WINDOWS SERVICES ERROR 711

Similar Questions

• HP Laserjet M277dw MFP: HP Laserjet Pro M277dw - low memory/job cancelled MFP & 49 WINDOWS service error

  Ok.  I've seen other messages with this error.  But I think mine is a little different.

  The problem: Prnter will not print anything at all, even a test page.  It will not copy anything either.  Low memory - cancelled job message comes up / have worked perfectly for 2 days, and then it started.

  Printer is connected via the network (wired), but I have tried wireless also.

  Software is installed on a machine windows 10.

  In addition to the windows machine, print requests are sent to her through the network via an iPad and an iPhone.  HPeprint is also used.

  Troubleshooting: I did the following in trying recify problem:

  Printer disconnected everything on during 30 seconds.

  Reset the default printer

  Redid the installation of the network via the touch screen

  Deleted printer in windows and deleted driver packages.  Reinstalled using the supplied software.  Also tried to install using "add a printer" in windows.

  Possible corrections that do not go to work or to me:

  Put in place as a printer IP - he loses the feature and choose but in addition to the drivers manually to scan etc...

  Connect via USB to the computer - if I do this do not lose the ability for the iPad and iPhone to print on the printer - or at least makes this dependant on the computer is turned on and sharing put in place

  I will say that after I tried to implement the prnter using "add a printer" in windows, I couldn't get the printer to print the test page - nothing happened, but did not get the memory error message.  I removed from the print queue and even deleted all the files in the subdirectory of coils in system32...  ButI cannot get rid of the printer now under "devices and printers" in the Panel...

  Help, please!  Pulling left what my hair on...

  Thank you

  THIS PROBLEM HAS BEEN RESOLVED.

  After several weeks of rtying many different things to fix problems

  (1) after installing the new modem Arris double band by carrier Internet, printer would no longer.  First issue was an error of memory.  After reset printer would no longer at all

  (2) I tried installing and uninstalling printer wireless in several ways, ethernet and USB.  Printer would never even print a test page.  Attempts to print the pages of any other report or configuration would result in the 49 service error

  (3) BrightHouse (carrier) was 3 separate times to tweak the modem, try to uninstall and reinstall the printer, etc.

  The problem turns out to be that with some modems, HP can not communicate over IPv6 with modem you (they don't play well together using IPv6) either because of the HP or the modem, HP likely due to the fact that he always seems to be HP printers with this problem.

  Here are the steps I took finally solved this.  Please note that the solution came from a technician BrightHouse to a different Web site.  I'm just passing along the info in case it helps others:

  (1) completely uninstall the printer from the PC, including the printer, he installed all the software, drivers and all the ports that you may have created trying to recify problems

  (2) to shut down the computer

  (3) disconnect the ethernet cable from the printer (as applicable)

  4) click on the reset button on the home screen to reset to the default values for the printer

  (5) do a cold reset the printer (people of email support the HP for the procedure)

  (6) on the interface of the printer (screen), go into the settings; network settings, network services.  Here you will see IPv4 and IPv6.  Disable IPv6.  Don't mess wth IPv4 (leave it on).

  (7) plug the ethernet cable into the printer or activate/configuration of wireless settings using the printer (screen) interface.

  8) turn on the computer

  (9) install the printer using the CD that came with it or installation software downloaded from the HP website.

  I'm not sure that each of these steps is absolutely necessary, as step 4, but that's what I did...

  I saw so many messages on the internet with HP printers not install correctly and launch a 49 service error instead.  Not sure how those problems, This applies.  But HP needs to fix this issue with their printers IPv6 or at least try to find the cause...

• host process for windows services error

  Can I get the service of email and internet for a little while, then the message above appears and I can no longer search the Web or get mail unless I restart my computer.  I also can't update my antivirus or get Microsoft updates.

  Can I get the service of email and internet for a little while, then the message above appears and I can no longer search the Web or get mail unless I restart my computer.  I also can't update my antivirus or get Microsoft updates.

  I found this in my "library", and I wonder if it applies to you.
  It is clear that I don't know if the method actually works. Just send you if you are interested.
  .....................................................................................................................................................

  HOST PROCESS FOR WINDOWS SERVICES STOPPED WORKING AND WAS CLOSED

  I had this problem, as well as the browser Chome Goggle does not and one Windows Update error 80072EFE code.  After months of research, I found that mosty likely, the computer has been infected by ROOTKITS. Try TDSSKILLER to find rootkits. Download and run from here
              http://support.Kaspersky.com/viruses/solutions?QID=208280684
  ........................................................................................................................................................

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows service error: "error 1053: the service did not respond at the beginning or".

  Hello

  I had created a Windows service to start and stop a Tomcat server. Whenever the Tomcat server works with Multi threaded items and if I try to stop the Tomcat using the Windows service I get the following error, "error 1053: the service did not respond at the beginning or".
  application for review in due course. "

  I can't change the value of 'WaitToKillServiceTimeout' as my services are running on the client computer. Y at - it any other way I can do windows services to expect my Application Server series of all threads and stops.

  Kind regards

  Amina

  Hello

  I suggest you to ask your question in the Microsoft TechNet Forums: http://social.technet.microsoft.com/Forums/nl/category/windowsserver

  I hope this helps.

• WINDOWS SERVICES ERROR

  I intalled windows 7 ultimate, after that start it does not services such as autoconfiguration wlan service, peer network consolidation etc. and say 'we couldn't start on the local computer"if I manually activate it in services.msc

  Hello Paul,

   

  Thanks for the reply.

  Hope the problem is solved. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

   

  Thank you.

• Windows 7 - VPN Error 711, 609 and error in the article «Phone and Modem»

  Hello

  I have the problem with my VPN from last auto Win update MAJOR - 16/10/2014

  My VPN worked fine until this update. Since then, I have a lot of different errors when I try to connect to this VPN again (from another PC with the same credentials is fine).

  When I now try to connecto to VPN I have Error 711 first and later of 609. I tried a lot of repairs, and none worked.

  VPN settings:
  http://i.imgur.com/cmADOeZ.PNG
  http://i.imgur.com/BaQiFtf.PNG
  http://i.imgur.com/kDL2xz1.PNG

  Services:

  • Plug-and-play - Works Fine - Set as automatic and the Service started successfully
  • Remote procedure call - Works Fine - set as automatic and Service started successfully
  • DCOM Server process Launcher - Works Fine - AutoPlay and the Service started successfully
  • Fax - Fax on the local computer and stop service. Some services stop automatically if they are not in use by other services or programs.
  • Remote access auto connection manager - Windows could not start the remote access auto connection service manager on the local computer. Error 0 x 80000048: 0 x 80000048
  • Remote access connection manager - automatic game and the Service started successfully
  • ICS - Internet connection sharing service on the local computer on the road and stop. Some services stop automatically if they are not in use by other services or programs.
  • Routing and remote access - auto play and the Service started successfully
  • Telephony - Works Fine - set as automatic and Service started successfully

  When I try to open "Phone and Modem" in the control panel:
  http://i.imgur.com/DIPZCRe.PNG
  "Phone and modem control panel can not be opened. You can have a problem starting telephony service.

  I tried:
  (1) Win Recovery - did not work

  (2) cmd sfc/scannow - did not work

  (3) uninstall and reinstall manualy miniports did not work
  Netcfg u MS_L2TP
  Netcfg u MS_PPTP
  Netcfg-l %windir%\inf\netrast.inf c - p-i MS_PPTP
  Netcfg-l %windir%\inf\netrast.inf c - p-i MS_L2TP
  http://i.imgur.com/VYHqQwn.PNG

  (4) Windows Network Diagnostics - Troubleshooting couldn't identify the problem - did not work

  (5) order the firewall and Antivirus protection - failed

  Can anyone please help me and fast? This was done by Win update and it made me a lot of trouble. I really need functional VPN to my client and I can't do it right now.

  THX and best regards,
  Matej Skarka

  -last edited on 20/10

  Hello

  I will recommend you to post this thread in Windows 7 IT Pro TechNet forums networking. This is the best forum for network problems.

  Please follow the link below to post this thread.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Thank you.

• Error 711; Remore access connection manager service will not start

  Error 711; Remore access connection manager service will not start

  Hello

  Thanks for posting your question in the Microsoft Community!

  When exactly do you get the error message?

  This error message appears when a required service is not started on your computer. You won't be able to connect to a network, and you might not be able to install network cards.

  This problem may occur if some or all the following services are not started:

  • Plug-and-Play
  • Remote Access Auto Connection Manager
  • Remote Access Connection Manager
  • Telephony

  You can see test link following the steps and check:

  Get help with "Error 711" message

  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-Error-711-message

  Do not post the State of the question.

  You can always view in Microsoft Community if you need help with Windows.

• Error 711 The Secure Socket Tunneling Protocol Service service on Local computer started and then stopped. ." Unable to connect to the Internet

  Original title: I get error 711 when I try to connect to the internet via a UIM modem on my windows overpriced home 7 SP 1

  Did some research and tried manually from the phone, RACM, RACM auto and plug and play services but got error 1068.Tried to start the service SSTP to solve this problem but got the error "the Service of Protocol Secure Socket Tunneling courier on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. »

  I am so desperate and would appreciate helpful suggestions.

  Hello

  1. When was the last time it worked?

  2 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If the steps is not enough, go to method 2.

  Method 2:

  Ensure that all dependencies of Service Remote Access Connection Manager components are started and set to automatic

  (a) (a) cliquer click on start-run, type services.msc, the, click OK.

  (b) ensure that the following services are started on and set to automatic.

  (c) make sure that the "Startup Type" says "automatic"and has begun.» If it isn't, use the drop down menu to change (under the general tab).

  (d) if she once said: "Automatic", then click on the "Recovery" tab in the upper part and replace the line "First failure" "Restart the Service", then click on ""apply ', then OK. "

  See also:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this helps and keep us posted.

• the Windows spooler service error

  I am trying to reinstall the printer software, but keep getting windows critical error spooler service does not start. How to cure the problem

  Note: "the title of this post was published to help other customers to easily find this topic in their search results."

  Hi Phil,

  Thanks for posting this question in the Microsoft Community Forums.

  From you description of the problem, I see that the Windows print spooler service is stopped.

  Let us work together to start the print spooler service.

  However, before we start, we need more information to better understand this issue. Please answer these questions.

  1. What is the exact error message that you receive?

  2. which version of the Windows operating system is installed on the computer?

  3. What is the brand and model of the printer?

  4. when exactly you receive the error message?

  5. don't you make changes to the computer before this problem?

  Let us try to start the Windows Print Spooler Service:

  To do this, follow these steps:

  a. on the desktop, press the Windows key + R to open the dialog box run.

  b. type services.msc (in the search bar) and press enter.

  c. scroll down the Services window and right-click on print spooler.

  d. Select Properties.

  e. in the general tab, click Start and make sure that the Startup Type is Automatic.

  f. click apply and OK.

  This will start the print spooler service.

  Now, try to reinstall the printer software and check if it works.

  Please get back to us with the results and more information on the issue.

   

  If you have questions about Windows operating systems, write to us, at any time. We are happy to help you.

• Windows service pack 1 for x 64 8007045 D-based systems error

  I am trying to install updates, especially the windows service pack 1 for x 64 systems and I am getting the error 8007045 D. He gets almost throughout then this error appears.

  Anyone have any ideas?

  Ta

  Hello Mummyd,

  Thanks for your post.  If please make your way through the troubleshooting steps below and let us know the results of each utility so that we can better help you get this issue resolved.

  1. download / install and run the tool update system - CheckSur.  You can download the tool from the link below.

  Download the tool update system (64-bit)

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  We can't wait to hear back on your part.

  See you soon

• Windows service pack 1 downloads 99.9% but still comes up with error and does not?

  Windows service pack 1 downloads 99.9% but still comes up with error and does not?

  jktjw,

  Please post with the information requested here: what to post in the Windows Update forum
  Start with the troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1601, install shield is not accessible. Installation of Windows service has stop working.

  Original title: my windows service install abandonment of work may not have it installed at all do I need to reinstall win xp.

  service inst. Win does not install shield not accessible error 1601 cant install data files to dvd games cannot uninstall files I need help

  Hello
  before you try a complete reinstall, try to download from this page:
  http://support.Microsoft.com/kb/315353
  Let me know what happens
  b Eddie

• I received calls from someone in India who said that they are Windows services centre telling me that they have received the error message saying that my computer is corrupted

  Original title: my computer is corrupt and needs fixing!

  I received calls from a person in India who said that they are Windows services centre telling me that they have received the error message saying that my computer is damaged, and they want to help me.  But I have not received any error message on my screen.  When I asked them how they got my number they said it's from the database of Windows. The number they gave me is 02921252715 and when I called the number of the person on the other end told me that they are a company called Windows e-solution, independent company and is not attached to Microsoft Windows.  What should I do?  Are these authentic calls and approved by Microsoft Windows?

  Hello

  Its a SCAM!

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Cannot install updates Apple or HP. Error "Setup Windows service could not be accessed."

  I am running Windows XP and recently were not able to install updates apple or hp and get an error message saying that windows service install could not be accessed.

  error message when you try to install itunes or apple updates and updates from hp.  It is said: the window installation service could not be accessed. This can occur if you are running windows in safe mode or if windows install is not properly installed.  Contact your support team.

  Hi Linda,.

  You can read the following article and see if it helps.

  Error message when you try to add or remove a program on a computer that is running Windows XP: "the Windows Installer service is not to be accessible.