Windows system error message

Similar Questions

• Windows system error: there is an IP address conflict with another system with the network. How do I remove this error message?

  I just installed a new internet provider and all of my connections are working fine, but I constantly get this "Windows system error: there is an IP address conflict with another system with the network." I have my electrician of the internet modem connected to my office. I have also two wireless devices connected to the appearance of the Modem wireless. I constantly get this error message mentioned above, and I want to get rid of it.

  This means that all that he says.  Your Windows system has an address that already exists on your local network.  Turn your system off and use a working system to locate this address and to which unit he belongs.  In most LANs, the router's DHCP server.  You may be able to ask the router which addresses are used and see what device uses this address, but I suspect not.

  Duplicate addresses can occur when two systems received the same address manually, or when we got an address in the DHCP of the router range. It is unclear when this happened because he is not in control of the address and puts the address duplicate to a second system.  You need to track down, ensuring that all addresses manually asigned are out of the DHCP range, that you book the address of the router, if you want the device to use this address, or configure all devices to request the address of the router using DHCP.

• Satellite A30: system32\config\system error message

  Hello

  I have a Satellite A30 and when I start it it displays the system32\config\system error message

  He also says I can try to repair it by starting the original windows using the installation CD installation program.

  Problem is that I don't have any CD or recovery discs that I bought the laptop on ebay 2 years ago

  While the options of do I have that I don't really want to spend the money, put it in repair... the credit crunch and all that!

  Thank you

  Hello

  Hmm I doubt that you can solve this problem without going through any system windows disk or recovery disk.
  It seems that the installed OS is messed up and you last chance would be a new installation of the OS on the MS Windows CD or Toshiba recovery disc.

  Good bye

• Windows system error: a duplicate name exists on the network.

  I get an error message from windows at initial startup. The message is "Windows system error: a duplciate name exists on the network." How can I fix this?

  What version of Windows, including the service pack is installed?

  After the error, can you use the computer to access the Internet?

  You have a home network (i.e. more than one computer sharing an Internet connection) or this error pops up on a computer used in a business/company/Office?

  Assuming that there is a situation of home, what has changed recently in what concerns other devices (computer, printers, game boxes, etc.) added to the mix?

  How this computer is connected to the Internet?

  Make a right click my computer and select Properties.  Then click on the "Computer name" tab  The 'full name' should not be the same as the name of "workgroup".

  The error is a complaint that another device on any network to which your computer is connected to has the same name that the 'full name' shown in system properties (I assume that it is also possible that the error reports that there are two devices on the network with the same name even if none of these devices your computer).

  Although there are utilities that scan your network and to report the names of connected devices, they are somewhat nonsimple to use and may not work on a computer that will expose the error that report you.

  If your computer is on a home network, share an Internet connection using a router, you can manually check all other devices.  You don't maybe not easily able to determine the 'computer name' no computer network devices, but it is highly unlikely that such a device, for example, a network printer, would have the same name as your computer.

  Just to be sure there isn't something special going, disconnect your computer from your network (or your Internet connection) and then it reboot.  The duplicate name error should NOT appear if the computer is not connected to a network.

• Windows - system error. There is an IP address conflict with another system on the network.

  Windows - system error. There is an IP address conflict with another system on the network.

  This message indicates a problem with the assignment of IP addresses on a home network.  Restarting the computer should fix.  If you have a broadband router, restart the router, too. Boulder computer Maven
  Most Microsoft Valuable Professional

• Start Windows XP error message: "error loading C:\WINDOWS\INODEN.dll".

  original title: Windows XP error message at startup

  When you start Windows XP, I get the error message

  "Error loading C:\WINDOWS\INODEN.dll

  The specified module could not be found "."

  How can I fix this to avoid dll error message that it appearing?

  the dll is likely because there is a start-up or a service that always calls for her but this dll is no longer on disk.

  You must understand, what parent program has this dll to the child.

  Locate the parent service and or start parent program via msconfig, then turn it off.

  as to why the dll could not be found - it might have been zapped by your anti viral or you have uninstalled a poorly written program and he left an entry of orhpaned inland startup Control Panel, for example msconfig.   (by the way, may have orphaned registry keys too.  but that's another issue)

  in any case, to review entries in msconfig, click on start > run > msconfig

  before changing the msconfig, first mark a restore that can help point to reverse all the mistakes you made by accident.

• Windows live error messaging. 800ccc0e

  using Vista, AVG 2011, email yahoo - all updates

  Download windows live error messaging. 800ccc0e

  same error whether you use Windows or AVG firewall

  SMPT, port 25 secure SSL:; Yes

  socket error: 10060

  Those who are not the correct settings,

  Set up your Yahoo! Mail e-mail account in Windows Live Mail
  http://www.freeemailtutorials.com/windowsLiveMail/setupEmailAccounts/setupYahooMailAccount.htm

  Yahoo! Mail more
  http://Overview.mail.Yahoo.com/enhancements/mailplus

  If you need further assistance, please ask in this forum, not here.

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• C:\Windows 32\spool\DRIVERS\W32x86\3\DLCJtime system error message

  Hello

  I am running windows xp professional and just recently, I received this error message when I log: error in C:\Windows System 32\spool\DRIVERS\W32X86\3\DLCJtime.dll\Missing entry: RunDLLEntry. It doesn't seem to affect anything but what should I do to get rid of this?

  Thanks for any help

  Hello, please not that this is a support forum for questions about the browser firefox web. We are not qualified to solve errors appearing when you start Windows - instead, please visit a support like this forum: http://answers.microsoft.com/en-us/wi.../871601b5-9297-478e-b974-44790a5bb06b

• Win XP with Windows\system32\config\system error message unable to restart in any mode.

  I have a desktop computer Acer, about 4 years old, running Windows XP SP2. When I started my computer, it does not boot in any mode, and I get this error message:

  Windows has not start because the following file is missing or damaged:
  \windows\system32\config\system
  You can attempt to repair this file by starting windows setup using the original setup cd-rom
  Select 'r' in the first screen to start repair.

  I don't have a Setup disk and wonder if it would help in all cases. Any ideas?
  You can not download configuration online info. I have a second XP computer which is supposed to have access to the configuration file in the Add/Remove Programs section, but I don't have any tab to create a disk for installation here. Do you know where he's hiding on this computer? If not, can I get a copy of this MS installation disc?
  Thank you

  Thank you

  Manual steps to recover a corrupted registry that prevents the start of the procedure that this article describes to Windows XP using System Restore and Recovery Console. This article lists also all required specific steps to ensure that the process is fully completed. When you have completed this procedure, the system returns to a state very close to the State until the problem occurred. If you have ever run NTBackup and completed a system state backup, you don't have to follow the procedures in parts two and three. You can go to part IV. First part in the first part, you start the Recovery Console, create a temporary folder, back up the existing registry files to a new location, delete the registry from their existing location files and then copy the registry files in the repair folder to the System32\Config folder. When you have completed this procedure, a registry is created that you can use to start Windows XP. This registry was created and saved during the initial setup of Windows XP. Therefore, any changes and settings that took place after Setup has finished are lost.

  The full, first part, follow these steps:

  1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
     Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
  2. When the "Welcome" screen appears, press R to start the Recovery Console.
  3. If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
  4. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
  5. At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
     MD tmp
     copy c:\windows\system32\config\system c:\windows\tmp\system.bak
     copy c:\windows\system32\config\software c:\windows\tmp\software.bak
     Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
     copy c:\windows\system32\config\security c:\windows\tmp\security.bak
     copy c:\windows\system32\config\default c:\windows\tmp\default.bak

     delete c:\windows\system32\config\system
     delete c:\windows\system32\config\software
     Delete c:\windows\system32\config\sam
     delete c:\windows\system32\config\security
     Delete c:\windows\system32\config\default

     Copy c:\windows\repair\system c:\windows\system32\config\system
     copy c:\windows\repair\software c:\windows\system32\config\software
     copy c:\windows\repair\sam c:\windows\system32\config\sam
     Copy c:\windows\repair\security c:\windows\system32\config\security
     Copy c:\windows\repair\default c:\windows\system32\config\default

  6. Type exit to quit the Recovery Console. Your computer will restart.

  Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

  If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:

  batch regcopy1.txt

  With the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use the batch command, you do not have to manually type as many commands. Second part to perform the procedure described in this section, you must be logged on as an administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.

  Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.

  1. Click Start , click shut down (or click turn off computer ), click restart , and then click OK (or click restart ).
  2. Press the F8 key.

     On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.

  3. Use the arrow keys to select the appropriate safe mode option and press ENTER.
  4. If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

  In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:

  1. Start Windows Explorer.
  2. On the Tools menu, click folder options .
  3. Click the view tab.
  4. Under hidden files and folders , select Show hidden folders and files , and then click to clear the Hide protected (recommended) operating system files check box.
  5. When appears in the dialog box confirming that you want to display these files, click Yes .
  6. Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
  7. Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.

     Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.

     Note You may receive the following error message:

  C:\System Volume Information is not accessible. Access is denied.

  If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:

  309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder
• Open a folder that was created not at the present time. You may need to click Details on the view menu to see when these folders were created. There may be one or more folders starting with "RPx under this folder. Here are the restore points.
• Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:
  C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
• Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
  • _REGISTRY_USER_. DEFAULT
  • _REGISTRY_MACHINE_SECURITY
  • _REGISTRY_MACHINE_SOFTWARE
  • _REGISTRY_MACHINE_SYSTEM
  • _REGISTRY_MACHINE_SAM
• Rename the files in the C:\Windows\Tmp folder as follows:
  • Rename _REGISTRY_USER_. DEFAULT DEFAULT
  • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
  • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
  • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
  • Rename _REGISTRY_MACHINE_SAM to SAM

These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.

The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.

The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.

Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:

309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder

Part three in the third part, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:

1. Start the Recovery Console.
2. At the command prompt, type the following lines, pressing ENTER after you type each line:
   del c:\windows\system32\config\sam

   del c:\windows\system32\config\security

   del c:\windows\system32\config\software

   del c:\windows\system32\config\default

   del c:\windows\system32\config\system

   copy c:\windows\tmp\software c:\windows\system32\config\software

   copy c:\windows\tmp\system c:\windows\system32\config\system

   copy c:\windows\tmp\sam c:\windows\system32\config\sam

   Copy c:\windows\tmp\security c:\windows\system32\config\security

   Copy c:\windows\tmp\default c:\windows\system32\config\default

Note Some of these command lines may be wrapped for readability.

• Type exit to quit the Recovery Console. Restart the computer.

Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:

regcopy2.txt batch

Fourth part

1. Click Start and then click all programs .
2. Click on Accessories , then System Tools .
3. Click System Restore , and then click restore to a previous RestorePoint .

Good luck! Please rate me upward if you find my post helpful. Thank you!

• ink system error message Oxc19a0035 failed. Unable to copy, receive faxes or print

  When I receive the error message above, I can't turn off the printer, then back on, and it will work a few times, then the above message comes back.

  Hello

  1. is this a problem particular application or with all printing applications?

  2. which version of the Windows operating system is installed on the computer?

  3. What is the brand and model of your computer and the printer?

  4 did you change on your computer before this problem?

  Follow the suggestions and then check out.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this helps and provide us more information if you need more assistance.

• Windows XP SP3 Gets the Windows Update error message: '0x8024D007.

  Current system under Windows XP SP3 Gets the error message "0x8024D007" from Windows Update.  I tried methods 1 and 2 described in the Article 956701 but the same error occurs.  Also used REGSVR32 /u to unregister the WUPS2. DLL (mod date 2008-10-16), rename WUPS2. DLL to WUPS2. DLL.old, then copy WUPS2. DLL (mod date 06/08/2009) of a system of SP3 to update and record; This also fails with the error message "0x8024D007.

  Question: Can SP3 be removed and reinstalled without affecting existing applications that may have been installed under SP3?  I ordered SP3 on CD and that you plan to use it to reinstall.

  When you have access to the computer, your list includes:

  1. ask your son if IE7 had been installed before he did the repair facility a few years; and if that were the case, it uninstall IE7 before proceeding with the repair facility?

  2. see if a reset fixes the problem; CF. http://support.microsoft.com/kb/971058

  Tip: Access KB971058 via Internet Explorer, not any other browser and run the difficulty in there by default and aggressive modes, if necessary.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• KB954430 continues to appear in Windows Update, Error Message for lack of Log File during manual re - install

  I followed several other discussions about the inability to install this update, but I succumbed.

  My problem started when I did a system restore to solve a problem with a newly installed program.

  Under update history, windows update is of the opinion that this update has been successfully installed several times.

  The 954430.log log file is not present in my windows directory.

  The update is not present in the list of installed updates.

  I moved msxml4.dll and msxml4r.dll in the system32 directory.  When I try to reinstall KB954430 manually, the following error message is received: "error opening installation log file.  Verify that the specified log file location exists and is writable. »

  Thanks in advance for your help.

  Thanks for the attempt to help Umesh P.  Went before your answer.
  Something I've done has solved the problem, if I'm not 100% of the exact solution.

  So, I found some of these random number files that contains kb954430 log files in the home directory of my swap file partition.  I deleted these.

  I tried to reinstall manually, it still gave me the same "log file" error as described in my post above.  Then, I tried to install it via the automatic update service.  Then, he stated that the update was not necessary.  The update kept bugging me on this subject, but finally, after a reboot or two, I noticed he had stopped to ask.
  My computer seems to work now, as far as I know, although I do not have the patch installed in my list of updates, and the msxml dll never came back.  Is there a chance that the patch was never installed and he abandoned?

• During the attempt to re - install the iTunes software, I got the Windows 126 error message. APSDaemon, exe-Unable to locate component. MSVCR.90.dll was not found. Re-installing may fix this problem

  I use Windows XP PRO Sp 3. I tried to open an iTunes download & got this message. "APSDaemon.exe that this application was able to start. Could not locate the component that msvcr.90.dll was not found. Re-installing may fix this problem. "
  All this happened after I tried to install a new update Apple iTunes. He kept saying that he could not install... I tried several different things to solve this problem, including doing a system restore in frustration, for 2 days before today... I tried to update iTunes, not always the case. Help, I'm a no techno, so please do not just refer me to somewhere else, I will never understand what I'm told to do, whenever I am sent somewhere else, I can't solve my problem & give up in frustration. Please can someone take pity on me & guide me through the fix?
  A related problem, I tried to run iTunes from the desktop, but I got was the Mini audio player.
  I just tried to recreate that & got again the error messages, the one listed above main & another one that says "iTunes is not installed correctly. Please re - install. Error 7 (Windows error 126).
  Whenever I try to re - install, I get the error again on the component .dll.
  I hope that's enough info to try & help me. I really need this fix to work as I have many meditations downloaded on iTunes, because Windows Media Player could not open the files.   It would take me hours & hours to find where they came, they were downloaded over 4 years!
  Thank you in advance.
  Sylvia

  If you have not had luck in iTunes (https://discussions.apple.com/community/itunes/itunes_for_windows?view=discussions#/?tagSet=1234) forum, uninstall and reinstall iTunes as described below:

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.  (If you are using Vista, see THIS instead).

  Go to control panel > Add/Remove programs
  Remove these applications in the following order (do not restart your computer if you are prompted during this process):

  1 iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4 Hello
  5 Apple Application Support (iTunes 9 or later)

  6. iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)

  7. iPod Updater

  8 QuickTime

  Open my computer > C: > Program Files
  Delete these files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Follow these steps if the message "cannot delete iPodService.exe: it is used by another person or program" appears when you try to delete the folder of the iPod.

  1. Make sure that you have iTunes and iPod Update utility are not open.
  2. Press Ctrl-Alt-Delete.
  3. Select Start Task Manager.
  4. Click the processes tab.
  5. Locate the iPodService.exe in the list.
  6. IPodService.exe-click and choose end process.
  7. Quit Task Manager.

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  NOTE: If you have trouble uninstalling applications, or if you have a problem, reinstall iTunes because the installer complains that it can not uninstall the current version of iTunes, see the 'Installation issues' section below.

  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

  Installation problems

  There are several tools to deal with problems installing or uninstalling applications.  If you have these problems, the following should help.  Before using one of these tools (including #3), you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  1 Microsoft has a program install and the resolution of the problems of the uninstalling which is supposed to "work better" and be "safer" to use the old Install Cleanup Utility (3 below).

  2. free Revo Uninstaller.  You can also download a trial version of uninstaller Revo's ' Pro', which has a few more aggressive cleaning options, but this should not be necessary.

  3 Microsoft Windows Install Cleanup Utility.  Although this tool has been the preferred tool to deal with the problems of Windows Installer, Microsoft removed from Microsoft download servers because it seems sometimes deleted more than he was supposed to (I believe this was linked to Office uninstall).  You can still get Windows Installer Cleanup here--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html utility

• I need information on windows xp, I can't install Itunes. Has anyone dealt with ituneshelper.exe Itunes must be reinstalled Windows 7 error message? I've tried everything. Help, please!

  I have an ipod shuffle (first-generation) OLD. My system is Windows XP service pack 3. Computer behaving badly. If for any reason I can't install ITUNES without the error message 7 missing Itunes helper.exe need to reinstall Itunes. I tried many methods to address them. I can't use my IPOD or Itunes.  Please someon point me in the right direction. Thank you angella

  Hello

  · Brief us with the steps you tried to solve the problem.

  I see many users ITunes with the same concern. According the apple forums, this error is caused if SQLite3.dll is missing.

  For assistance on the issue I suggest you to post your query in the ITunes forum. Link: https://discussions.apple.com/community/itunes/itunes_for_windows

• System32\secuload is not a valid Windows image error message.

  Whenever I start my PC, I get the following error message. "The request on the DLL C:\\WINDOWS\system32\secuload.dll is not a valid Windows image.  Please check this against your installation diskette. "I usually get 20 or if these and I have to click OK to allow the program to move forward.  No idea how to solve this problem?

  Hello

  ·        When I get this error message every time that you open any program or randomly?

  secuload.dll is a charger of security belonging to Tenebril Security Loader of Tenebril Inc. non-system processes like secuload.dll are created from the software you have installed on your system.

  Method 1:

  If the program loads at startup and then, I suggest you to disable this program from loading during startup. Follow the steps mentioned below.

  ·        Click Start and click Run.

  ·        Type msconfig.exe in the run box, and then press ENTER.

  ·        Click the Startup tab and look for the program.

  ·        Uncheck the box located next to this program and click apply and then click Ok.

  ·        Now, restart the system and check if the problem persists.

  Method 2:

  It is perhaps the application is corrupted. I suggest to uninstall the program and then install it on the system and check if the problem is resolved.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.