Similar Questions

• Update for Windows Vista (KB2633952) will not be installed. Receive Error 80070020

  Update for Windows Vista (KB2633952) will not be installed. Receive Error 80070020.

  KB2633952 is an option, not the security update. Feel free to hide it - especially if you do not live in Kaliningrad, Minsk (Belarus), Bahia (Brazil) or Fiji.

• Applications installed on Windows Server 2012 is not visible.

  Recently installed a few applications on Windows Server 2012 server by using Local Administrator id.

  When we connect using any user of domain/local, we are unable to find the application installed in the 'Apps' & If connect us with the id of the Local Administrator we can browse for apps.

  & if any what other domain/local user login he or she can see only a blue screen empty :(

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• PowerEdge 2850 Windows Server 2012 do not start

  Well, I have a PE 2850 that was loaded to the top with Windows Server 2012 at the beginning of the year last as part of our upgrade to Windows 7. Even though I know that Windows Server 2008 is the latest version of Microsoft to officially support the SCSI interfaces as RAID PERC 4E/DI included in the 2850 card, I was able to work around in first install 64-bit Server 2008 with the SCSI drivers and then doing an upgrade online to the 2012 server.

  Everything went fine for the last year and half, but when I got to work yesterday, the server had crashed and he was sitting on the screen of the BIOS with the following error message:

  Memory/battery problems were detected. The adapter has recovered, but cached data have been lost. Press a key to continue.

  I pressed on enter and the server started to move to a preparation repair screen Windows where the progress bar is not long about 80% of the way and then froze for more than an hour. Subsequent attempts to restart in safe mode led to the server of freezing for several minutes before restarting once more to this same error message at the Windows logo screen. I can pull up to the management of the RAID and see my partitions still there, and I even loaded my readers in an old PE 2600 to check consistency on the logical drives (no problem found). However, the old 2600 is 32-bit architecture and it won't try to boot into the operating system.

  At this point, I'm really just trying to get a full backup of my system. I don't mind getting a new server, but I don't want to keep throwing money at this old piece of 12 year of equipment without knowing if it works or not. The problem is that 2012 uses ReFS, and none of the recovery programs I found can access my logical volumes. Boot from the OS Installation disk in the recovery console doesn't work, because the OS disk does not include SCSI drivers native to be able to see the score of the OS or the data partition.

  I think I'll call a few services data recovery tomorrow, but I would check here for ideas first. Any input is greatly appreciated.

  Microsoft has removed native SCSI support with 2008 R2, but R2 2008 provided Dell drivers for the PERC. These drivers work for the installation of Server 2012 as well.

  Memory/battery message: all stop and order the memory of replacement for the controller RAID, 4D554 part number. Nothing related to the operating system won't work (installation, repair, etc.) until you do. This question is very specific to the PERC 4e/Di on the 28 x 0.

  The 2850 is not 12 years. First of all, he started 10 years ago to shipping.

• Installation of Windows Server 2012 does not start

  Hello

  I am trying to install windows server 2012 I downloaded from my MSDN subscription.

  I'm installing on HP 8100 Convertiable minitower.

  Loading files, then when the windows icon it just restart the computer, and he in an endless loop of Windows startup.

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I installed a new hard drive on my computer and re-loaded windows vista. Will not be installing SP1

  I installed a new hard drive and re installed windows vista. I can't install SP1 because it is not supported anymore. Can I install SP2?

  1. Learn how to install Windows Vista Service Pack 1 (SP1)
     http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx
  2. Learn how to install Windows Vista Service Pack 2 (SP2)
     http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Manually install the SP1 and SP2 then.

  The links above will advise you where to get the standalone etc versions.

• Windows Server 2012 does not seem to recognize the space between the program and files

  I installed 'R' in D:\Program Files.
  Then I need to install another application that must refer to this path and validate during its installation. Installation of the next application saying that there is a "Invalid Version of R.

  If I install R in the following directories, it is recognized and my next application installed successfully:
  C:\Program Files
  Files S:\Program
  D:\R

  Windows Server is not recognize the R application properly installed in "D:\Program Files." Windows runs into the space between "Program" and "Files" and put an end to the execution of this order.

  The application I am trying to install the message 'Invalid Version of R' returns because he can't run the command check correctly. Because nothing is returned from the R.exe, he is unable to continue. This issue seems to be related to Windows and once R.exe can be run correctly D:\Program files, I would expect demand to continue to install. Is anyway getting D:\Program Files to be recognized as the other 3 directories I mentioned?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I have the dv4032 sony camcorder which has worked on the old windows xp, but will not be installed on version 7

  have the dv4032 sony camcorder which installed on xp but will not install on windows 7 any idea

  You can try to make older programs run in this version of Windows and see what the Windows 7 Compatibility Center says of this unit.

  You can also try an internet search on it to see if there is any workaround solution suggested [which may allow the device works but with limits] windows 7 sony dv4032 camcorder

• Satellite A300-1QD - "Bluetooth Stack for Windows by Toshiba" will not be installed

  Hello

  My system: Vista 64 Home Premium

  I already have the option for bluetooth devices in my Systemcontroll, but no device is shown.
  So I downloaded official Toshiba Bluetooth stack. At first, it seems that everything is fine, but after the second window, when RFBUS is installed and shown in the popup system that it is redy for use, the installation will stop. I don't know what to do? If I cancel the installer at this point, the installer said that the installation has been successfully and I should restart my system. Done, but no device.

  If I install the Bluetooth monitor too, I can connect to my mobile phone.

  Do I need the monitor? What is my fault on the battery Installation?

  If you are using an external Bluetooth USB adapter that is not Toshiba, then use the Bluetooth software supplied by the product.

  Do you use an internal Bluetooth module or a USB Bluetooth Toshiba adapter then I recommend the following?
  -Remove the "Bluetooth Monitor" software.
  -Remove the Toshiba Bluetooth stack.
  -Version of stack Bluetooth download the x 64 of the last battery Bluetooth.
  -Install the battery Toshiba Bluetooth. Make sure that you do not cancel any window during the installation. Be patient.
  -Do not use the Bluetooth Control Panel icon. It is still available, but you can not always use.
  -To start the battery Bluetooth just double click on the Bluetooth system tray icon or run it by double-clicking
  Start-> programs-> Toshiba-> Bluetooth-> Bluetooth settings

• Visual studio express 2012 will not be installed

  Hi, I am running windows 7 64 bit. I am trying to install visual studio express 2012 and the installer says "another installation is in progress. Please wait for try again". What can I do to fix this?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• After that upgrade to 8.1 Windows printer driver will not be installed

  I upgraded my Windows 8 to 8.1 Windows System. Subsequently, I received a message saying that I had to reinstall my printer driver, I went on HP website and downloaded the driver for Windows 8.1. First of all, I uninstalled all the software and the drivers are already installed on my computer. Then I tried to install the new driver. I received this message: "the system cannot find the file specified." I have downloaded the driver from the HP site again and tried to install it a second time, but got the same message. My printer is HP Officejet Pro 8500 Wireless. Everyone knows about this problem?

  Hi lpage1975.

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear that you are having problems with getting your Officejet printer installed on your computer. I did some research on this problem and I found that you could be affected by a conflict with the old drivers and the new. The best way to remedy this situation is to download and run HP Officejet Pro software and driver removal utility. This utility will rub off any old HP software for your printer so that can do a clean install. Once you have all the old software removed, please click on the link for HP Officejet Pro Full Feature software and driver.

  Please let me know if you still have questions and I'll be happy to help you.

  Thank you for your time.

• Installation of Windows Vista disc will not re - install. "files required for installation are not available" error 0x8007045D code

  My computer is slow, so I decided to format the C drive and re - install Vista with the installation disc. I did it once before and it worked. This time, however, I tried to install it and once he got to the 'Copy files' section and "Expanding files" error message came up saying: "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007045D

  I tried to restart the computer, and restart the installation, but nothing does.

  I need your help please!

  It's an IO error.  Try to wipe the dvd with a soft cloth and then try again.  The drive itself may also need cleaning.

• Windows 8 will not be installed

  Purchased windows 8 PRO... could ever do install... got tired of playing with it and it distributed. Decided to try once again, purchased windows 8 base, will not be installed. He said that the computer will be restarted then installed to the point of 90%. The computer turns off and made 2 or 3 attempts to restart, then I get the message that says installation failed and the computer is restored to its original configuration. There is nothing to say why the installation failed. Have tried many times without success... tried to disable the antivirus, same thing. I am currently running windows 7

  Mel waltrip

  E-mail address is removed from the privacy *.

  See the following for you can try before you try to upgrade solutions:

  The upgrade from Windows 7 to Windows 8

• Configuration of Windows Server 2012

  Hello, I tried to configure Windows Server 2012 using vcac using vCenter. Clonening works, customizing of comments has started, but the virtual machine is often, so he needs a manual restart. That is documented in article kb 2048394 and 20373666. However Windows Server 2012 isn't a guest operating system supported according to the vcac matrix. I also noticed it is possible to install the agent of comments, but it does not call. So I wonder when Windows server 2012 will be fully supported and if there is a way to get comments running agent? Cheers, Thomas

  Hi Thomas,

  We will fully support Server 2012 as a guest in our version 5.2 operating system (scheduled for GA daily now).

  Dave

• Windows server 2012 on 2.0 (3 c)

  I see in the matrix of interoperability for 2.0 (3 c) fi fw windows server 2012 is not an operating system supported. Will it still work with a driver of some package?

  Is there a minimum firmware version FI in order to run windows server 2012 on B200 M3 or B440 M2?

  Thank you

  Hello

  I see in the matrix of interoperability for 2.0 (3 c) fi fw this server windows 2012 is not a supported operating system. Will it still work with a driver of some package? This will probably work, but you can see that the blade may not work as expected.

  Is there a minimum firmware version FI in order to run windows server 2012 on B200 M3 or B440 M2?

  Windows 2012 became taken in charge for these blades on firmware 2.0 (4)

  UCS HW and SW interoperability

  http://www.Cisco.com/Web/TechDoc/UCS/interoperability/matrix/matrix.html

  

  Please always evaluate the useful answers