Windows Server 2012 BEX problem

Similar Questions

• vmxnet3 adapter on windows server 2012 with problem of bottleneck for MSSQL Server

  Hello!

  We have a server windows 2012 R2 with MSSQL server 2014.

  The client software uses the jdbc for database connection. If customers make a query which collects a massive amount of data the whole thing slowed down after a while.

  Then, his need to wait 10-20 minutes to speed up again. I have tested and tried everything.

  -measure the ethernet parameters

  -replace the cables by cat7

  -installed a virtual machine with the windows client and the real customer use the virtual environment via rdp

  -activated the RSS in the vmxnet3 advanced settings and windows

  -the mode SplitRx in vcenter vm settings and disabled ethernet Coalescent too

  -set the VM to high latency

  -tried to migrate the virtual machine to another host

  Not for their help. If a massive sql query is run first its great, then the need for a second or more to check a single record.

  checked the vm cpu stress but its less than 5% all the time. Checked the network with wireshark, there are a lot of small packets but nothing big. The bandwidth used is still low.

  When its idle delay after two packets will increase from a few ms to 400-500 ms.

  Our most powerful server is an HP DL380 G9 with two octa core Xeon processor 384 GB of ram, full SSD datastore. Its a lightning fast host.

  The virtual machine have 8 core cpu and 64 GB of ram.

  No matter where am I up the virtual machine or how many resources provide the custom aisle question.

  The strange thing is when customers slowed down I can copy large files between the client and the server with fast speed, so the slow sql.

  I can solved this question if I use the ethernet E1000 instead of the VMXNET3 adapter, but E1000 have much more load and the server need to transfer big files too, not only the sql service.

  Vmxnet3 much faster and have less overhead, but this question of sql, I have a problem with that. So I go back to the E1000 for now. Its slower eat more cpu but the sql connections works very well without any problems.

  Can someone tell me what I can try harder to identify the vmxnet3 problem? I really need it to improve network performance and lower overhead, but the rapid sql is the top priority.

  Thank you!!!

  We had exactly the same problem on our SQL servers once upgraded to Vsphere6.This is due to Receive Segment coalescence feature in new VMXNET3-nics on Win 2012.

  More details here: http://nickmarshall.com.au/blog/2015/7/24/vsphere-6-hardware-version-11

  The best way to solve this problem is to turn it off completely in the server operating system (in the admin command prompt):

  netsh int tcp set global rsc = disabled

  
  

  Check with:

  
  

  netsh int tcp show global

  It's fast and easy without downtime or disruptions and involves no change types of nic.

  After doing this on all our SQL and application servers, everything was ok.

  
  

  
  

• Windows Server 2012 Foundation and SMB problems with older equipment

  Hello

  My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.

  This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636

  But of course, the solution does work with my version of the server.

  Does anyone know if there is a similar fix available?  I got my hunting.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem

  I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.

  I want to connect the printer via USB only.

  I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.

  But every time the same problem occurs.

  The printer driver is correctly installed, but the printer HP (LEDM) driver failed.

  The debugging information:

  Installed the device.

  hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219

  If I want to reinstall the driver again, I received the message:

  Setup error

  An entry in the Inf file is missing, the file may be Windows 95...

  Could you please help me, how to solve this problem?

  I need to activate the visual experience of Windows Server 2013, then the USB works

• Problems installing OBIEE11.1.1.9.0 on MS Windows Server 2012 SP2

  Hello Experts,

  We install OBIEE11.1.1.9.0 on MS Windows Server 2012 SP2. He was installing (install the business - create a new BI system) smoothly, but in the last configuration Page progression at 27%, he was stuck. In accordance with the recommendation of oracle.

  It is a problem with WebLogic Server installation on Windows 2012 R2. That is documented in the unpublished bug 16844206 WLST IMPOSSIBLE GET ENV ON WINDOWS SERVER 12 WITH ENV MINIMAL

  MDG action plan-
  

  Install Java 1.7.

  Installation of WebLogic Server 10.3.6.

  Patch WebLogic Server with Patch 16844206 .

  Perform a software installation of OBIEE 11.1.1.9.0.

  Configure OBIEE

  
  

  Following the same thing we did it-

  (a) installed weblogic 10.3.6

  (b) Dowbloaded the patch and ran GUI and command line.

  
  

  1. When was held from the GUI

  Downloaded Patch_16844206. copied the content of this file zip, except the file Readme in your cache directory SmartUpdate (MW_HOME/utils/bsu/default cache_dir). Ran the bsu.cmd file located in the folder WM_HOME/Middleware/utils/bsu to open the Smart Update utility Oracle - and then 'downloaded Patches' table ffound Patch Id SRSV Bug 16844206 and then clicked on apply.

  However after doing a "running Validation" popup appears and he is blocked for 90 minutes at this same position. (see screenshot)

  http://www.use.com/FonC8

  2. When ran from command line-

  
  

  D:\app\Oracle\Middleware\utils\bsu > bsu.cmd-prod_dir=D:\app\Oracle\Middleware\wlserver_10.3-patch_download_dir = D:\app\Oracle\Middleware\utils\bsu\cache_dir-statut = downloaded - discovers - verbose

  Exception in thread "Main Thread" means

  D:\app\Oracle\Middleware\utils\bsu > bsu.cmd-prod_dir=D:\app\Oracle\Middleware\wlserver_10.3 - patchlist = 23698-verbose - install

  Exception in thread "Main Thread" means

  
  

  Any solution?

  
  

  Thank you very much

  Benoit
  

  Hi all

  According to Oracle advises has resolved it as follows.

  It is a failure with OutOfMemory. Increase the memory allocated for the process of the bsu. Change the following line in bsu.cmd

  MEM_ARGS =-Xms256m-Xmx512m set

  TO

  Set MEM_ARGS =-Xms1024m-Xmx1024m

  Basically, you will need to open bsu.cmd in Notepad, and then change the setting above. And then again run. And it will work.

  Thank you very much

  Benoit

• Debugging in kernel mode on network problem Windows Server 2012 R2 or Windows 8.1 comments

  Hi all!

  I tried the kernel debugger of network installation of client Windows Server R2 2012 on article according to VMware Workstation 10.0.1:
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/hh439346 (v = vs. 85) .aspx

  But I can't connect to guest with WinDBG. I have set up bcdedit, restart and see that boot OS comments very slow.
  Then I run regedit, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kdnet and see that
  KdInitResultString value is 'InitializeNetwork could get the Ethernet address of the host debugger.".
  KdInitStatus value is "c00000b5".

  I tried:
  -change of hardware to 9 version
  -change the comments to e1000 Ethernet card
  -disable the DHCP (debugger comments must use APIPA)
  -change the type of connection (bridge NAT, host-only)

  and every time I get the error "Failure of InitializeNetwork get the Ethernet address of the host debugger.". Guest 8.1 Windows x 64 and x 86 Windows 8.1 I get the same result.
  But I can debug comments Windows Server 2012 and Windows 8 on network without any problems. Also I can debug Windows Server R2 2012 on Oracle VirtualBox network.

  Is this a problem of VMware Workstation? Anyone can debug comments WIndows Server 2012 R2 or Windows 8.1 on network in VMware Workstation?

  Thank you!

  Have you tried the Workstation Technology Preview July 2014? (https://communities.vmware.com/community/vmtn/workstation/vmware-workstation-technology-preview-2014) I think that this problem has been resolved.

• Problema al add UN nodo adicional al Cluster Windows Server 2012 con VMware Workstation 9 en

  Hola Buenas,

  Ante todo decir este are a Québec fallo he revisado y las responses in different los don't post han well para help me, good os.

  El caso are that I have 2 servers DELL PowerEdge R420 fisicos identicos, cada uno con ellos 3 VMs sober instaladas VMware Workstation 9. The first virtual machine are an image of Kerio control, a second virtual machine to Windows Server 2012 con dominio Controladora, is the third VM con WS2012're donde quiero crear el cluster con dominio usuario. ESTOS servidores knew vez esta una cabina data via iSCSI connected.

  Add tambien when performed the tests of validation led Cluster, todo lo tengo OK. El caso are so creo el cluster con el Nodo 1 y 2 Nodo (sugar Québec cada uno fisica Máquina distinta ellos y bajo mismo Dominio) me error UN da has the el crear hora cluster. In cambio, if creo el Cluster con este nodos if any to crea, pero el fallo viene a hora of connect UN nodo adicional (ya sea o 1 Nodo Nodo 2). Este fallo viene cuando el nodo TR checks are completely funcional in el Cluster, is is "pensando" y da fallo por tiempo sold.

  He revisado problemas similar y he visto that el antivirus can be una causa e caso no lo're are only aun no he wont any AV... There comprobado red devices (utilizamos 4, 2 iSCSI, 1 red LAN y otra heart rate), he desactivado los red el protocolo IPv6 devices, he probado connect los nodos con el Kerio Offline, el desactivado firewall of Windows, exportar components del registro TCPIP6, capture las conexiones iSCSI...

  El cluster is as en Máquinas Office instalacion del WS2012 y is ha hecho manera person, no mediante VMWare del injerto.

  Una nueva prueba as hoy he ha hecho sido realize el cluster 2 maquinas office in una misma Máquina física y to ha s con exito, pero cuando intento realize el 2 nodos cluster (2 machines virtual cada una fisica diferente Máquinas) cuando me da el error. Esto deduzco raiz Quebec are a VMware o red, no lo o problema se, he probado use tan solo 1 switch (infrastructure utilizaria 2), changing IPs, pero igual sigo as can be? contacts? Alguna especifica VMware config?

  El caso're llevo several days ago that don't con este problema y no se a what can deber, agradeceria muchisimo the the comunidad ayuda.

  MUCHAS Gracias

  Buenas

  Between 2 workstation are posible realize ese tipo configs of forma limpia.

  El problema're (sniffer lo of UN pones veras TR), Los nodos assume ip-spoofing y arp spoofing cuando salen por tarjeta of Red led host.

  Para hacer eso as pides, deberias workstation pasar an esxi.

  Saludos

• Cf11 install problem on WIndows server 2012 R2

  We have a new installation of windows server 2012 R2 with a new installation standard CF11 installed on the C drive. Everything is 64-bit. The CF Administrator site and the connection works fine.  cfm files will not upwards in the default directory, but IIS displays htm thin files.  CF Administrator works fine.

  Web server configuration tool will only show "None" in the box of the IIS Web Site.  The usual CGI, APS, etc. were installed on IIS.  IIS and CF11 have in fact been re-installed.  Manual run wsconfig.exe shows no errors.

  The problem is that any call to a model cfm results an error (html pages serve very well):

  Error HTTP 500.0 - internal server error

  The page cannot be displayed because an internal server error has occurred.

  Detailed error information:

  Module IsapiModule

  Notification ExecuteRequestHandler

  Manager cfmHandler

  Error 0x8007007f

  URL requested http://localhost: 80 / default.cfm

  Physical path C:\inetpub\wwwroot\default.cfm

  Can anyone give suggestions for troubleshooting?  No newspaper appears to show all information that helps.

  Solved the problem... it is not a problem of one CF but and especially an IIS problem...

  (1) remove IIS... including the inetpub directory... Remove extensibility .NET Server under the Application Development Manager inetpub misuse this... inetpub should be deleted.

  (2) restart

  (3) reinstall IIS and enable all the usual stuff, that is to say, CGI, ISAPI, .NET, ASP, WebSocket Protocol, etc. in the application development

  (4) restart IIS and CF

  (5) Web Server Config set to 'all '.

  60 restart IIS and CF

  The thing completely reinstall IIS and which is only done if you can delete the folder under the root of the drive-inetpub.

• problemi su periferica vm windows server 2012 usb

  Ho una scheda usb TNT is known una vm windows server 2012, to faccio partire it server esxi 5.1 e launch the vm tutto ok;

  just magnobeam o riavvio vm no esxi the periferica tutto viene persa. Sono costretto an extreme tutto centred it server esxi;

  collegandomi in ssh sul Server e lanciando he lsusb the periferica comando non vedo più... la cosa strana e che ho anche a obvious da usb a series e viene rilevato sempre e funziona place vm anche sulla is riavvio o the magnobeam;

  Come posso risolvere?

  He e mouse series no are hurt in passthrough went VM ospitata, e questa the difference!

  relativamente alla periferica DTT, e in general al supporto USB su vsphere, anche lo who sewn by altri che aprono wireless o che leggeranno e altri in futuro, sempre lo stesso discorso e boom: he supporto USB di ESXi e molto traffico e he Liveleak.com varia da periferica a periferica. Very nearly killed her periferica non supportata, ogni Liveleak.com ottimale non e quindi e da mettere in conto, e UNICA e fare dei tests per verificare he Liveleak.com all'atto pratico. So that is brutal, my both ' e...

  Gli alone due documenti official cui Può fare sono questi re if:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1022290

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalID=1021345

• Installation of Windows Server 2012 problem

  I tried with different configurations, install Windows Server 2012 as operating system prompted but still got the error attached.
  Someone knows why?

  Hello and welcome to the communities.

  What version of VMware Player are you using?

• Satellite P850 - 31 M - invalid key, the installation of Windows Server 2012

  Hello

  I don't know about or write about me, that it moves if necessary.
  So here's my problem.

  I just bought a laptop with the windows installation 8, but I want to install Windows Server 2012.
  I boot on my dvd, everything's fine, and then I click on install and then he told me that the key was invalid.
  But I do not enter a key.

  When I reinstall windows 8 I give no key and it did not in the property and after he told me that windows is activated.

  I don't understand the key or it will scan?
  I have how little he turns to me key?

  Thanks in advance

  Sorry, but I m confused.

  If you have purchased the license Windows Server 2012, then you have also a serial key.
  You must use this key for activation.

  Victory 8 regarding:
  I guess Win 8 was preinstalled.
  In this case, you will need to create a recovery disk before you install another system?
  You don't have any disk Win 8 because there was a possibility to create a recovery disk and the recovery disk contains a 8 win which is enabled.

• Install OfficeJet Pro 8610 on Windows Server 2012

  Hello

  I'm trying to install the drivers for a Pro OfficeJet 8610 on a system running Windows Server 2012. I installed the drivers from here (after choosing Windows 2012 for the operating system): http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-8610-e-All-in-One-Printer-series/53...

  First of all, I tried to install using the GUI (Setup.exe) but ran into an error indicating that the operating system was not compatible.

  I did some research and discovered that these drivers must be installed by using the command line and the command msiexec.exe. I tried to do it by using the following command-line (with administrator privileges): msiexec.exe /i PATHTOMSI

  However, when I do that, it gives me ALWAYS an error of incompatible operating system. Don't know what to do here.

  Here is a link to the Post on the HP Forum explaining the need for a command line install: http://h30434.www3.hp.com/t5/LaserJet-Printing/installing-Pro-8610-Windows-server-2008rt-X64/m-p/426...

  Thank you.

  I ended up soliving this problem myself while tinkering around.

  I went through the process of adding a new printer through the devices window and printers.

  I said my printer was not listend so opted to manually configure a printer. I have created a new local port and he just called the name of the printer. He then invited for drivers. I chose the disc and then navigated to the folder where I had extracted the printer drivers. Selected this file and the drivers installed.

  This example gets the drivers installed in the system. Windows should then automatically recognize/install the printer if it is plugged.

  Mind you, I had to do that only for printing on a desktop connection remote. If you need the real HP software installed to print AND scan, this will not work for this.

• Windows Server 2012 R2 Datacenter - "we couldn't complete updates of changes to undo; do not turn off your computer.

  There are approximately 247 updated to do with this Windows Server & as before in the past w / various different OS that I discovered that these must be mounted separately & batch too for these works correctly!

  There must be - a kind of server 2012/r2 cumulative hotfix / service pack that will sort most of these problems of updates w / a download link for getting these!

  But how & in which updates of the batch/grna they do have to do to finish correctly without these issues and so on!

  example"separate updates like this should be done in separate lots and so on!

  (a) Internet Explorer updates

  (b) .NET Framework 4.6

  (c) KB * item updates made in various lots of diferent etc.

  Thanks a lot for your help as it is very much appreciated! A little more the last hours of your answer I had actually beta tested who follows & found that if you keep w / the following it works actually & w/out any error!

  ***************************************

  Windows Server 2012 R2 Datacenter - updates!
  Manually set the updates of Windows Server R2 Datacenter 2012 as follows"
  ' Check for updates but let me choose whether to downloadand install them.
  ***************************************
  (c) Finally,... There are several optional updates to do that must also be separated for installs them!

  1 Microsoft Silverlight (KB3182373)

  6 update to Windows Server 2012 R2

  "(b) s @ less (233) KB * important updates that should be made in separate batches of selected manually - from a @ bottom & goes to the high c as follows.

  119 for Windows Server R2 2012
  98 security Update for Windows Server R2 2012
  1 acumulative Security Update for Internet Explore 11
  1 cumulative reliability for Microsoft .net 4.6
  1 security Update for Microsoft ASP.NET
  13 4.6 .net Framework

  (a) there were several original KB * updates manually, I downloaded & installed directly from the "Microsoft Download Center" w / some which are detailed below.

  1 Windows Server 2012 R2 Update (KB2919355)
  1 update to Windows Server 2012 R2 (KB2883200)

• Windows Server 2012 Standard Activation failure

  Hi MS supports,

  We have two Windows Server 2012 Standard which must be activated with the information of the right at the bottom of the windows desktop as shown in Figure 1.

  Then, I run the command slui and enter the product key to activate as shown in figure 2.

  Unfortunately, I got an error with already shown as Picture 3.

  Note,

  • I called the Activation Center as indicated in picture 4 in Norway to attempt activation by phone, but the CSR told me that they cannot generate the confirmation ID to activate the operating system.
  • The server is not connected and cannot be connected to the internet for internal use only.

  Can I have your help to solve the problem? and I also need to know the impact if it is not enabled.

  Thank you.

  Figure 1:

  

  Photo 2:

  

  Photo 3:

  

  Photo 4:

  

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• One user away from the dashboard of the range Windows Server 2012 R2 Essentials

  We migrated from SBS 2008 for Windows Server 2012 R2 Essentials range. All users and computers have successfully migrated and their list is visible in the ADUC.

  However, a user is missing from the Windows Essentials Dashboard (users in the navigation bar, tab users).

  The user can work normally: connecting to Active Directory, it can see shared folders and so on. But it is not in the list above. Because of this, it cannot be administered in the dashboard (for Windows Server Essentials).

  What can be the problem? How can get us in the list? What other information should we supply for you to find the answer?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.