 0x800CCC90, error number: 0x800CCC92.

  Difficulties of username and password.

  In Windows Mail I suddenly wonder for the user name and password.  I fill them but receive no mail from mu.  I get the message:

  Account: 'pophost1.classicfm.net', server: 'pophost1.classicfm.net', Protocol: POP3, server response: '-ERR failed the connection. ', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92.

  Please can you help me?

  Hello

  ·         Were there any changes to the computer, lately?

  Method 1:

  (a) start the Windows Messaging mail client.

  (b) click on 'Tools' from the main menu and choose "accounts".

  (c) a pop up will appear showing you all the email accounts in Windows Mail. Select the one that gives you the error and then click on the button 'Properties'.

  (d) another window pop up displays all parameters associated with this account.

  (e) under the "servers" tab check the 'e-mail username' and 'password'. One of them would certainly incorrect which translates the ID of Windows Mail error 0x800CCC92

  (f) to avoid having to enter the user name and password each time, check the box in front of "Remember password".

  (g) once you make the appropriate changes, click on the button 'apply' then 'OK'. Close the other pop-up window

  Method 2: Remove the existing from Windows mail email account and create a new one following the link provided below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-Windows-mail-account

  Reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

• I receive the "could not sign in you [access denied: 530]." Check your user name and password ' problem on Adobe Muse CC 2014 and I can not access the xml file that is supposed to solve this problem?

  I am a PC user and I have Adobe Creative Cloud Muse 2014. I received the "could not sign in you [access denied: 530]." Check your username and password "error. trying to download my muse to my ftp, GoDaddy host site I did it successfully in the past and that recently it has stopped working. I looked online at the Adobe Muse Help FAQ | Download a Site from Muse Adobe on a third-party hosting service and he said to download the ftpprefs.xml file but this file simply leads to a blank page that says / * not found * / / * not found * /.

  Can you direct me to a page to work with this file, or provide an alternative? Thank you!

  Hello

  As you have found the error [access denied: 530] This means that the problem is with access. The user name and password that you enter is incorrect or you don't have the appropriate permissions.

  I suggest you to contact Godaddy to reset the password or reset the permissions.

  
  

  Concerning

  Vivek

• In Windows Mail, journal on security keeps popping up asking me to check the user name and password.

  Original title: "Windows Security".

  I have Vista Home Premium with SP 2. In Windows Mail, logon security keeps popping up asking me to check the user name and password. This happens from time to time for many months and I've always got to work but happened several times today.  I can sign in the server through my ISP and get email. In Windows mail, I confirmed that the name of username-password is the same that I connect through the ISP.  I can't front/send by email but receive in Windows mail.

  Server response: '-ERR [IN USE] account is locked by another session or for maintenance, try again.',

  So wait a while and try again later.  You can also go to their website and log on there to see if it works.

  Also try to compact and repair the database (see www.oehelp.com/WMUtil/)

  Steve

• Not receive a computer given to nine, but don't know the user name and password

  I got a refurbished computer and I don't know the user name and password. Someone knows what to do?

  * original title - I received a refurbished computer and I don't know the user name and password. Someone knows what to do? *

  Hello

  Reinstall vista

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I'm trying to restore the Vista system on a Dell computer. It restores to the point where I have to put in the user name and password, but it does not type in the username areas. Help. Thank you

  I use the recovery disks, restore the Visat OS on a dell laptop.  After the OS system, it displays the screen that requires the user name and password.  I can change the image associated with the user name, I can move the box around the screen, but it won't let me type in the username and password box.  Without putting the usernane and the password it will not go further, and I can not restore.  Help, please.  Thank you.

  Hello

  This is the Information from Dell to reinstall using disks:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  For any problem using it, contact Dell:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  Or post in the Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Everytime I open my Windows Live email account I asks me to enter the user name and password and I see an 0x8000CC17 error message

  Whenever I open my email account, I asks me to enter the user name and password and I see an 0x8000CC17 error message. Please can you offer any advice. Thank you

  * original title - Hello, I am a user of Windows Vista and my email account is windows mail *.

  Hi Petersanswers,

  Thanks for posting your question in the Microsoft answers Forum.  For information about Windows Live Mail, please visit the following link:

  http://windowslivehelp.com/forums.aspx?ProductID=15

  Thank you!

• [MAF] How to get the user name and password after login?

  Hi Experts,

  I have a call to REST where it requires identification information of the user (uname and password) to identify the data that belongs to who.

  Authentication has been made with OAuth.

  I believe that there is an API to get the user name and password in the CRG

  See you soon,.

  Hendry

  Hello.

  You don't need to manipulate the credentials yourself in code. MAF will propagate the logon cookie or inject the identification information in the HTTP header if cookies are not supported.

  To do this, you must select the purchase option of cookie from the server connection Include in REST in the dialog box create a connection Login MAF , such as discussed here:

  http://docs.Oracle.com/middleware/maf210/mobile/develop/MAF-securing.htm#ADFMF23732

  In addition, you must attach the policy of security appropriate to the connection, as explained here:

  http://docs.Oracle.com/middleware/maf210/mobile/develop/MAF-Web-services.htm#ADFMF23697

  Best regards

  Frédéric Desbiens

  Senior Product Manager

  Mobility and Cloud oracle

  Twitter: @BlueberryCoder

  blog: http://blogs.oracle.com/blueberry

• message: configuration cannot be verified - is the user name and password? None of them are wrong. I'm trying to set up my work email. How to solve the thi

  I have been using Thunderbird for a long time. One day he told me that my password is incorrect. After several attempts, the correct password decided to remove the e-mail account and start to charge. Now, when I put the account it says "configuration could not be verified - is the user name and password? None of them are wrong. I tried to change the password, contact my email provider and everything works fine except when trying to use Thunderbird. The email that I had tried to set up is at work. Any help in fixing this will really appreciate it.

  The best suggestion is to get the correct settings from your provider. They move to the top of their servers. They know the settings that work.

• deleted user account and the screen is the user name and password

  Hello

  Thank you very much for the help in advance.

  My personal PC at home never used me to ask for a password when I start it up, I can't put in when I took it out of the box, if I did, then I forgot. now, I went and I deleted the user account (admin) on W7 (the only one I had)... went to RUN > typed in "control userpasswords2" > highlighted account > remove... the PC did not ask if I want to keep the files or not, he just asked me to reboot now or later. I rebooted.

  THE PROBLEM IS: after I restarted the PC, it now wants to put me the user name and password, I do not know if she wants my old username and password or what? (Forgot my password)

  Will be commissioning a PC on the mode using safe without a boot disk (not yet tried) and what happens if the hidden admin account is what I deleted, then where?

  Please help because I tried to put my old username that I used until I deleted the account... what username and password he wants and what can I do to use my PC again.

  What is your computer brand and model? If not a branded computer, what is your motherboard brand and model?

  When you start in safe mode, how many accounts user do you have? If more than one, you can create a new user account?

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-GB/Windows-Vista/fix-a-corrupted-user-profile

• I have Dreamweaver CS6 and want to know if I can edit an existing Web site built in front of Page if I have the user name and password, and how do I go about this?

  I have Dreamweaver CS6 and want to know if I can edit an existing Web site built in front of Page if I have the user name and password, and how do I go about this?

  Hello

  You must define a site in Dreamweaver and need to set up your FTP server. One for that, you can connect with the FTP server where your FrontPage is loaded and you can get the copy of the said locally.

  Link below explains how.

  Define a Site in DW

  Define a site in Dreamweaver. Adobe Dreamweaver CC tutorials

  https://www.YouTube.com/watch?v=sHAvSbdRgu8

  Connection to the FTP server

  https://helpx.Adobe.com/Dreamweaver/using/connect-remote-server.html

  Using Dreamweaver | Edit an existing remote Web site

  Concerning

  Vivek

• How can I change the user name and password

  I successfully download the FVO and install the virtual appliance. It works very well with my blackberry. I can connect to individual servers or virtual Center.

  However I don't know how to change the user name and password.

  I would also like to know how it works?

  We have a BES server on our network and no configuration is necessary. I just turned on the device Mobile Access of vCenter and entered the ip address of my virtual Center and bingo, I can access through my blackberry.

  If you try to change the Appliance virtual username and password, you can use the standard linux commands (adduser, passwd, chgrp, chown, etc.,)

  The default user name and password so that the robot is root/vmware"."

• I added the user name to log on to the computer in the active directory after adding, I can't connect to the internal application by using the user name and password...

  Hello

  I added the user name to log on to the computer in the active directory after adding, I can't connect to the internal application by using the user name and password...

  Please give the solution

  What happens when you try to connect?

  If you are able to connect using the different account, try running gpupdate/force.

  If the problem persists, you can open the discussion on:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home

  What is responsible technical issues forum.

• How to set the user name and password when you use the class for SOCKS5 Proxy?

  Hi all
  
  I use the proxy class for SOCKS5, so need to set the user name and password, I can't find where I put the value. If the API support.
  
  Thanks in advance!

  Exactly how to repeat the question five times ater, we told you the answer would erase anything? A: this isn't. This irritates just the hell out of people. Irritating the hell of those who's trying to help you is not rational behavior either.

  I have no idea on the support of third-party for transmission by proxy via NIO.