Windows Setup could not configure Windows on hardware of this computer Installation error on the new hard drive

Similar Questions

• not sure: the new hard drive installation

  I have a Desktop allows a hard disk which is a failure.  F9 during boot diagnostics say its bad.  I just got the HP recovery disk and I'm not sure that 'when' to instaqll them.  I put the OS on the new hard drive and then first run the recovery or recovery disk?

  If you have the recovery disk set for this PC, run recovery on the new hard drive.  To install everything back like it was new again.  The installation of the OS process is executing the recovery.  Install the new hard drive, and then run the set of recovery disks.

• HP dv6 7214tx: windows Setup could not configure windows to run on this hardware

  Hello

  I know it has been posted similar problems before, but I still can't get on my instalation.

  I came to this point: during installation PROCESS, almost at the end of this message pop up "'WINDOWS Setup COULD NOT CONFIGURE WINDOWS TO RUN on THIS COMPUTER HARDWARE".

  My PC is: ENVY dv6 7214tx

  3rd gener. Intel Core i7-3630qm

  processor 2.4 GHz

  1 TB HARD DRIVE

  8192 MB DDR3 SDRAM

  Blu - ray optical drive

  Windows 8

  NVIDIA GeForce graphics card

  WLAN & Bluetooth

  I changed boot to the DVD - ROM option, SUPPORT of LEGACY enabled, disabled SECURE BOOT.

  What it might useful to you guys, it's the actual installation takes apx. 5 hours, then he came to the point of pop up window mentioned above.

  Do you have any suggestions please?

  Thank you very much

  .. .also even if this driver has been loaded to the top, another window pops up and says smth like "the driver is not signed, and it might not work.

  However, I let it install... I'll see

• Windows Setup could not configure windows to run on a hardware on this computer

  HP Pavilion Sleekbook 15-b023cl

  I tried to install Windows 7 on my computer for the last day and after several attempts the same error message. It is said: "Windows Setup could not configure windows to run on a hardware on this computer." How would I go about fixing this problem?

  Thank you

  Hello:

  I'm not sure that there is a 'one size fits all' answer to this problem, if you google the error.

  The most common solution is to try to install the SATA driver.

  Here is the link to the SATA drivers you need for your model. Download and extract to a usb flash drive.

  First file listed is for 64-bit operating systems.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=22194&ProdId=2101&lang=eng&OSVersion... =

  Use the Drive Options - Advanced method to install and then select the option load a driver.

  If you check the box, only the compatible SATA driver is selected.

  See if it works.

• Windows Setup could not configure windows to run on this hardware

  I am trying to install Win 7 on a HP Pavilion dv6-7012tx laptop. He brings Win 7 by default. I installed win8 once. Now I can't reinstall win7 on laptop in May. He tried to install Windows 7, but when the computer restarts and tries to complete the installation, I get the following error: "Windows Setup could not configure Windows to run on hardware of Cet_Ordinateur."

  

  My laptop configuration:

  By default the operating system: Win7

  Processor: Intel 2nd generation Core i5

  GPU: NVIDIA GeForce 630 M

  Hard disk: 640 GB (SATA II)

  RAM: 6 GB DDR3

  Hello:

  If you use an ordinary W7 installation DVD and use no recovery disc, the most common cause of this error is the lack of SATA drivers.

  Download and extract these files on a usb flash drive. First file listed is for W7 64 bit.

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=23060&Keyword=Intel+Rapid+Storage+Technology+(Intel+RST) & lang = fra

  Plug the flash drive into your laptop and start your installation of W7 DVD.

  When you get to install it now click on that and click the option advanced player options.

  Then choose load a driver.  You should now see all the sata on your USB drivers.

  You can check a box and it will include the compatible sata driver to install.

  Proceed from there, and I hope that will install W7.

• Windows 7 cannot complete installation, halfway, it stops and gives me the message "windows Setup could not configure windows for the hardware on this computer.

  Windows 7 cannot complete installation, halfway, it stops and gives me the message

  "windows Setup could not configure windows to run on a hardware on this computer.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• HP Pavilion dv6-7028tx Enterta: Windows Setup could not configure windows to run on this hardware

  As I tried to reinstall win 7 on my laptop HP Pavilion dv6-7028tx, the competition, Enterta I received this message by win7 saying that «windows Setup could not configure windows on this computer hardwear»

  

  I did some research on this issue, it seems to be the lack of SATA drivers on my computer.

  Could you please tell me which intel SATA driver should I install to fix the problem?

  If this method does not work, then please can you me how to change the hard drive in AHCI or IDE BIOS setting?

  Thank you very much

  Hello:

  You cannot change the drive controller setting in the BIOS on any HP laptop consumers made in the last 5-6 years.

  See if it works...

  Download the drivers from this link below (first listed file - 64-bit).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx? AGR = Y & ProdId = 2101 & DwnldID = 23060 & keyword = Intel + Rapi...

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and support installation of W7 in the machine, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• Windows 7 OEM license, cloned the new hard drive.

  I'm scratching my head on this one.

  I'm running Windows 7 Pro with an OEM license.

  Beyond December, my original hard drive started failing so I made a clone of Clonezilla and transferred to a new hard drive.  Since then, I have not been able to run Windows update and I regularly get a Windows is not real popup.  I checked the section properties and my computer Windows Activation of Windows is enabled.  I tried the site of verification but that sends me to a web page that does not seem to load correctly and 9/10 times.  When I managed to load and I downloaded the WindowsActivationUpdate tool, it gives me just a Setup 0xC8000247 error.  I tried returning my SLUI 3 product key and everything went through fine.  I checked various websites and people say that it must be good using a new hard drive, others say you can't and others are calling saying Microsoft and speak to someone.

  Can I use my OEM license when transferring to a new hard drive?  Answer, what would be the next step?

  Yes, you can use the same OEM license, because it's the same computer.

  What you need to do is probably performing a new installation. Clone software tends not to provide the best results.

  The old hard drive still works? You might try one last time to create a system image and restore it on the new hard drive:

  How to pass Windows 7 to a bigger hard drive - books...

  This of course would mean reinstall the old hard drive, create a system image and then restore it on the hard drive.

  Another option is to perform a new installation using the OEM key.

  Step 1: Download a copy of Windows 7:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Step 2: Perform a custom installation, see Windows 7 section of the following article how to perform a custom installation:

  How to: perform a customized Windows installation

  Step 3:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• Hard drive has been corrupted and replaced it with the new hard drive but couldn't get the windows genuine back 8

  Original title: recovery of original windows 8

  When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.

  Please help me to get my windows genuine 8 back so I could get additional updates downloaded.

  Hello Vishal,

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.

  See the suggestions posted by Andre Da Costa replied on March 7, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-get-Windows-8-product-key-in-preloaded/ea0e53ae-3506-4ba2-a092-f266ece7072f?auth=1

  In addition to this, see:

  Product key lost or misplaced (certificate of authenticity) for Windows

  If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.

  Hope this information was useful.

• Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

  I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

  Log name: Application

  Source: Application error

  Date: 21/07/2012 10:40:20

  Event ID: 1005

  Task category: (100)

  Level: error

  Keywords: Classic

  Description:

  Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.

  Program: For the Windows service host process

  File: C:\Windows\System32\wuaueng.dll

  Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.

   

  SOLVED!

  Hello

  Follow these methods.

  Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

  To save the c:\windows\system32\wuaueng.dll file, follow these steps:

  a. click Start, type run.

  b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

  c. When you receive the following message appears, click OK:

  DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

   

   Method 2: If this does not help, you can reset Windows update components and check.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Correct installation of the new hard drive for Windows 7

  Have a disk hard fatal crash with Dell OEM Windows 7on, so I bought a new hard drive compatible system and have my old system Win 7/recovery of data on a memory stick. It's been years that last I formatted, partitioned and installed an operating system on a new hard drive and I totally forgot how it's done. Vaguely remember some DOS commands were required to work out of BIOS (?). Can anyone list the individual measures to be taken, assuming that the hard drive is physically installed and turned on? It would be a great help!

  Unless this stick memory has on her installation files as well, you cannot reinstall win7 on the new hard drive

  You will need the DVD / or the ISO of Win7.

  ]

  And no you do not need BACK. Just the dvd or ISO / to boot from. Then you can format / partition in the configuration screen

• HP 6310y can't get the new hard drive to load windows 7

  model 6310y - Windows 7 Home premium 64-bit

  My desktop PC has stopped working.  I took it to the local computer store and they said it was the HD.  I bought the new hard drive and tried to install the retail of Windows 7 home premium 64-bit OS.  I got an error Code 0 x 80070002.

  I called HP support... told me that I needed their brand of recovery disks because the motherboard or BIOS would not allow me to install Windows 7 on new replacement HD disks without having their (HP).  So I ordered their... $17

  I bought another new HD and tried to install Windows 7 OS with HP recovery disks.  This time got the 0xe0ef000e error Code.

  I have to mention every time trying to install OS on new replacement HD... He got about 8 to 12 minute installation before receiving error messages.

  I called HP support... this time said that the retail version of Windows 7 OS must have worked and that I didn't need the HP recovery discs brand new replacement HD installation.   They offered me to pay $199 and send my office to fix inclusive it... all.

  Very confused.  I never had something like this before... I had several hard drives die over the years and have replaced the myself and installed all of the software including myself OS without any problem like this.

  Memory retrieves okay when using the diagnostic f9 key... She showed problems with HD during one of my many attempts of diagnostics

  Not sure if it's a bad mother or the video card integrated... do not know how to find either... since I can not the PC market

  It will start at Blue HP screen & most of the time allow me to enter in the screens f9, f10 or ESC.

  Don't know if its worth paying $200 to fix this or go and buy a new one for about the same price.

  any suggestion or help is appreciated

  Thank you

  I had to send it back to HP.  It is a bad motherboard.  They dropped the price a bit to replace the motherboard.  I don't remember how much they charged me.   I'm guessing around $200 - $300

• Recover the Original of Windows 8 for the new HARD drive

  Hello..

  Drive HARD original of my Dell laptop inspiron 15R 5521 has been crushed. She had previously installed Windows 8.

  And, I had upgraded to windows 10 recently.

  Please guide me to reinstall windows 8 or 10 for the new HARD drive via online, coz' I don't have any support recovery (DVD or USB).

  And further,

  1.) is it possible to reinstall windows for one SSD?

  2.) I get all venus applications (application of VGA, Audio application etc.) from Dell with my laptop with the re-installation of windows... ?

  Thank you

  Tilan

  If your system already has Windows installed and activated 10 follow my instructions here to directly download and reinstall clean Windows 10:

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows-10/Windows-10-clean-reinstallation-via-bootable-USB-from-ISO/

  Looks like you're in this scenario.

  Note Windows 8.1 and Windows 10 editions are specific. If your system came with Windows 8.1/10 unilingual homepage, Windows 8.1/10 will not be activated.

  Unfortunately there is no clear marker for end users to determine the edition so my advise is to try first to try Windows 10 Home, if she does not activate Windows 10 unilingual homepage.

  Get a SSD for optimal performance.

  Dell have updated drivers for Windows 10 pilots (WT64a) system:

  http://downloads.Dell.com/published/pages/Inspiron-15R-5521.html

  See installing the driver recommended order:

  http://dellwindowsreinstallationguide.com/2015/09/27/driver-installation-order-Windows-10/

  If Windows 10 was not enabled you must reinstall Windows 8.1 and then upgrade. Follow my instructions here:

  http://dellwindowsreinstallationguide.com/download-Windows-8-1-retail-and-OEM-ISO/

  http://dellwindowsreinstallationguide.com/upgrading-to-Windows-10/

• How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

  * Original title: windows 7 download

  I have a laptop dell M4400 with windows 7 pro OA. HARD drive crashed and I replaced with a new one. How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

  It has probably comes with Windows 7 Professional 64 bit.

  You can download a copy of Windows 7 Professional using the following instructions (update of Microsoft recovery software supports downloads with the COA key):

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  You can also use Windows 10 too as you have the right to it as a free upgrade:

  • How to download official Windows 10 ISO files
  • How to: perform a clean installation of Windows 10
  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Install Windows 7 upgrade on the new hard drive?

  I have the Windows 7 upgrade version that I installed last September, but a few days ago my hard drive died.  How do we install the version 7 upgrade on the new hard drive without using a previous version of windows on it?

  In order to install the Windows 7 upgrade version, you must have a system of eligible operating Windows installed and activated.  You cannot install a version upgrade of Windows 7 on a drive blank.  The installation procedure you do not insert a Windows disk in the drive for verification, eligible operating system must be installed.

  If you do not have a qualification system of operating Windows installed with an activated genuine license, then you can not use the version upgrade of Windows 7 - you would need a license of Windows 7 "full version".

  In summary:

  1. a Windows operating system to eligible address must be installed.
  2. the Windows operating system to eligible address must have a genuine license (product key) and it must be enabled.
  3. to upgrade, boot on the eligible Windows desktop, insert the Windows 7 upgrade disc in the DVD player.
  4. when the menu appears, select custom (advanced option) to a clean install procedure.

  You should be able to repair the installation, if your installation one fall. I suggest create you a System Image (backup) of your installation of Windows 7 after installation of Windows 7 in order to spare you the trouble if your computer one fall in the future.

  You can work around this two ways, I would suggest that you create a System Image (backup) of your installation of Windows 7 after installation of Windows 7 in order to save you the trouble if your computer loses the system failure or instability. Since you are in possession of a valid license of Windows Vista for this computer, you can use the following method to do a clean install with upgrade support:
  http://www.winsupersite.com/Win7/clean_install_upgrade_media.asp
  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP