Windows starts in Windows error recovery

original title: problems of windows vista home Premium

I have a laptop HP Pavilion Entertainment PC and when I tried to start it wont boot, it doesn't try and goes to windows error recovery, after 16 seconds, it will go to the windows Boot Manager, I can't find my repair disk to try to fix it and I don't know what to do, except take a shop I have contracts and pictures of my children and grandchildren on here, I don't want to lose, can I do to get it back without losing information?

Mark

Follow these steps to try to solve your problems of boot.

 

Restore point:

http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

Do Safe Mode system restore, if it is impossible to do in Normal Mode.

Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

Try a restore of the system once, to choose a Restore Point prior to your problem...

Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

http://www.windowsvistauserguide.com/system_restore.htm

Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

Download the ISO on the link provided and make a record of repair time it starts.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

http://www.bleepingcomputer.com/tutorials/tutorial148.html

Link above shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

Read all the info on the website on how to create and use:

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista startup repair disk.

You can do a system restart tool, system, etc it restore.

It is NOT a disc of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Data recovery:

1. slave of your hard drive in another computer and read/save your data out there.

2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

3 Alternatively, use Knoppix Live CD to recover data:

http://www.Knopper.NET/Knoppix/index-en.html

Download/save the file Knoppix Live CD ISO above.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

http://isorecorder.alexfeinman.com/isorecorder.htm

Download the Vista software from the link above.

After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

Click on the icons of hard drive to open and to understand which drive is which.

Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

There is no Vista free download legal available.

Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

Normally, they do this for a cost of $ small.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

Normally, you have to press F10 or F11 at startup to start the recovery process...

Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

They will tell you how to do this.

Every computer manufacturer has their own way of making recovery disk/s.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.

There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

http://support.Microsoft.com/default.aspx/KB/918884

MS advice on the conduct of clean install.

http://www.theeldergeekvista.com/vista_clean_installation.htm

A tutorial on the use of a clean install

http://www.winsupersite.com/showcase/winvista_install_03.asp

Super Guide Windows Vista Installation

After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

Save all data, because it will be lost during a clean installation.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

http://support.Microsoft.com/default.aspx/KB/326246

'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Windows error recovery. Windows could not start... _

    My Dell laptop I have from 10th July indicates the following:

    Windows error recovery

    Windows could not start.  A recent hardware or software change might be the cause.

    If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, chose to start windows normall7

    Start the reboot system (recommended)

    Start Windows normally

    The two options to return to the same screen.

    I tried the menu under the F keys, but all options listed do not seem to do anything.  I talked to Dell who ran a diagnostic test on the portable equipment and everything was ok.  They wanted then £70 the issue above which I am unhappy that have not had the laptop for a year yet!

    I would be very grateful if you could help!

    Thank you

    Mark

    Hello mtb123,

    1. have you tried the steps suggested by Srinivas R in the previous post to make a startup on your computer repair using the Windows installation disc?

    2. you remember what changes you made to the computer before you start this error?

    I suggest that you access the system recovery options using a Windows Vista installation disc and do a startup repair and if this fails, you can do a restore of the system from the Windows recovery environment.

    You can see the previous post of Srinivas R to verify the information on the system restore.

    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Laptop does not start upward, Windows error recovery

    Hello, my laptop has blocked start correctly.

    It all started when I was using the laptop as usual and the battery disconnected, I didn't notice right away until I removed the charger and the phone is dead, because then the laptop does not start with the dough connected and the charger,

    I use Windows 7 when I boot up I got to Windows error recovery that takes me so into the Startup Repair which is nothing, I tried system restore but it won't let me past picking of a restore point.

    I have I have the laptop currently in safe mode hoping that would allow me to restore the system, but it has not, please someone can he help because it is a work laptop and I need to use it this weekend

    Thank you, Josh

    Hello

    Thank you for visiting Microsoft Community.

    According to the description of the problem you are facing problems with your Windows 7 computer. The question might be if there is a file system corruption. Then I suggest you to perform auto repair. For the execution of the task, I suggest you to try the steps below and see if it helps.

    Method 1:

    When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

    Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair.

    If you are using Windows 7 then the link provided below might help you to download and create installation media.

    Download Windows 7 Disk Images (ISO files)

    Method 2

    Try to rebuild the BCD by using the Bootrec.exe tool.

    To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

    1. Place the Windows 7 installation disc in the disc drive, and then start the computer.

    2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

    3. Click repair your computer.

    4. Click the operating system you want to repair, and then click Next.

    5. In the System Recovery Options dialog box, click command prompt.

    6. Type Bootrec.exe, and then press ENTER.

    See the following link for more information:

    How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

    http://support.Microsoft.com/kb/927392

    Hope this information helps.

    Meet us with the State of the question.

    Sincerely,

    Ankit Rajput

  • Windows Vista will not start just goes to windows error recovery

    I have owned my computer a year and a half and had a lot of problems with it. I had 3 replaced hards and a motherboard.  my computer is turned off, then back on error windows approached and evry time I click an option, the computer shuts down then restarts his return to windows error recovery. I tried to put the recovery disk in, but it does nothing I also tried windows made it sit and tried the disk that is supposed to find the r but nothing will work. all of the suggestions.


    Recovery mode f11 does not work as well

    even in f8 f10 if I push the options it just stops and returns to the menu of this same

    I think that it is high time they gave you another to replace this one!

    You had such a race of bad luck, it would be more advantageous for them replace then keep "fixing" for you.

    Good luck with them and thank you for the reply.

    See you soon. Mick Murphy - Microsoft partner

  • Windows error recovery, "load failed with error 1009 (STHIVE #0).

    Hello world

    This problem occurred to me yesterday. When I started windows, there is here a dialog box saying "Windows Error Recovery" and below, is

    "Unable to start Windows. A recent hardware or software change might be the cause. "(I don't remember changing anything)

    "If windows files have been damaged or misconfigured, startup can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »

    There are two options it saying

    -Launch Startup Repair tool

    -Start Windows normally

    When I clicked on start Windows normally, seems that Microsoft Corporation loading bar never ends

    When I clicked launch a startup repair... A box named "Startup Repair" appeared, saying "Startup Repair is checking your system for problems..." "But after that, it seems that nothing had changed. When I opened my laptop once again, he went to the dialog box saying "Windows Error Recovery" again.

    What should I do now?

    My laptop is "Compaq Presario V3500"

    Also, I see that this tread on Compaq.com http://support.hp.com/us-en/document/c01612373 is it safe to do? I ' ts ok for me to lose all my files just to repair this laptop...

  • Equium P300-16 t - Windows error recovery screen

    It started with not to connect to the internet and to say that something did not launch. I looked on the forum and he said press F8 chose the first option (to fix your computer), I did.

    Then he took me to a with option 2 windows error recovery
    -Launch Startup Repair (when press screen becomes black for 1 second, then goes back to the same screen)
    -Start windown normally (when press turns the computer on and back on bringing me back to the same screen)

    Now when I turn it on charges it takes me to the windows error recovery screen. And no matter what I push on I always end there.

    Hope someone can be useful

    Hello

    Looks like something was wrong with the recovery process and now Windows may start t. Maybe something messed with the registry or a few important Windows files, so I think that the only option to get rid of it using the Toshiba recovery disc. It will wipe the entire HARD disk and restore the factory settings, normally it should work.

    Just so enter the Toshiba Recovery disk and follow the instructions on the screen. Windows will be reinstalled, and you get back to factory settings. :)

  • Re: Satellite A500 - Windows error recovery

    I have a problem with my laptop

    When I restart my laptop, it tends to be stuck on this windows error recovery screen. It gives me two options
    (1) Lauch Startup Repair
    (2) start Windows normally

    Tried both, it turns off, reboots that it ends on the same screen over and over again. Tried to access it via safe mode, nothing helps. tried to fix it through windows disk 7, did not work. tried last good configuration, not good either.

    It's the screen that I always end up and it does not go further.
    http://I585.Photobucket.com/albums/ss297/fobssquad/P1010014.jpg

    Please can someone show me a few guidelines as to how can I do to fix this problem. I'm a freshman in College, I have no money to take it to a professional. That's why I try to fix it myself as I have urgent need.

    Thank you in advance.

    Hello

    Hmm, not easy, but in my opinion it s something wrong with properly installed Windows OS and HDD recovery doesn't work

    You have the Toshiba Recovery disk?
    If Yes, you can use it to restore the original settings windows. Just boot from that disk and follow the instructions on the screen, everything that s! :)

  • Question - loop on Satellite L350-170 Windows error recovery

    Toshiba Satellite L350-170 - Intel Pentium Dual Core T3200 2.00 GHz, 2 GB, 250 GB, 17 "TFT, DVDSM, VHP

    My wife bought three weeks ago. Use of the lamp. Everything works fine, until a dialogue of "Startup Repair" appeared. Since then, the machine starts.

    Machine goes into "Windows Error Recovery" immediately after the Toshiba start screen and has the following options;
    (1) run the Startup Repair tool
    (2) start Windows normally

    Option 2 results in a blank screen and finally goes back to the screen "Windows Error Recovery".

    Option 1 has the reboot dialog box;

    "Your computer was unable to start.
    Startup Repair is checking your system for problems... »

    At this point, the Toshiba laptop enters an endless loop.

    So what I do now? There is no disc came with the laptop, so I can't reinstall the operating system. The dealer (Comet) is less useful and don't know no refund or Exchange for a defective product.

    Can someone please!

    Try this:

    Press F8 immediately after that the laptop has been turned on.
    Then choose the first option called fix my computer.
    Then a new window should open and there you can choose the option called Toshiba recovery.

    Please note then this procedure would start the Toshiba HDD recovery and the BONE to relocate again. This would be to format the whole HARD drive and set the OS to the factory settings.

    In my eyes, you can use this procedure for recovery of HARD drive, or you can try to reinstall the OS using the Toshiba recovery disc.
    Both lead to the same results

    Good bye

  • When I turn on my blue screen laptop appear after windows error recovery windows also appear

    When I turn on my laptop, a blue screen appears after windows error recovery windows appear also... ask in safe mode are normal windows startup?... what I can do... is a problem on my system?... Please help me...

    Hello

    ·         What operating system is installed on the computer?

    ·         What are the error messages that are displayed on the blue screen?

    ·         Did you make any changes before the show?

    In the recovery menu, select Safe mode and check if you can connect?

    You can also try to restore the system in safe mode.

    If you are able to boot to the desktop in safe mode, then I suggest you put the computer to boot in safe mode and check if it helps:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Reference: resolution in Windows 7 stop errors (blue screen)

  • PC happens in windows error recovery

    I looked for further discussions but not find answers for help. PC is windows error recovery message. I was able to boot in safe mode and then tried a system restore. Once ran that I found myself with an empty screen, it restarted and went immediately to the same error message. Now an option if safe mode or normal.it appears.to.start booting.and then just be going empty screen or error message. I do not have the original vista disc and do not have access to one. Any other suggestions?

    If you have problems locking it with the disk, let us know.

    You can make a tool of startup repair, System Restore, etc from a disk of Vista from Microsoft:

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    But to do a repair upgrade installation, Vista runs in Normal Mode not Safe Mode.

    See you soon.

  • Windows error recovery vista

    I have an Acer Aspire 6929g with Vista.

    Last night I turned on my laptop and I forgot about it, it was not plugged in then the battery is dead.
    Today, I turned it on and windows error recovery is there.
    I tried to launch launch repair but also to start windows normally. Both options present some loading screens and then resumed on windows error reappears.
    I followed another forum and typed F8 to access the menu restart to safe mode options.
    I tried all the safe mode and a few other options on this screen, but I finally get back to windows error recovery.
    I have not all disks to restart.
    Any other suggestions?
    The laptop is 3 years old.

    Hello

    With an Acer you would normally press Alt + F10 to start recovery to factory settings process, if no disk came with it for purchase.

    And a password for this process, it is normally of six zeros.

    Be warned; all data will be lost when reinstalling.

    See you soon.

  • computer keeps coming back to Windows Error Recovery

    Original title: my computer will not exceed Windows Error Recovery, it just goes back to the same page

    I have a Dell Inspiron 531, Windows Vista, it was closed and when it is restarted it went to Windows error recovery. If I select start windows normally or start the repair, it cancels the same screen.

    Hello

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  • Stuck in the loop "Windows Error Recovery".

    Whenever I turn on my Gateway laptop, I get "Windows Error Recovery" screen.  Any choice I chose, I only end up return to this screen.  On the advice of a professional, I dug my recovery dvd (created using my computer laptop shortly after purchase) and tried to use it.  I tried different ways to use the restore disc but cannot find one that works (by pressing 'R', F8, F12, F10, Alt F10).  I know I must be missing something... How to use the restore disc?

    Thanks for your help!

    KZ

    Hello

    boot you from it

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    change the boot order it do dvd drive 1 in trunk thern and order to boot from the recovery disc

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  • Windows error recovery received CONSTANTLY after closing the lid

    I did a factory reset using the recovery a month ago discs.  When I was using the system at this time as I closed the lid.  When I came back to it at a later date, I opened the lid and noticed that it was not on.  I pressed the power button and received the following message is displayed:

    Windows error recovery

    Windows is not shut down successfully.  If it was because of the system does not, or if the system was stopped down to protect data, you might be ale to recover by choosing one of the Safe Mode configurations from the menu below:

    (Use the arrows to select your choice.)

    Safe mode
    Safe mode with networking
    Safe mode with command prompt

    Start Windows normally

    What is the problem and how can I fix this so it doesn't happen or is this normal with Vista.

    Hi SouthernDixieCowgirl,

    This would happen if the driver graphics card on the computer is damaged or needs to be updated.

    You will need to update the drivers to display on the computer card by visiting the manufacturer of the card or the computer manufacturer's website and check if it works.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

     

    Also, make sure that you install drivers chipset update by contacting the manufacturer of the computer.

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • get windows error recovery

    Hello

    RE inspiron 1525. I get a Windows error recovery I give myself 2 launch repair options or start normally, both take back you to the same pageWindows on error. I've rebooted using f8 to advance options and tried safe mode, without failure, computer repair, last good configuration mode networking any return readers Windows Error Recovery. I'm really lost here. Much info on disc and no backup and I know always back up your files, but we are here. is it possible to restore from last point by using the instillation cd?

    Please notify

    Don

    Hi Cyborg4848,
     
    I recommend you to restore system using a Windows vista DVD.
     
    Here's how:
     
    To open the System Recovery Options menu using a system repair disc or a Windows vista installation disc
    If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it by using Windows vista installation or a repair system created disc drive previously.
     
    To use this method, you need to restart (boot) your computer using the disk.
     
    a. Insert the disc.
    b. restart your computer using the power button on the computer.
    c. If prompted, press any key to start Windows from the installation disc.
    d. If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
    f. choose your language settings, and then click Next.
    g. If you use the Windows installation disc, click on repair your computer.
    h. Select the Windows installation you want to repair, and then click Next.
    i. in the System Recovery Options menu, click a tool to open, and then choose the system restore and check.
     
    Reference:
     

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Satellite L300 - unable to get a wireless Internet connection

    EY you have some questions, Funny, is that I have my laptop 4 on lets say half a year. I had problems with my wireless connection, I tried 2 fix it, but really never been stable. But now I had a problem I've ever had before, can't get no Internet con

  • Timing of a case structure

    I have a push button with mechanical action value until the release (to give ONE Boolean pulse for 1 second). I want to know a way to make the structure of case remains active for a specified period after that the button turns off.Thanks in advance.

  • LabVIEW control LCD by PC parallel port

    Hello world! I'm a beginner and I have a project, control the parallel port on LCD 16 x 2 thought. I wrote a program (not yet order RS and RW E wirtten). Would you please see, is it right or wrong? And could help me to complete it or which could sent

  • can I combine flv files using vlc

    Can I combine a few .flv using vlc player? If so would like to know the steps.

  • Impossible to uninstall Java

    Java