Windows system restore 8

Similar Questions

• Insert the active windows system restore CD

  My laptop HP G7000 with the version of windows Vista Edition family gets empty with only a cursor arrow showing after trying to start.

  This problem occurred when I had a power failure when running the system recovery and was able to complete it. The system keeps asking for active windows system restore CDs

  I was able to assess the documents on the hard drive when connected to a system of work

  Can someone help me because I do not have the requested CD

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• Host Windows system restore back up virtual machines the VMWare Workstation?

  Is it save to perform a restore of the system on a Windows host running VMWare Workstation 9.0.2 with the premises of virtual machines? I just need confirmation that the VMs will be still functional after restoring the system.

  Welcome to the community,

  System Restore should not touch all personal documents, what configuration file and virtual disk are in reality. However, a restoration of the system can change the parameters of the application Windows for for example VMware Workstation. Anyway most that should happen is that you have to reinstall VMware Workstation in such a case.

  see "what files changed during a system restore?" at http://windows.microsoft.com/en-us/windows/system-restore-faq

  In any case, it is always useful to have a current backup!

  André

• I need to recover the Favorites after a Windows system restore.

  After doing a restore of windows on Windows 7 Pro, I have only the default bookmarks on my view your bookmarks"" button. In a backup of the system a few months ago, I got the files and folder Appdata Firefox Profiles. I tried to replace the new profiles of 'empty' to the former, but without success - I still have only the default bookmarks. Thanks in advance for your help.

  Note what to do a system restore will probably replace the profiles.ini file and all the profiles that are made after the date of restoration will not appear or be accessible through the Profile Manager.
  
  If profiles are still there, then you can use the Profile Manager to create a new profile and choose the location of an existing profile (choose a folder) of re - save profile.

  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Profile_Manager

• file missing or corrupt XP Windows, system restore disks do not work. Help, like xp, like vista or win 7

  My desktop has windows xp media center edition with Service Pack 3 for years, there work and maybe it's time to junk food, however my laptop has windows vista, which I don't like, I have seen windows 7 and am not fond of him either, so what can I do? When I load the system restore disks that it doesn't load until a certain point where it says it is to copy the files, then tells me that the restore is complete. When to start again, I said the file "\system32\hal.dll ' is corrupted or missing and reinstall... How do I do that?  Thanks for any help.

  SADA

  I'm writing this in case others have had the same problem, I had and it was impossible to restore.

  When I pressed "del" and got the installer, I looked in the first box, product information.

  This info was typed in a field of google search on a working pc, and I discovered that I could restore my pc by pressing the ALT key and pressing F8 repeatedly. It will work for Acer Asprire anyway. Just an idea for all those who were distraught as I was and knew nothing about the restoration or what my pc really was. I was lucky and got my restored xp, it works ok and I enjoy it once more.

  Good luck to all of you who have had the same problem I did.

  Whenever I turn on my pc, I find the time to scan the disk and chjeck to find errors etc, just to try to avoid

  have a pc unstabel again.

  SADA

• Windows vista cannot open network, the Task Manager and the windows system restore.

  I have problems with a computer, I'm trying to fix. It is a Dell Inspiron 1420 with windows vista. Whenever I try to open the networking or system restore, I get a window with a white screen. With this blank screen, it's like the computer is frozen, ctrl alt del, break the gel, but when I try to open the Task Manager, it would not come. Another problem is blocking down. Stop taking too long. (maybe 30 min)   I did research on the internet to find what could cause something like this and a way to solve these problems, but I came empty. Any information or suggestion would be useful.

  Hi Wiseman504,

  -How long have you had this problem?

  -What software changes you did on the computer before the show?

  Follow these steps:

  Method 1:

  Step 1:

  Boot in safe mode with networking and see if the problem persists.

  See options (including safe mode) advanced boot for instructions on how to start in safe mode with network.

  Step 2: If the problem does not occur in safe mode, start your system in a State of clean boot (in normal mode) to solve the problem.

  For instructions, see How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 .

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Optimize Windows Vista for better performance

  Ways to improve your computer's performance

  Method 2:

  Follow these steps:

  Step 1:

  Create a new user account and see if the problem is recurring in the account newly created.

  Step 2:

  If the problem does not persist in the new user account, it could indicate that your old user account is corrupted.

  Follow the steps in the following article to repair the damaged user profile:

  Difficulty of a corrupted user profile

• Once a live windows system restore mail, do not open my emails.

  I did a system restore and now whenever I try to open a message in windows live mail, it says "a problem has occurred." trying to open this message "there was a problem." "please try again."

  However I tried to open the message in windows mail, provided with windows by default and it opens perfectly. While there must be a problem with windows live mail itself. I tried to fix it, but no luck? other options?

  for those who want the truth revealed open their hearts and their secrets unseal right now until the now from now who complete memories for those who are now in this House only truth will be heard from the mouth

  This post please in the Windows Live Mail Forum
  http://www.windowslivehelp.com/forums.aspx?ProductID=15 Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• After that the Windows System Restore does not work

  So I tried at my peak of windows 7 on the eve, but he throws it gives me an error saying "can not find script file c\windows\run.vbs" system restore other than that it was just a black screen with my mouse on it. Any help would be appritiated, thank you.

  You are able to access safe mode?

  If your computer has a single operating system installed, press and hold the F8 key as your computer starts or restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If you access the safe mode, you can follow the procedure described in the following link to undo the restore point:
  http://Windows.Microsoft.com/en-GB/Windows-Vista/undo-system-restore

• How can I increase the recovery of Windows system restore drive 7?

  I have windows 7 ultimate and I read someone's question on the increase in the recovery of the system and I was wondering how to find it on my laptop and desktop? Because if I can and have better if restore points I ever need to go back which would help in the right now with my laptop, that my restore points back only 7 days. Which is weird, this laptop has been used longer than 7 days and I for 2 days.

  And it is the same for windows 7 Home premium? So I could show my father and my brother as well :)
  Thanks Cortana :)

  System Restore saves as many restore points as he shared.  When the allocated space fills, more older restore points are deleted to make room for the new.

  Although SR in Windows 7 is much better than XP, I would always go back much more than a week.  Windows 7 warn you: on the first screen of the system restore, you will notice a link that says "search for affected programs.  Click here to get an idea of what problems might arise if you go ahead with the restoration.

  Also, the list of restore points that shows initially cannot be completed.  Check the box "Show more restore points" to see the rest of them.

  Here's how to adjust the space allocated to the restoration of the system (all Win 7 versions): http://windows.microsoft.com/en-us/windows7/how-much-disk-space-does-system-restore-require

  Here are answers to some common questions about the system restore.

  Remember, the system restore saves its restore points on the same drive that is "protection". If this disc fails, both your system AND your backup disappeared.  Best practice would be to save the backups on an external support.

  If you want to stay with built-in tools, see, for example:
  http://www.PCWorld.com/article/186997/win7_backup.html
  https://WindowsSecrets.com/top-story/build-a-complete-Windows-7-safety-net/

• windows system restore 8 at an earlier date?

  I want to use to restore the system to an earlier date. How do I do that?

  Hello

  In order to restore the system to an earlier date, you must have a system that is created on your system to a previous restore point date. Press the Windows key + W, type System Restore in the search box. Results, click create a restore point. Now in the System Properties window, click on System Restore. Now you should be able to see the system restore point created earlier. So you can restore the system at this point.

  Step-by-step instructions here: http://www.kapilarya.com/configure-and-use-system-restore-in-windows

  Hope this helps, good luck :)

• CreativeCloudSet - Up.exe does not work after Windows system restore

  Hello

  Accidentally fallen Windows Update that broke my system. Was required to make a system restore which deleted all record of my installed applications of cloud creative, even if the files are still physically present.

  Now that I am trying to reinstall creative cloud, I don't see a CreativeCloudSet - Up.exe is 'Initializing install', then it closes and nothing else happens.

  After you run the CS cleanup tool, Creative cloud resembles install (its icon appeared on my desk). However, when you try to run it I get:

  Adobe Creative Cloud has stopped working

  Windows can check online for a solution to the problem.
  

  Signature of the problem:

  Problem event name: BEX

  Application name: creative Cloud.exe

  Application version: 3.0.1.88

  Application timestamp: 554caead

  Fault Module name: StackHash_5861

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception Offset: PCH_2B_FROM_ntdll + 0x0003D72C

  Exception code: c0000005

  Exception data: 00000008

  OS version: 6.3.9600.2.0.0.256.48

  Locale ID: 1044

  Information additional 1:5861

  More information 2: 5861822e1919d7c014bbb064c64908b2

  Additional information 3: bb02

  Additional information 4: bb02c3b29c3f075104f1d0629e885cfc

  Adobe Creative Cloud Tool.log Cleaner: https://gist.github.com/anonymous/1d5b3fec04c8df1ee92d

  uninstall all cc on your computer by using the uninstall programs.

  Run the cleaner use by the cleaning tool CC to resolve installation problems. CC, CS3 - CS6

  then install the application of office cc, https://creative.adobe.com/products/creative-cloud

  Use the desktop application to install your other adobe programs.

• Recently upgraded to the new version of Firefox and after a Windows system restore was performed today Firefox is therefore more accessible (by clicking on icon Firefox results in nothing) what can I do?

  After System Restore Mozilla Firefox icon is still on the screen but now when I click on the Firefox icon does not open. I have a number of bookmarks saved I'd perfer not to lose - is there anyway I can restore Firefox without losing bookmarks?

  Using the system restore can cause your installation of Firefox get corrupted because not all files are restored, so be careful to do a system restore.

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• CC disappeared after the Windows system restore.

  CC desktop .exe file installs. tried all the trouble shooters. including ACCCT.exe

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and before reinstalling is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

• What is the difference between the standard system restore and to advance option IE. Windows and smart only restore to the recovery program? Two of them are my computer to factory settings? Which is better or less annoying?

  I use Window XP Home Edition.

  oureasyphamax,
  I do not know if I understand your question completely, but let me answer what I think that you have requested.

  The Windows System Restore will restore your Windows settings (drivers, registry, etc.) to a previous state (note it does not affect your user data).

  Smart restore or a system restore that is started before Windows starts, usually accessible from disk or a boot partition, an OEM recovery option.  It will usually restore your PC to factory without saving the data, depending on the OEM recovery options.  For assistance with this type of option recovery\restore, you will need to check with the manufacturer of PC.

  If this does not answer your question and then return. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get rid of the fake Virus to restore Windows System

  I became sort of a virus that comes and says that it is called "Windows system restore." It runs fake scans system and said I have several faults on my hard drive and the RAM errors, etc.. He hid a lot of files and shortcuts and does not allow to use my computer. Please offer any help to remove it. I run a full sweep of removing malicious software right now, but I don't know that that will solve registry problems, etc. Help!
  Thank you
  John

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You should also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.