Windows Sidebar problems since the installation of Vista Service Pack 2

Similar Questions

• during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

  Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

  You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

  Hope that you made the backup recommended all of your data before attempting to install Vista SP2.

• During the installation of Vista Service Pack 2 I get the following error message: ERROR_INVALID_PARAMETER (0 x 80070057)

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  80070057 ERROR_INVALID_PARAMENTER - E_INVALIDARG

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install SP2?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  Resources:

  How to fix the Windows Vista and Windows Server 2008 service pack installation issues:
  http://support.Microsoft.com/kb/947366

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Hang-up system to 76% during the installation of Vista Service Pack 1, 3/3.

  Hello!  I installed Vista SP1 last night and everything seemed to go well, except the system stagnates at 76% this morning at 04:00 (it is now 21:00).  I have the following message is displayed on my screen "installation of the Service Pack: step 3 3-76% complete.".  Do not turn off computer. "What should I do?  Help, please! and thank you!

  Finally, you will need to turn off if she does not finish install.

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  You then can he try again, or try a direct download.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  Vista 32-bit SP1

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

  Vista SP1 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  But you send messages in the wrong Forum.

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• The installation of Vista Service Pack 2 failed

  I had been facing a blue screen often enough lately when I downloaded the SP2. Windows has responded by "Windows can check the bluescreen the next time u log" but he wouldn't do anything.

  After downloading steps 1 and 2 were full. Step 3 0% would come the blue screen and the system will re-start. After that restart againit seems to 0%. So I chose, at the next restart, Mode without failure. Stage 3 took about an hour to reach 100%.

  And then he said that SP2 has been installed. Windows come back back change.

  Now, everything's fine. no problem at all. the system is normal.
  Only problem is that I don't get the option to install SP2 again.
  View these latest updates, he said SP2 failed.

  And I fear the same blue screen appear again if I somehow managed to get their hands on SP2.

  Aid to the blue screen and retrieve SP2.

  Hi Multiloop,
  Thank you for visiting the Microsoft Answers forum.
  I recommend you to perform a restore of the system to a point prior to the installation of SP2.

  * [Make sure that all security software (anti-virus, anti-spyware, firewall, etc.) are temporarelly disabled].
  To access the system restore, click Start and type restore, and then click Restore system from the results.

  Step 2
  ======
  Run the analysis tool
  http://support.Microsoft.com/kb/947821

  Step 3
  ======
  «Copy & paste following command prompt...» I hope this helps.

  "ipconfig/flushdns".
  CD %windir%\System32
  del /s *.chk; *.RIP; *.tmp; ~ *. *
  msiexec/regserver
  Start msiserver sc config = auto
  net stop msiserver
  msiexec /unreg
  msiexec/regserver
  regsvr32 /s msi.dll
  regsvr32 msihnd.dll/s
  net start msiserver
  Regsvr32 c:\windows\system32\wuaueng.dll/s
  net stop wuauserv
  CD /d % windir %
  rmdir /s /q c:\Windows\SoftwareDistribution
  net start wuauserv
  departure of eventlog sc config = auto obj = Localsystem
  net start eventlog
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  regsvr32 c:\windows\system32\wuaueng.dll/s
  SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  start wuauserv sc config = auto obj = Localsystem
  net stop wuauserv
  SC config bits start = DEMAND obj = Localsystem
  net stop bits
  regsvr32 msxml.dll/s
  regsvr32 msxml2.dll Kbps
  regsvr32 msxml3.dll/s
  regsvr32 msxml4.dll /s
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  regsvr32 c:\windows\system32\muweb.dll/s
  regsvr32 /s winhttp.dll
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 wuaueng1.dll/s
  regsvr32 c:\windows\system32\dllcache\wucltui.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 wups2.dll/s
  regsvr32 wuweb.dll/s
  net start wuauserv
  net start bits
  sc = auto config cryptsvc start
  net stop cryptsvc
  %WinDir%\System32\Catroot2 CD
  del *. * / f/q/s
  regsvr32 cryptdlg.dll/s
  regsvr32 cryptui.dll/s
  regsvr32 dssenh.dll/s
  regsvr32 gpkcsp.dll/s
  regsvr32 initpki.dll/s
  regsvr32 mssip32.dll/s
  regsvr32 sccbase.dll/s
  regsvr32 softpub.dll/s
  regsvr32 slbcsp.dll/s
  regsvr32 rsaenh.dll/s
  regsvr32 /s winhttp.dll
  regsvr32 wintrust.dll/s
  net start cryptsvc
  cd\
  sc config = ose start request
  net start dare
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  regsvr32 es.dll/s
  CLS
  REM * end *.
  pause
  output

  Step 4
  ======
  Restart the computer

  Step 5
  ======
  Download and install the SP2 stand-alone
  http://TechNet.Microsoft.com/en-us/Windows/bb738089.aspx

  Hope this helps

  Thank you

• Problems printing MS programs after the installation of Vista Service Pack 2

  After installation of SP2, I can print is more than MS Word. I can print from the web, but when I send something to print from MS Word, it seems to go to the printer, but nothing happens. The printer icon shows in the task bar at the bottom of the screen but no document is displayed as pending and nothing prints. I tried the suggestions I've seen on this forum including to perform a clean boot and run the System File Checker. To solve the problem. I do a lot of printing of the word, so it is a major issue for me. I can't keep running at the public library to print my documents! Aaaaargh.

  You tried the simple expedient of detection/repair or Office Diagnostics, depending on your version of Word.
  Check with the manufacturer of your printer that does not have a printer available update driver?

• Download Windows Installer for Vista Service Pack 2 is not found! Help!

  Hello

  I desperately need help.  My windows installer does not work and I have tried everything to get it going, the reinstatement of the installer and do a system restore.  The first time I did the restore system it started working, but after installing the program, I needed I got a second program that must be downloaded.  The second download received error 1719 and impossible to download once again.  I was informed by my techno I would probably need download Windows install for Vista Service Pak 2.  I have received the link below, but was not able to find it?  Is there anyone who knows where I can download it.

  This is the link that has given me is not the one for Vista Service pack 2: http://www.microsoft.com/downloads/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Hi kookykaren,

  1. you remember to make changes to the computer before this problem?

  The link provided also applies to Windows Vista SP2.

  You can try the following steps and check if you can download the installation program.

  Method 1:

  Reregister windows install.

  a. Click Start, click Accessories and then click command prompt.

  b. at the command prompt, type the following and press ENTER after each line:

  MSIExec /Unregister

  MSIExec/regserver

  Method 2:

  Make sure that the Windows Installer service is started.

  a. Click Start, type services.msc in the search box and press ENTER to open Services.

  b. right click on the Windows Installer service, and then click Properties.

  c. If the startup type box is set to Disabled, change it to manual.

  d. click OK to close the Properties window.

  e. right click on the Windows Installer service and then click Start. The service should start without errors.

  f. now try to install the windows Installer 4.5 from the link you mentioned

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite P100-324: problems with the installation of Vista-> cursor flashing

  All greetings. Tried to put one of these days of Windows Vista. But my attempts to failure are completed. After the first? There is a black screen and blinking cursor. So any activity HDD and DVD, it is not respected. Recently updated BIOS updated to v3.30. Help put already and I do not know what to invent.

  For English I apologize, I'm of the Russia :)

  Hello

  Have you tried to format the HARD drive and reinstall Vista?
  Try to access the BIOS and check if the HARD drive is recognized in law.

  What exactly happened during the installation of Vista?

• Computer problems since the installation of Microsoft Security Essentials

  Since the installation of Microsoft Security Essentials, my computer will stay only in mode "sleep" for a minute or two and then turns back on. Also when I turned off the computer, Microsoft Security Essentials also stops, and I have to turn it back on when I start the computer. I had the two trend micro PC-cillan and Macafee security on this computer. But I uninstalled them before installing Microsoft Security Essentials.Also my computer is supposed to go to mode after half an hour of not used but he is staying on.

  Hello

  You should never have 2 AVs installed at the same time

  you say you had trend and McAfee all both installed

  only, cause you system problems that

  Make sure that the trend and mcafee have beeen completely removed using their removal tools

  McAfee removal Tool

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  Trend removal tool

  http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  For more MSE questions please repost the link below in the MSE forums

  http://answers.Microsoft.com/en-us/protect

• Some files have been moved and are inaccessible after installation of Vista Service Pack 2

  For several months, I had been unable to install the latest updates of iTunes, always get the message "Could not access network location %AppData%". Recently, I realized that I had apparently never installed Windows Vista Service Pack 1 or 2 and the practice which finally allowed me to install iTunes 9.2.

  The problem I have now is that one (or two) of these Service Packs created a new profile user labelled 'TEMP' folder and that's where all my iPod apps seem to have "evaporated" to. I say evaporated because iTunes cannot locate, and when I access the folder of the user 'TEMP' (even using my administrator account), I found only a few subfolders (AppData (, LocalLow, Microsoft, CryptnetUrlCache), and those are all empty.  Either way, my administrator user account no longer shows upward at all when I use my 'normal' user code

  Making windows for .ipa files search is the only way I can see same registrants, but then when I try to open the location of file (Mobile Applications C:Users\TEMP\Music\iTunes) I get an error "the location is not available", which suggests that the information may have been moved to another location.

  I am running Windows Vista Home Premium 32-bit, Service Pack 2.

  Support Microsoft offers FREE for Vista SP2 issues support at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1.  I'm sure they can help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to get audio back after installation of Vista Service Pack 1 - help pages don't help do not

  I was prompted to install Vista Service Pack 1 and audio lost. I followed the microsoft help pages to uninstall the sound driver and reinstall by using the Device Manager. But after that uninstall the audio driver disappeared and did not automatically reinstall as described. How can I return the audio? Help!

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for the latest Audio from Vista drivers > download/install them.

  If the above does not work:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite P100-102 works badly since the installation of Vista

  Hello!

  I installed Windows Vista on my Toshiba p100-102 (A3E) but I had a 'small' problem. In each 3D app, I had a lot of shifts and slowdowns. I think it's a problem with the graphics card and I think the grapics card fan works slow since installing vista. Thus it reduces the mhz for a few moments (1 minute at) (I think, I'm not shure)

  so... anyone have any idea what I can do? Maybe should I use an alternativ graphics driver?

  SRY for my bad English = /.

  Oxford

  Hello

  did you properly installed all the drivers for your system? It s absoulutely necessary that everything is correctly installed and configured.
  Another thing is: Joanie to install the latest version of the bios, because I had a problem with my Satellite A100 after installation of Vista and I was able to solve it with my bios update.

  Regarding the graphics drivers, I can give you some links that might help you with your performance problems:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  Try these links and you will find drivers for your VGA. And please look carefully, a lot of people I have given the link tell me that they don t find anything, but the drivers are there.

  Welcome them

• Wireless connection - problems since the installation of our BT package

  Since the evolution of our package BT last year, we have been unable to connect to one of our computers with a Windows operating system on a wireless basis. We have transformed a machine to the Linux operating system and that connects to each time. The old Center has been postponed, but did not make a difference. BT feel is the environment, however why the OS linux connect wirelessly. Can be a help for this?

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

  You must set up a wireless internet connection in the network as well as the connection sharing normal LAN wireless and connect to it as well as the local connection.  If you don't do this, you will not have an internet connection.  You need both.  You must also enable some features in the main area sharing network to access the internet - they are quite well defined.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CD/DVD-ROM not recognized since the installation of Vista, without errors

  Installed Vista and lost CD rom? CD works can be heard during the execution but system will not find CDROM? Deleted upper and filters low but still will not find CD ROM?

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I uninstall Firefox as PC has had problems since the Installation

  I installed Firefox on January 7, 2014 and have had problems since with PC windows 7pro. The PC is slow and a few minor problems. I tried to uninstall Firefox several times but without success. The problems may not be because of Firefox but why can't uninstall the program.

  Please notify. Thank you

  Jim cordially

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox