Windows Server configured as the gateway crashes with referee interface

Similar Questions

• Windows Server 2003 on the HARD IDE in Mode ATAPI drive?

  Hello!
  My problem is that I want to know if a HDD IDE will run in Mode ATAPI.

  More details >

  There is a motherboard of INTEL S5000 VSA server in the office. He already had Win 2003 and everything was fine until the HARD drive crashed and the people replaced by an a SCSI maintenance (I don't know if he had a SATA, SCSI or an IDE HDD previously). After installing new HARD drive, they were not able to install Win server 2003 and went for 2008. Windows Server 2008 creates problems for us and the maintenance people are also confused and unresponsive to the situation.

  We have Windows Server 2003 R2. The motherboard has only one IDE port but scored the "working mode" as ATAPI. I was wondering if I could just attach an IDE HDD and install Win Server 2003 R2 (since win 2003 supports SATA out-of-the-box)

  (Displayed in the section of WIN XP as Win 2003 sharing the same base with XP, XP users can comment too)

  http://www.Intel.com/CD/channel/reseller/APAC/Eng/products/server/boards/DP/S5000VSA/feature/index.htm#specifications

  If a geek myself, I'm not very educated when it comes to servers. a Google search also did not help. I would be grateful if someone can help out me.

  Thank you
  Chirag.

  Yes it will install and work fine on an IDE hard drive, ATAPI devices are all IDE drives.  The downside is that the reader will be much slower than the SCSI on a busy server, which can be a big disadvantage.

  For all its value that they probably could not install Server 2003 on the SCSI disk because they weren't using the method of F6 to provide drivers SCSI on a diskette or that they could not understand or how their wake worth installation CD.  There is no need of such a monumental lapse, notwithstanding the limitation INT-13 NT4 Server installed on SCSI and Server 2003 installs on SCSI providing that you give appropriate when installing drivers.

  John

• What support VMware Windows 7 as a guest host and Windows Server 2003 as the operating system operating system?

  People,

  Hello.

  Because my laptop is preinstalled Windows 7 and cannot dual boot multiple operating systems. I need to install VMware in Windows 7 host and then install Windows Server 2003 as a guest operating system.

  I installed VMware Server 2.0.2 in Windows 7 and Windows Server 2003 operating system as a guest host. Everything works fine for a while. But VMware Server Home Page https://mylaptop:8333 / IU cannot display more.

  I found that Windows 7 is not a host for VMware Server 2 and strange operating system might happen at any time. I found that 'VMware Player 3' is fully supported in Windows 7 as host operating system but is not taken in charge of Windows Server 2003 as a guest operating system.

  People knows what product VMware Windows 7 support as host operating system and Windows Server 2003 as the operating system prompted?

  Thanks in advance

  Hello

  IMHO, I think that Workstation is the vmware product just for you, the requirements

  It supports Windows 7 as a facilitator and Windows 2003 as a host with no problems. You can be confident about it at 100%.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. MUCHAS gracias!

  Virtually noob blog

• any ideas? Installation failure: Windows failed to install the following update with error 0 x 80070663: update of security for Microsoft Office System 2007 (KB972581). That's what I get away

  Installation failure: Windows failed to install the following update with error 0 x 80070663: update of security for Microsoft Office System 2007 (KB972581).

  
  

  any ideas?

  Suggestion: Try to do a repair of Office 2007 installation, then try the updates (after a reboot).

  How to install and repair 2007 Office features
  http://support.Microsoft.com/kb/924611 TaurArian [MVP] 2005-2010 - Update Services

• MediaPlayer 12 on Windows 7 laptop playing my DVD with the sound; MediaPlayer 11 Windows XP desktop reads the DVD even with no sound: WHY?

  MediaPlayer 12 on Windows 7 laptop playing my DVD with the sound; MediaPlayer 11 Windows XP desktop reads the DVD even with no sound: WHY?

  Hello DebbieMarronYM,

  I suggest watching this thread where the poster had the same problem:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/have-image-but-no-sound-when-playing-DVDs-with/211a9bfa-5d94-4CE1-AE95-84307ffdf20a
  Mind post x which is currently marked as an answer a lot of different solutions that can be useful.

• FX6831-03 will not be able to start Windows. Just shows the gateway splash screen, then freezes

  My Gateway FX6831-03 will not be able to start Windows.  Just shows the gateway splash screen, then freezes.  OS is updated to current MS Win7-64 bit-w/all and virus/malware protection., Went over 4 days vacation, and when I tried to turn it on, it should display the gateway splash screen, then stop. can't hear anything that happens on the inside.

  Problem solved!  An external hard drive, powered by a separate power supply, was not turned on, but it was plugged into a USB port. When the computer "seen" this cross-town 'dead', he just stop - but no message appears problem.

  The good part?  Vaced out all the dust and replace the bios battery.  [I'm good for at least another 2 years;-]

• Installation failure: Windows failed to install the following update with error 0xC1900104: English ESD Bundle Parent.

  8.1 for Windows cannot be installed on my Sony Vaio Duo 13! An error pops up asking me to contact the OEM manufacturer for BIOS update. Checked in the event log and saw this error: Installation failure: Windows failed to install the following update with error 0xC1900104: English ESD Bundle Parent.

  Any idea? I'm redownloading the update now.

  More details

  Log name: Application
  Source: Windows Error Reporting
  Date: 17/10/2013-20:26:04
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: SAM-DUO13
  Description:
  Bucket of error, type 0
  Name of the event: WindowsUpdateFailure2
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1: 7.8.9200.16715
  P2: 8020002e
  P3: 0E51874C-8E6E-47B6-A835-CCAEEF3D9997
  P4: download
  P5: 101
  P6: unmanaged
  P7: 0
  P8:
  P9:
  P10:

  Attached files:

  These files are available here:

  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 49ede667-3727-11e3-bea8-fd232fd2f50b
  State: 262160
  Bucket Hashed:
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1001
      4
      0
      0 x 80000000000000
     
      12180
      Application
      SAM-DUO13
     
   
   
     
     
      0
      WindowsUpdateFailure2
      Not available
      0
      7.8.9200.16715
      8020002e
      0E51874C-8E6E-47B6-A835-CCAEEF3D9997
      Download
      101
      Unmanaged
      0
     
     
     
     
     
     
     
     
     
     
     
     
      0
      49ede667-3727-11E3-bea8-fd232fd2f50b
      262160
     
     
   
  

  I found the post on the Sony support site. Give it a try.

  http://community.Sony.com/T5/VAIO-hardware-networking/availability-for-Windows-8-1-upgrade-for-VAIO-PC-s/m-p/204481#M13112

• LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  Check your hosts file.  to help with this and more:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• Failed to upgrade 10 Windows v3-772 - initialize not just crashes with the acer logo screen

  Hi guys

  I just had my computer repair and the SSD has been changed. I was running 10 before windows and everything was perfect until an update in ruins everything. Long history does not in this

  In any case I unstall all my software and do an update to windows 10. All the preparations and thus seems to be okay. Then it restarts and is stuck. Never of shots. I see the low activity of the HARD drive, but I let it run for 8 hours and still nothing, always gangs in the acer start window. It's once the bios loaded, because I can access that I'm fast and press f2.

  After a while, I gave up and thought maybe it was just a fluke, so I used my recovery dvd and reinstalled my system and the Agency and the outlook and... After the installation of about 5 hours, my system was ready to go. So I decided lets try again. And once again same failure. Just crashes with the Logo of Acer.

  I called Microsoft and they told to do me a startup repair. However it is not possible, I can get it in the repair mode, but none of the functions to work. Then they said that it was a material thing, but everywhere I look States the v3-772 should have no problem with the windows 10.

  I'm normally pretty good to fix my own problems, but in order to fix a problem I need a mistake or error code or something to go for. Does anyone have an idea what to do?

  ncmohr,

  I'm not completely sure what is the problem, but I'll tell you this.  When I look at Windows 10 drivers of Acer and BIOS for your computer model and see that there are some drivers Windows 8 and an old BIOS, it's really bad... especially if you try to get Windows 10 anniversary of working on your computer.

  I don't have the model of your computer, but I'll give you a bunch of links that may or may not help you get a version of Windows 10 installed on your computer.

  http://community.Acer.com/T5/V-and-VN-series-laptops/Acer-Aspire-v3-772-Windows-8-1-clean-install/TD...

  http://community.Acer.com/T5/Windows-10/Acer-Aspire-ES1-111M-cannot-install-Windows-10/m-p/460183#M4...

  https://www.heidoc.NET/Joomla/technology-science/Microsoft/67-Microsoft-Windows-and-Office-ISO-downl...

  https://Rufus.AKEO.IE/

  http://www.Acer.com/AC/en/us/content/Windows10-update

  http://www.Acer.com/AC/en/us/content/drivers

  ---------------------------------------------------------------------------------------------------------------------------------

  If you try to do a upgrade "on-site" Windows 8 for Windows 10 anniversary, then the link below and picture below might help... but I doubt it.

  https://www.Microsoft.com/en-us/software-download/Windows10

  

  Edit: I don't know if you should be using the drivers on the Acer website to download or just use the updated drivers that Windows automatically gives you.  Or a combination of both.  Try to start with the drivers Microsoft gives you automatically.  It could take hours for you to understand... Unfortunately.

  Edit2: On the Acer Web site, they gave you windows driver chipset 8.1 and Intel Management Engine Interface driver. And I suspect that the reason that they did is because they don't have to update your BIOS.

• Acrobat pro dc is not compatible with windows server 2003, I the downgrade?

  I buy Adobe Acrobat Pro DC and need to use it on a Windows Server 2003 computer. I can the downgrade yet?

  No version of Acrobat is for the server... (except Terminal Server). It's technique and license number.

  You can not downgrade retail licenses. Possibly of multi-user licenses.

• Vista will not register, the computer crashes with log off

  Computer crashes with log off of Vista.

  Hello

  Check your antivirus program to see if it is set to check the floppy drives, CD/DVD, or other removable media drives
  on closed session, restart, or stop. Those who do this will be often blocks that you met.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Quosmio G20-106: issue of Windows Server 2003 and the Fn keys +.

  I installed Windows Server 2003 on my Quosmio G20-106.

  After I installed all possible drivers and saving Toshiba download area, I have still 3 features in the "Other devices" section: eHome Infrared Tranciever, network card and the PCI device.

  In addition, Fn + keys do not work, I can not change the brightness.

  Any ideas?

  Hello

  Well, as far as I know the Qosmio G20 was delivered with Windows XP MCE.
  I found the drivers on the Toshiba site, and it seems they are designed only for Win XP and Win XP MCE. In this case, it is possible to s as the FN keys and other devices don't work.
  Nevertheless, it seems to install the LAN driver and modem driver.

  I found on the Web from Toshiba site a FAQ How to identify an unknown device
  Please visit this site:

  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

  Good bye

• Windows Server 2012 Foundation and SMB problems with older equipment

  Hello

  My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.

  This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636

  But of course, the solution does work with my version of the server.

  Does anyone know if there is a similar fix available?  I got my hunting.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Windows Server 2012 Remote Desktop "flicker/crash.

  I am running Windows Server R2 Standard 2012 on a server.

  When multiple users use RDP (Remote Desktop Connection) to connect to the server says, those who log after the first connected user (i.e. the user 2, 3, 4... etc) experience a "flicker" of the desktop and applications open close for said flicker when they try to open any application.

  So to explain step by step, once connected to the server using the RDP Protocol, the Server Manager application opens (the only application affected by flicker). Suppose I want to open the Task Manager, so I go to the taskbar, do a task manager, right click. Then the box office disappears for a time, including the taskbar and the background, while the application server manager remains open.

  This happens for all applications other than the Server Manager.

  In addition to this, the first connected user is also affected do not experience the flicker and can run programs as usual.

  As far as I can tell that this has happened since the beginning of the installation of windows.

  My first guess would be that the explorer.exe is crashing, but I can't really verify the said Task Manager.

  I don't have physical access to the server, only a remote connection.

  Everyone knows something like that?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows Server 2003 R2 explorer.exe crashing

  Hello

  I am looking for help on a PC server.

  All programs work correctly and for all intensive purposes, the server is very good.

  The problem is that explorer.exe crashes every 3 to 8 seconds.

  I had a quick glance at the file hmdp and tbh it means nothing to me.

  Could someone kind take a look on it and maybe point me in the right direction?

  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  [C:\Documents and Settings\electrical\Desktop\error files\explorer.exe.mdmp] Dump file loading
  User Mini dump file: only registers, stack them and portions of memory are available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  Windows Server 2003 Version 3790 (Service Pack2) MP (4 procs) free x 86 compatible
  Product: Server, suite: TerminalServer SingleUserTS
  Computer name:
  The debugging session: 04:48:47.000 Wed May 29, 2013 (UTC - 07:00)
  System Uptime: not available
  Running time: 0 days 0:00:05.000
  ..............................................................
  Loading unloaded module list
  ..........
  This dump file is an exception of interest stored in it.
  The stored exception information are accessible via .ecxr.
  (b10.700): access violation - code c0000005 (first/second chance not available)
  EAX = ebx 00000200 = 80070000 ecx = 003 has 0038 edx = 00000000 esi = 00000464 edi = 00000000
  EIP = 7c8285ec esp = 00f1a410 ebp = 00f1a480 iopl = 0 nv in EI ng nz cy ac pe
  CS = 001 b ss = 0023 ds = 0023're = 0023 fs = 003 b gs = 0000 efl = 00000297
  Failed to load image C:\WINDOWS\system32\ntdll.dll, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntdll.dll
  ERROR: Module load completed but symbols can be loaded for ntdll.dll
  ntdll + 0x285ec:
  C3 7c8285ec ret

  Any help would be appreciated more

  Colin

  Support for Windows Server is available here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  The forum, you are now aims to help users of the computer at home.