Windows server 2012r2 essentials for datacenter

Similar Questions

• windows server 2012 essentials disk partitions

  I am to evaluate Windows Server 2012 Essentials for customers to small businesses.

  I use the trial version for testing purposes.

  My test server is a motherboard Intel S2600CP4, Intel P4000 chassis, E5-2630 CPU Xeon, Intel RS2BL080 RAID controller with 6 500 GB SAS drive in a RAID 5.

  The RAID volume is 2.7 TB as 1 virtual disk.

  2012 Windows refuses to create a partition greater than 2 TB.  I have converted the GPT volume during installation via 'diskpart '.

  Is the limit of 2 TB because of the evaluation of the operating system version or am I missing a step in this process?

  Advice or insight would be appreciated...

  Thank you

  Dan

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winserveressentials/threads

  Hope this information is useful.

• How can I get Windows Server 2012 Essentials recognize my HARD drive when you turn an external HARD drive in a drive HARD internal storage?

  I recently had a pool of storage space using 3 external drives USB 3.0 in Windows Server 2012 Essentials.  I decided to take the readers out of the enclosure and connected directly to the internal SATA connectors on my motherboard.  When the server was launched upward, these 3 discs now display as disconnected in storage.

  When I do the command 'get-disc' physical in PowerShell, the drives appear as "drives physical 1,2 & 5" and are 2.72 to each. "."  But it also lists disks Seagate Expansion as well, with a status of "communication lost".  These are the same three disks that are now internal.

  Nothing has been deleted or erased, so all the data is still on each individual unit and assume that if I managed to put back them in the external enclosure, would immediately online.  I thought that everything simply moving them to a new HARD disk controller (internal SATA USB) would not cause the pool to drop the readers, they are always connected to the same server.

  Is there a way to get storage space to see and read the 3 internal drives to bring my pool/area back online without losing any data?

  Server experts are found in the forums below.  The forum you are now is for questions to the consumer of Windows, not Windows Server issues:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• PC running XP cannot access shared Windows Server 2012 Essentials

  Hello, I'm having a problem with access to files shared on my Windows Server 2012 Essentials on my Dell Inspiron 1100 running XP Pro SP3 I changed all my computers in the workgroup of names to match NetBios servers and all my other computers have access to stocks with the exception of the Inspiron 1100 trying to access in the sharing I am told that I do not have access, I am not offered a prompt to enter a user name and password I am simply denied access. Does anyone know how to get around this problem or fix the issue fact XP and issue with Server 2012 or vice versa. I can access the server to office assistance remotely, but not shared folders which seems strange to me. I've already posted the same question on the TechNet site too since it's a server issue but I find that you can easily post there and receive no help, so that never but I find that almost every subject I posted here, someone has at least made an effort to help with your problem.

  In fact, I created a user account on the server and the XP client gave them both the same user name and password and now I have full access to server shares. I have often continue to try while you wait for answers and find my own solution.

• HP Officejet 7500 has compatibility with Windows Server 2012R2

  Dear team,

  I would like to know if the HP Officejet 7500 a is compatible with Windows Server 2012R2 since there is no drivers for this OS.

  Thank you

  Mega-Support,

  Thanks for posting.

  Under Windows, you can connect a printer to a computer via USB and be able to print. However, since there is no software for it on the HP site it's all what you can. Unfortunately, you will only be able to print using the USB method.

• Windows Server 2012 Essentials license key questions

  We recently had to reinstall a server running Windows Server 2012 Essentials.

  We have reinstalled the wrench out of the key Windows Server 2012 Essentials on Tower Server. This key worked for a few days. Then the server started to complain that the key cannot be used. When I enter the key in the key of Activation Windows field, a label in this text field indicates the key is valid, but when I click on the button Activate, after half a minute to process the application, it gives a 0xC004F01F error.

  We appreciate any help you can give on this.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Very slow to load on a Windows Server 2012R2 PowerCLI

  Hi all

  PowerCLI 5.5 is very slow to load on my Windows 2012R2 server, I did a few tests

  Test 1 - load the snap of PS on my worstation (8.1 for Windows 64-bit - SATA hard drive)

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 1

  Milliseconds: 871

  Ticks: 18717065

  TotalDays: 2.16632696759259E - 05

  TotalHours: 0.000519918472222222

  TotalMinutes: 0.0311951083333333

  TotalSeconds: 1.8717065

  TotalMilliseconds: 1871.7065

  Test 2 - snap of PS of load on a 2012R2 Windows Server not connected to the internet, check on CRL

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 51

  Milliseconds: 603

  Ticks: 516030768

  TotalDays: 0.000597257833333333

  TotalHours: 0.014334188

  TotalMinutes: 0.86005128

  TotalSeconds: 51.6030768

  TotalMilliseconds: 51603.0768

  
  

  
  Test 3 - support software component PS plug-in on a Windows Server 2012R2 not connected to the internet, check CRL disabled

  PS C:\Windows\system32 > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 16

  Milliseconds: 323

  Ticks: 163238507

  TotalDays: 0.000188933457175926

  TotalHours: 0.00453440297222222

  TotalMinutes: 0.272064178333333

  TotalSeconds: 16.3238507

  TotalMilliseconds: 16323.8507

  As you can see there is an improvement when I disable CRL checking in accordance with this article: http://blogs.vmware.com/PowerCLI/2010/01/troubleshooting-slow-startup-with-powercli-40-u1.html

  But I still have 16 seconds to load the snap against 1 second on my workstation (which has much less computer resources!)

  Any help is appreciated.

  Hi LucD,

  I've found a workaround:

  When I run the import-PSSnapin I noticed (with wireshark) a lot of traffic failed to WAN addresses, so I set myself, in Internet Options a false proxy (127.0.0.1), excluding the proxy DNS of my domain active directory name (so I can connect to the virtual center without going through the wrong proxy)

  Now is the time of execution:

  Windows PowerShell

  Copyright (C) 2013 Microsoft Corporation. All rights reserved.

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 2

  Milliseconds: 774

  Ticks: 27745259

  TotalDays: 3.2112568287037E - 05

  TotalHours: 0.000770701638888889

  TotalMinutes: 0.0462420983333333

  TotalSeconds: 2.7745259

  TotalMilliseconds: 2774.5259

  Not bad! Execution time lowered 16 sec at 2.8 sec

• Windows Server 2012R2 Task Manager

  We have a question about the Task Manager in Windows Server 2012R2.

  We have a client running on a Terminal Server, they want to use the Task Manager to kill a task that is not responding.

  By default, only the user can see all taks running, also other users.

  Is there a way to partially block it? Perhaps in a GPO?

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Please do not hesitate to contact us if you have other questions related to Windows.

• Trial of ISO Windows Server 2012R2 not start

  I downloaded Windows Server 2012R2 trial ISO file - named 9600.17050.WINBLUE_REFRESH.140317 - 1640_X64FRE_SERVER_EVAL_EN-US-IR3_SSS_X64FREE_EN-US_DV9. ISO.

  After burning by 12 Nero (and even Windows 8 image burning tool), I had only a README file. TXT file on the DVD disc,

  with the content of the text:

  This disc contains a "UDF" file system and requires an operating system
  This specification of the system supports the ISO-13346 "UDF" file.

  I tried first to boot from this drive to install Windows server 2012 R2, but I got the error message:

  Cannot find the BOOTMGR

  How can I solve this problem?

  Kind regards

  Zvi

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• VMware vCenter Server 5 Essentials for vSphe

  Ho una licenza VMware vCenter Server 5 Essentials for vSphere labor-intensive. Devo aggiornare UN host currently che ha una licenza di free vmware 5.

  -Posso installare versione 5.5U2 e usare the licenza in oggetto?

  -Can I download ed installare versione 5.5U2 o devo partire dalla 5.5?

  Grazie. Gianni

  Se you want to upgrade an ESXi 6 prima di tutto verificare che devi he tuo sia nella HCL di VMware Server: VMware Compatibility Guide: search system, check all the components, BIOS e controller compresi. SE aggiorni an ESXi 6 you attiva una versione 60 giorni di Enterprise Plus trial. In the meantime fai della licenza Upgrade alla versione 6 (to hai active UN contratto di supporto e following) e enter it shows.

  ISP attenzione durante aggiornamento, clear no I locali datastore: http://pubs.vmware.com/vsphere-60/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-60-upgrade-guide.pdf

• It is essential that I get as a basis for cloud computing if I buy Windows Server 2012 Essentials?

  In our small business we have Dell pc that we used as an exchange of mail for several years, and now we're looking to put new readers and also to get Windows Server 2012.  However, I said that I'd better get used to cloud computing as the main version "Will FORCE" do that to me...

  Is this correct?  What I want to do is have my 2 people connect and share files-, but not on a cloud?

  TMFXK

  Server questions should be asked on the Technet site

  http://social.technet.Microsoft.com/forums/en-us/home

• Windows Server 2012R2 KMS Activation Key - do not increase

  Hi all

  I managed to set our key KMS data center on a dedicated server of KMS in our Organization. The KMS server is published in DNS (nslookup-type = _vlmcs._tcp = all OK). I started to install different Windows ("autonomous" and facilities of VDI) 2012R2 servers, however the number of KMS does not increase even if I have activated at least 30 machines. Note that our facility is for key KMS data center of Windows Server edition 2012R2, no office or Win7/8/10 KMS key.

  The current number is set to "10" (all the time).

  I also tried to broaden the pool of the VDI, but the number remains the same.

  I did not CMID duplicate, I don't have a rogue KMS server (and clients are not directed to another KMS server - we have only a KMS server in our Organization).

  I also followed this post, but without success:

  https://blogs.technet.Microsoft.com/ASKCORE/2011/02/08/KMS-count-is-not-increasing/

  Thanks in advance.

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• Windows Server 2012r2 vs AcroRdrDC1500720033_de_DE.exe

  Hello!

  I'm putting a new battery of RDS, each Datacenter r2 Windows Server 2012 with the latest updates and installed the latest Acrobat Reader AcroRdrDC1500720033_de_DE.exe with the installation of MS remotedesktop tool.

  When I run the CD without a PDF file, I get error like the one below:

  

  When you open a PDF file it works fine... no error! Same situation with domain administrator rights or a normal user. Is not am major problem, but it is annoying me.

  What can I do?

  Welcome to the Germany

  Nico

  Hello Nico,

  I hope that you are not frustrated by the domain controller that is. This will help you: x https://www.faq-o-matic.net/2010/11/23/terminalserver-den-protected-mode-des-adobe-reader--abschalten /

  (Yes folks, I know, but this is an English forum, this article explains better how to solve).

  Quite the same thing, defined in the GPO rule to replace the value, and it works for all useres in the farm.

  If you have any other questions, Nico, feel free to contact me.

  Gerhard

• Windows Server 2012 Essentials

  Hello world

  I have a question, if I install windows 2012 r2 essentials, trial version of 180 days and she charges with

  Al Ma expects that I can buy the final license with again reinstall them the product.

  If anyone knows the answer I wil be very gratefull.

  Thank you

  Dimitry Alexie Alarcón Flores

  IT PROFESSIONAL

  Guatemala, Central America

  E-mail address is removed from the privacy *.

  E-mail address is removed from the privacy *.

  ++ 502 53084569

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• How to downgrade windows server 2008 r2 for Server 2003?

  I bought windows Server 2008 but license my workplace always use Windows server 2003
  How can I demote the Server 2008, Server 2003
  Give step by step instructions and all necessary means

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2003 / 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads