Windows Server 2012 Standard Activation failure
Hi MS supports,
We have two Windows Server 2012 Standard which must be activated with the information of the right at the bottom of the windows desktop as shown in Figure 1.
Then, I run the command slui and enter the product key to activate as shown in figure 2.
Unfortunately, I got an error with already shown as Picture 3.
Note,
- I called the Activation Center as indicated in picture 4 in Norway to attempt activation by phone, but the CSR told me that they cannot generate the confirmation ID to activate the operating system.
- The server is not connected and cannot be connected to the internet for internal use only.
Can I have your help to solve the problem? and I also need to know the impact if it is not enabled.
Thank you.
Figure 1:
Photo 2:
Photo 3:
Photo 4:
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
TechNet forums:
https://social.technet.Microsoft.com/forums/en-us/home
MSDN forums:
https://social.msdn.Microsoft.com/forums/en-us/home
See you soon.
Tags: Windows
Similar Questions
-
Windows Server 2012 Standard activation
I just bought PowerEdge T110 II with Windows 2012 Standard operating system.
It come with preinstalled OS? is activation required? Last time I bought Dell is Dimenstion 8400 with Windows XP, which was related to the Dell motherboard, so activation was not necessary.
I will probably play with the installer and try different things before I install OS for the long term. If activation is required - reinstall OS more than once on the same box is problem? My knowledge of the client MS OS-es, that's fine, but I don't know anything about the servers.
"Is reinstall several times on the same hardware ok?
Yes. The servers are not different here: it uses the same activation mechanism.
-
How to configure the LDAP connector in windows server 2012 R2 Active Directory?
How to configure the LDAP connector in windows server 2012 R2 Active Directory?
Hello
Please post your question in Server TechNet Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Downgrade Windows Server 2012 Standard ROK to Windows Server 2008 R2
Hi Helpdesk,
We are facing problems of decommissioning Windows Server 2012 to Windows Server 2008. We contacted your local helpdesk in Saudi Arabia, but we do not have adequate support. Please, help us to downgrade the license and we are in a huge pressure to activate this server and bring it to production.
Kind regards
Mohamed Shaji.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
Windows Server 2012 R2 activation problem
I'm a system administrator. Has been released a DVD, said to go and install servers.
With the help of our key, I installed Server R2 Standard correct 2012.
When I activated the host, I entered the key and told me
This key didn't work, please check it and try again, or try a different key.
I looked in our MPN portal and is the only key I. Therefore: time to call Microsoft.
What is the information they want?
We are good. The boss looked MPN and found in Lo!, we (they) use all of our licenses of R2.
Time to come out of the CSA of credit.
-
Windows Server 2012 Standard File Sharing - access denied?
So I have a simple Pentium Dual core server here, and I'm putting in place local file sharing. For some reason any however I can't write files on the disk, even when you sign in as administrator of any computer in the network.
I've been Googling the problem for hours and I found something on the deactivation of the audit, I did in secpol.msc, but I tried to disable it, and it will not always grant access.
Is something directly above my head, or is it a problem in the file sharing himself?
Sorry if I'm not providing a lot of details here, but I'm really frustrated about that. If you need any further information I'll post fortunately.
Thank you for your time for reading.
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
Original title: licenses
Hello
I installed Windows server 2012 standard R2 and for Windows server 2012 ROK Standard license 2CPU/VM.
Windows has not activated this license.
Fact R2 support Windows standard server 2012 (Windows server 2012 ROK Standard 2CPU/VM) license?
Thanks in advance!
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
vCenter Simple install on Windows Server 2012
Hello
I try to install vCenter with Simple installation on an instance of Windows Server 2012 Standard virtual.
But the installation completely hangs when installing SQL Server 2008 R2 on the vCenter Single Sign On package installs.
Progress of the installation comes to: Install_sql_engine_core_inst_Cpu64_Action and a stand for a couple of hours now and no activity of the CPU on this process.
I will attach a screenshot.
Its not so bad. I did several times. What to install. Ex: SSO, the inventory Service, vCenter Server and web client is enough car radio.
Well, I would consider making the following if you have an existing database of VC.
-Take the DB backup file.
-Install SQL and restore the DB on the new server.
-Install the VC and connect ODBC etc...
-
Installation failure: EBS R12.2.5 on Windows Server R2 Standard 2012
Hello
I install EBS R12.2.5 VISION Instance on Windows Server 2012 R2 Standard, that is certified. I downloaded the media and made the scene and complete the prerequisites.
I installed it, under Tools before building the stadium and run rapidwiz
- Microsoft Visual Studio Express 2013 for Windows Desktop ()Doc ID 1330706.1()
- Cygwin (Doc ID 414992.1( )
Then build step, all right.
Checked it the rapidwiz version:
C:\stager122\startCD\Disk1\rapidwiz > RapidWizVersion.cmd
Oracle E-Business Suite quick installation wizard
Version 12.2.0.50
(c) copyright 2000-2011 Oracle Corporation. All rights reserved.
Press a key to continue...
Then I run the RapidWiz.cmd to install...
at 29%, I got an error, the error detail is given below:
C:\Users\ADMINI~1\AppData\Local\Temp > C:\stager122\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java - cp C:\oracle\app\VIS\fs2\inst\apps\VIS_srcebs\temp\ASInstallHome\fnd\... \j11067592_fnd.zip; C:\oracle\app\VIS\fs2\inst\apps\VIS_srcebs\temp\ASInstallHome\fnd\java\3rdparty\stdalone\xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=C:\oracle\app\VIS\fs2\EBSapps\appl\admin\VIS_srcebs\-Doracle.apps.fnd.txk.runtime.config=C:\oracle\app\VIS\fs2\inst\apps\VIS_srcebs\temp\xmldocs\instASpatches.xml oracle.apps.fnd.txk.config.InstallService
Fatal error: T2K install Service
oracle.apps.fnd.txk.config.ProcessStateException: FileSys OS COMMAND Failed: out = 3 see the log file for more details. CMD = cmd /c rmdir /s /q C:\\oracle\\app\\VIS\\fs2\\FMW_Home\webtier\OPatch # node = NodeId = 1698 Type = 24 TypeName = filesys_patch_action Name = RefId = State 901 = init ConfigDoc = APPS_OHS_HOME ParentDoc = null topology = R12 Action = os_cmd
at oracle.apps.fnd.txk.config.FileSysPatchActionNode.doFileSysOSCmd(FileSysPatchActionNode.java:169)
at oracle.apps.fnd.txk.config.FileSysPatchActionNode.processState(FileSysPatchActionNode.java:101)
at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)
at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)
at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)
at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)
at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)
at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)
at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)
at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)
C:\Users\ADMINI~1\AppData\Local\Temp > if 1 == 0 goto: INSTAS_OK
C:\Users\ADMINI~1\AppData\Local\Temp > echo cannot install specific patches
Can not install the unique patches
RW-50010: error:-script returned an error: 1
RW-50004: Error Code when you run the external process. Check the log file for more details.
APPL_TOP install the driver running for instance SCREWS
I tried many things, re-download the error also, but always the same media.
Kindly help me.
Thank you and best regards,
Waqas
With the help of VMWare he can't.
Using Oracle VM VirtualBox, as successful.
-
Active directory Migration from Windows Server 2003 to Windows server 2012
Hi all
Currently, I use the windows Server 2003 R2 Enterprise SP2 with AD, DNS and DHCP server. I want migration of these services to new fresh Windows Server 2012 R2 Standard machine. I migrate to active directory after this statement: http://social.technet.microsoft.com/wiki/contents/articles/22249.migrate-active-directory-from-windows-server-2003-r2-to-windows-server-2012-r2.aspx, he gets with success, but the IP configuration on the source server not migrated to the destination server. So, all of you know that why the source server IP configuration cannot migrate to the destination server?
Help please give me an advice.
Thank you
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
TechNet forums:
https://social.technet.Microsoft.com/forums/en-us/home
MSDN forums:
https://social.msdn.Microsoft.com/forums/en-us/home
See you soon.
-
Windows Server 2012 R2 Standard Radius Client support
Hi team,
In 2012 R2, the NPS Service server used for authentication. It uses the Radius Clients as authenticator. There is no online documents about the number of clients supported by the Windows Server 2012 R2 Standard Edition and Datacenter. Might well want to mention the number of clients supported by the version
Thank you
Sudhakar
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Windows Server 2012 Foundation - installation of recovery DVDs - Activation question
Hi all
Please could you help me with the following text:
After the installation of Windows Server 2012 Foundation of Fujitsu Operating System Recovery DVD Fujitsu server activation does not work. Error code: 0xC004E003, Error Description: The Software Licensing Service reported that license evaluation failed.
Thank you
Ivo
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers) -
Error activation product key has been used already on Windows Server 2012.
Original title: Activation error
Two days ago, I installed windows server 2012 on my PC... It has been corrupted because of virus on my USB key that I reinstalled it twice but both times, it has been corrupted... when I installed it third time Activation has failed, it is said that this product code was used on another pc... no activation now please help me... and one thing I've never done any material change
Try the phone activation, you may have to do during the week:
1. press the Windows key + X , and then click run, and then type: slui.exe 4
2. then press the ENTER"" key.
3. Select your "country" in the list.
4. choose the option "activate phone".
5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
6. explain your problem clearly to the support person.
-
MMC.exe APPCRASH
When I try to open Active Directory users and computers in Windows Server 2008 Standard, I get the error message below. Kindly help
Problem event name: APPCRASH
Application name: mmc.exe
Application version: 6.0.6001.18000
Application timestamp: 47918d 09
Fault Module name: KseAdm.dll
Fault Module Version: 6.0.1262.1064
Timestamp of Module error: 49426cbb
Exception code: c0000005
Exception offset: 0004 849 d
OS version: 6.0.6001.2.1.0.272.7
Locale ID: 1033
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
I get this question during the Oracle 12 c Installer (Windows Server 2012) Network Infrastructure:
[INS 32148] The execution of the script "Install IM" on the nodes failed: [node2]
--------------------------------------------------------------------------------------------------
Action - review the log to the file "C:\Program Files\Oracle\Inventory\logs\installActions2016-02-16_02-19-24AM.log" and 'C:\App\12.1.0\grid\cfgtoollogs\crsconfig\rootcrs_ < nodename > _ < timestamp > .log' for more details if an error occurs. More details
Execution of the IM installation script is successful on the nodes: the GI run script install [nodeX1] is has failed on the nodes: [nodeX2] - PRCZ-2014 Exception details: cannot run the "C:\App\12.1.0\grid\crs\config\gridconfig.bat" command on the nodes 'nodeX2 '.
The execution status of the node failed: nodeX2
Errors
: Using the configuration settings file: C:\App\12.1.0\grid\crs\install\crsconfig_params|2016/02/18 05:08:54 CLSRSC-4000: Oracle Trace File Analyzer (TFA) collector is not supported on this platform. | [0 m: 2016/02/18 05:08:59 CLSRSC-363: prerequisite user during installation ignorered |] [0 m | 5:09:04 > Started | 5:09:04 > arguments 2 | 5:09:04 > C:\App\12.1.0\grid\bin\crssetup.exe | 5:09:04 > installFence | 5:09:04 > WARNING: failed to remove imagePath, continues.] The operation completed successfully. | | 5:09:04 > return 0 x 02016/02/18 05:10:42 CLSRSC-507: the root script cannot continue on this nodeX2 node because node operations have not completed the nodeX1 node or there was an error in obtaining the status of the operations of the first node. | [0 m |] D. in C:\App\12.1.0\grid\crs\install/crsutils.pm line 3691.
Standard output
: Using the configuration settings file: C:\App\12.1.0\grid\crs\install\crsconfig_params2016/02/18 05:08:54 CLSRSC-4000: Oracle Trace File Analyzer (TFA) collector is not supported on this platform. [0 m 18/02/2016 05:08:59 CLSRSC-363: prerequisite ignorered user during installation [0 m 05:09:04 > started at 05:09:04 > arguments 2 05:09:04 > C:\App\12.1.0\grid\bin\crssetup.exe 05:09:04 > installFence 05:09:04 > WARNING: delete imagePath, continuous failed.]] The operation completed successfully. 05:09:04 > return 0 x 02016/02/18 05:10:42 CLSRSC-507: the root script cannot continue on this nodeX2 node because node operations have not completed the nodeX1 node or there was an error in obtaining the status of the operations of the first node. [0 m died at C:\App\12.1.0\grid\crs\install/crsutils.pm line 3691.
--------------------------------------------------------------------------------------------------
Anyone know?
Thank you very much in advance
Hello
Why do you have the disks with different names and of different sizes?
Node1:
C:\Users\Administrator\Desktop\grid\asmtool>asmtool-Liste
ORCLDISK1 \Device\Harddisk1\Partition1 51197 M
ORCLDISKDATA0 \Device\Harddisk2\Partition1 M 30717
ORCLDISK3 \Device\Harddisk3\Partition1 M 30717
Node2:
C:\Users\Administrator\Desktop\grid>asmtool-Liste
ORCLDISK1 \Device\Harddisk1\Partition1 51197 M
ORCLDISK2 \Device\Harddisk2\Partition1 M 51197
ORCLDISK3 \Device\Harddisk3\Partition1 M 51197
People should be equal disks are shared, aren't they?
Kind regards
Marco
Maybe you are looking for
-
I just upgraded the OS to El Capitan v 10.11.5. My (5 TB) ntfs disk won't mount. Tried through the application disk utility and also diskutil command in the Terminal. Everyone knows the same?
-
Password for WRTG54 router wireless?
I share internet access with my neighbour via my wireless router. I have a password to access the router configuration, but you should know how to set a password, just him and I can use the router, but others cannot access the internet or get into m
-
Excessive process and wrong default programs
This all started with default programs, I accidentally made the most of open programs using a program by default called 'Windows explorer' and now I can't change it back. When I tried to restore it, I open explore to test if it worked, now the list o
-
computer can not find the recovery disk
I have a notebook G72-B54NR, I had my computer reset. When I tried to reinstall windows 7 with the 2 recovery discs, I get a message saying that this computer has not detected a recovery disk. Thank you.
-
Whenever I start my laptop I don't hear some scratching noise, then transferred directly on-screen menu start-up which displays Windows Startup Manager and can not go any further. Please help thanks