Windows\SYSTEM32\AUTOEXEC. Not suitable for running MS-DOS or Microsoft Windows NT applications
I'm trying to run a 16-bit MS-DOS program and I get get the above message.
I am running XP service pk3
No, I'm running XP 32 bit.
However, I discovered that my AUTOEXEC. NT in my system32 folder was corrupt.
I have repaced it by a new copy and it fixed my problem.
Tags: Windows
Similar Questions
-
Hello
Original title: problem installing the softwareWhen my wife tries to install software (for example the updates of Windows or Itunes) on his Dell laptop (Windows Vista Home Premium), she gets this error developed box."the 16-bit MS-DOS subsystemThe msiexec.exe config.nt file this system is not suitable for running MS-DOS and Microsoft Applications. »Grateful for any ideas on how to fix this problem!Hello
1. what 16-bit or software program you try to run? Should I use the CD Rom drive?
2 - is the question also appear during the installation of Windows updates?
3. have you made changes on the computer before this problem?
Follow the methods and check them out below:
Method 1: Perform a clean boot and check.
To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.Method 2:
Run an analysis of auditor of system files on your computer and check for the issue.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
Hope the above information is helpful.
-
The system file is not suitable for running ms - dos and microsoft windows applications
Hi, this is the error message when I try to install DUNE200 in and an old computer with windows XP.
Is there anything I can do to get his execution please?
Thank youHi eileenjune,
Welcome to the Microsoft Answers community.
This problem may occur if one or both of the following files are missing or corrupted:
1 Config.nt
2 Autoexec.nt
Try the steps below and let me know if this helped.
1. double-click 'My Computer' then your hard drive (probably drive C) and open the folder "WINDOWS".
2. open the folder "repair". Find "autoexec.nt" and "config.nt" in there. Copy these files (Ctrl + C) then go to C:\WINDOWS\SYSTEM32 and paste them there (Ctrl + V). It will ask you if you want to replace the old.
3. click on 'yes '.
4. now check if the problem persists.
For more information visit http://support.microsoft.com/kb/324767hope, this information is useful. \
Let me know if it worked.
Thank you, and in what concerns:
Umesh P - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think. -
my pc has failed to install any antivirus it shows that the system is not appropriate for the execution of ms - back and ms windows application help
Hello
problems to install your anti-virus software, contact the manufacturer of the anti-virus
also scan for Malware
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
When you try to install the template or simple labeler, the following error message is given: "the operating system is not enough for running Lightscribe".
I would be most gratefull if Microsoft would fix Windows 8
See you soon
HK
Hello, HK,
Thanks for posting in the Microsoft Community.
I'm sorry to hear that you are facing problem with the installation of the Lightscribe software in the computer of Windows 8.
Let us try to install the software program in Windows 7 compatibility and control mode; I'm sure this will help you to solve the problem.
To install the software/program in Windows 7 compatibility mode, right-click on the configuration file and click Troubleshot compatibility, and then select Windows 7 and follow the prompt.
Please provide us with more information, so that we could help you to solve the problem.
-
Problem burning DVDs. "Error in device - device target is not suitable for use.
Hi all
Initially, I had many problems with PE8. However, the update of nVidia Driver resolved most of them.
Just thought it was important to note the success, but also failure!
However, one problem remains. I get the following error at the level of the mark of 96% when burning. "Error in device - device target is not suitable for use. It is always the mark of 96% and the program is "[something] compilation" when this happens.
After searching this site I noticed that the user rgferg posted a similar problem 13 days ago has been redirected to repost in a different place, but never did.
I tried to burn a clip 1 hour 4 times and each time I chose the slowest burning speed (8 MB/s), as suggested. It seems that the lower support is a culprit, so I bought some Verbatim DVD media - R [quality] try in my optical drive SATA Phillips. I'm skeptical it will work, but nevertheless open-minded. I'll give it a whirl when my computer has stopped capturing VHS, I train.
Whenever combustion not not the disc was ejected automatically and the burn process actually started and progresses maybe about 40% or more.
That tells me it's a question of sharing, rather than issue a support. Somewhere on this forum, he suggested that I go through a process of 20 stages and remove/disable each piece of software that can compete with the first, among other things. IF I do this what do I burn through the outside of Adobe? What I need imgburn or whatever it was called? What happens if I like Nero? Nero 6 has worked very well for me for 3 years.
So I am ready to uninstall my old optical drive burning software, who out there can recommend commercial software which, for them, creates a painless Adobe burning experience without errors or conflicts? Perhaps there is another solution that I've not seen on this forum?
I am running Windows XP SP3. I have the latest nVidia drivers for my cards SLI GeForce 7600 GS. I have 3 monitors. RAID 0 SATA, 2 GB RAM, Athlon X 2 5400.
Justin.
Since you are apparently able to burn to a folder on your hard drive, but not directly on a DVD, the problem is most likely that another program (Nero, for example) is interfering with communications between Premiere Elements and your DVD burner. This is very common.
Rather than fight with it, the easiest solution is simply to burn your files on your hard drive and then use Nero (or whatever your burner program) to burn the VIDEO_TS folder to a playable disc. This process takes no more time and offers a number of advantages, including the fact that he make several copies of your DVDs very easy.
-
I bought Photoshop and elements of order #AD003212006UK. When I try to download I am informed that the software is not suitable for my system (new iMac, retina) Please help
You are 100% sure that you are clicking to download the Mac version and not the version of Windows?
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===>===> NOTE DAYS AND TIME
Don't forget to stay signed with your Adobe ID before accessing the link belowCreative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.html
-or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html -
Hi, can someone give me some ideas on what type/brand of usb cameras are not suitable for labview? I need to use with labview and image acquisition IMAQCheers vision module
Hi, I use a 1.4MP USB camera with LabView. The brand is ID - a German company.
-
What type of certificates are not suitable for the signature of the extensions to HTML5?
It is not clear to me, of the literature exactly what types of certificate are not suitable for the signature of the CC2014 HTML5 extensions.
I used a Thawte 'Adobe Air' certificate for signing extensions based on Flash. It is now expired. Can I buy the same type and that will work cross-platform for the signature of the extensions to HTML5?
See http://www.thawte.com/code-signing/content-signing-certificates/adobe-air/index.html
Thank you
Hi meeky2,
Required certificates have not changed for HTML5 extensions, so the same type of certificate that you had before work ('Adobe Air' certificates are very good).
Note that if you only distribute your HTML5 extension through modules Adobe / Adobe Exchange, then there is no need to use a paid certificate. If you distribute your extension elsewhere, then you should do the same thing as you did with the extensions of the AIR.
Best regards
Fraser
-
I'm trying to burn a dvd in first elements 8.0 but after 96% iam getting this error:
"device target error - the device is not suitable for use.
I tried all these steps according to this link: http://kb2.Adobe.com/CPS/515/cpsid_51553.html .
System configration:
Win vista 32 bit.
Processor: Amd athlon 64 dual core 2.60 GHz.
RAM: 3 GB
Graphics card: nvidia geforce 6150 is.
Model number of camcorder: JVC gz-hm320.
Format: .mts
Image size: 1920/1080
Frame rate: 29.97.
Please look at this problem.
Concerning
Manoj Khati
Here are the search results for your error: http://forums.adobe.com/search.jspa?q=device+error+target+device+isn%27t+suitable+for+use& resultTypes = MESSAGE & dateRange = all & communityID = 3271 & username = & numResults = 15 & rankBy = 10001
See you soon,.
--
Neale
Insanity is hereditary, get you your children -
What are the optimistic Caches? They are not suitable for OLTP?
where are the optimistic Caches? I think that they are not suitable for OLTP due its implementation without any concurrency control?They are used in situations requiring no concurrency control. For example, session data, transient data, some single-user data and so on.
The use is based primarily on the Types of businesses. -
MX922 paper size is not suitable for double-sided scanning.
Canon MX922. I can scan two-sided 8.5 x 11.0 paper letter-size but slightly smaller size 8.5 x 10.5 doesn't scan two-sided. Message error "the size of the paper is not appropriate for duplex scanning. Is there something I can do to make it work?
Hi a4pilot,
You would not be able to scan double-sided paper 8.5x10.5 format, however, you can make a copy of the document on paper size 8.5 x 11 and then perform scanning two-sided copying.
I hope this helps!
It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.
-
I use his extreme gamer of Sb. Vista guard card install the drivers HD Audio and won't install drivers creative creative. I tried to update and uninstall them but now just creative installation does not recognize the card and windows just re - installs again.
I'm doing something wrong or it's just something I have to live with?
Any help welcome.
See you soon
Shaun
Hello
Windows, update hardware part 3 drivers normally are way behind
the way to get windows updates
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
When you see the problem update just right-click on it and hide it
Next, install your correct driver
-
Any suggestions would be welcome!
See http://support.microsoft.com/kb/931937.
You need Windows Mobile Device Center. -
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hi KevinKat78,1. who is the manufacturer of the video card?2 have you installed utilities display?If you have installed all the utility programs display, then remove them. If there is no utility display installed, we recommend that you cross check if a non-Microsoft program is causing this issue. To do this, try the following steps.
Step 1: Perform the clean boot is disable all non-Microsoft programs
a. open the article: http://support.microsoft.com/kb/929135
b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
c. check to see if the problem persists.
d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
g. Article, follow "step 7: reset the computer to start as usual.Step 2: Check the update of Windows to see if there is any update for your video card
see automatically get recommended drivers and updates for your hardware .
b. Select the good update and install it.
c. once the update is installed, restart the computer for the changes to take effect.Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Replacement for apple pencil Cap
Too, I've lost the magnetic plug in the week of owning the pencil! I looked everywhere but no luck it is. Find clips Sonix Gel stick pen cap fits perfectly - same clicks on. I spent a lot of time trying to find a pen CAP that would be appropriate
-
Slow to open the first time after startup apps
Slow to open the first time after startup apps
-
Satellite A300-1N8 on XP in AHCI - "iaStor" error and gel
Hello guys,. A friend of mine bought a new A300-1N8 Toshiba without BONE a month ago. I installed Win XP Pro Sp3 and after 2 days of wondering how to activate DCIS (because in compability mode it was hellish slow), I found out how do and I've done my
-
I want to install Windows 7 to be able to play DVDs, I have to pay for the upgrade?
installation of Windows 7 Hi, I am running Windows XP and I would like to install Windows 7 in order to play DVDs. I pay for the upgrade? I am not very computer, is - this easy to install so free.Thank youJO Smith
-
HP envy 5660: 5660 connects to the Mac's domestic wireless network
I had problems to make my desire 5660 connected to my home wireless system that crosses a router from Apple. After a lot of struggle, my Macbook recognizes the driver (and the printer will produce reports). But whatever it is send to the printer is v