Windows Setup does not properly

Similar Questions

• Windows Installer does not properly error Code: 641

  HAVE WINDOWS VISTA HOME PREMIUM WINDOWS SETUP DOES NOT CORRECTLY GIVES 641 ERROR WHEN AUTO UPDATE TRIES TO INSTALL IMPORTANT UPDATES.  DON'T ME LETS NOT UNINSTALL A PROGRAM SAYS CAN'T ACCESS THE WINDOWS INSTALL.

  You have installed system mechanic? This is what it seems possible that a recent analysis could have messed up windows installer, so causing problems similar to what you describe.

  I followed the instructions in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Installer-and-error-codes-641-80070641/24fd9f52-7faa-4f80-8f8e-8c7cd80dd481

  Easy to follow, even for an old man like me.

• upgrade vista to 7, fails when you try to uninstall programs, windows setup does not

  Install Windows 7, but Windows Installer does not work.

  Recently, I received my upgrade to 7. I have a new Toshiba running Vista 32 bit. When I try to do the upgrade, I can't go past the part where certain software is uninstalled. The Windows Installer does not work. I'm now waiting to upgrade that I can't because of this. I tried every fix I found, but nothing works. I even tried to download and reinstall the installer, but I get an error code indicating that it does not apply to my computer. I would appreciate a response. I can't believe the issues that I'm with a laptop two month old.

  Hi sdslaw,

  Thanks for posting. Try the following.

  Click Start
  In the search box type 'cmd '.
  In the start 'cmd.exe' menu right click and select RunAs administrator.
  Now type: msiexec/regserver

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Impossible to uninstall the windows installer does not properly

  I can't uninstall a program because I get the message Windows Installer does not work correctly... contact support

  Have you tried to install the latest version of Windows Installer?

  Otherwise, try to run the following from start-> Run:
    msiexec /unregserver
  Then,
  msiexec/regserver
  
  
  
  

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• Skype app on my new computer laptop with windows 8 does not properly

  I have following questions: 1. The Skype app is not always visible (earlier (in widows 7), he was part of the task bar and I could see if he had any message 2) When I click on open it does not open for long before, it was always on (part of startup) 3. Of course, the interface is not as convenient as the last of them. Can I get the previous version of Skype with app version for windows 8.

  You can simply install the desktop version 'normal' using this msi installer for the currently latest version of Skype 6.3.0.107:

  http://download.Skype.com/MSI/SkypeSetup_6.3.0.107.msi

• Game Explorer Windows 7 does not properly

  My Games Explorer does not work. All of a sudden all of my games that is not supported for Explorer (i.e. Gears of War, Halo 2, etc. are there and seem to work) have disappeared and I can't drag and drop anything at all in there. Is it possible to fix this?

  Hi PhreQuencYViii,

  For now I suggest you to see if it was due to a corrupt user profile. Access the link below to fix a corrupted user profile and see if it works very well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Let us know if it worked, or to get help

  Concerning
  Varun j: MICROSOFT SUPPORT

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 (64-bit) Windows Update does not properly.

  Hello everyone, I hope you all do well.

  So my problem right now is that the Windows Update program does not work as it should be, at all. Originally, she showed all the updates, it has proposed to install, but when I tried to download and install it, it didn't work. It hung for hours with no progress, even when I chose only about 11 updated. My internet shouldn't be the problem. I have great internet (currently at trial to double check) that usually is averaging 14ms ping, download 65 Mbps and 5 Mbps upload, so that shouldn't be the issue.

  I tried to make a solution involving all simply delete the C:\Windows\SoftwareDistribution folder and restart the update service, but that it did not set. I ran the diagnostic tool and it says it fixed a number of things, but not an error specific, shown here:

  .

  I tried a few other things, like renaming the files after stopping wuauserv and bits, cryptsvc claim not Real. Curious on if there is no further action that I can take to try to solve this problem, because it makes me nervous and worried that something might affect me if I don't get some put updates in place. I'm sorry to post a new topic on this when there is a little bit before, but many, if not all of them are 2010 or 2011 at the latest.

  Thank you all for your time and attention!

  Customer of June included in this update rollup, update

  https://support.Microsoft.com/en-us/KB/3161647

  Main download page,

  https://support.Microsoft.com/en-us/KB/3161608

  Win-7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52976

  Win-7 64-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52974

  Don't forget to change your windows update settings to never check the updates, and then restart the computer before installing.

  Try to use this to reset the update system is very good,.

  https://Gallery.technet.Microsoft.com/scriptcenter/reset-Windows-Update-Agent-d824badc

  Download in your downloads folder

  Right-click and select extract all in the downloads folder.

  Right-click on ResetWUEng, then run as admin.

  Follow the rest of the guides messages

  Press any key to continue

  Type 2 for this option in the list and the Enter key

  Press on y for Yes I think twice

  After that that he completed

  Type 15 for this option in the list to start the machine

  Must they will restart in 60 seconds will save your work... Press a key to continue.

  After the restart, go to windows updates and manually check the updates that it should only take a few minutes.

• Windows Update does not properly

  I am running windows 7 on a hp Q8300 quad core desktop computer processor.  Windows Update (do not remember the official name) has worked well up until now.  2 days ago it downloaded updates and and asked to close at the end of a session, as it is often done without any problem.

  Now when you start again it says something like "processing and installation of updates 0% complete, do not turn off your computer.  It was 0%.  Finally, it will start in any case, but updates are not yet installed.

  Thanks in advance for your help.

  Download and save the Fixit on this page - How to reset the Windows Update components?
  Once the download is complete, close all open programs and browsers.
  Now Configure the system to boot .
  NOTE: If a 3rd party firewall was previously used, open Windows Firewall in Control Panel to make sure that the native Windows 7 firewall is now on.
  In the clean boot state, all the firewalls of 3rd party will be disabled. Using the Fixit the system must be connected to the internet.

  Now run MicrosoftFixit50202.msi and choose the default mode. Reboot the system to the same State of clean boot and see if he can find, detect and download updates now. If it is possible, then Cancel the Clean boot steps and restart in normal Windows mode.

  In normal Windows mode, can the system installs updates now?

  If this isn't the case, configure the system to boot once more and run the Fixit by using aggressive mode. Restart when it's done and follow the steps above to see if the system can update now.

  MowGreen Services update - consumer safety

• 7 Enterprise USB Bootable Windows Setup does not

  Hello! I am new to the community, so please forgive me for posting something incorrectly, but I'll be as descriptive as I can.

  I'm currently trying to boot Windows 7 Enterprise from a USB key, which normally works very well. The screen 'Windows loading files' rises, it starts implementing, but on the Setup screen, there is no text for me to the language selection or whatever it is. It's just the empty default image, nothing else.

  I have never seen this error before, nor have I met before. Does anyone know how to fix this?

  I tried to change the settings of the BIOS in class, which all, and form possible, still no luck.

  Any help is really appreciated.

  How long took you?

  Its possible the installation files used to create the bootable copy is corrupt.

  I suggest that you download a new copy of the volume license service center and recreate a bootable copy and try again.

  After getting the file .iso that you use it Microsoft .iso to USB/DVD tool to create a bootable DVD or USB (requires a blank DVD or USB flash to at least 4 GB key).

  

  For UEFI systems based

  If your computer is UEFI, they are normally the systems that come pre-loaded with Windows 8 or later, you need prepare the ISO for such a configuration file or you will receive an error during installation. The USB key must be formatted in FAT32 and use the GPT partitioning scheme. To do this, you must use Rufus, a small tool that you can download for free.

  

  Rufus - credit: Pete bastard/Akeo

  After installing Rufus:

  • Launch it
  • Select the ISO Image
  • Point to the file ISO for Windows 10
  • Check create a disk bootable using
  • Select GPT partitioning to EUFI firmware as the Partition scheme
  • Choose FAT32 NOT NTFS as file system
  • Make sure that your USB in the device list
  • Click Start
  • Close when you are finished

  Begin the installation.

  The following describes the standard way to start the installation, especially if you are in dual boot a 64-bit version of Windows 10 alongside a 32-bit version of Windows. Another way is to start from a version of runing Windows installation and select the partition where you want to install Windows 10. See below for instructions how.

  For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  

  Once your computer is configured to boot from the DVD, you should see this option.

  If you are installing from a USB key, see the instructions below how prepare your computer to boot from a:

  http://Windows.Microsoft.com/en-NZ/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

• Windows Windows 8 does not properly after deleting important files to user (already tried everything I found things different from +-10)

  well, I'll start from the beginning.

  the first big mistake I did was change the permissions of the administrator until he was the same trustedinstaller (without this I wouldn't do stupid things, but I did it for a change of details in the registry)

  the strange thing that I've been in conflict with, is that this pc was my mother, so everything to his e-mail address and his name 'Nancy' after some time she gave me the pc so I made my own top user account named "maxim" (that's my name) on my email address and probably deleted the user account from my mother named Nancy so no problem until something has started to bored

  the usersection in solution under C: contained Explorer still card Nancy with some of its documents on the left and some (I have something windowsrelated files)

  so I thought why not remove that card and saw that a card with my name was there too in the usersection, these same unknown files which I think are windowsrelated (btw, these files were hidden but ofcourse to check everything I have chekced the area to see hidden files in Explorer)

  I know not the name of all the files that I have demolished within this named Nancy in user card, but as far as I know, is that files that I noticed (these hidden files) are 7 files ntuser and those who are also in the plan named maxim in this usersectionso I thought no problem and delete the files as managed (with edited permissions)

  now I certainly delete files that I wasn't allowed to, and who were required to run windows properly, I know that, because of the errors, I am when I try to start things or when I try to fix things

  now I searched a LOT on the web especially in the microsoft forums and I fount a lot of 'solutions' that did not work for me

  most of the time, it was because I get an error because I could not more process these configurations etc.

  and somethimes as the scan SFC, he said that the correction of some problems, but there are many problems left that cannot be repaired in this way

  also almost everything I'm doing atm (also when I try to fix my problem) that I have to do with a big traverse most of the time I use "this run dialog box" or the command prompt

  now, these are all the things I tried

  -each 2013 thing tuneup utilities can do (scans included registery) of course I don't know the exact names of the files important I lost so I couldn't those used with tuneup

  -do you have some full scans with Norton 2013 (did not find any problem)

  -does this scan SFC and said there are still problems and has not noticed any difference

  -tried to update my pc did not work (missing windows services)

  -a tried to restart something in the registry did not work (missing windows services)

  -tried to make a new user on my pc did not work (missing windows services)

  -also tried lots of windows, fix things program (I forgot the name of it, but he could only tell me that he had problems and could not fix their)

  I'm shure that I have tried many other things so I mentioned in any case but I forgot the

  Many thanks if someone can help me out as sorry for the great story, but I wanted to tell all I know because it's a sensitive issue and please don't mind my bad English :)

  Maxim

  Your Windows product key can be printed on a label located on the underside of your laptop, if you don't you won't have it. Using the recovery partition, it is a good idea if you have no recovery on a disk media, often there is a Windows repair option, you can try this, however if there is no data on the first partition that you interested, I recommend you just format the partition for essentially erase everything on it and reinstalling Windows on the recovery partition. This will probably not require you to reactivate Windows by using the product key.

  If you cannot use the recovery partition to reinstall Windows, then you can go to this page (on the computer that is working properly) http://windows.microsoft.com/en-us/windows-8/upgrade-product-key-only and click on install Windows 8, save the file, run it and choose Install by creating media. This you will get an ISO file that you can burn on this disc you mentioned, just put the disc in your computer, right click on the ISO file and choose burn. It should also not ask to reactivate Windows, if you did no major hardware changes to the computer.
  Again, I would like to know if you need help with any of these steps or if none of these steps work for you.

• Windows Setup does not load driver Marvell D20

  Hello

  Installation: D20, the Marvell controller are attached: 2xHDDs RAID1 and an Intel SSD in a RAID configuration.

  The machine was initially installed with Windows 8.1 (on RAID1 disks), most later improved to W10.

  After a recent, (unknown to me), Windows problem entered a loop 'ASR Preparation. "

  I tried to use USB to recovery, but he did not see the drives.

  At this stage, downloaded driver from Marvell of the lenovo Web site. Note that there is only the version W7/W8.

  Tried to load the driver in Windows (for Windows 10) recovery, the load was successful, but start DISKPART after that froze the recovery. (Also tried to integrate the driver using NTLite, which resulted in recovery of freezing at startup).

  Has given up trying to recover and created 10 Windows USB installation. When I'm at the stage of selection of drive installation and selected the pilot of the "Load driver" dialog, the installation get stuck and animation of course load just went on and on. Subsequently tried to create Windows 8.1 and same media to install Windows 7. Also, who is stuck on the step "load driver".

  During the tests, I tried using different USB (version 3.0 and 2.0) drives. Also downloaded the driver for the Marvell from another Web site, just in case. Tried resetting the BIOS with the default settings. Nothing helps.

  Any ideas?

  Thank you.

  Thanks for the reply, I thought I posted what the problem was, but apparently I forgot.

  The problem turned out to be the SSD. BIOS and Windows recognized, but as soon as I/o operations were made, the player brought to stall. Even the first test SMART said the player was healthy, but the after run the test again, he has not done, and the drive is completely dead. Remove the SSD brought the machine back to life.

  Thanks again.

• Store Windows 8 does not properly

  I installed all the updates of windows, so I can install windows 8.1 and after I did I went to the windows store install 8.1 and when I click the icon it dosnt charge. Not the store, the store opens very well, in charge and shows apps, but when I click on an application (8.1 update or another application), I dosnt open it, it shows just the small animation (which shows generally when you click on and it dosnt open anything) I tried troubleshooting from another topic and I said that the store windows is corrupted , he sugested to clean the cache that I did and it's the same. Help, please.

  Edit: I find that I can install apps but I looking for their share, all applications on the homepage are idle, but if I search, I can install them. But there's always the problem with widnows 8.1 that I can't find it by searching and I can not access through the homepage! What should I do?

  Hi Kaloya,

  I suggest you try the steps from the following link:

  What to do if you have problems with a soft:

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
   
  If the problem persists, please follow the following steps.

  You can use the powershell command to reregister in the registry Windows Store.

  Open the prompt with administrator privileges and type the following command:

  PowerShell - ExecutionPolicy Unrestricted Add-AppxPackage - registry DisableDevelopmentMode-$Env:SystemRoot\WinStore\AppxManifest.xml

  Please post with the State of the question.

• Pre-installed Windows 8 does not properly.

  Hello

  I have a HP Elite 7500 desktop PC and it has a pre-installed Windows 8 Pro 64-bit. When I tried to set up for his first start, I have unfortunately to stop the process and when I restart the pc it says that you need to re - install windows. but the problem is that I don't have the disk to backup or restore. I already tried to retrieve using the hp recovery by pressing f8 before it starts, but it shows a white screen. and there is a message that is the recovery image may be missing because I could not complete the installation for the first start. How can I continue the installation? Help, please. Thanks in advance,

  You need to contact HP support as soon as possible help with a brand new computer. The computer should work right out of the box.

• Cannot update iphone, windows installer does not properly

  When installing update from apple, I get a message that the installation package contains no file. I have all the updates. Any suggestions?

  Hello downloadRA,

  You duplicate this issue even if you try to connect to a different USB port?  You're updated with all Windows updates?

  Please let us know.