Windows Server 2012R2 Task Manager

Similar Questions

• Trial of ISO Windows Server 2012R2 not start

  I downloaded Windows Server 2012R2 trial ISO file - named 9600.17050.WINBLUE_REFRESH.140317 - 1640_X64FRE_SERVER_EVAL_EN-US-IR3_SSS_X64FREE_EN-US_DV9. ISO.

  After burning by 12 Nero (and even Windows 8 image burning tool), I had only a README file. TXT file on the DVD disc,

  with the content of the text:

  This disc contains a "UDF" file system and requires an operating system
  This specification of the system supports the ISO-13346 "UDF" file.

  I tried first to boot from this drive to install Windows server 2012 R2, but I got the error message:

  Cannot find the BOOTMGR

  How can I solve this problem?

  Kind regards

  Zvi

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• HP Officejet 7500 has compatibility with Windows Server 2012R2

  Dear team,

  I would like to know if the HP Officejet 7500 a is compatible with Windows Server 2012R2 since there is no drivers for this OS.

  Thank you

  Mega-Support,

  Thanks for posting.

  Under Windows, you can connect a printer to a computer via USB and be able to print. However, since there is no software for it on the HP site it's all what you can. Unfortunately, you will only be able to print using the USB method.

• Very slow to load on a Windows Server 2012R2 PowerCLI

  Hi all

  PowerCLI 5.5 is very slow to load on my Windows 2012R2 server, I did a few tests

  Test 1 - load the snap of PS on my worstation (8.1 for Windows 64-bit - SATA hard drive)

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 1

  Milliseconds: 871

  Ticks: 18717065

  TotalDays: 2.16632696759259E - 05

  TotalHours: 0.000519918472222222

  TotalMinutes: 0.0311951083333333

  TotalSeconds: 1.8717065

  TotalMilliseconds: 1871.7065

  Test 2 - snap of PS of load on a 2012R2 Windows Server not connected to the internet, check on CRL

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 51

  Milliseconds: 603

  Ticks: 516030768

  TotalDays: 0.000597257833333333

  TotalHours: 0.014334188

  TotalMinutes: 0.86005128

  TotalSeconds: 51.6030768

  TotalMilliseconds: 51603.0768

  
  

  
  Test 3 - support software component PS plug-in on a Windows Server 2012R2 not connected to the internet, check CRL disabled

  PS C:\Windows\system32 > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 16

  Milliseconds: 323

  Ticks: 163238507

  TotalDays: 0.000188933457175926

  TotalHours: 0.00453440297222222

  TotalMinutes: 0.272064178333333

  TotalSeconds: 16.3238507

  TotalMilliseconds: 16323.8507

  As you can see there is an improvement when I disable CRL checking in accordance with this article: http://blogs.vmware.com/PowerCLI/2010/01/troubleshooting-slow-startup-with-powercli-40-u1.html

  But I still have 16 seconds to load the snap against 1 second on my workstation (which has much less computer resources!)

  Any help is appreciated.

  Hi LucD,

  I've found a workaround:

  When I run the import-PSSnapin I noticed (with wireshark) a lot of traffic failed to WAN addresses, so I set myself, in Internet Options a false proxy (127.0.0.1), excluding the proxy DNS of my domain active directory name (so I can connect to the virtual center without going through the wrong proxy)

  Now is the time of execution:

  Windows PowerShell

  Copyright (C) 2013 Microsoft Corporation. All rights reserved.

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 2

  Milliseconds: 774

  Ticks: 27745259

  TotalDays: 3.2112568287037E - 05

  TotalHours: 0.000770701638888889

  TotalMinutes: 0.0462420983333333

  TotalSeconds: 2.7745259

  TotalMilliseconds: 2774.5259

  Not bad! Execution time lowered 16 sec at 2.8 sec

• Windows Server 2012R2 KMS Activation Key - do not increase

  Hi all

  I managed to set our key KMS data center on a dedicated server of KMS in our Organization. The KMS server is published in DNS (nslookup-type = _vlmcs._tcp = all OK). I started to install different Windows ("autonomous" and facilities of VDI) 2012R2 servers, however the number of KMS does not increase even if I have activated at least 30 machines. Note that our facility is for key KMS data center of Windows Server edition 2012R2, no office or Win7/8/10 KMS key.

  The current number is set to "10" (all the time).

  I also tried to broaden the pool of the VDI, but the number remains the same.

  I did not CMID duplicate, I don't have a rogue KMS server (and clients are not directed to another KMS server - we have only a KMS server in our Organization).

  I also followed this post, but without success:

  https://blogs.technet.Microsoft.com/ASKCORE/2011/02/08/KMS-count-is-not-increasing/

  Thanks in advance.

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• Server 2008R2 Task Manager will not run the task

  Hi all

  I have problems with automating a task on the server 2008R2, I have a limited user on my server which account is used to run a media server (Twonkymedia) and a home automation program called "Domoticz".

  Because I don't want the user to have access to the normal system resources, it always takes administrator privileges to run the program and access to the database, because I don't want to manually enter credentials of Directors whenever this user logs that I taught on the automation of this with Task Scheduler.

  I managed to create a task that toured to launch applications with admin credentialsb (simply by using the command runas in the path did not work) but once I connect and the still as the "limited" user task that has a shortcut placed in the startup folder does not start specific applications When I open the Task Manager to diagnose errors, she appears as running.

  Both users are given exclusive rights to start as a processing batch.

  22/08/2016 information information on the process created task 129 21:59:40
  Information 22/08/2016 21:59:40 200 Action started in f33c3a46-e705-408c-a675-08aabbecf4bb (1)
  22/08/2016 information 21:59:40 100 f33c3a46-e705-408c-a675-08aabbecf4bb launched task (1)
  22/08/2016 information 21:59:40 319 message task engine received to start the task (1)
  22/08/2016 information 21:59:40 110 task triggered by the user of information f33c3a46-e705-408c-a675-08aabbecf4bb

  The config is as follows;

  In general: it is set to run if the user is logged in or not, and it must run with the highest privileges.

  Its triggered when no user is logged on

  Actions are the following; Start a program

  Program 1: "C:\Program Files (x86)\Domoticz\domoticz.exe ' Arguments www - 1202 - 8000 sslwww

  Start in: "C:\Program Files (x 86) \Domoticz.

  Program 2: "C:\Program Files (x86)\Twonky\TwonkyServer\twonkytray.exe.

  Any idea what's going on here?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• IIS on Windows Server 2008 SP2 Manager error

  We would like to ask for your support on an issue that we have encountered on IIS 7.0.

  Our application is running on a Windows Server 2008 SP2 64-bit computer and uses ASP.NET 1.1.
  We intend to change the account used for anonymous authentication through the IIS Manager.

  However, we have encountered this error when you open the feature of authentication in IIS.

  ---------------------------
  Authentication
  ---------------------------
  There was an error during the execution of this operation. Details:

  Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.configError:

  Same error also occurs when you view other features of IIS.
  Hope you could give us some ideas on how to solve this problem.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows server 2012r2 essentials for datacenter

  As the title, is Hi possible to convert the essentials of windows server 2012 r2 Datacenter? I received a key from one of my friends and I want to activate it, but I don't know if this is possible.

  Thanks for help/read!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Windows Server 2012R2 - Bluescreen ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY

  Hello guys,.

  We have a problem with a windows server system, the operating system is windows server R2 with all updates.

  1-2-3 daily, the server crashed with a bsod.

  Switch us drivers, BIOS, disable services, change the swap file, change the material- but the problem is still there.

  In addition, 2 times the server crashed after I opened services.msc, coincidence?

  Here is some information:

  

  Ntoskrnl.exe ntoskrnl.exe + 1647ac fffff802 'd0a09000 fffff802' d1197000 0x0078e000 0x56509ee1 21.11.2015 17:42:09 Microsoft® Windows® NT Kernel operating system & 6.3.9600.18146 (winblue_ltsb.151121 - 0600) Microsoft Corporation C:\Windows\system32\ntoskrnl.exe

  

  Minidump: http://we.tl/FXuvMx9Mrj

  DUMP memory: http://we.tl/7BgHfum5WU

  Any ideas what the problem is?

  Best regards

  Jonas

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• checking windows process in Task Manager

  How can I check the process in the Task Manager to see what they really are, and if they are a problem
  or maybe a problem of Annozero?

  http://download.CNET.com/process-Explorer/3000-2094_4-10223605.html

  This will help you, read the guide to help.

  Or you can do a search for each process.

• Windows Server 2012r2 vs AcroRdrDC1500720033_de_DE.exe

  Hello!

  I'm putting a new battery of RDS, each Datacenter r2 Windows Server 2012 with the latest updates and installed the latest Acrobat Reader AcroRdrDC1500720033_de_DE.exe with the installation of MS remotedesktop tool.

  When I run the CD without a PDF file, I get error like the one below:

  

  When you open a PDF file it works fine... no error! Same situation with domain administrator rights or a normal user. Is not am major problem, but it is annoying me.

  What can I do?

  Welcome to the Germany

  Nico

  Hello Nico,

  I hope that you are not frustrated by the domain controller that is. This will help you: x https://www.faq-o-matic.net/2010/11/23/terminalserver-den-protected-mode-des-adobe-reader--abschalten /

  (Yes folks, I know, but this is an English forum, this article explains better how to solve).

  Quite the same thing, defined in the GPO rule to replace the value, and it works for all useres in the farm.

  If you have any other questions, Nico, feel free to contact me.

  Gerhard

• Windows Server 2012R2 replication errors

  Hi, just work through exams 2012R2 if it is in a lab environment, but would like some help on this one that I had trouble finding a solution on this one.

  Just to give you a little history, until recently, I had a single DC 2012R2 environment on my lab. About 6 months ago I had to follow the nets below to retrieve my DC after what can't that assume was an unclean shutdown of my host.

  http://blog.Shiraj.com/2014/10/how-to-fix-c00002e2-directory-services-could-not-start-blue-screen/

  https://support.Microsoft.com/en-us/KB/2751452

  I'm working through scenarios without problem until recently.

  I added a 2nd DC to the existing successful domain although while they inspected the State of replication I seem to come through a few questions in relation to the folder sysvol replica don't properly on the additional domain controller.

  The folder and subfolders are but empty during the 2nd DC.

  I run DCDiag on the original domain controller today, the majority of the tests pass ok (some have failed, but I transfer the roles, closing the vms on and outside, as I used it, but the below was obvious as I promoted the 2nd DC):

  There are warning or error events in the last 24 hours after the
  SYSVOL is shared.  Don't not SYSVOL replication problems can cause
  The Group of political problems. (from DCDIAG)

  I ran the monitor of the replication on the original domain controller health and get the 2 outputs following.

  1. the DFS replication service failed to recover from an internal database error on the C: volume. Replication stopped for all folders replicated on this volume until the database is automatically rebuilt. If the database is rebuilt successfully, replication will resume once the reconstruction is complete. If the database cannot be rebuilt, a separate event is generated. If you see this error more than twice in seven days, we recommend that you run Chkdsk on the volume that contains the database. Event ID: 2104

  2. the service stopped DFS replication on the C: volume replication. This failure can occur because the disk is full, the disc is a failure or a quota limit has been reached. Event ID: 2004

  I followed the discussions to try and resolve this problem without a bit of luck, I can also confirm that the disk is not full or failed.

  On the 2nd DC health is:

  This member is waiting for initial replication for replicated folder SYSVOL share and does not currently participate in replication. This delay can occur because the Member is waiting for the replication service DFS retrieve the settings from Active Directory Domain Services replication. After the Member detects that it is part of the replication group, the Member will start the initial replication.

  Where papers on the original domain controller I was also picking up the following event logs:

  Log name: Application
  Source: ESENT
  Date: 16/04/2016 13:51:57
  Event ID: 516
  Task category: registration/recovery
  Level: error
  Keywords: Classic
  User: n/a
  Computer: server.domain

  Description:
  \\.\C:\System Volume Information\DFSR\database_6A02_9B3F_29B_F67\dfsr.db SRBHT (1388): database \\.\C:\System Volume Information\DFSR\database_6A02_9B3F_29B_F67\dfsr.db: Page 46 (0x0000002e) due to a timestamp mismatch verification failure.  The timestamp "before" persisted in the paper of record was 0x10fbb, but the current timestamp on page 0 x 11004.  The update 'after' timestamp 0 11017 x which would have updated the time stamp on the page.  Recovery/restore will fail with the error-567.  If this condition persists then please restore it from a previous backup. This problem is probably due to a defective material 'lose' one or more colors on this page in the past. For further assistance diagnosing the problem, contact your hardware vendor.
  The event XML:
  
   
     
      516
      2
      3
      0 x 80000000000000
     
      7033
      Application
      Server
     
   
   
      SRBHT
      1388
      \\.\C:\System volume Information\DFSR\database_6A02_9B3F_29B_F67\dfsr.db:
      \\.\C:\System volume Information\DFSR\database_6A02_9B3F_29B_F67\dfsr.db
      46 (0x0000002e)
      0x10fbb
      0 x 11004
      -567
      0 x 11017
   
  

  Log name: Application
  Source: ESENT
  Date: 16/04/2016 13:51:57
  Event ID: 454
  Task category: registration/recovery
  Level: error
  Keywords: Classic
  User: n/a
  Computer: server.domain
  Description:
  \\.\C:\System Volume Information\DFSR\database_6A02_9B3F_29B_F67\dfsr.db SRBHT (1388): database recovery/restore failed with the error unexpected-567.
  The event XML:
  
   
     
      454
      2
      3
      0 x 80000000000000
     
      7034
      Application
      Server
     
   
   
      SRBHT
      1388
      \\.\C:\System volume Information\DFSR\database_6A02_9B3F_29B_F67\dfsr.db:
      -567
   
  

  I think that these are related to my original question, but any advice would be appreciated.

  Thank you

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• Windows Server 2012R2 - network location awareness continues to change the public domain after rebooting

  I also have this problem but I have domain controllers that are NOT part of this Hyper-V host.  If I restart the network location awareness (which also restarts the network list Service) it goes back to the field as it should.  Now when I reboot this server it will be once more put the interface / network to the public even if this Hyper-V server has been successfully joined to the domain with a static IP address.

  Now for clarification.  This Hyper-V server is NOT yet configured virtual.  The only thing that has been set up is a NIC team with two cards on Board (LAN 3 & 4 ports) and two additional network cards four port card (ports 3 & 4).  Local network connection is dedicated to LAN Port No. 1.  We also have a dedicated of the IMM port for access to the Strip.

  The ONLY time I can get this server to restart and STAY in the 'Domain' location is now if I have the PORTFAST enabled on the switch port to which it is connected.  Yes, we use STP here in our company.  This is not the first time that I had to do this, but it seems not just as a colleague claims that he didn't need to do and its technology Hyper-V server restarts fine.  I him have had check it out and he sees no difference between its servers and mine.  Still mine restarts always in the "public" unless I have active portfast.  Any thoughts?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Task Manager - I clicked on cascade tab windows yesterday.

  In the center of support and help that he is told to do a right click on a place empty in the taskbar and choose uncascade. It only gives me the possibility of uncascading. It gives me the possibility in cascade.  I don't know what program or the window that I had opened and selected when I mounted cascade yesterday. If you know how to find this possibility, then maybe it would give me the possibility of uncascade if I launched the same window and selected. Problem is that if its cascading show no open windows on the Task Manager. I want to just uncascade because I use a lot the Task Manager to manage or stop or update programs and I can't do if I don't see the program open the Task Manager window.

  Hi Marne,

  First of all, make sure that you logged in with an administrator account. Then change your password to a password strong. Follow the instructions on creating a password on the link below.
  http://www.Microsoft.com/security/online-privacy/passwords-create.aspx

  Watch user accounts and remove all user that you use no or unknown accounts.

  Download the Microsoft Scanner from the link below: the page also contains security measures good you can review.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  It is better to have a single Antivirus running real-time protection. You can use other analytical tools, but not the multiples at the same time.

  If you use wireless for your home computer, I reset it and change the default SSID immediately when the security on your network wireless configuration. Most of the ships with a SSID default and you should modify to prevent hackers to access your network.

  Make sure you have a firewall is enabled on your router and your computer.

  If you are still having difficulties to access the folders or files, take possession of the file.

  Article number: 308421 - how to appropriate a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421
   
  I hope this helps.

  Marilyn

   

• How can I reinstall Windows 7 task Manager?

  I recently had the opportunity to use the Task Manager feature, but at his inauguration, he only opened the process window, and no other tabs are available. In order to fill what I need to use the process window close even the Task Manager. No other tabs are available, even after several reboots.

  Applications, Services, Performance, networking, users. None of these tabs are available, neither is it a line of the File Manager menu. I guess I have to re - install the feature. How can I do this?
  Thank you
  Doug N

  Hello

  Did you change your computer?

  Method 1:

  I suggest you run the System File Checker and verify.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  I also suggest to check the link and check (which also applies to windows 7).

  The problems of the Task Manager

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Task-Manager-problems

  Using the Task Manager: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/using-Task-Manager-frequently-asked-questions

  Method 3:

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.