Windows Server 2012 lost connectivity

Similar Questions

• After moving to Windows server 2012 VPN connection error

  Hello world!

  Recently, I upgraded my Windows Server 2003 SB server to a new server running Windows Server 2012.

  I started from scratch by creating a new domain, user, accounts etc.

  The new server is using the same IP address as the old server.

  Since then, I can't connect through the VPN. I have already added the role of remote access on the new server.

  When I try to connect to my Windows 7 laptop, I get this error:

  "Error 800: the remote connection does not because attempts VPN tunnels failed." The VPN server is maybe inaccessible. "If this connection tries to use an L2TP/IPsec tunnel, the security settings required for IPsec negotiation is may not configured properly."

  Any help with this is appreciated.

  Hello

  The question you posted would be better suited in the TechNet Forums. We have a separate team working on the server problem, so I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt

  Hope this information is useful.

• Remote access Windows Server 2012 through internet with desktop connection

  Summer messing about with it for days and don't get no love.

  Try to connect with Windows 7 Ultimate edition to Windows Server 2012 Data Center version from outside my home network, Starbucks or McDonald's or my server at home.

  Tried all these steps found in this promising and useful article:

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  1. Allow connections to the computer you want to access remotely. DONE - ADDED to THE SERVER AND NON-ADMIN ACCOUNT to RDP GROUP of ROLES, using network level authentication. Connection of Win 7, so this method of authentication should not be a problem, I assume.

  2. Make sure that remote desktop is able to communicate through your firewall. DONE - FOR BOTH PUBLIC AND PRIVATE RULE.

  3. Find the IP address of the computer on your home network you want to connect. MADE - by using the ipconfig/all command

  4. Open your router configuration screen and worms forward port 3389 for TCP IP address of the destination computer. DONE - NOT TCP/UDP but TCP only, internal and external port goes. Note: The use of a booster signal wifi at the end of the House, it is a problem that requires additional configuration? I don't think he has an ip address or acts as a router. But in desperation I can try unplugging then again head the local Starbucks to try to connect.

  5. Find the IP address of the router so that the remote desktop can be found on the Internet. DONE - using "what is my ip", pretty easy.

  6. Open Remote Desktop connection, and connect. ACTUALLY, I think THAT, IN ENTERING [ip router]: 3389.

  But the result of the message is always the typical:

  (1) remote access to the server is not enabled.

  > But this is not true, that I am capable of the DRC at home on the server machine.

  (2) computer remote is not off.

  > But this is not true, as I just left home 30 minutes and sometimes it's rarely, only restarted.

  (3) the remote computer is not available on the network.

  > Don't know what that means. Of course the remote computer is not on the network, I am on right now. It's on my home network. But I can ping my router ip via cmd, then coming to the outside can be done; through my router, I should be able to access inside my home network port forwarding w. But no love.

  So... what to do, what to do...

  The wifi booster is a problem?

  Connects to the Data Center edition a problem?

  What happens if I uncheck the option ' use authentication NLA, is that the passage of the security risk?

  Any ideas about the configuration I could be missing before giving up and go for VPN or TeamViewer. I would really like to see materialized during all the time that I put in trying to run the DRC.

  Thanks for any input.

  / Markus

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Level broker for connections to windows server 2012

  Dear,

  I would like to know if there is any risk that the upgrade of the OS of the server holding the broker for connections, web access and management of the profile of windows server 2008 R2 to windows server 2012 or more to enable support of HTML5 connector? Please tell us what is the scenario for these updates.

  Concerning

  Hi Habibgha,

  Hoping to upgrade the OS on-site? It should work, but I don't know if it has been tested. Assuming that your infrastructure servers are virtualized, perhaps you could take a snapshot or clone this virtual machine and try in a lab environment?

  Or you can work on a step-by-step approach, the first stage being, if your current farm is 8.0.1 you can upgrade all roles on your current server on 2008 R2 for vWorkspace 8.5, then build a new VM with 2012 R2 and install IIS and access to the Web of vWorkpace role. Create a new vWorkspace site web access on the new server just for the connector of HTML5.

  I hope that helps!

  Thanks, Sam

• How can I get Windows Server 2012 Essentials recognize my HARD drive when you turn an external HARD drive in a drive HARD internal storage?

  I recently had a pool of storage space using 3 external drives USB 3.0 in Windows Server 2012 Essentials.  I decided to take the readers out of the enclosure and connected directly to the internal SATA connectors on my motherboard.  When the server was launched upward, these 3 discs now display as disconnected in storage.

  When I do the command 'get-disc' physical in PowerShell, the drives appear as "drives physical 1,2 & 5" and are 2.72 to each. "."  But it also lists disks Seagate Expansion as well, with a status of "communication lost".  These are the same three disks that are now internal.

  Nothing has been deleted or erased, so all the data is still on each individual unit and assume that if I managed to put back them in the external enclosure, would immediately online.  I thought that everything simply moving them to a new HARD disk controller (internal SATA USB) would not cause the pool to drop the readers, they are always connected to the same server.

  Is there a way to get storage space to see and read the 3 internal drives to bring my pool/area back online without losing any data?

  Server experts are found in the forums below.  The forum you are now is for questions to the consumer of Windows, not Windows Server issues:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Install OfficeJet Pro 8610 on Windows Server 2012

  Hello

  I'm trying to install the drivers for a Pro OfficeJet 8610 on a system running Windows Server 2012. I installed the drivers from here (after choosing Windows 2012 for the operating system): http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-8610-e-All-in-One-Printer-series/53...

  First of all, I tried to install using the GUI (Setup.exe) but ran into an error indicating that the operating system was not compatible.

  I did some research and discovered that these drivers must be installed by using the command line and the command msiexec.exe. I tried to do it by using the following command-line (with administrator privileges): msiexec.exe /i PATHTOMSI

  However, when I do that, it gives me ALWAYS an error of incompatible operating system. Don't know what to do here.

  Here is a link to the Post on the HP Forum explaining the need for a command line install: http://h30434.www3.hp.com/t5/LaserJet-Printing/installing-Pro-8610-Windows-server-2008rt-X64/m-p/426...

  Thank you.

  I ended up soliving this problem myself while tinkering around.

  I went through the process of adding a new printer through the devices window and printers.

  I said my printer was not listend so opted to manually configure a printer. I have created a new local port and he just called the name of the printer. He then invited for drivers. I chose the disc and then navigated to the folder where I had extracted the printer drivers. Selected this file and the drivers installed.

  This example gets the drivers installed in the system. Windows should then automatically recognize/install the printer if it is plugged.

  Mind you, I had to do that only for printing on a desktop connection remote. If you need the real HP software installed to print AND scan, this will not work for this.

• Windows Server 2012 Standard Activation failure

  Hi MS supports,

  We have two Windows Server 2012 Standard which must be activated with the information of the right at the bottom of the windows desktop as shown in Figure 1.

  Then, I run the command slui and enter the product key to activate as shown in figure 2.

  Unfortunately, I got an error with already shown as Picture 3.

  Note,

  • I called the Activation Center as indicated in picture 4 in Norway to attempt activation by phone, but the CSR told me that they cannot generate the confirmation ID to activate the operating system.
  • The server is not connected and cannot be connected to the internet for internal use only.

  Can I have your help to solve the problem? and I also need to know the impact if it is not enabled.

  Thank you.

  Figure 1:

  

  Photo 2:

  

  Photo 3:

  

  Photo 4:

  

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Supported Windows Server 2012 r2-dual monitor

  Hi all

  I'm trying to become more proficient with Windows Server OS.  I installed Windows Server 2012 r2 on an older laptop (HP ProBook 6565-b) of the mine because the base OS (not remote communication in).  I'm wanting to add a second monitor to this machine, for either extending display, or simply duplicate, if I close the lid-if I can use my screen a lot nicer, bigger than what is connected to the laptop.

  I read through all the posts on double monitor support for Windows server, but have had no luck so far with suggestions that I have ad (updated & reinstall the drivers, etc..).  I also had a cheap USB to VGA external video card (Startech.com) I tried to use... no luck.  Before I installed Windows Server 2012, I got this working environment in Windows 7 and 10 on this laptop, so I think the graphics card is supported?  I wonder if this is even possible or if I'm wasting my time?

  Any idea on how I can make this work would be greatly appreciated.

  Thank you.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Thumbnail option does not work in Terminal Server in Windows Server 2012 and server session

  This might be a stupid question.

  We have two Windows server 2012 R2 - TS and DC. The clients are connecting to TS and access the shared network drives present in DC. I always unchecked 'show icons, never thumbnails' and 'Show thumbnails in System Properties' enabled on DC and the two TS.

  No always thumbnail option.

  You will need to click on each image. Users have many files containing multiple images. It's annoying to click and view each image.

  Note: NO GPO is configured to block it. Checked.

  I can't find any object GPO to allow this option to be :)

  More info. For customers, anywhere, whether network shares or all folders in TS session. It does not work. Also tried painting and Windows Photo Viewer.

  Here, any help will be very appreciated!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2012 BEX problem

  Hello, I got Windows Server 2012 and VPS, I am connected by DRC, turned on my Tibia & Bot and 'close this window of DRC' after... 20 ~ minutes...

  Problem signature:
    Problem Event Name:   BEX
    Application Name: Tibia.exe
    Application Version:  10.9.3.0
    Application Timestamp:    5726e97b
    Fault Module Name:    Tibia.exe
    Fault Module Version: 10.9.3.0
    Fault Module Timestamp:   5726e97b
    Exception Offset: 00362276
    Exception Code:   c0000409
    Exception Data:   00000007
    OS Version:   6.3.9600.2.0.0.16.7
    Locale ID:    1033
    Additional Information 1: e6cc
    Additional Information 2: e6cc222ab84bf53679fea9a972cf2b2b
    Additional Information 3: 996a
    Additional Information 4: 996a8ba1334d6fb9f6300d6752909e6d
  
  Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=280262
  
  If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
  

  Can U help me?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• One user away from the dashboard of the range Windows Server 2012 R2 Essentials

  We migrated from SBS 2008 for Windows Server 2012 R2 Essentials range. All users and computers have successfully migrated and their list is visible in the ADUC.

  However, a user is missing from the Windows Essentials Dashboard (users in the navigation bar, tab users).

  The user can work normally: connecting to Active Directory, it can see shared folders and so on. But it is not in the list above. Because of this, it cannot be administered in the dashboard (for Windows Server Essentials).

  What can be the problem? How can get us in the list? What other information should we supply for you to find the answer?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2012 R2 Request Time Out

  I installed Oracle Linux 7 use of Hyper-V on Windows Server 2012 R2. When I connect the Oracle Linux for internet (parameters--> network--> then set the device to run the internet), Oracle Linux takes the entire internet server and also indicates "Request Time Out" while that ping using command line on Windows server.

  Is it possible that I can fix this or can anyone help me solve this problem? Very Important and Urgent. Please help me.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Can not reduce the brightness or can change the screen resolution to double screen in windows server 2012 R2.

  Hello Experts

  I'm new to this community and please forgive me if I hurt all over.

  Use windows server 2012 R2 on my laptop (previously I was using Windows 7 Home premium), now I cannot able to reduce brightness or can change the resolution of the screen to double (I want to connect my laptop to a bigger screen using VGA cable).

  Everything was fine using Windows 7. But after the installation of the server, I am facing this problem.

  Please help me.

  Hello

  I suggest you post your query on the TechNet forums to get help. Consult the following link:

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=winserver8gen

  It will be useful.

• Need to buy R2 Windows Server 2012

  Hello

  I have a small business and want to host and manage my own website.

  I downloaded and tried the trial version of windows server 2012 R2 and continue with it.

  Looking at the structure of the price that I got confused there are several option about the licenses.

  All I need is to manage

  1 - My Web hosting to businesses.

  2. DNS management

  3 - remote Desktop to connect to the server.

  Please can someone advise what would be the best option for me to buy the server without spending too much money.

  Thank you

  Server issues are better managed to the:

  TechNet forums - Windows Server 2012 General - Microsoft

  Kindly ask here.

• Windows Server 2012 - error 80240440 in windows update

  I finished a completely new installation of Windows Server 2012 R2 on an SSD fully formatted in a new server Dell T20. Installation seems successful outside of Windows Update, the inability to run, the slightest error in the error 80240440, which seems to indicate that the remote connection has been terminated. I checked that other PC (Windows 8) can successfully run Windows Update, it seems that the problem is limited to this Server 2012 machine. Anyone can suggest a solution or approach I want to install other software, until the installation works properly.

  Hello

  Please post your question here:

  https://social.technet.Microsoft.com/forums/en-us/home