Windows stops working when you try to use Windows Search

Original title : stop windows

When I try to use windows search, windows stops always working.

Hello

The search Index may be corrupted. If so, you can rebuild, and then try again.

"Reconstruction of the Index in Windows Vista"

http://www.howtogeek.com/HOWTO/Windows-Vista/rebuilding-the-search-index-in-Windows-Vista/

See you soon.

Tags: Windows

Similar Questions

  • My windows Explorer stops working when I try to use the file menu on a file.

    My windows Explorer stops working when I try to use the file menu on a file. If a file is selected in a folder that windows Explorer will be display Windows Explorer has stopped working the message box. This occurs only if a file is already selected and you click on the file option in the menu bar. All the other menu items work well if a file is selected or not, and if no file is selected the menu file works fine. I already ran SFC/scannow from the command prompt, but it returns no violation.

    Hello

    Thanks for posting your question in the Microsoft community forum!

    I understand that you are having problems with Windows Explorer. I'll help you solve the problem. To be able to understand the question in a better way, I would like to ask you a few questions.

    (1) did you make any changes before the show?

    (2) how often does the problem occur?

    Method 1:

    Step 1: You can check if the same problem occurs in safe mode.

    Please follow the link on how to start the computer in SafeMode below.

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2: Perform a clean boot.

    Put your boot system helps determine if third-party applications or startup items are causing the problem.

    How to set up Windows 7 to start in a "clean boot" State

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    See also:

    Error: Windows Explorer has stopped working

    http://support.Microsoft.com/kb/2694911

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Note: Choose a date before that the problem occurred as your restore point while performing a system restore.

    WARNING: Perform a restore of the system can change your settings and delete your unsaved data. Do it at your own discretion.

    Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.

  • The Setup program stops working when you try to uninstall the installer of qwest

    the Setup program stops working when you try to uninstall the software

    the Setup program stops working when you try to uninstall the software

    Hello

    Try uninstaling with revo uninstaller (download the trial for the link.)

    link

    Use the advanced uninstall, method, delete the associated files and reg keys.

    Good luck

    Chyavan

  • Driver.exe has stopped working when you try to play Driver.San Francisco.

    I get the message DRIVER. EXE. Haven't STOPPED WORKING, when I try to play the game, Driver.San Francisco on my computer. Windows 7

    Hello

    1. what game do you play?

    2. have you made any changes to the computer?

    3. this problem occurs only with the particular game?

    4. What is the exact error message you received?

    Method 1:

    I suggest you perform the clean boot and check.

    Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    I suggest you to see link and check.

    "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista

    http://support.Microsoft.com/kb/2665946

    See also:

    If the problem is related to Microsoft, I suggest you to see link and check.

    Game hangs or quits unexpectedly

    http://support.Microsoft.com/kb/303032

  • Windows Movie Maker 6.0 Vista immediately stops working when you try to open.

    Hello!

    I've been all around the internet trying to solve this problem, but nothing has worked so far.  When I try to start Windows Movie Maker 6.0 for Vista, (in general), it stops working at their opening saying the following:

    "Windows Movie Maker has stopped working".

    There has been a few times when it actually opens and I can work on my videos, however, it's very, very, rare and seems to happen randomly.

    I tried to open in safe mode, but it still fails to open.  I also tried to open .avi short and simple with WMM 6.0 files to see if it will be open, but that, generally, does not either.

    Once, I was able to open random and I have disabled all the filters on the Compatibility tab and temporarily activated only video filters that I needed.  That seemed to fix the problem for several days, and I could open Movie Maker 6.0 several times.  Sometimes it would freeze everything and save, or stop working when importing video files, but at least it would be open.  I was able to record some videos.  After a few days, my computer day and WMM 6.0 is more open more.  I don't know if yes or no update is the reason why Movie Maker 6.0 started crashing again, but it was the only thing that has changed on my computer while I could uncheck the Compatibility tab filters and open WMM 6.0. [Could uncheck all filters to be part of the problem?]

    I usually works with .mov files, and I read on how this type of file sometimes causes problems with Windows Movie Maker.  However, the problem normally occurs when I try to open the program (and if WMM opens, I can very well change .mov files).  I do not think that the file type is causing the crash, but I guess that's always a possibility...

    I also read that sometimes Windows Movie Maker 6.0 for vista doesn't work with all computers that have vista installed, and Windows Movie Maker 2.6 must be used to place.  Windows Movie Maker 2.6 is working fine on my computer, but it cannot change the .mov files, or record in HD.  I had horribly degrading the quality of the video with the conversions of files to use WMM 2.6.  Windows Movie Maker 6.0 is much better, on the rare occasions that it works.  Do you think I should use Windows Movie Maker 2.6 now?

    Here are two problem reports that appear more often when you try to open Windows Movie maker 6.0.  The window of support almost always said I need to update my computer again (even if there is no new update), or that it is a problem of security Data Execution Prevention.  Windows Movie Maker cannot be added to the list of exceptions to Data Execution Prevention, or I can check to see if the filters from the Compatibility tab are always disabled in the program, I don't know how to solve this problem...

    -----------------------------------------------------------------

    Signature of the problem
    Problem event name: BEX
    Application name: MOVIEMK.exe
    Application version: 6.0.6001.18341
    Application timestamp: 4ad5c77d
    Fault Module name: StackHash_6f96
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception offset: 0378415b
    Exception code: c0000005
    Exception data: 00000008
    The system version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033
    Additional information 1: 6f96
    More information 2: 39ee662180b2f2ed5cfc67e5914ae855
    Information additional 3:6366
    Additional information 4: 8328a225406b340b1b7b5f591aa5688c

    Additional information about the problem
    Bucket ID: 1197617492

    -----------------------------------------------------------------

    Signature of the problem
    Problem event name: APPCRASH
    Application name: MOVIEMK.exe
    Application version: 6.0.6001.18341
    Application timestamp: 4ad5c77d
    Fault Module name: StackHash_1703
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception code: c0000005
    Exception offset: 032e41a4
    The system version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033
    Information additional 1:1703
    More information 2: 2264db07e74365624c50317d7b856ae9
    Information additional 3:1344
    Additional information 4: 875fa2ef9d2bdca96466e8af55d1ae6e

    Additional information about the problem
    Bucket ID: 1909412930

    -----------------------------------------------------------------

    The "BEX" error happens much more frequently than the "APPCRASH" error  In addition, I have Windows Vista home premium installed and a 32-bit operating system.  I don't know how to read the problem reports, or if it's all the information you need.  I'm not very good with computers at all the... Any help and ideas would be greatly appreciated!

    Thank you!

    Very often, but not always, Code exception: c0000005 is a permissions access error, so have you tried right-clicking on the MM shortcut or .exe and selecting the option "Run As Administrator"?  Other times a reinstallation of the program crash can fix.  As you can not do with Movie Maker the next best option is to try the System File Checker.

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
    http://support.Microsoft.com/kb/936212/#appliesTo

    Have you tested another user even if you need to create one to do this?

    Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

    See how many unsigned drivers, you have running on your computer.  This article will guide you on the instructions, but all you need to do is type sigverif in start run.

    How to identify unsigned with sigverif utility in Windows Vista drivers
    http://www.WinVistaClub.com/F34.html

    Vista Movie Maker DEP Fix
    http://www.YouTube.com/watch?v=tkpURM4FFt0

    In the fix above which is sometimes, but not always with success, it is suggested to leave it on the AVI decompressor.

    There are a few suggestions that Nero is a problem if you run that at all?

    Windows Movie Maker has stopped working
    http://blog.SteveX.NET/2006/11/Windows-Movie-Maker-has-stopped-working/

    If a piece of software can crash Movie Maker may be other software can do, then try Movie Maker in a clean environment, without other software running.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/default.aspx/KB/929135

    http://www.Google.com/search?q=Movie+Maker+DEP+Vista&RLS=com.Microsoft:-AU & ie = UTF-8 & oe = UTF-8 & startIndex = & startPage = 1

  • Organizer of 11 elements has stopped working when you try to change an album?

    Anyone encountered this?

    The only place where I had the problem is when you try to change an album.  After that it stops working, items 11 just stops.

    Operating system is Windows 7 Ultimate.

    Thank you...

    This problem has been all resolved with many tests - there ended up being a program called RoboForm (password remember program in the taskbar) has been walking on organizing PSE.  I disabled RoboForm and everything worked, he turned back and organizer failed on the Album / Edit.  I did at least a dozen times and each time the results were predictable - Organizer is broken when RoboForm was conducting and organizing worked when RoboForm has been turned off.

    Thank you... Pete

  • Windows Media Player stops working when you try to view some AVI video files.

    I recently updated my computer and this problem developed after the upgrade. I don't know if I'm missing a codec or what.

    On some, but not all AVI video files when I try to view them with Windows Media Player (version 12.07601.17514), I get the following error Message:

    "Windows Media Player has stopped working.

    A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

    I use Windows 7 (64-bit).

    AVI video files causing a problem Windows Media Player are viewable by FinalMediaPlayer.

    I recently updated my computer and this problem developed after the upgrade. I don't know if I'm missing a codec or what.

    On some, but not all AVI video files when I try to view them with Windows Media Player (version 12.07601.17514), I get the following error Message:

    "Windows Media Player has stopped working.

    A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

    I use Windows 7 (64-bit).

    AVI video files causing a problem Windows Media Player are viewable by FinalMediaPlayer.

    ======================================
    No guarantee, but it might be interesting to try to download
    and install the following freeware codec pack:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Multimedia | ADVANCED Codecs for Windows 7 and 8
    http://www.MajorGeeks.com/files/details/Win7codecs.html

    Good luck...
    :

  • SE error message "Windows Explorer has stopped working" when you try to search for document files

    Original title: C:\Windows\Microsoft.NET\Framework64\v2.0.50727

    When I'm looking for my document folders all of a sudden, a window pops up saying: windows Explorer has stopped working, then it restarts my computer, I followed to DW20.exe and my friend told me to try and rename it but for some reason any he used to let me. This is a recurring problem and is extremely frustrating!

    Please help me

    Hello

    Were there any changes (hardware or software) to the computer before the show?

    Perform the steps from the link below and see if it helps.

    Error: Windows Explorer has stopped working

    Note 1 : when you perform the clean boot, then follow step 7 to reset the computer to start as usual after the boot process.

    Note 2: Make a backup of all your data on an external drive before you perform an upgrade in-place, as this could result in loss of data.

    Hope this information helps.

  • installation of Windows services has stopped working when you try to install the software

    Unable to install software.tried cmd method, nothing happens

    Original title: installation of windows services has stopped working

    Hello Mohit,

    Welcome to the Microsoft Community Forums.

    I understand that you have a problem with the Windows Installer service.

    But I would like to know some more information on this issue to help you better.

    (1) what is the full error message?

    (2) what software are you trying to install?

    (3) have you tried to install any other software?

    (4) when you say, "tried cmd method" what exactly mean you?

    In the meantime, please try to follow the following suggestions to solve the problem.

    Method 1: First of all, try to follow the link below to troubleshoot the Windows Installer Service.

    How to fix problems with the Windows service install
    Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.
     

    I hope this helps. Otherwise, feel free write us back and we will be happy to help you.

    Thank you.
  • "Windows host process (Rundll32) has stopped working"-when you try to uninstall/remove programs

    Only, I get this error when I try to uninstall/delete an application from my PC. Running Sfc/scannow and it found nothing wrong. Quick scans of Malwarebytes and MS Essentials is no malicious files, running a full scan of Malwarebytes.
    Please help, I need to uninstall something!
    ---------------------------------------------------------------------
    Windows host process (Rundll32) has stopped working
    Signature of the problem:
    Problem event name: APPCRASH
    Application name: RunDll32.EXE
    Application version: 6.1.7600.16385
    Application timestamp: 4a5bc637
    Fault Module name: StackHash_9629
    Fault Module Version: 6.1.7601.17725
    Timestamp of Module error: 4ec49b8f
    Exception code: c0000374
    Exception offset: 000ce6c3
    OS version: 6.1.7601.2.1.0.768.3
    Locale ID: 2057
    Information additional 1:9629
    More information 2: 9629b7be96a6d05c3ae74dcb4df31847
    Information additional 3:2716
    Additional information 4: 271690c76c60b0182163ae26acc5f429
    Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
    If the online privacy statement is not available, please read our offline privacy statement:
    C:\Windows\system32\en-US\erofflps.txt

    Hello

    Method 1:

    I suggest to set up the computer in a clean boot state, then try to uninstall the software.

    How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

    Method 2:
    If the problem persists, I suggest you try the procedure described in the article and see if it helps.

    How to solve problems when you install or uninstall programs on a Windows computer
    http://support.Microsoft.com/kb/2438651

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • Windows 7 error: "Windows Explorer has stopped working" when you try to connect to network shares.

    I recently installed Windows 7 Ultimate on my laptop - clean, no upgrade. It's in the CARDS and not a copy of the beta version. When I try to connect to a network share, I get an error. "Windows Explorer has stopped working". If I go to start > run and type in \\servername\users, I'm prompted credentials. I enter domainname\administrator, then the password, as soon as I get an error message indicating that "Windows Explorer has stopped working" then by «Windows Explorer restarts...» "and then refreshes the screen. If I open computer > network > Servername, I invite myself again for credentials, but get the same message. The name of username/password combo does not seem to make a difference.

    An additional singularity, I went to control panel > "Backup of your computer", and when I was invited to a network location back up my system, I gave him the same set of location and network credential and the system have been successfully saved to the network drive.

    Press Win Logo key + R, type: fsmgmt.msc

    You see your own actions?

    If so, open the credentials manager in Control Panel and look for an entry like your network logon. Delete who can clear up.

    Messages rating helps other users

    Mark L. Ferguson MS - MVP

  • Family tree stops responding when you try to use it on Windows 8

    Original title: machine family tree 2010

    Now, using Windows 8 (can not get used to it) and installed new FTM 2009 and 2010, there is no chance I can either open one of them
    the one with the names of more than 90000 is NOT opening at all... but a precedent with only 82000 (then lose 8000 names) opens... but will give me a message "has stopped working!
    WHAT should I do... any suggestions?
    Best regards and thank you
    Willemine
    South Africa

    Now, using Windows 8 (can not get used to it) and installed new FTM 2009 and 2010, there is no chance I can either open one of them
    the one with the names of more than 90000 is NOT opening at all... but a precedent with only 82000 (then lose 8000 names) opens... but will give me a message "has stopped working!
    WHAT should I do... any suggestions?
    Best regards and thank you
    Willemine
    South Africa

    Contact the manufacturer of the Family Tree Maker with their product under the operating system you are using.  Likely, given my research superficial, they will suggest that you upgrade to a current version and supported that is made to work under the given operating system.
     
    http://www.familytreemaker.com/products/current

  • Receive error message "MFC Application has stop working" when you try to run a PED Basic on Windows 7

    Original title: I am trying to run a PED Basic on Windows 7, I am not able to access my creations on my hard drive. When I try to open the file, I get a MFC Application has quit job message. Any ideas? __

    Window 7

    1.06 based PED

    Hello photoheiress,

    Check the following:
    1) go to Brother Web site and check you have the latest Windows 7 drivers/software for your Brother model.
    (2) try to run in Compatibility Mode. If your Brother model is compatible with Windows XP, then choose XP or the brother Software was written for any operating system.
    (3) when you install the setup.exe or .msi file, right click and select "run as Administrator".

    If please reply back and let us know if none of the suggestions helped solve your problem.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Why IE stops working when you try to download a flie?

    I try to download anything, IE stops working and closes.

    Hello

    You can try resetting Internet Explorer as follows: be aware that this will remove bookmarks and saved passwords etc

    Open windows control panel, open Internet Options, click the Advanced tab, and then click the reset button.  Click 'Yes' or 'Ok' for all additional guests needed to complete the process.

    Kind regards

    DP - K

  • SE charger of HEALTH professionals has stopped working when you try to install a game.

    I have a Loader of HEALTH professionals has stopped working while he was trying to install some treasures from the deep by Oberon Games.  I searched and found others have had the same problem with this error message.  I found help for Vista users, but there is nothing for the support for Windows 7 users.

    I am running Windows 7 Home Premium 64 bit on a B-311 HP 20 Pavilion with 4 GB of ram.  When I first had this system, I had 8 Home Premium 64-bit Windows installed on it and the game installed without any problems.

    Here are the details of the error message I get:

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: Start_Here.exe
    Application version: 2.0.1.4712
    Application timestamp: 4402d 429
    Fault Module name: Start_Here.exe
    Fault Module Version: 2.0.1.4712
    Fault Module Timestamp: 4402d 429
    Exception code: c0000005
    Exception offset: 00003045
    OS version: 6.1.7601.2.1.0.768.3
    Locale ID: 1033
    Additional information 1: 79ee
    More information 2: 79ee8ce1c976216026f008da08a6a3a9
    Additional information 3: c6a2
    Additional information 4: c6a28a6a42863f9b270bcf8e85f99d62

    Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    If the online privacy statement is not available, please read our offline privacy statement:
    C:\Windows\system32\en-US\erofflps.txt

    I tried even to run the installation with Windows XP SP2 compatible mode set up option and you still get the same error message.

    chk if the game is compatible from this link

    http://www.Microsoft.com/en-in/Windows/compatibility/error/index

    If not install it in compatibility mode and click on the link for more information.

    http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

    If you still have problems with the game contact he is a developer or ask their support for more info...

Maybe you are looking for