Windows speech recognition stops randomly with the error: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. »

Similar Questions

• Error: "the instruction at 0x010acd0c referenced memory is not able to be read. "SQLDUMPER library not initiation" to start Windows XP.

  Original title: SQLDUMPER library initiation.

  From the start of my computer, I get the following error message:

  "The instruction at 0x010acd0c referenced memory is not able to be read. "SQLDUMPER library not initiation.

  What can be done to perfect this problem?

  Dump SQL program is a program that helps you to debug the SQL database on your system crashes.

  If you don't have SQL Server installed on your system or don't know what it means, that the software SQL debugging could subsist a trial version of the software you installed and uninstalled then more late leaving the program SQL dump and now he doesn't know what to do with himself.

  Take a look in Add/Remove programs to something like this:

  Microsoft SQL Server VSS Writer

  If find you it and know that you are not using SQL Server, uninstall Microsoft SQL Server VSS Writer, restart and see what things look like.

• Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  Thoughts?

  Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  I've uninstalled Reader and reinstalled, but the problem remains.  I also tried to repair the installation and that doesn't work anymore.

  Thanks for the tip.  It turned out that kind Reader has been commissioning in protected mode.  I changed the setting and it prints now as before.

  Thank you

• The instruction at "0x6280436a" referenced memory at "0x0a055284" memory could not write click on OK to terminate the program.

  The instruction at "0x6280436a" referenced memory at "0x0a055284" memory could not write click on ok to terminate the program.

  Some programs that you have running is a failure. You have to find what it is that you can take appropriate measures such as uninstall/reinstall the program if it is legitimate. The first thing to do is to always make sure that the computer is free of viruses/malware:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If the computer is clean, you can use a combination of Process Manager, the Configuration system, AutoRuns and boot in diagnostic mode utility to find out what is running and otherwise.

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx

  You can get Process Manager from the same link from Sysinternals above.

  Clean boot in Windows XP - http://support.microsoft.com/kb/310353
  Boot minimum troubleshooting Windows XP - Advanced http://support.microsoft.com/kb/316434

  MS - MVP - Elephant Boy computers - don't panic!

• Event 45, volmgr. Windows 7 x 64 SP1. "The system could not sucessfully load the crash dump driver."

  The crash dump driver fails to load at startup.  When the system crash it does not blue screen and reboots the system.  I want to get it going so I can read the crashdump...

  There is a fix out there for pre Windows Vista SP1 that appears very relavent but will not be installed (by his design of the correction).

  Details below...

  Log name: System
  Source: volmgr
  Date: 18/05/2011 08:54:37
  Event ID: 45
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Cryogen
  Description:
  The system could not sucessfully load the crash dump driver.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      45
      2
      0
      0 x 80000000000000
     
      39071
      System
      Cryogen
     
   
   
      \Device\HarddiskVolume3
      0000000001000000000000002D0004C003200000BB0000C000000000000000000000000000000000
   
  

  Name of the operating system Microsoft Windows 7 Ultimate
  Version 6.1.7601 Service Pack 1 Build 7601
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the CRYOGEN system
  System manufacturer system manufacturer
  System product name model system
  System Type x 64-based PC
  Processor Intel (r) Core i7 970 at 3.20 GHz, 3201 Mhz, 6 Lossnay, 12 or logical processors
  BIOS Version/Date American Megatrends Inc. 1301, 16/11/2010
  SMBIOS 2.5 version
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "6.1.7601.17514".
  Cryogen\Charles user name
  Eastern Daylight Time zone
  Physical memory (RAM) installed 24.0 GB
  24.0 GB total physical memory
  18.1 GB available physical memory
  48.0 GB total virtual memory
  41.8 GB available virtual memory
  Page file space 24.0 GB
  File E:\pagefile.sys

  Drop the question above actually lead to what may be a solution... The fix for Windows Vista pre SP1 fixes an issue with the (cloned) dynamic disks used to store the paging file.  I have two drives on the clone (E:\) which the system information noticed the location of the swap file.  I put the pagefile drive to C:\ in the event where it was the same problem, such as reported in the hotfix, but it has not fixed the problem...  So I assumed that this fix has been exceeded and a coincidence. But the information system showed the swapfile E:\, my dynamic disks...

  What has removed the error is "double adjustment" the return to C:\ drive.  Apparently once is not enough.  I put the pagefile on C:\ managed and rebooted system.  Then I noticed the mistake of volmgr came from miroir3 (second player in E:\) still info system showed the swapfile on C:\.   Weird indeed.  I went and be given the C:\ drive as the system swap drive to managed by activation/deactivation/Executive every car out of the current value, and then back to the desired direction.  After having done that and restart once more the error no longer appears in the event viewer at startup.

  The only thing worse than a BSOD, no BSOD.

• Try reinstalling firefox on a windows machine 7 and I get «the application could not start correctly (0xc0000142)»

  To solve a different problem, I uninstalled Firefox. After you have solved the other issue I'm tying to re - install Firefox and get an error message that says that "the application could not start correctly (0xc0000142). Click OK to close the application. "The title bar of the window, said"setup - stub.exe - Application error. "My PC is a Dell Studio 19 all-in-one running Windows 7 Home Premium.

  I ended up solving this problem by doing a reinstall on Windows 7 site. It took a little while but fixed this and a few other issues I've had.

• When XP starts, make a mistake 'instruction to target Ox7c919af2 memory @ Ox00000010. The memory could not write. »

  This message appeared at the start.  I clicked on Cancel to debug, but it keeps appearing whenever I start my computer.  Someone knows why?

  What a pity that the forums MS Answers does not prompt for any information system when a new question is asked.

  Resolution of the problems would be much faster and without a lot of trial and error and guessing if this was the case.

  If you see messages similar to this:

  Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". Memory could not be "written".

  It seems that the last update for Windows Media Player may contribute to this problem when the system has the Windows Driver Foundation Service active and running.

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you should disable the WDF Service.

  Click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services Applet

  Locate the Windows Driver Foundation - User-mode Driver Framework service, right-click on the service, select properties and choose disabled and OK your way out of the Services Applet to save the changes.

  Note that you will not be able to 'Stop' Service first, but it's OK.

  Restart your system (the WDF service is now disabled) and check your failure condition now.

• The referenced memory could not be read

  When I stopped Windows XP Professional (32 bit), SP3 the following messages will appear on my screen:

  MDNSresponder:

  The instruction at "0x605e4b81" referenced memory at "0 x 00844204. The memory could not be read.      Click OK to finish or click on Cancel to debug. No matter what option I choose, the warning message reappear when I shut down my PC. What should I do to get rid of this obstacle?

  Some programs that you have running in the background is a failure. Make the boot minimum troubleshooting to find the culprit, then you can deal with it appropriately.

  Clean boot in Windows XP - http://support.microsoft.com/kb/310353
  Boot minimum troubleshooting Windows XP - Advanced http://support.microsoft.com/kb/316434
  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  MS - MVP - Elephant Boy computers - don't panic!

• When I start my pc there is a notice:-"the instructions of the '0x00402c60' referenced memory could not be read.

  How can I stop the view on my screen when I start my pc that says that the memory could not be read?

  Hello

  1 did you changes to the computer before the show?

  2 are you able to start the computer on the desk?

  3. What is the brand and model of the computer?

  Method 1: Run the fixit diagnosing memory problems

  http://go.Microsoft.com/?linkid=9759543

  Method 2: To resolve this problem, increase the size of the swap file:

  Click Start, right-click my computer, and then clickProperties.

  In the System Properties dialog box, click the Advanced tab.

  In the results pane, click settings.

  In the Performance Options dialog box, click the Advanced tab.

  In the virtual memory section, click change.

  Change the initial size value and the value of the maximum size to a value above, click onthe valueand then click OK.

  Click OK to close the Performance Options dialog box, and then clickOK to close the System Properties dialog box.

  See also:

  Maintenance tasks that improve performance

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

  Please let us know the result.

• XP Professional quality error message - Instruction at "0x7e4195c8" referenced memory at "0 x 00000048 '...

  I have just updated to Windows XP winXP Pro personal and now get the message.   The instruction at "0x7e4195c8" referenced memory at "0 x 00000048" memory could not be read also internet explore open

  HI thanks,

  WinXP Home was originally on my computer.

  The computer is a Sony Vaio model # PCG - 6K1L

  Installed is Windows XP Professional SerPK3

  Since posting this message, I talked to a Microsoft technician on four separate occasions, for more than an hour each time.

  We finally got Internet Explore upwards and currently underway.

  We were able to get my AOL to exploit. It does not install on a disk that I used to install it on my PC, it will not install on internet. We tried several verisions. The tech has ordered my computer remotely and removed spyware and software malware with some programs. The message we get is that I don't have enough disk space or memory, I'm only using 1/3 of each available. The tech thinks that XP Home Edition does not uninstal when I installed XP Professional.  CHKDSK /R works as I type and technology will call me in an hour, for the results and this will be our 5th Conference.  I've never had this kind of service before I praise only for the technology.

  Incidentally, I had some problems when I upgraded toXP professional serpk2 serpk3 professional XP on my PC, but they were resolved in a few hours.

• Svchost.exe error application at startup of 0X7c91b21a memory could not be written 0x00000010

  This happens at startup and said only cancel or debig. Ever time of the effects too system browser and begins rehearsals are

  Hello

  I found a solution to an error message at startup that States that memory could not be written to 0x7c91b21a 0x00000010.  It seems that the last update for Windows Media Player causes this problem. If the Windows Driver Foundation service. is turned on, the ITI must be disabled.  I found this at Bleeping computer and this solution worked for me.  Cathy

  http://www.bleepingcomputer.com/forums/topic261076.html

• Windows Vista Home Basic - problem with the icons does not meet various Windows services after trying to download updates

  I use Windows Vista Home Basic on a Dell Inspiron 1501.  I have recently accepted that some guest downloads Windows with terrible results.  First downloads do not appear to have been accepted and the system of guard stop and startup trying to cancel.  Second as I result, I seem to have lost access to a range of Windows tools.  For example in Panel I can't open system icons or Windows Update.  Nor can I access these services from any other avenue on the computer.  Whenever I have find an icon or a file screen flashes a dialog briefly and then disappears.  The effect of this is that I'm completely unable to access or to implement the recommended tools or services that could solve this problem.  My ability to manage my computer has been reduced to zero.  Dell were not receptive and I can't get a response from Microsoft

  worm post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  One thing you can try try the system restore, safe mode.

  Start the computer in safe mode with networking capabilities (hold DOWN F8 while the computer starts).

  To start your computer in safe mode, you can check the link below:http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx>

• SVC.exe error Application 0x7e91b21a @0 x 00000010, memory could not be written

  When I start my computer. I get an error message.

  SVC. EXE Application error

  This is a popular remedy:

  It seems that the last update for Windows Media Player may contribute to this problem when the system is Windows Driver Foundation active and running.  Unless you use the Windows driver FoundationService, deactivate it.

  Click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services Applet

  Locate the Windows Driver Foundation - User-mode Driver Framework service, right-click on the service, select properties and choose disabled and OK your way out of the Services Applet to save the change.

  Restart your system (the WDF Service is now disabled) and check your failure condition now.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Speech recognition CONTINUES to press the key "Home".

  Speech recognition is pretty accurate, but often run unwanted orders. In particular, when I'm in a web browser and I breathe, click the mouse, or adjust my chair, for some reason speech recognition which recognizes it as 'home '. Is it possible to simply disable this command? I NEVER want to use speech recognition for this. I am more than willing to go through the arduous task of moving my mouse on the button "Home" on my browser by clicking. PLEASE DO STOP!

  When I'm in a web browser and I breathe, click with the mouse, or well to adjust my chair, for some reason recognition speech which recognises as 'home '. Is it possible to simply disable this command?  PLEASE DO STOP!

  WSR, Windows speech recognition, is listening to the sounds of the words. However, the outside sounds in the environment are often interpreted as words if they enter the audio stream between your mouth and the microphone. The best answer is to eliminate these sounds in the audio stream. If you use a microphone to field far as those built in the computer/Tablet notebook, trying to say stop listening when you dictate not and then start listening when you want dictate or issue commands. Alternatively you can hold down the Windows key and tap the control key to act as a toggle On / Off.

  For better accuracy, you should use a good noise canceling with close talking microphone. The simplest are those found on headphones with the MIC at the end of a boom in wire. If you already use a good noise protection headset, place the element of the microphone at the end of the boom on the corner of your mouth. This will prevent noise into the audio stream. (Deleted by FM)

  Marty

• Left speaker not working is not after the use of windows speech recognition

  I use Windows 7 Professional. Yesterday, I used Windows speech recognition & after reboot my left speaker stopped working. I checked with headphones, but not sound in the left speaker. I uninstalled the audio drivers & installed back, but still no change. I'm sure that there are no hardware problem. I think I need to recreate the image on my OS. Please suggest if there are other options other than the new image of my laptop

  Hi Kitenge,

  The problem may occur due to the sound on your computer settings.

  Check the levels of the speakers, see the following steps:

  1. Type in mmsys.cpl in the Windows 7 start menu search box and press ENTER.
  2. In the sound Properties window, double-click on the speakers (icon) option.
  3. Then, in the newly opened speakers properties
  4. Double-click speakers.
  5. Under playback, double-click speakers.
  6. Click the levels tab, and then click the Balance.
  7. Make sure that the left speaker volume is set properly.

  If the problem persists, refer to the following suggestion.

  This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones. Check out the following link and check the status of the issue.

  No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.