Windows start up RUNDLL error: could not find C:\WINDOWS\fsrsap.dll

original title: Error Message

I keep geetting RUNDLL error: cannot find C:\WINDOWS\fsrsap.dll at startup. How to replace these files?

It is always sensible in this situation to achieve a malware check

Download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.

http://www.Malwarebytes.org/

Download and run SuperAntiSpyware (Free Edition)

http://www.SUPERAntiSpyware.com/download.html

Tags: Windows

Similar Questions

  • whenever I re - start the computer I get this error: could not load the file nta0104.dll.

    "original title: NTA0104.dll.

    whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?

    HM

    Hello

    Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If the error persists after scanning use this program to out startup

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  • error - could not find capable video game modules

    First Pro CS5 - does not start after you install the 5.03 update. New machine with only Adobe Master collection installed, iCore 7-980, 12 GB DDR3, 3 drives sata and Nvidia FX 3800. error - could not find capable video game modules

    You may have been affected by the bug to "return to the trial" (do a forum search) where the solution is to uninstall and reinstall run the clean script 2 - 3 times

  • Error: Could not find or load class main oracle.apps.ad.tools.configuration.JaznCredentialManager over the automatic configuration

    Hi all

    We're performing an upgrade to 11i, R12, and the same durinf find the error during the configuration of the applications below.

    AutoConfig Services Phase

    Running process of Service 6 of 8 for AD_TOP

    The execution of script in InstantiateFile:

    /oracle_uat/XX/R12/apps/tech_st/10.1.3/Perl/bin/perl-je /oracle_uat/xx/R12/apps/tech_st/10.1.3/perl/lib/5.8.3-je /oracle_uat/xx/R12/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3-je /oracle_uat/xx/R12/apps/apps_st/appl/au/12.0.0/perl-je /oracle_uat/xx/R12/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /oracle_uat/xx/R12/inst/apps/xx_xx/admin/install/txkExecSetJaznCredentials.pl

    script gave:

    ****************************************************

    ERRORCODE = 1 ERRORCODE_END

    .end std out.

    Error: Could not find or load the class main oracle.apps.ad.tools.configuration.JaznCredentialManager

    .end err out.

    ****************************************************

    Found the fix when $CLASSPATH has been disabled, but the strength to help here.

    You guys could give me an overview on likely areas that I could check.

    Thank you

    Hello

    Have you checked that the file JaznCredentialManager.class is well under

    Directory JAVA_TOP/oracle/apps/ad/tools/configuration of $?

    This class file is delivered by 12.1.3 (fix 9239090), R12. ATG_PF. B.Delta.3 (patch 8919491)

    and R12. T2K. B.Delta.3 (patch 8919489).

    Kind regards

    Phil.

  • vcbSnapAll error - could not find host

    I'm trying to run a backup script that uses the vcbSnapAll command. It was working fine a few weeks ago and then I noticed that my backup stopped. I took a look in the error logs and found this:

    2008-12-12 22:00:42.557 'vcbSnapAll' 3076469568 talker Home & lt; host name & gt; (& lt; hostname and gt ;) is not known to this instance of VirtualCenter.

    2008-12-12 22:00:42.557 'vcbSnapAll' 3076469568 error Error: Could not find host & lt; host name & gt; on this instance of VirtualCenter.

    I tried specifying "localhost" and even the IP address instead of the hostname, but that has not worked. Any ideas?

    Thank you

    Dennis

    what output you get the command "hostname"? This is the FULL domain name or just the short name?

    Check the configuration of the client of VI - ESX

    Home-> Configuration-> DNS and routing-> the two mentions (name):

    and domain name :) must be completed.

    Check your host file and make sure that you can resolve the name of the server correctly

    If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!

  • Pogo games error "could not find popo align xd does not.

    Original title: Pogo game problem

    I have problems playing some games Pogo. On some games, I get the message "could not find popo frame xd does not." (19 undefined)

    When I close this message that will show the game loads again, but same message arrives.  I am a member and play most of the games as usual, but some of them will not play and that is the message I get.

    On all the games that won't play it trys to load with you game will start in 20 seconds, which is the usual games message if you are not a member.  I am a member, but I get this message on all games that won't load with could not find the frame of pogo.  Then I get a pop up message that says "you are currantly prevented to play this game.  Please try again later.  Any Suggestions? Is this a problem with pogo or is there a problem with my computer.  Help appreciated.  Thank you.

    Hello
     
    We are pleased to know that the problem is solved.  Please do not hesitate to contact us in the case where you are facing problems with Windows in the future.
  • When I open my browser Google Chrome I get error "could not find the translation file:...\pivot.ini [WPCTRL95] does not work.

    Hello

    I have the same problem. The error message appears when I open my browser Google Chrome (Yes, only that browser). The full message is: could not find the file:...\pivot.ini translation [WPCTRL95] will not run.
    What kind of changes? As far as I know, I did not bring changes of lipids to my computer or programs. The thing is that I for a moment, and I don't recall the exact moment when it appeared.

    Hello

    Please take a look at the thread similar here with a solution as possible.

    I hope this helps!

  • Application Plugin error - could not find the entry Point (48::72)

    Hi all

    Anyone who bought my plugin has reported these errors when applying:

    invalid filter (25::3)

    could not find the main entry point for myplugin.plugin (48::72)

    They use CS6 on Snow Leopard on a Mac Pro 3.1 10.6.8 so this should work very well (the effect was compiled as a 64-bit using the latest XCode plugin, the Mountain Lion 10.8.5).

    I was wondering if anyone here has had this problem, and how they have solved.

    Thank you!

    Christian

    We managed to repro this on a machine running OS x 10.7.

    It turns out that it was probably due to one of the two parameters of generation in XCode:

    Basis of SDK, that I put OS X 10.9, and (most likely) OS X deployment target, which is the default value for the compiler. By reducing the Base SDKS to 10.8 and setting the target of 10.5 deployment. This fixed the problem on the machine 10.7.

    Waiting for the user who reported the problem to confirm the re-compiled version works on his workstation. However, I thought that I would put the solution here, just in case someone else has this problem in the future.

    Christian

  • Retrieving error - could not find the path of the image... M:/RecoveryImage/install.wim

    So, I went out and bought the USB on the gateway site to restore this laptop again and when I tried to do, he says recovery failed - could not find the path of the image M:/RecoveryImage/install.wim.

    I contacted support and they issued me a replacement USB drive, I get the same failure.

    I diagnosed the HARD drive and it passes.  I used diskpart to 'clean up' the disk drive HARD all nothing doesn't.

    [Under the direction of privacy] order number

    What gives?

    Acupro1,

    I you sent a PM with respect to research purposes.

  • Error: could not find c:\windows\idew321.dll in the beginning upward

    This error at the end of the boot.  Cannot find any references to this dll through Google searches.  I got infected with a virus called system tool and wonder if the virus is still there, looking for this dll.

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:

    No matter what you use for malware protection, follow these steps:

    Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

    They can be uninstalled later if you wish.

    In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

    Restart your computer and solve the outstanding issues.
  • While trying to install Zone Alarm, I got a problem of uninstalling 32 encountered error could not find c:\windows\system32\vsutil.dll, install error # 127

    While tring to install zone alarm error message uninstaller 32 met problemcould, I received not find c:\windows\system32\vsutil.dll must close this happened during the configuration after installation error # 127 {2abf85a 2abf792 2abf856} program za installed on the other 2 computers very well I think it's a problem with this computer windows

    Original title: help please

    Support for contact Zone Alarm. It's their product.

  • Error "could not find any DirectX 9 .0c compatible adapters in this system!" while playing the game sims 2.

    Original title: programs accidentally deleted now the directx features are not available

    Hello Im trying to play the Sims 2 that I played before on the PC, but the error message "cannot find any DirectX 9 .0c compatible adapters in this system!

    I accidentally deleted a program of direct x on Add/Remove programs during a cleaning upward. I think that's the reason why this message occurs.

    I tried to restore my computer to before the accident, but there was no earlier restore points. I also tried reinstalling direct x updates from microsoft, but always the same error occurs.

    I can't find discs that I got with the computer when I bought it.

    Here are my computer details.

    Microsoft windows professional (5.1, build 2600)

    Acer

    Aspire T660

    DirectX version: directx 9 .0c

    In the view of dxdiag no direct features x are available so I can't help him.

    Help, please! Thank you!

    Hello

    You can check for the link if available on the computer video card is compatible to run the game below.

    http://TheSims2.EA.com/help/detail.php?help_id=21

  • Error: Could not find compiled resource bundle "components" for locale "en_US".

    We are porting a large enough body of the Flex3 code developed as part of FlexBuilder 3 to Flex4 under FlashBuilder 4.  Most of the conversion seems to work very well, with one exception.  When I run the version of Flex4, all my exchanges of data with the server works.  Just as he is about to display the user interface, the following error occurs:

    Error: not found compiled resource bundle "components" for locale "en_US".

    I actually use a locale of en_US, but I guess that it could not conclude that revenue back to en_US, has yet again and then barfed.  If I look in

    ~ Adobe Flash Builder 4\sdks\4.0.0\frameworks\locale\fr_FR

    I see a lot of swc and of course not «components.swc» files  I think the problem is that our code Flex3 is using mx components, and compatibility mode is not correctly handles it for some reason any.  I think it is mainly from our internal user interface library.  The properties of this library (and for my main application, I'm testing now) have:

    -Use default SDK (currently 'Flex 4.0')

    -Use Flex 3 compatibility mode

    -Use the minimum version (Flash Player) required by the Flex SDK kit

    -Enable strict type checking

    -Enable warnings

    I also tried to put the compatibility flag command-line compilation mxmlc, without a change in behavior.  This project is built with the following script:

    Ruby scripts/concat_properties.rb o resources.properties ^.
    src/main/Flex/local/FR_Common/res_myname_fr_common. Properties ^.
    src/main/Flex/local/FR_Common/Scout/res_myname_scout_fr_common. Properties ^.
    src/main/Flex/local/en_GB/res_myname_fr_fr. Properties ^.
    .. /.. /Scout/common/src/locale/FR_Common/mypals/resources.properties
    mxmlc-local = en_US-source-path =. ^
    -compatibility-version = 3.0.0. ^
    static-RSLS = true ^.
    -resources include-resource-bundles = ^.
    -output src/main/resources/bundles/mypals/fr_fr_resources.swf
    copy src\main\resources\bundles\mypals\fr_fr_resources.swf ^.
    bin-debug\bundles\mypals

    What did I miss?

    When you compile your SWF application, use the - resource-bundle-option list indicating something like - resources-bundle-list = C:\bundles.txt. The compiler must write to this file the names of all the bundles of resources that your application uses.

    Then add all these names together in the - include-resource-bundles option when you compile your modules of resources, so that your resource modules have not only your own resources, but also the resources required by classes in the framework that your application uses. Use a comma-separated list as - include-resource-bundles = resources, core, the container controls. Specify additional source paths so that it can find the .properties files for these packages, which are located in directories such as frameworks/projects/framework/bundles/en_US, frameworks/projects/mx/bundles/en_US, frameworks/projects/candle/bundles/en_US. You can use {local} instead of the actual location, as in frameworks/projects/framework/bundles / {local}.

    If this does not resolve the problem, I'm afraid I'm out of ideas.

    Gordon Smith

    Adobe Flex SDK team

  • Error: Could not find the com.sun.deploy.ControlPanel of the main class when tried to open the Java Control Panel

    Original title: could not open the Java Control Panel

    I just downloaded a new update of Java 6 and it doesn't work. I use Java to view charts & graphs of changes in the stock market & it works with applications that I used before, but not for that I started to use after the new update has been installed.

    I tried to fix it by clicking on the Java Control Panel & I get this message:

    Class main com.sun.deploy.ControlPanel is not found

    How can I fix?

    Hi Chris240560,

    Try to Uninstall and reinstall java and check the result.

    For further assistance, we recommend you to make contact with The team of Support of Java for better assistance.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Unable to connect network [11001] error: could not find [localhost:2423]

    Hi all

    Unable to connect to Essbase Excel addin.

    When I click on sign in in the menu essbase.

    I fill the details such as the server name, user name, and password.

    It connects and dosent show applications or database.

    If I give the name of the server = servername:2423 (as a port not) I receive this error network error [11001]: cannot find [localhost:2423].

    I edited the host file also.

    I have two instance essbase. We're on the default port and another on no. 2423 port.

    Essbase server: 9.3.1

    Essbase client: 6.x

    Help, please.

    Kind regards
    Mink.

    AGENTPORT

    and NODENAME need your server name.

    Published by: RobertR3 on May 8, 2009 14:46

Maybe you are looking for