Windows Server 2012 Foundation and SMB problems with older equipment

Similar Questions

• Windows Server 2012 Foundation - installation of recovery DVDs - Activation question

  Hi all

  Please could you help me with the following text:

  After the installation of Windows Server 2012 Foundation of Fujitsu Operating System Recovery DVD Fujitsu server activation does not work. Error code: 0xC004E003, Error Description: The Software Licensing Service reported that license evaluation failed.

  Thank you

  Ivo

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Blue screen of death (0x0000003b) on Windows server 2012.

  Hello! I found a problem with windows server 2012. This server runs on a VMware virtual machine, and once of the month I get this error, but the drivers can cause this error all the time different.

  For the first time this problem caused the driver AgileVpn.sys, second and third time win32k.sys. And the last pilot time named videoprt.sys caused this problem.

  I spent a lot of time to search for a patch. But I have not found a necessary updates in Windows server 2012 r1 for this problem.

  Maybe give me a little help or tell me what I need to do?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• FT-record/replay feature is not supported by this virtual machine Windows Server 2012

  Recently I came across a bug when I created a virtual machine with the latest versions of 5.1.0 - ESXi 838463, Client ver 5.1.0 - 860230, vCenter ver 5.1.0 - 880146.  If you create a virtual machine on a Server Windows 2012 farm for some reason any recording/playback is disabled and you cannot implement fault tolerance mode.  I found a good solution.  You delete the virtual machine to inventory, and then re-create the virtual machine as a Windows 2008 R2 server and use the virtual machine that you deleted from the original disc of the inventory rather than create a new one.  Then turn on FT.  Then, go into the settings and change the operating system to Windows Server 2012.   Fixed a problem.  If all goes well they will fix this soon.

  Jimmy S.

  Default adapter for windows 2012 is E1000E, which is not supported for RecordReplay FT.  If this is the case can you please try with another network card and see if it helps.

  If this is not the case, can you please upload vm-support bundle or file a support ticket.

  Thank you

  Pradeep

• Active directory Migration from Windows Server 2003 to Windows server 2012

  Hi all

  Currently, I use the windows Server 2003 R2 Enterprise SP2 with AD, DNS and DHCP server. I want migration of these services to new fresh Windows Server 2012 R2 Standard machine. I migrate to active directory after this statement: http://social.technet.microsoft.com/wiki/contents/articles/22249.migrate-active-directory-from-windows-server-2003-r2-to-windows-server-2012-r2.aspx, he gets with success, but the IP configuration on the source server not migrated to the destination server. So, all of you know that why the source server IP configuration cannot migrate to the destination server?

  Help please give me an advice.

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Need to buy R2 Windows Server 2012

  Hello

  I have a small business and want to host and manage my own website.

  I downloaded and tried the trial version of windows server 2012 R2 and continue with it.

  Looking at the structure of the price that I got confused there are several option about the licenses.

  All I need is to manage

  1 - My Web hosting to businesses.

  2. DNS management

  3 - remote Desktop to connect to the server.

  Please can someone advise what would be the best option for me to buy the server without spending too much money.

  Thank you

  Server issues are better managed to the:

  TechNet forums - Windows Server 2012 General - Microsoft

  Kindly ask here.

• Windows Server 2012 R2, R2 2008 update 12/08/2015 disabled asp classic download

  I have a Windows Server 2012 R2 and Windows Server 2008 R2 running native IIS.

  The web server allows downloading files using just classic asp... no plug-ins or third-party add-ins.

  The two servers installed updates 09/12/2012 off the capacity of the web server to download files using classic asp. The base for the download method was created by freeaspupload.net, who has since disappeared.

  I rolled back these updates and downloading files works again.

  I can't be the only one stuck with a legacy application that needs this feature.

  Anyone?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows server 2012 r2 backup

  Hello

  I have a Windows server 2012 r2 and I m using the Windows backup to do the backup of 10 TB, I perform incremental backups, but I have a problem, any windows decides to perform a full backup of random times, he needs 60 hours to do a full backup for this reason, it is a serious problem for my.

  I need to know how to disable this full backup to chance.

  Thank you.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Shared drive file Windows Server 2012 r2 access VERY slow

  Every time I open a file that is located in a shared folder on a drive with r2 Windows Server 2012 (videos and PDF with graphics, in particular), says file takes forever to load, videos often stutter, etc.. This affects all computers connected to the field with access to these shared folders/drive. Is there any solution for this? I couldn't find one so far.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• PERC H700 driver during Windows Server 2012 r2 - disk Raid not recognized not

  Hello

  I try to install a r2 Windows Server 2012 to a Poweredge R710 with a Raid Perc H700. 2 HDD in Raid 1, but the HARD drive is not rcognized Italian Installation even if I try to use the 2008 r2 for the Perc Raid driver. They are listed, but if I select one disk HARD are not visible. What should do?

  Best regards...

  Grolle,

  Leave in the Raid Controller, what is the status of the table? In addition, was the raid 1 initialized after being created? If this isn't the case, then, who will have to be done before you try to install.

  If you download this and start on the lifecycle controller (F10) and then select deploy BONES, load these files there and proceed with the installation of the OS.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=M5VGR&FILEID=3325059394&osCode=MWS80&ProductCode=PowerEdge-R710&LanguageCode=en&CategoryID=DD

  I would like to know how will install it.

• R2 Windows Server 2012

  Hello

  I use windows server 2012 r2 and have some difficulty at the start of services such as, AenService, gupdte, the windows module installer does not start, I tried to start it manuely but the result was the same, please give me the solution

  Concerning

  Jean baby

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Just bought Wndows Vista and having problems with the port for Palm 125

  I just bought a Windows Vista-based computer and have problems with getting my 125 Palm to synchronize with the desktop computer.  I get an error message saying: "No available Com1" what should I do?

  Thank you

  Frustrated

  Don't ask me the procedures step by step that I did, but I finally success!  I uninstalled Palm Desktop and started from scratch.  I unplugged the Hot Sync cradle by the USB port, then I installed Palm Desktop from my drive and then update Palm Desktop on the Palm for Palm M125 site.  It still does not, I manually added a port and manually changed to COM1.  I then pressed the Hot Sync button and in the Device Manager, a folder has become available "device named" with Palm Desktop as a subfolder.  It is always active, I updated my computer for Palm USB driver.  Miraculously it worked.  Thanks for your help, but as usual everything it needed, it was patience and trial and error to solve the problem, since it does not seem to be a quick fix related this topic.

  Message relates to: Palm m125

• Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem

  I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.

  I want to connect the printer via USB only.

  I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.

  But every time the same problem occurs.

  The printer driver is correctly installed, but the printer HP (LEDM) driver failed.

  The debugging information:

  Installed the device.

  hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219

  If I want to reinstall the driver again, I received the message:

  Setup error

  An entry in the Inf file is missing, the file may be Windows 95...

  Could you please help me, how to solve this problem?

  I need to activate the visual experience of Windows Server 2013, then the USB works

• I am running Windows Server 2003 R2 and am having a problem with a user profile.

  I'm running windows server 2003 r2 and am having a problem with a user profile, we have a logon.bat file that runs to map drives, but also call a logon.html file, that user gets the logon.html appear, but IE blocked then this happens only for a single user, others are ok. Any ideas please?

  original title: profile of Win 7 issue

  Hello

  Your Windows 2003 R2 server question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  Hope the information is useful.

• ProLiant DL320e with Windows Server 2012 Bluescreen

  Hello

  I installed Windows Server R2 with smart supply a Proliant DL320e Server 2012 R2 and it bluescreens much. The blue screen message is a pretty no description "KERNEL_SECURITY_CHECK_FAILURE".

  I installed a second Proliant DL320e server and it shows the same behavior, so I conclude that this isn't a defective hardware.
  
  I found some knowledge which mentions screens blue and with the driver for Smart Array
  http://h20628.www2.HP.com/km-ext/content-webapp/document?docid=emr_na-c03793656 & DTD = default & local = d...
  But the update and version numbers do not match.

  Drivers, software and firmware for the HP DL320e Gen8 ProLinat Server Page did not all downloads for my OS-, but it displays a warning that it is experiencing problems.

  I tried to fill in the HP Support Assistant, but I got an email in response, telling me that they are currently unable to help with e-Mail support.

  The servers are offline on a clients site in a restricted environment so that they lack updates online.
  
  During this time, I downloaded the SPP Service Pack for Windows Server
  FTP://FTP.HP.com/pub/softlib2/software1/CD-generic/p652182553/v84427/SPPMDSLWIN2013090.2013_0830.7.i... and today, I'll try if it corrects the blue screens.
  
  Does anyone have pointers?

  Take care

  Martin

  Thank you, I have not found this forum. If an admin could move it which would be best.

  Just in case anyone else has this problem is this question:

  I contacted HP by telephone support and the solution is:

  Do not use smart supply when you configure your server, it is not supported and it will be randomly bluescreen with Windows Server R2 2012. You must install windows directly, so take your storage driver and copy it to a usb key and load the driver during the installation of windows. In my case I needed to use the mass storage drivers for Windows Server 2008 R2 from http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5293151 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253DMTX_9b5424c852a54e49b501e280e5%257CswEnvOID%253D4064%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Take care

  Martin