Windows Service host process has stopped working... online and are looking for a solution
I have a Lenove with Windows 7 Home Premium 64-bit of the system. Yesterday I got stuck in a loop while looking for a dog boarding on Google. I had to do a system shutdown to break out of the loop. Since then, I get the message: «Host process for Windows services has stopped working...» "Also, I heard the music or script play twice since then and did a reboot to get rid of the problem. I don't know that it will continue if I do not resolve what has caused the problem initially. Also, I went into the control panel one checked all the sound icons and they are all OK.
I'd appreciate if someone could give me some instructions on how to solve these problems. Thank you!!
Tags: Windows
Similar Questions
-
Windows Shell common Dll does not respond and the Windows Rundll32 host process has stopped working
I got two errors above and try to solve them without my success. My computer is slow, and several programs say "not responding" for a while until what they caught finally upward. It seems that I have a driver problem. Any advice?
Hello riondet,.
Thank you for using the Microsoft Windows Vista Forums.
How long did you receive these error messages? Did you change your operating system before thses errors? All new software/hardware installed or new Windows updates?
It seems that a dll is missing. You can fix it easily if you have a vista bootable disk. Just boot from the disk and click on repair your computer and then click on start option repair and it will do the rest.
or, if the problem is not resolved, then insert the vista dvd and then open the command prompt as administrator, and then run the following command...
C:\sfc scannow
and then press ENTER.
Please let us know status. Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
My intelli mouse stopped working and what I get is "(32 Rudll) windows host process has stopped working" what's happened?
Hi Stevan I am,
1. for how long have you been faced with this problem?
2. did you of recent changes on the computer?
3 do you mean the computer crashes when you get the error?Method 1:
You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to perform a Scan SFC -
a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
e. once the scan is finished, close the command prompt window, restart the computer and check.Check the link below for further guidance on scan SFC - mentioned
http://support.Microsoft.com/kb/929833Method 2:
You can perform a clean boot and check if you are facing the same question to the clean boot. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -
http://support.Microsoft.com/kb/929135
If the problem is resolved check which service is causing the problem; referring to article and following the other steps.
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:a. Click Start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.b. on the general tab, click the Normal startup option and then click OK.
c. When you are prompted to restart the computer, click on restart.
I hope this helps.
-
I always get a so-called mistake 'host process has stopped working ".
I received a message 'host process has stopped working "," image of task has been damaged or has been tampered with', and anothermessage that said something about another process has stopped working (it starts with ss; something), I received these messages for about 2 weeks, at least. Two messages later I get when I try to join another computer to my network. Also when I try to change discovery option is discovered the first message I get all the time. How can I fix it? Or what is caiusing this?
Hello
1. don't you make changes to your computer before the problem?
2 could you post back with the exact error messages?I suggest that you follow these steps and check if the problem persists.
Step 1:
An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer
http://support.Microsoft.com/kb/940520
Step 2:
Put your computer in a clean boot state, and check if the problem is related to a software conflict of third parties.
http://support.Microsoft.com/kb/929135
Note: Restart your computer as usual by following step 7.
Step 3:
Also done SFC scan and check if the problem is related to missing or corrupt system files.
-
host process has stopped working for windows services
my host process for windows services has stopped working please could you find me a solution please
Hi joottley,
· Exactly when you receive the error message?
· Did you the latest changes on the computer?
I suggest you try the methods below and check if it helps.
Method 1: Put the computer in a clean boot State, and if the problem persists.
Note: After the clean boot troubleshooting, follow step 7 in the link provided to return the computer to a Normal startupmode.
Method 2: If the problem persists in safe mode, then check the observer after return with details and events for the cause.
What are the information in event logs? (Event Viewer)
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
See the Microsoft article below and install them updated if the problem occurred after you download updates from Windows Updates.
An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer
-
After the upgrade to windows 10, my dreamweaver has stopped working. It starst and lasts 30 seconds and never work again.
Could someone give me a solution for this? I really need DW!
Problems during the installation or opening Dreamweaver on Windows 10
-
Host process has stopped working
I'm opening a small window saying that "Windows host process rundll32 has stopped working". When I hear this my mouse and keyboard stop working. Why I get this message and how do I stop it? I did the obvious things like changing the batteries and that did not work, but I don't know what else to do.
HelloWhat is rundll32.exe and why it works?
http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/What is the suspicious Rundll32.exe process?
http://WindowsXP.MVPs.org/Rundll32.htm-----------------------------------------------------
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------
If no joy trying to determine what is the cause:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything - then right
Click on taskbar - task manager - take a look at stored by - Services - process -.
It's a quick reference (if you have a small box left - show for all users, then
Check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see who are loading is method 2 - using MSCONFIG then after a
a list of these here.
--------------------------------------------------------------------Tools that should help you:
Objects of process Explorer - free - find out what files, registry keys and other processes
have open, which DLLs they have loaded and more. This exceptionally effective utility will be
even show you who owns each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured so that it starts automatically when your
system boots and you log in. Autoruns is also the full list of registry and files
locations where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity
in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded
automatically when Windows starts. For each request, the following information
appears: product Type of startup (registry/Startup folder), Command - Line String,
Name, file Version, company name, location in the registry or the file system and more.
It allows you to easily disable or remove unwanted programs that run in your Windows
startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not.
The window Watcher says it all, every window created by all programs that are running, the statement
If the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Windows vista has been giving messages: window has recovered from unexpected shutdown down and showing process (rundddl32) also host windows stopped working. Internet Explore has been blocked or does not. Please tell us the solution-thanks
Hello
Thank you for your response.
I suggest you follow the steps from the link; It will help you solve the problem.
Method 1: An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer: http://support.microsoft.com/kb/940520
Method 2: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.
http://support.Microsoft.com/kb/929833
Method 3: If this is a recent problem, then you can try a system restore and check if it helps.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To run the system restore, you can see the following link.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Please perform these steps provided recommended and post back if you still have the problem.
Hope this information is useful.
-
Host process has Sopped working and Windows will close the program...
I get errors on the host process has stopped working and will end the program... when I open Windows Media Center on my laptop Acer 6930 G. Also I get error messages whenever I lose a web page, IE Internet Explorer closes and the problem lies...
Hello
Try it it will help u.
http://www.online-tech-tips.com/computer-tips/host-process-for-Windows-services-stopped-working/
-
Catalyst Control Centre: host application has stopped working
What does the error message ' Catalyst Control Centre: host application has stopped working "means and how to fix it?
Maybe it's the solution you're looking for.
Recently, I removed the malware recovery Vista of another of our mobile phones of the company Center. It installed ATI graphics card. This malware cache most of the files on the PC to try to trick into thinking that your PC is really damaged as he reports. Remove malware does not cancel the hidden aspects. In Vista, the folder of' your profile name (usually the owner) " c:\Users\ contains the subdirectory AppData required by the Catalyst Control Center to access in order to operate. If this directory is hidden, CCC cannot locate the files needed to launch. To resolve this problem, I use the following steps.
Go to c:\ and right-click on the users. Select Properties. On the general tab, look down to the hidden selection. If not, there is a box to tick in the box, place a check mark. Hit apply, select Yes to apply to all subdirectories. If you click ok, you may notice that he disappeared in the pane on the right, once it ends. It should always appear in the tree view on the left. Right click on it again. This time, remove the check mark and apply to all subdirectories. Once it's over, your files in the Users directory should reappear and Catalyst Control Center should function normally again. It worked in all cases that I have hitherto encounterd. I hope this works for you as well...
-
Catalyst Control Centre: host application has stopped working Windows xp prefessional
Catalyst Control Centre: host application has stopped working Windows xp prefessional. ididnt get what do that means.
Catalyst Control Center is a Radeon video card component. I recommend that you go into Add/Remove programs and uninstall. Once you have uninstalled it click HERE to download and enable the parser should automatically detect and install the appropriate driver. If the installation of the latest version does not resolve the problem, you should scan your computer for malware using Malwarebytes. Make sure that you update the parser prior to analysis.
-
How can I fix windows 7 Catalyst control center host application has stopped working
I received the error: Catalyst Control Centre: host application has stopped working. I uninstalled the Device Manager Catalyst Control Center and restarted - after uninstall and reboot I got the same message saying: Catalyst Control Center: the host application has stopped working - I also checked for driver updates in the Device Manager and the device manager says my driver updates are up-to-date.
I just received a response from AMD for a known issue with Catalyst Control Center and Windows 7. You can go there. It worked for me the first time after a lot of troubleshooting.
How to solve the CCC is not loading/opening at initialization.
Scenario: the user tries to open/load the CCC through different methods, but it does not load. The problem may occur without any changes to the system or a Catalyst driver update or reinstall. This is issue mainly affects Windows 7 machines.
Cause: possible corruption of the Windows Global Assembly Cache (GAC). Usually, this requires the user to format and reinstall Windows.
Resolution: this solution has been tested - reproduced and resolved.
Remove all the ATI through programs and features in Control Panel using the Manager to install Catalyst (GPC). Restart the system in safe mode and follow these steps:
-Remove all ATI C:\programs files files and the C:\programs files (x 86)
-Go to the C:\Windows\assembly and sort by "public key token. Locate the following key token public "90ba9c70f846762e" which is
-associated with ATI. Usually only 2 entries. Remove 2 entries. Note: entries should be deleted (right click and select uninstall) since regular safe mode
-mode may cause a permissions error. 2 entries appear only in the systems concerned by this issue. This means that you want the 2 inputs on systems where the CCC charges, the entries do not exist.
-Close and restart normally.
-Reinstall the ATI Catalyst package.
I hope that you will get in working order!
-
Why my Catalyst Center: the host application has stopped working?
When I log on my computer, a window opens in two separate occasions stating that Catalyst Center: the host application has stopped working... How can this be repaired?
Hi Missy,
This probably isn't a problem MSE or malware. It could be a problem with the video software (which is otherwise commonly) and I have it on my system as well for my ATI graphics card.
This just started recently - as the last day or more? If so, try a system restore to before it started to see if that helps. If you use Windows 7, seehttp://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, seehttp://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, seehttp://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.
Good luck!
Kosh
-
Satellite L500D-144 - CCC of the host Application has stopped working
Ladies and gentlemen,
My PSLT6E - 007004GR is almost a year.
This month, there was an update - possibly to leave Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
Catalyst Control Center. The host Application has stopped working, it is looking for a solution.A new installation of the driver graphics card and Catalyst Control Center has not changed. Instead, a standard Microsoft graphics card driver is installed.
Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
Is it reproducible.Have already reported more customers or I'm the first?
What can you do to the problem?
Sincerely,
CBluebaerchen
Hello
> Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
To do this the display of Windows Update driver update?If so, restore the system to an earlier point and disable this update of the display driver and choose only the updates of Windows. That s enough.
Otherwise, you can try running CCleaner. It can clean and fix registry problems.
-
Want to m6: Catalyst Control Centre: host application has stopped working
Whenever I start my computer, I get the following message every time that a few months:
"Catalyst Control Centre: host application has stopped working".
A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
Please how can I get rid of this or get whatever the problem is solved?
Thank you.
Hello
Try to use Recovery Manager to reinstall your original graphic AMD software package - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.
After reinstalling, restart the laptop.
Kind regards
DP - K
Maybe you are looking for
-
Re: Satellite A105 stops after 60 seconds (NOT a heat problem)
Satellite A105-s4344 stops after EXACTLY 60 seconds. The mobo was removed from bevels and all devices removed unnecessary (DVD, HDD, WiFI etc.). Swapped CPU and RAM with those well known. AC adapter / CC exchanged and battery by the well known. Does
-
Windows Installer error - hardwaree to the computer may not support booting to this disk.
I need to reinstall Windows 7 in preparation for upgrade to Windows 10 I use the Bootcamp Assistant to install Windows 7 and have the following problem. 1. I partition my SSD 512 drivce, creation of a score of 91 GB for Windows. The partition is crea
-
Error on the function create folder
Hello I am trying to create a file path with folders named to some information related to my program such as serial number and order number. ex: c:\calib\LX2345\123456. my code works and the program generates the path that I want to, but if the path
-
PC show 722C as offline Deskjet, the printer is on but printer does not print.
Yes, a 722C is really old, but it has worked perfectly since may, 1998? For the past 6 years, it was connected to a 32 bit Dell inspiron 531 s running Vista. It connects via a spindle cable on the end of the printer and one USB plug on the other. (
-
Please help me get on the internet if possible would really appreciate it
my computer won't let me get on the internet I diagnose and fix, but it says adapter realtek RTL8101 family pci-e fast ethernet nic (NDIS 6.0) knows driver or hardware related issues Please help me understand this! hp omni 100 desktop just installed